Power supplies

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

Highlights:   Plug and Play installation Reliable surge protection for all devices with a network connection: • Switche, Router, Firewall, xDSL Modem, ISDN, NoteBook, PC / Server • Television • Multimedia Devices Protect your network equipment from power surges by lightning The ALLNET ALL95100 provides a cost-effective and reliable protection against damage to sensitive equipment. Housed in a compact body the ALLNET surge protection is simply inserted between the network cable or xDSL / ISDN connection and the equipment to be protected.   Without con guration the device is immediately protected from power surges. Along with a regular surge protector and bonding can be for example the infrastructure in safety-relevant areas permanently protected. Not only indoors, but also particularly like the outside, the ALL95100 is used effectively in conjunction with PoE enabled IP Cam‘s and wireless access points. Technical Details: Element Spezifikation Network Interface: 2x RJ45 10/100/1000Mbps PoE-Capability: IEEE802.3af, at, LTPoE++ bis 90W Arrest capacity: 10kA (8/20µs), 100A (10/1000µs) Ignition voltage: 90VDC ±20% (Pair to Earth) <450V (bei 100V/µs) <600V (bei 1kV/µs) Diff. Clamping: <15V, <5ns, 30Apk (Pair wire to wire) Diff. Capacity: <4.0pF Lines protected: (Pins)1 - 8 (at 8 pin modular plug) Test mark: IEEE 802.3, CAT 5, 6 ESD Protection: IEC 61000-4-2 class 4 (10kV CD) Housing: metal case Enviroment: Temperature operating: -15 ~ 40 °C Humidity operating: 10% ~ 95% (non condensed) Marks: CE, RoHS Maße: 82 x 25 x 25 mm (Length x Width x Height) weight: 200 Gramm Package content: -ALLNET ALL95100 -QIG

PoE Injector, 802.3AF Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.

ESD protection for outdoor high-speed networks. Protects outdoor Ethernet devices (2) Passive, surge-protected RJ45 connections Quick and easy installation Compatible with GbE networks Technical Specifications ETH-SP-G2 Dimensions 91 x 61 x 32.5 mm (3.58 x 2.4 x 1.28") Weight 80 g Weatherproofing IPX5 Interface Connections (2) RJ45 Female Connectors ESD/EMP Protection Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs DC Spark-Over Voltage 90V @ 100V/s Maximum Impulse Spark-Over Voltage 700V @ 1kV/µs Discharge Current 10kA+ Maximum Insulation Resistance 1G ohm @ 50V Maximum Capacitance 1.0 pF @ 1 MHz Data Line Protection RJ45 10/100/1000 Ethernet PoE Support Yes Shock and Vibration Certification ETSI300-019-1.4 Standard Operating Temperature -30 to 65° C (-22 to 149° F) Operating Humidity 10 to 90% Noncondensing

Input: 90-264VAC, 127~370VDC Output: 2.5A, 24V DC Operating temperature: -35°C to +70°C LxWxH 162.5x42.5x32mm No plug for sockets Please refer to the data sheet for exact technical details. The connection of electrical components and systems may only be carried out by only be carried out by qualified specialists!

An adapter that can power UniFi PoE+ devices, reduce dependence on the PoE switch power supply and provide a Gigabit LAN connection. Highlights: Delivers up to 30 W PoE+ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE+ output LED indicator for status monitoring Technical data: Dimensions 93 x 62 x 35 mm (3.7 x 2.4 x 1.4 inches) Weight 156 g (5.5 oz) Output voltage 48 V DC at 0.65 A LAN activity indicator NO Gigabit LAN connection Yes Remote reset function NO Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 0.75 A max Inrush current <100 A peak at 26 °C Efficiency 87 % Output ripple 1% max Switching frequency 70 kHz max. Line regulation = 3 % Load control = 5 % 2-pair power supply Pins 4, 5 (+) and 7, 8 (-) 4-pair power supply NO AC connection IEC-320 C6 Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL

Input: 90-264VAC, 127~370VDC Output: 4.2A, 24V DC Operating temperature: -25°C to +70°C LxWxH 190x52x37mm Please refer to the data sheet for exact technical details. The connection of electrical components and systems may only be carried out by only be carried out by qualified specialists!

Input: 180~305VAC, 254 ~ 431VDC Output: 6.3A, 24V DC, 151.2W Operating temperature: -25°C to +65°C LxWxH 191x63x37.5mm Please refer to the data sheet for exact technical details. The connection of electrical components and systems may only be carried out by only be carried out by qualified specialists!

Ubiquiti POE Injector, 48VDC, 24W (RocketTi, UAP-Pro) Modell GP-D480-050G 48V 0,5A Passives PoE, nur mit geeigneten Endgeräten betreiben!

