PoE injectors

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

PoE Injector, 802.3AF Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.

An adapter that can power UniFi PoE+ devices, reduce dependence on the PoE switch power supply and provide a Gigabit LAN connection. Highlights: Delivers up to 30 W PoE+ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE+ output LED indicator for status monitoring Technical data: Dimensions 93 x 62 x 35 mm (3.7 x 2.4 x 1.4 inches) Weight 156 g (5.5 oz) Output voltage 48 V DC at 0.65 A LAN activity indicator NO Gigabit LAN connection Yes Remote reset function NO Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 0.75 A max Inrush current <100 A peak at 26 °C Efficiency 87 % Output ripple 1% max Switching frequency 70 kHz max. Line regulation = 3 % Load control = 5 % 2-pair power supply Pins 4, 5 (+) and 7, 8 (-) 4-pair power supply NO AC connection IEC-320 C6 Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL

Ubiquiti POE Injector, 48VDC, 24W (RocketTi, UAP-Pro) Modell GP-D480-050G 48V 0,5A Passives PoE, nur mit geeigneten Endgeräten betreiben!

An adapter that can power UniFi PoE+ devices, reduce dependence on the PoE switch power supply, and provide a multi-gigabit LAN connection. Highlights: Delivers up to 30 W PoE+ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE+ output LED indicator for status monitoring Technical data: Dimensions 93 x 62 x 35 mm (3.7 x 2.4 x 1.4 inches) Weight 156 g (5.5 oz) Output voltage 48 V DC at 0.65 A LAN activity indicator NO Gigabit LAN connection Yes, up to 2.5 GbE Remote reset function NO Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 0.75 A max Inrush current <150 A peak at 230 V alternating current Efficiency >87 % Output ripple 1% max Switching frequency 65 kHz max. Line regulation = 1 % Load control = 3 % 2-pair power supply Pins 4, 5 (+) and 7, 8 (-) 4-pair power supply NO Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL, UKCA, KC, CCC, RoHS

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Ubiquiti 48 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-48-24W-G Dimensions 92 x 60 x 33 mm (3.62 x 2.36 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 48VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability No Reset Button No Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <65A Peak @ 120VAC, <130A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Highlights 2.5 Gigabit PoE+ injector compliant with IEEE 802.3af/at Up to 30 W PoE output power for high-performance end devices 2.5GBASE-T (10/100/1000/2500 Mbit/s) for maximum network performance Plug & Play – no configuration required Automatic detection of PoE-enabled devices Internal power supply (100–240 VAC) – no external power supply required Silent operation thanks to fanless metal housing Integrated overcurrent, short-circuit and overvoltage protection Status LEDs for power and PoE link Ideal for Wi-Fi access points, IP cameras, VoIP telephones and other PoE devices The ALLNET ALL0489v4 is a high-performance 2.5 Gigabit PoE+ injector that delivers data and power via a single network cable. With an output power of up to 30 watts in accordance with IEEE 802.3at, the injector is ideal for modern PoE devices such as Wi-Fi 6/6E/7 access points, IP cameras, VoIP telephones or industrial network devices. Thanks to its support for 10/100/1000/2500 Mbit/s, the ALL0489v4 can be easily integrated into existing multi-gigabit networks without limiting the data transfer rate. Automatic PoE detection ensures that only compatible devices are powered and reliably protects non-PoE devices. The integrated wide-range power supply (100–240 VAC) enables easy installation without the need for an external power supply. The robust metal housing with fanless, passive cooling ensures silent and reliable continuous operation – whether in the office or in industrial and surveillance applications. With comprehensive protection mechanisms against overcurrent, short circuits, ESD and overvoltage, the ALL0489v4 ensures safe operation even in demanding network environments. Typical applications (use cases) Wi-Fi 6 / Wi-Fi 7 access points Powering modern access points via a single network cable – ideal where there is no mains socket. IP video surveillance Power supply for PoE IP cameras with a 2.5-gigabit data connection for high-resolution video transmission. VoIP telephones Simple installation of IP telephones without a separate power supply unit. Network extensions Retrofitting PoE functionality to existing switches that do not support PoE. Industry & Building Automation Reliable power supply for industrial network devices, sensors and control systems. Digital signage Power supply for PoE-enabled displays, information terminals or kiosk systems. Smart buildings Use in access control systems, door intercoms, IoT gateways and other PoE applications. Target groups System houses and network integrators Electricians IT departments Businesses CCTV installers Smart building integrators Industrial and automation companies Data centres and server rooms Technical Details Technical Specifications Product Type 2.5 Gigabit PoE+ Injector Network Interfaces 1 × RJ45 10/100/1000/2500Base-T (Data In) 1 × RJ45 10/100/1000/2500Base-T PoE+ (Power & Data Out) Data Rate 10 / 100 / 1000 / 2500 Mbps PoE Standards IEEE 802.3af (15.4 W), IEEE 802.3at (30 W) Maximum PoE Output 30 W Supported Standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3bz IEEE 802.3af IEEE 802.3at Auto Negotiation Supported PoE Detection Automatic PD Detection LED Indicators Power (Green), PoE Link (Green) Power Supply Internal switching power supply, 100–240 VAC, 47–63 Hz, 54 VDC / 40 W Cooling Fanless Passive Cooling Housing Metal Housing Earthing Earthing Screw (GND) Protection Overcurrent Protection Short-circuit Protection ESD Protection Surge Protection ESD Protection IEC 61000-4-2 Contact ±4 kV, Air ±8 kV EFT Protection IEC 61000-4-4 Power 2 kV, LAN 1 kV Surge Protection IEC61000-4-5 Line-to-Line & Line-to-GND Level 3 (2 kV) MTBF > 50,000 hours @ 45°C Operating Temperature 0°C to +45°C Storage Temperature -20°C to +70°C Operating Humidity 10%–90% RH (non-condensing) Storage Humidity 5%–90% RH (non-condensing) Dimensions (W × D × H) 130 × 62 × 36 mm Compliance CE, FCC, VCCI Class B, CE LVD

