2N EntryCom IP Verso - I\O modul
- zwei Ein- und Ausgänge
- Relaiskontakt: 30V/1A AC/DC (NO/NC)
- Eingang für Sabotagekontakt
- kann im Basismodul und jedem Erweiterungsmodul installiert werden
- Buskabel im Lieferumfang enthalten
8-port 10/100/1000Mbit/s PoE Layer 2 Gigabit Ethernet Switch (8x 802.3af oder 4x 802.3at)
Highlights:
8-Port 10/100/1000Mbit/s with full PoE
PoE performance 4x 30 Watt (IEEE802.3at) or 8x 15,4 Watt (IEEE802.3af)
internal power supply
fanless Design
The ALL8808POE+ provides high power and data using Power over Ethernet (PoE) over Cat-5 cable. The Eight Gigabit Ethernet ports can be used for any 10/100/1000 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af and four ports can supply IEEE 802.3at power. ALL8808POE+ delivers PoE to any small business network that wants to simplify the installation of IP-Phone and IP-based surveillance cameras.
Technical Details:
Network standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.ab 1000BaseT
IEEE 802.3af PoE
IEEE 802.3at PoE
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p Class of Service
Switch Features
RJ-45 Ports: 8x 10/100/1000 Mbps
MAC Address: 8K
Buffer Memory: 2048K Bytes
Jumbo Frames: 9.6K
Transmission Method: Store and Forward
Management
N/A
Power
100~240V/AC, 50~60Hz
Power (without PoE)
Max. 5 watt
Power (with PoE)
Max. 150 watt
Case
Metal housing
265 × 184 × 44 mm (W x D x H)
Weight
0.95 kg
Operating
temperature
0 to 40?
Humidity
10 to 90% (non-condensing)
Certificates
FCC Class A, CE
ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6
Highlights:
PoE injector according to IEEE802.3af/at with max. power of 30W
2x RJ45 Gigabit Ports
PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-)
internal power supply unit
compact design
incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable
NEW: Wall mounting capable
Intelligent power supply via network without switch
With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets.
For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling.
Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch.
The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt.
The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet.
Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-).
Technical Details:
Element
Specifikation
Standards:
IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-Tx Fast Ethernet
IEEE802.3ab 1000Base-T Gigabit Ethernet
Support terminal equipment with IEEE802.3af/at, PoE++
RoHS Compliance
WEEE Compliance
Ethernet Ports:
1x RJ45 10/100/1000 Mbps for connection to switch or hub
1x RJ45 10/100/1000 for connection to PoE end device
PoE Output:
PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-)
Power supply:
100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length
Power consumption:
30 Watt maximum with connected PoE end device
AC Surge Protection:
1.0KV (5P/5N)
L-N 1.2/50 (8/20) Tr/Th us
2.0KV (5P/5N)
L-PE 1.2/50 (8/20) Tr/Th us
N -PE
Housing:
Plastic housing
Mounting:
Wall-mounted
Dimensions:
length/width/height: 140 x 63 x 33 mm
Environment:
Operating Temperature: 0 ~ 40 °C
Operating Humidity 10% ~ 90% (non-condensing)
Storage Temperature: -20 ~ 90 °C
Storage Humidity: 10% ~ 90% (non-condensing)
EMI:
FCC CFR47 Part 15
EN55024
EN55032
EMS:
IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
IEC61000-4-6(CS) 10V(150kHz~80MHz)
Immunity:
IEC60068-2-6(Vibration)
IEC60068-2-27(Impact)
IEC60068-2-32(Free Fall)
Marks:
CE; FCC
Komplett, für den sofortigen Einsatz in Ihrer Tür! Indoor IP65
Die Knaufmodule sind universell einsetzbare, batteriebetriebene Schließeinheiten.
Durch die Montage des Knaufmoduls mittels eines Euro-Profilzylinders sind herkömmliche Schlösser für DIN-Europrofil einsetzbar und keinerlei aufwändige Montagen nötig.
Das Set besteht aus folgenden Komponenten:
E-Zylinder Indoor einseitig lesend ( bitte benötigtes Zylindermaß bei Bestellung angeben!)
Preis gültig bis Zylindermaße von max 45/45.
Aufschlag für Sonderlänge 3 EURO pro 5mm.