HLG-240H-24B dimmable (1-10 Volt, PWM dimmer) , IP65 Input: 90-305VAC, 127-431VDC Output: 10A, 24V DC , 240 Watt Operating temperature: -40°C to +70°C LxWxH 244.2*68*38.8mm Protection markings: See meanwell.com Open cable ends

Highlights: Plug and Play installationReliable surge protection for all devices with a network connection: Switche, Router, Firewall, xDSL Modem, ISDN, NoteBook, PC / Server Television Multimedia DevicesProtect your network equipment from power surges by lightning The ALLNET ALL95100 provides a cost-effective and reliable protection against damage to sensitive equipment. Housed in acompact body the ALLNET surge protection is simply inserted between the network cable or xDSL / ISDN connection and theequipment to be protected.   Without con guration the device is immediately protected from power surges. Along with a regular surge protector and bondingcan be for example the infrastructure in safety-relevant areas permanently protected. Not only indoors, but also particularly like the outside, the ALL95100 is used effectively in conjunction with PoE enabled IP Cam'sand wireless access points.   Sample Application: Technical Details: Element Spezifikation Network Interface: 2x RJ45 10/100/1000Mbps PoE-Capability: IEEE802.3af, at, LTPoE++ up to 90W Arrest capacity: 10kA (8/20µs), 100A (10/1000µs) Ignition voltage: 90VDC ±20% (Pair to Earth) <450V (bei 100V/µs) <600V (bei 1kV/µs) Lines protected: (Pins)1 - 8 (at 8 pin modular plug) Test mark: IEEE 802.3, CAT 5/6, ADSL, VDSL, BRI ESD Protection: IEC 61000-4-2 class 4 (10kV CD) Housing: metal case Enviroment: Temperature operating: -15 ~ 40 °CHumidity operating: 10% ~ 95% (non condensed) Marks: CE, RoHS Maße: 82 x 25 x 25 mm (Length x Width x Height) weight: 200 Gramm Package content: -ALLNET ALL95100 -QIG

LED power supply unit for flush-mounted boxes Output: DC 12V, 1.A, max. 12 Watt Input: AC 100-240Vac Weight: 100g Size: 55*22mm

HLG-150H-24 dimmable (1-10 Volt, PWM dimmer) , IP65 Input: 90-305VAC Output: 6.3A, 24V DC , 151.2 Watt Operating temperature: -40°C to +70°C LxWxH 228x68x38.8mm Protection markings: See meanwell.com Open cable ends

An adapter that can power UniFi PoE+ devices, reduce dependence on the PoE switch power supply, and provide a multi-gigabit LAN connection. Highlights: Delivers up to 30 W PoE+ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE+ output LED indicator for status monitoring Technical data: Dimensions 93 x 62 x 35 mm (3.7 x 2.4 x 1.4 inches) Weight 156 g (5.5 oz) Output voltage 48 V DC at 0.65 A LAN activity indicator NO Gigabit LAN connection Yes, up to 2.5 GbE Remote reset function NO Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 0.75 A max Inrush current <150 A peak at 230 V alternating current Efficiency >87 % Output ripple 1% max Switching frequency 65 kHz max. Line regulation = 1 % Load control = 3 % 2-pair power supply Pins 4, 5 (+) and 7, 8 (-) 4-pair power supply NO Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL, UKCA, KC, CCC, RoHS

• Zellchemie: Lithium • Spannung: 3V • 2er-Pack

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

CYBERPOWER SNMP-network card for remote management and input for ENVSENSOR. Compatible with OR/OL/OLS/PR Serie, -Remote-Verwaltung und Konfguration der USV via Web-Browser oder NMS -Auto-Shutdown von Servern / Workstations um Daten bei Stromausfall zu sichern und schützen -Hot-Swap (Plug-n-Play) -TCP/IP, UDP, SNMP / HTTP, NTP, DNS, SMTP-Protokoll unterstützt -SNMP MIB verfügbar -Schnelle Installation und benutzerfreundliche Oberfläche -Security Management verfügbar -Kompatibel mit 10/100 Mbps Ethernet

Input: 90-264VAC, 127~370VDC Output: 5A, 12V DC Operating temperature: -35°C to +70°C LxWxH 162.5x42.5x32mm Please refer to the data sheet for exact technical details. The connection of electrical components and systems may only be carried out by only be carried out by qualified specialists!

SDR-240-48 For DIN Rail, top hat rail Input: 88~264VAC, 124~270VDC Output: 5A, 48V DC (48~55V) Ambient temperature: -25°C ~ +70°C LxWxH 63x125,2x113,5mm Protection flag: See meanwell.com for further data please refer to the data sheet

SDR-75-48 For DIN Rail Input: 88 ~ 264VAC, 124 ~ 370VDC Output: 1.6A, 48V DC , 75 Watt, adjustable approx. from 48V to 55V Ambient temperature: -30°C ~ +70°C, ensure sufficient ventilation. LxWxH 32 x 125,2 x 12 mm protection mark: see meanwell.com for further data please refer to data sheet

HLG-320H-24 dimmable (1-10 Volt, PWM dimmer) , IP67 Input: 90-305VAC Output: 13.34A, 24V DC , 320.16 Watt Operating temperature: -40°C to +70°C LxWxH 252x90x43.8mm Protection markings: See meanwell.com Open cable ends

input: 90-260VAC outout: DC12V/30W - 2-pin IP67 connector Size:196mm x 52mm x 30mm IP67

ROCK PI 4 Accessory Power Supply Adapter QC 3.0 Input: AC110-240V 50/60Hz 0.3A Output: DC5V=2.6A / 9V=1.7A / 12V=1.3A  

• Batterietechnologie: Lithium • Batteriespannung 3 V • Batteriekapazität 230 mAh • Retail Blister (1-Pack)