Power over Ethernet (PoE)

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

PoE Injector, 802.3AF Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.

ESD protection for outdoor high-speed networks. Protects outdoor Ethernet devices (2) Passive, surge-protected RJ45 connections Quick and easy installation Compatible with GbE networks Technical Specifications ETH-SP-G2 Dimensions 91 x 61 x 32.5 mm (3.58 x 2.4 x 1.28") Weight 80 g Weatherproofing IPX5 Interface Connections (2) RJ45 Female Connectors ESD/EMP Protection Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs DC Spark-Over Voltage 90V @ 100V/s Maximum Impulse Spark-Over Voltage 700V @ 1kV/µs Discharge Current 10kA+ Maximum Insulation Resistance 1G ohm @ 50V Maximum Capacitance 1.0 pF @ 1 MHz Data Line Protection RJ45 10/100/1000 Ethernet PoE Support Yes Shock and Vibration Certification ETSI300-019-1.4 Standard Operating Temperature -30 to 65° C (-22 to 149° F) Operating Humidity 10 to 90% Noncondensing

An adapter that can power UniFi PoE+ devices, reduce dependence on the PoE switch power supply and provide a Gigabit LAN connection. Highlights: Delivers up to 30 W PoE+ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE+ output LED indicator for status monitoring Technical data: Dimensions 93 x 62 x 35 mm (3.7 x 2.4 x 1.4 inches) Weight 156 g (5.5 oz) Output voltage 48 V DC at 0.65 A LAN activity indicator NO Gigabit LAN connection Yes Remote reset function NO Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 0.75 A max Inrush current <100 A peak at 26 °C Efficiency 87 % Output ripple 1% max Switching frequency 70 kHz max. Line regulation = 3 % Load control = 5 % 2-pair power supply Pins 4, 5 (+) and 7, 8 (-) 4-pair power supply NO AC connection IEC-320 C6 Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL

Ubiquiti POE Injector, 48VDC, 24W (RocketTi, UAP-Pro) Modell GP-D480-050G 48V 0,5A Passives PoE, nur mit geeigneten Endgeräten betreiben!

An adapter that can power UniFi PoE+ devices, reduce dependence on the PoE switch power supply, and provide a multi-gigabit LAN connection. Highlights: Delivers up to 30 W PoE+ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE+ output LED indicator for status monitoring Technical data: Dimensions 93 x 62 x 35 mm (3.7 x 2.4 x 1.4 inches) Weight 156 g (5.5 oz) Output voltage 48 V DC at 0.65 A LAN activity indicator NO Gigabit LAN connection Yes, up to 2.5 GbE Remote reset function NO Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 0.75 A max Inrush current <150 A peak at 230 V alternating current Efficiency >87 % Output ripple 1% max Switching frequency 65 kHz max. Line regulation = 1 % Load control = 3 % 2-pair power supply Pins 4, 5 (+) and 7, 8 (-) 4-pair power supply NO Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL, UKCA, KC, CCC, RoHS