Produkt: Grandstream PoE Injektor Beschreibung: Grandstream PoE Injektor – zuverlässige Stromversorgung über Ethernet für Ihre Netzwerktechnik. In den Warenkorb

Highlights: support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) Automatic detection of whether the connected device is PoE capable   With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets.   So you can choose the best locations for example WLAN access points installations in a building regarding the wireless technology, without having to worry about power cabling.   Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch.   The ALLNET ALL048900V2 supports the IEEE802.3af standard with a power of 15,4 Watt, the IEEE802.3at high power standard with 30 Watt and the LT PoE with 90 Watt power.   The ALL048900V2 must not be configured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total.   The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.    Technical Details:   Element Spezification Standards: IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet enhancements LT PoE 90W IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE802.ab 1000BaseT Ethernet ports: 1x RJ45 10/100/1000Mbps for connection to passive switch or hub 1x RJ45 10/100/1000Mbps for connection to PoE device LED indikators: Power / PoE Act / Status Power input: 44~57V Power consumption:   System: 5W (Max.) LT PoE++: up to 90W   Attached power adapter: Input: 100~240VAC Output: 56VDC/2A, 112W (Max.) Case: Metal case, wall-mountable Dimension: Length/Width/Height: 102 x 75 x 23 mm Weight: 280g (o. Netzteil und Verpackung) Environment: Temperature operating: 0 ~ 40 °C Humidity operating: 10% ~ 90% (non-condensing) Temperature storage: -25 ~ 90 °C  Marks: FCC Class A, CE

Ubiquiti POE Injector, 50V, 60W , airFiber POE

Ubiquiti POE Injector, 24VDC, 12W Passives PoE, nur mit geeigneten Endgeräten betreiben!

An adapter that can power UniFi PoE++ devices, reduce dependence on the PoE switch power supply and provide a Gigabit LAN connection. Highlights: Delivers up to 60 W PoE++ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE++ output LED indicator for status monitoring Technical data: Dimensions 106 x 63 x 34 mm (4.2 x 2.5 x 1.3 inches) Weight 210 g Output voltage 48 V DC at 1.25 A LAN activity indicator NO Gigabit LAN connection Yes Remote reset function NO Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 1.3 A with 120 V alternating current, 0.75 A with 230 V alternating current Inrush current <100 A peak at 120 V AC <200 A peak at 230 V AC Efficiency 85+ % Output ripple 1% max Switching frequency 65 kHz Line control = 1 % Load control = 3 % 2-pair power supply NO 4-pair power supply Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-) AC connection IEC-320 C6 Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Power method Universal AC input, 100–240 V AC, 50/60 Hz Power supply Alternating current/direct current Supported voltage range 100–240 V alternating current Max. PoE+ power per port through PSE 60 W Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS

 Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground   Technical Specifications Specifications Model POE-24-30W-G-WH Dimensions 94 _ 60 _ 33mm (3.70 x 2.36 x 1.30") Weight 156 g (5.5 oz) Output Voltage 25VDC @ 1.25A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability No Reset Button No Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 83+% Output Ripple 1% Max. Switching Frequency 65kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70° C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 _s) Power Peak Pulse Current 36A (10/1000 _s) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

TP-Link - PoE160S - PoE+ Injector Adapter PORT: 1× Gigabit PoE Port, 1× Gigabit Non-PoE Port SPEC: 802.3at/af Compliant, Data and Power Carried over The Same Cable Up to 100 Meters, Plastic Case, Pocket Size

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Ubiquiti POE Injector, 24VDC, 24W Passives PoE, nur mit geeigneten Endgeräten betreiben!      

