ALLNET ALL1682511v2 / 500Mbps Powerline + 300Mbps AP 2,4/5Gh
MSRP: €57.33
Available, delivery time: 1-2 Tage
Product information "ALLNET ALL1682511v2 / 500Mbps Powerline + 300Mbps AP 2,4/5Gh"
2in1: 500 Mbit Powerline Bridge with WiFi N Accesspoint, 2x LAN Ports
Highlights:
- 500 Mbps Homeplug AV
- 300 Mbps Wireless N Access Point
- 2,4Ghz or 5 Ghz selectable
- WPS Button
- 2nd LAN/Network-Port
ALL1682511v2 is a 500Mbps HomePlug Adapter + 300Mbps Wireless N Extender 2x2 dual-band (2.4/5 GHz). ALL1682511v2 embarks on a concept of No New Wires data communications, and it transforms your in-house powerline into a networking infrastructure and a WLAN connection. It successfully reduce “blind spot”, increase throughput and increase network coverage within a home. Surf the Internet and share data at the speed up to 500Mbps Phy rates through powerline, 300Mbps via Wireless, in any outdoor environment - and rest assured with the best security from eavesdroppers through encryption on the power circuit and WLAN.
ALL1682511v2 HomePlug engine is a Qualcomm Atheros AR7420 chipset. It features faster processing power, Fast Ethernet host interfaces and an enhanced analog front end. The solution is compliance with IEEE1901 and Homeplug AV, hence allowing hassle free compatibility with existing Homeplug AV devices and other suppliers of IEEE1901 PLC (Powerline Line Communication) devices. As for the Wireless, it is using Qualcomm Atheros AR9344 2x2 2.4/5 GHz Wireless N SoC chipset. Enhanced Quality of Service (QOS) also provides the guaranteed bandwidth reservations for multimedia payloads including TV over IP (IPTV), higher data rate broadband sharing, Online-Gaming, VoIP Calls, extending Wireless LANs coverage, Audio-Video transmission across the network as well as Network camera connectivity. ALL1682511v2 provides a simple connect push button for a convenient way of creating HomePlug network without the need to using the Device Utility from a computer. The security feature is supported by 128-bit AES Hardware encryption. As for WLAN security feature,
it is supported by WPA, WPA2, and WAP. Ensuring the network communications is free from eavesdroppers and hackers.
Technical Details:
|
Elements |
Specifications |
|
PLC Chipset: |
Atheros AR7420+1540 |
|
WiFi Chipset |
Atheros AR9344 |
|
Standards: |
Powerline -> HomePlug AV |
|
Brutto Datenrate Powerline: |
max. 500Mbps |
|
Brutto Datenrate Wireless: |
max. 300Mbps, 2Tx2R |
|
Frequency PLC Band: |
2~28 MHz |
|
Frequency WiFi: |
2,4 GHz / 5Ghz selectable |
|
Access-Methode Powerline: |
TDMA and priority-based CSMA/CA |
|
Access-Methode Wireless: |
CSMA/CA,EDCA |
|
Quality of Service: |
4 Levels
|
|
PLC Modulation: |
OFDM 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO |
|
WiFi Modulation: |
CCK,BPSK,DQPSK, QPSK, QAM |
|
PLC Adapter Power Connector/Plug: |
100V~240V EURO |
|
Network Ports: |
2x RJ45 10/100Mbit |
|
PLC Security: |
128-bit AES Link Encryption with key management |
|
WiFi Security: |
|
|
LED Indicators: |
|
|
Power: |
100~240 VAC, 50/60 Hz |
|
Power Consumption: |
Working mode 3,6W Watt, Standby max. 0,5 Watt |
|
OS Environmental: |
all TCP/IP compatible OS |
|
OS Environmental for Configuration: |
Windows® XP32bit, Windows® Vista32/64bit, Windows®7 32/64bit |
|
Housing: |
Plastic |
|
Environmental Temperature: |
Temperature: 0 ~ 40 °C |
|
Marks: |
CE |
|
Dimension: |
62 mm x 92mm x 42 mm |
|
Weight: |
140 Gramm (device only) |
|
Package content: |
|
Phase coupler for power line networks for installation in the fuse box (top-hat rail). Highlights: 3-phase version Frequency range 1-70 MHz AC 250 / 440 V, 4 x 22nFX2, 3-phase CE approved installation width: 34mm Installation depth: 70mm max. Interconnects all phases/Phase coupler of the home power system and makes the powerline signal available on all outlets in a circuit. For coupling between sub-distribution boards or across RCDs and electricity meters, only ALL16881PC (Art. 112411) may be used! Attention. This article must only be installed by authorised and qualified persons. Technical Details: Frequency Range: 0-70Mhz Nominal Voltage: AC 250/440V 4x22nFX2, 3 phase Temperature Range: -25°C - 100°C Installation width: 34mm Installation depth: 70mm max. Mounting: DIN rail mounting Mark: CE
Available, delivery time: 1-2 Tage
Powerline Phase Coupler for Power Line networks for installation in the fuse box (DIN-Rail) Highlights: ALL16881PC AC 250 / 440 V 50/60Hz Multiple Phases phase coupler for multiple Phases "Coupling to other PLC networks" DIN-Rail installation Frequency range 1-70 MHz Suitable for PLC Signal coupling over circuit breaker and multiple electric meters CE-proved Combines all phases of the home power network with each other and makes the Powerline signal to electrical power sockets in a circuit available. About the fourth LX-phase cross-connections can be implemented to other circuits when electricity meter, earth leakage (GFCI), circuit breakers and similar obstacles for power line communications must be overcome. Circuit diagram for electrician: See manual for more details. 2 application examples are listed in the manual. For further application examples please contact our support support@allnet.de. Technical Details: Frequency Range: 0-70Mhz Nominal Voltage: AC 250/440V 4x22nFX2, 3 phase Temperature Range: -25°C - 100°C Installation width: 34mm Installation depth: 70mm max. Mounting: DIN rail mounting Mark: CE
Available, delivery time: 1-2 Tage
ALL168x AC 250/440V, 4x 22nFX2, 3-phase KC002-923/271-500 Eichoff Phase Coupler, 3-phase version with LX "coupling with other networks", frequency range 1-40 MHz, CE and VDE approved. ** Attention: This article may be installed only by authorized specialized workshops. The mounting should be installed after the FI circuit breaker. ** Technical Details: Frequency Range: 1-140Mhz Nominal Voltage: AC 250/440V Temperature Range: -25°C - 100°C Approval: CE, VDE
Available, delivery time: 1-2 Tage
With the help of this Eichhoff powerline filter, you can "lock" Powerline subsegments to larger installations such as hotels or to network similar with powerline technology. Because of this reject-filter, the segments do not interfere with each other.The reject-filter is designed for a capacity of 16A power for DIN rail mounting.The frequency range is between 2.0 to 40 Mhz. Temperature range: -25°C bis +100 °C ** Attention: This product may only be installed by authorized specialist workshops! **
Available, delivery time: 1-2 Tage
With the help of this Eichhoff powerline filter, you can "lock" Powerline subsegments to larger installations such as hotels or to network similar with powerline technology. Because of this reject-filter, the segments do not interfere with each other.The reject-filter is designed for a capacity of 25A power for DIN rail mounting.The frequency range is between 2.0 to 40 Mhz. Temperature range: -25°C bis +100 °C ** Attention: This product may only be installed by authorized specialist workshops! **
Available, delivery time: 1-2 Tage