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Ubiquiti 48 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-48-24W-G Dimensions 92 x 60 x 33 mm (3.62 x 2.36 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 48VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability No Reset Button No Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <65A Peak @ 120VAC, <130A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Highlights 2.5 Gigabit PoE+ injector compliant with IEEE 802.3af/at Up to 30 W PoE output power for high-performance end devices 2.5GBASE-T (10/100/1000/2500 Mbit/s) for maximum network performance Plug & Play – no configuration required Automatic detection of PoE-enabled devices Internal power supply (100–240 VAC) – no external power supply required Silent operation thanks to fanless metal housing Integrated overcurrent, short-circuit and overvoltage protection Status LEDs for power and PoE link Ideal for Wi-Fi access points, IP cameras, VoIP telephones and other PoE devices The ALLNET ALL0489v4 is a high-performance 2.5 Gigabit PoE+ injector that delivers data and power via a single network cable. With an output power of up to 30 watts in accordance with IEEE 802.3at, the injector is ideal for modern PoE devices such as Wi-Fi 6/6E/7 access points, IP cameras, VoIP telephones or industrial network devices. Thanks to its support for 10/100/1000/2500 Mbit/s, the ALL0489v4 can be easily integrated into existing multi-gigabit networks without limiting the data transfer rate. Automatic PoE detection ensures that only compatible devices are powered and reliably protects non-PoE devices. The integrated wide-range power supply (100–240 VAC) enables easy installation without the need for an external power supply. The robust metal housing with fanless, passive cooling ensures silent and reliable continuous operation – whether in the office or in industrial and surveillance applications. With comprehensive protection mechanisms against overcurrent, short circuits, ESD and overvoltage, the ALL0489v4 ensures safe operation even in demanding network environments. Typical applications (use cases) Wi-Fi 6 / Wi-Fi 7 access points Powering modern access points via a single network cable – ideal where there is no mains socket. IP video surveillance Power supply for PoE IP cameras with a 2.5-gigabit data connection for high-resolution video transmission. VoIP telephones Simple installation of IP telephones without a separate power supply unit. Network extensions Retrofitting PoE functionality to existing switches that do not support PoE. Industry & Building Automation Reliable power supply for industrial network devices, sensors and control systems. Digital signage Power supply for PoE-enabled displays, information terminals or kiosk systems. Smart buildings Use in access control systems, door intercoms, IoT gateways and other PoE applications. Target groups System houses and network integrators Electricians IT departments Businesses CCTV installers Smart building integrators Industrial and automation companies Data centres and server rooms Technical Details Technical Specifications Product Type 2.5 Gigabit PoE+ Injector Network Interfaces 1 × RJ45 10/100/1000/2500Base-T (Data In) 1 × RJ45 10/100/1000/2500Base-T PoE+ (Power & Data Out) Data Rate 10 / 100 / 1000 / 2500 Mbps PoE Standards IEEE 802.3af (15.4 W), IEEE 802.3at (30 W) Maximum PoE Output 30 W Supported Standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3bz IEEE 802.3af IEEE 802.3at Auto Negotiation Supported PoE Detection Automatic PD Detection LED Indicators Power (Green), PoE Link (Green) Power Supply Internal switching power supply, 100–240 VAC, 47–63 Hz, 54 VDC / 40 W Cooling Fanless Passive Cooling Housing Metal Housing Earthing Earthing Screw (GND) Protection Overcurrent Protection Short-circuit Protection ESD Protection Surge Protection ESD Protection IEC 61000-4-2 Contact ±4 kV, Air ±8 kV EFT Protection IEC 61000-4-4 Power 2 kV, LAN 1 kV Surge Protection IEC61000-4-5 Line-to-Line & Line-to-GND Level 3 (2 kV) MTBF > 50,000 hours @ 45°C Operating Temperature 0°C to +45°C Storage Temperature -20°C to +70°C Operating Humidity 10%–90% RH (non-condensing) Storage Humidity 5%–90% RH (non-condensing) Dimensions (W × D × H) 130 × 62 × 36 mm Compliance CE, FCC, VCCI Class B, CE LVD