An adapter that can power UniFi PoE++ devices, reduce dependency on the PoE switch power supply, and provide a multi-gigabit LAN connection. Highlights: Delivers up to 60 W PoE++ Overvoltage, pulse peak and overcurrent protection Includes RJ45 data input, AC cable with earthing and PoE++ output LED indicator for status monitoring Technical data: Dimensions 106 x 63 x 34 mm (4.2 x 2.5 x 1.3 inches) Weight 210 g Output voltage 54 V DC at 1.12 A LAN activity indicator NO Gigabit LAN connection Yes, up to 10 GbE Remote reset function No Reset button NO Nominal voltage 100–240 V alternating current at 50/60 Hz Input current 1.5 A max Inrush current <150 A peak at 230 V alternating current Efficiency >88 % Output ripple 1% max Switching frequency 65 kHz Line control = 2 % Load control = 5 % 2-pair power supply NO 4-pair power supply Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-) Data input/PoE RJ45 shielded socket &overvoltage protection Difference and common mode Clamp protection 11 V data, 60 V current Max. Surge discharge 1500A (8/20 µs) power Peak pulse current 36A (10/1000 µs) data Shunt capacitance <5 pF data Response time <1 ns Max. PoE+ power per port through PSE 60 W Operating ambient temperature 0 to 40 °C (32 to 104 °F) Storage temperature -30 to 70 °C (-22 to 158 °F) Humidity during operation 10 to 95 % non-condensing Certifications CE, FCC, IC, UL, UKCA, KC, CCC, RoHS

Wall Mount for Ubiquiti PoE injectors. Wall-mountable Compatible with 24V DC PoE Injectors

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground       Technical Specifications POE-24-7W-G-WH (Low-Power) Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G (Mid-Power) Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G (Hi-Power) Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices. Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground     Technical Specifications Specifications Model POE-54V-80W Dimensions 123 x 65 x 34 mm (4.84 _ 2.56 _ 1.34”) Weight 299 g (10.55 oz) Output Voltage 54VDC @ 1.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability No Reset Button No Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.8A @ 120VAC, 0.4A @ 240VAC Inrush Current <80A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 87+% Output Ripple 1% Max. Switching Frequency 100 kHz Max. Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering – 4-Pair Powering Pins 1, 2, 4, 5 (+) and Pins 3, 6, 7, 8 (-) Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 _s) Power Peak Pulse Current 36A (10/1000 _s) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

TP-Link POE150S (UN) – PoE Injector für 802.3af GeräteDer TP-Link POE150S (UN) ist ein kompakter PoE-Injektor, der Netzwerkgeräte wie Access Points, IP-Kameras oder VoIP-Telefone über ein einziges Ethernet-Kabel mit Strom und Daten versorgt. Er unterstützt den PoE-Standard 802.3af und bietet eine einfache Lösung zur Stromversorgung von PoE-fähigen Geräten.Wichtige Features: PoE Standard – Unterstützt 802.3af (PoE) Maximale Leistung – Bis zu 15,4 Watt Leistung pro Port Einfache Installation – Plug-and-Play ohne Konfiguration Kompaktes Design – Platzsparend und flexibel einsetzbar Schutzmechanismen – Überstrom-, Überspannungs- und KurzschlussschutzPerfekt geeignet für: Netzwerkgeräte mit PoE-Unterstützung wie Access Points und IP-Kameras Umgebungen ohne PoE-Switches Einfache Erweiterung bestehender NetzwerkeTechnische Daten im Überblick: Eigenschaft Details Modell POE150S (UN) PoE Standard 802.3af Max. Ausgangsleistung 15,4 Watt Netzwerkgeschwindigkeit 10/100/1000 Mbps Anschluss RJ45 Ethernet Schutzfunktionen Überstrom-, Überspannungs- und Kurzschlussschutz

60 Watt PoE Injektor für alle Siklu-Geräte, deren maximale Leistungsaufnahme 60 Watt nicht überschreitet. EH-60W-AC-PoE-EU od. AX-IN-60W-AC-PoE-EU