2N Zubehör • IP Base • Montageplatte

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

2N EntryCom (Helius) IP Verso - 5 nameplates module

2N EntryCom (Helius) IP Verso - keypad module

2N EntryCom (Helius) IP Verso - infopanel

2N cover box 1M - surface installation frame for 1 module

2N cover box 2M - surface installation frame for 2 modules

2N cover box 3M - surface installation frame for 3 modules

2N flush installation frame for 1 module (must be together with 9155014)

2N flush installation frame for 2 modules (must be together with 9155015)

2N flush installation frame for 3 modules (must be together with 9155016)

2N EntryCom (Helius) IP Verso - flush mount installation box for 1 module (must be together with 9155011)

2N EntryCom (Helius) IP Verso - flush mount installation box for 2 modules (must be together with 9155012)

2N EntryCom (Helius) IP Verso - flush mount installation box for 3 modules (must be together with 9155013)

Erweitern Sie Ihre Gegensprechanlage mit zwei logischen Eingängen und zwei Relaisausgängen. Um die Sicherheit zu erhöhen, können Sie verschiedene Sensoren an die Sprechanlage anschließen, um Licht oder andere Geräte zu steuern. Installieren Sie das Modul unter einem anderen Modul, da es keine eigene Position benötigt. 2N EntryCom IP Verso - I\O Modul - zwei Ein- und Ausgänge - Relaiskontakt: 30V/1A AC/DC (NO/NC) - Eingang für Sabotagekontakt - kann im Basismodul und jedem Erweiterungsmodul installiert werden - Buskabel im Lieferumfang enthalten

2N EntryCom (Helius) IP Verso - Wiegand module

2N EntryCom (Helius) IP Verso - Extension cable

2N Induction Loop for EntryCom (Helius) IP