Highlights: PoE and power via two-wire IEEE802.3af & now NEW for v2 series: IEEE802.3at Data rate max. 200Mbps Maximum distance: 500m via two-wire The master requires a 48VDC~57VDC power supply unit which is included, for optional power supply units see accessories Incl. power supply Overview The ALL-MC302v2P2WIRE set offers you the option of setting up both data and PoE via a 2-wire connection. The max. Cable length can be max. 500m. The master must be supplied with power via a power supply unit and supplies both the slave adapter and the PoE end device on the slave with data and power. The set is suitable for upgrading analogue systems through an existing cable infrastructure. The compact size of the media converter is perfect for replacing old door stations with a new IP door station.  Dimension: Interface description: Connection diagram: Table power, bandwidth and distance Receiver <- -> Transmitter Cable 2×0.75 mm² Receiver power supply type DC 48-56 (30 W) DC 48-56 (60 W) Distance 100 M Bandwidth (Mbps) 83 83 PoE (W) 27 27 Distance 200 M Bandwidth (Mbps) 82 82 PoE (W) 26.5 27 Distance 300 M Bandwidth (Mbps) 80 80 PoE (W) 26.3 27 Distance 400 M Bandwidth (Mbps) 78.2 78.2 PoE (W) 22.8 27 Distance 500 M Bandwidth (Mbps) 76 76 PoE (W) 18.2 26.5 Receiver <- -> Transmitter Coaxial cable Receiver power supply type DC 48-56 (30 W) DC 48-56 (60 W) Distance 100 M Bandwidth (Mbps) 84.2 84.2 PoE (W) 26.6 27 Distance 200 M Bandwidth (Mbps) 83.4 83.4 PoE (W) 26.2 27 Distance 300 M Bandwidth (Mbps) 82 82 PoE (W) 26 27 Distance 400 M Bandwidth (Mbps) 80 80 PoE (W) 22.2 27 Distance 500 M Bandwidth (Mbps) 79 79 PoE (W) 17.8 26 Note: Actual data speed and PoE performance may vary depending on environmental conditions and cable quality. Technical details: Ethernet Network standards IEEE 802.3 10BaseT  IEEE 802.3u 100BaseTX IEEE 802.3af Power over Ethernet PoE IEEE 802.3at Power over Ethernet PoE IEEE1901 PLC Up down Agreement CSMA/CA Transmission / Rate 500Mbps Physical Bandwidth 88Mbps Transmission Speed Cabling Cat5 or above Maximum Distance 100m Connector 1x RJ45 Twisted pair Cabling Twisted pair Connector 2-pin terminal block Distance up to 500m@24AWG Datarate downlink Up to 500Mbps Datarate Uplink Up to 500Mbps Technology Powerline Communication (PLC) Electric and Mechanical Input Power 48-57VDC (terminal block) Power Consumption =3.5W / PC PoE standard IEEE802.3af / IEEE802.3af "ONLY FOR v.2 SERIES" Output power Standard 48VDC; IEEE802.3af / IEEE802.3at "from v2 series" Port RJ45 Dimming (W x D x H) 123mm x 26mm x 26mm Weight 0.25kg Casing Aluminium case Environmental Operating Temperature -20°C to 60°C  Relative Humidity <95% (Non-condensation)

Produkt: Grandstream PoE Injektor Beschreibung: Grandstream PoE Injektor – zuverlässige Stromversorgung über Ethernet für Ihre Netzwerktechnik. In den Warenkorb

Highlights: support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) Automatic detection of whether the connected device is PoE capable   With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets.   So you can choose the best locations for example WLAN access points installations in a building regarding the wireless technology, without having to worry about power cabling.   Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch.   The ALLNET ALL048900V2 supports the IEEE802.3af standard with a power of 15,4 Watt, the IEEE802.3at high power standard with 30 Watt and the LT PoE with 90 Watt power.   The ALL048900V2 must not be configured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total.   The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.    Technical Details:   Element Spezification Standards: IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet enhancements LT PoE 90W IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE802.ab 1000BaseT Ethernet ports: 1x RJ45 10/100/1000Mbps for connection to passive switch or hub 1x RJ45 10/100/1000Mbps for connection to PoE device LED indikators: Power / PoE Act / Status Power input: 44~57V Power consumption:   System: 5W (Max.) LT PoE++: up to 90W   Attached power adapter: Input: 100~240VAC Output: 56VDC/2A, 112W (Max.) Case: Metal case, wall-mountable Dimension: Length/Width/Height: 102 x 75 x 23 mm Weight: 280g (o. Netzteil und Verpackung) Environment: Temperature operating: 0 ~ 40 °C Humidity operating: 10% ~ 90% (non-condensing) Temperature storage: -25 ~ 90 °C  Marks: FCC Class A, CE

Ubiquiti POE Injector, 50V, 60W , airFiber POE

Ubiquiti POE Injector, 24VDC, 12W Passives PoE, nur mit geeigneten Endgeräten betreiben!

Highlights: Outdoor IP68 Gigabit Repeater 1x 10/100/1000M PoE (IEEE802.3at POE+) INPUT 1x 10/100/1000M PoE (IEEE802.3at POE+) OUTPUT Max. OUTPUT Power 25W,  PoE Pin 1/2(+) 3/6 (-) Outdoor Temperature Range: -25°C bis +55°C Power over Ethernet, simply expand by 100m. The Power Over Ethernet Repeater ALLNET ALL-PR2012P-E extends the PoE and network range by another 100m. Depending on the PoE input power, up to 4 repeaters can be connected in series. We recommend e.g. the ALLNET ALL0489v3 PoE injector for the output power or any other PoE IEEE802.3at switch.   Technical Details: IEEE Standard: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE802.3af for POE IEEE802.3at for POE+ Network Connector: 1x 10/100/1000M PoE (IEEE802.3at POE+) INPUT 1x 10/100/1000M PoE (IEEE802.3at POE+) OUTPUT Power over Ethernet input: Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+) Power over Ethernet output: Pin Assignment and Polarity: 1/2 (+), 3/6 (-) Output power: up to 25W Maximum Distance: Expand Range up to max. 100m Connectors: Waterproof RJ-45, EIA 568A and 568B Network cables: Outdoor type shielded category 5 (or higher) Dimensions: 185mm x 45mm x 45mm Mounting: Wall or Shelf Environment: Indoor or Outdoor Environmental Conditions: Operating Ambient Temperature: -25 to 55°C Operating Humidity: Maximum 90%, noncondensing Storage Temperature: -30 to 70°C Storage Humidity: Maximum 95%, noncondensing

An adapter that can power UniFi PoE++ devices, reduce dependence on the PoE switch power supply and provide a Gigabit LAN connection. Highlights: Delivers up to 60 W PoE++ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE++ output LED indicator for status monitoring Technical data: Dimensions 106 x 63 x 34 mm (4.2 x 2.5 x 1.3 inches) Weight 210 g Output voltage 48 V DC at 1.25 A LAN activity indicator NO Gigabit LAN connection Yes Remote reset function NO Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 1.3 A with 120 V alternating current, 0.75 A with 230 V alternating current Inrush current <100 A peak at 120 V AC <200 A peak at 230 V AC Efficiency 85+ % Output ripple 1% max Switching frequency 65 kHz Line control = 1 % Load control = 3 % 2-pair power supply NO 4-pair power supply Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-) AC connection IEC-320 C6 Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Power method Universal AC input, 100–240 V AC, 50/60 Hz Power supply Alternating current/direct current Supported voltage range 100–240 V alternating current Max. PoE+ power per port through PSE 60 W Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS

 Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground   Technical Specifications Specifications Model POE-24-30W-G-WH Dimensions 94 _ 60 _ 33mm (3.70 x 2.36 x 1.30") Weight 156 g (5.5 oz) Output Voltage 25VDC @ 1.25A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability No Reset Button No Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 83+% Output Ripple 1% Max. Switching Frequency 65kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70° C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 _s) Power Peak Pulse Current 36A (10/1000 _s) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

TP-Link - PoE160S - PoE+ Injector Adapter PORT: 1× Gigabit PoE Port, 1× Gigabit Non-PoE Port SPEC: 802.3at/af Compliant, Data and Power Carried over The Same Cable Up to 100 Meters, Plastic Case, Pocket Size

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Ubiquiti POE Injector, 24VDC, 24W Passives PoE, nur mit geeigneten Endgeräten betreiben!      

An adapter that can power UniFi PoE++ devices, reduce dependency on the PoE switch power supply, and provide a multi-gigabit LAN connection. Highlights: Delivers up to 60 W PoE++ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE++ output LED indicator for status monitoring Technical data: Dimensions 106 x 63 x 34 mm (4.2 x 2.5 x 1.3 inches) Weight 210 g Output voltage 54 V DC at 1.12 A LAN activity indicator NO Gigabit LAN connection Yes, up to 10 GbE Remote reset function No Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 1.5 A max Inrush current <150 A peak at 230 V alternating current Efficiency >88 % Output ripple 1% max Switching frequency 65 kHz Line control = 2 % Load control = 5 % 2-pair power supply NO 4-pair power supply Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-) Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Max. PoE+ power per port through PSE 60 W Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL, UKCA, KC, CCC, RoHS

Wall Mount for Ubiquiti PoE injectors. Wall-mountable Compatible with 24V DC PoE Injectors

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground       Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL