ALLNET / ALL95100 TP Cat 6 / PoE Surge arrester

ALLNET TP Cat 6 overvoltage/lightning protection for ALL95100 top-hat rail mounting bracket Our new top-hat rail clamp offers you a reliable and heat-resistant solution for your mounting requirements. Equipped with high-quality 3M adhesive tape, the clip can be easily attached to the ALL95100 and ALL95101 models and ensures a secure hold even under demanding conditions. Advantages at a glance: Perfect fit for ALL95100 and ALL95101 Robust plastic for long-lasting stability Heat-resistant 3M adhesive tape for optimum adhesion Perfect for professional applications where reliability is required. Get your top-hat rail clamp and experience the quality for yourself!

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

LED Outdoor Spot 20W, Light colour: infrared, 850nm, Housing: light grey Fastening: Stainless steel mounting bracket Connection: RJ-45 for PoE IEEE 802.af / IEEE 802.3at PoE injector or PoE switch is required (not included in the scope of delivery) Protection class: IP65, Operating temperature: -20°C to +40°C Weight: 3.5kg Beam angle: 120° Range up to 30 metres Size: 240*220*75mm

TECHNISCHE MERKMALE Kabeltyp Anschlusskabel Anschluss Seite A Stecker TAE4F Anschluss Seite B Stecker RJ45 Adernzahl 2 Kabelfarbe schwarz Kabellänge 0,5 m Verdrahtung A-4, B-5,

TECHNISCHE MERKMALE Kabeltyp Anschlusskabel Anschluss Seite A Stecker TAE4F Anschluss Seite B Stecker RJ45 Adernzahl 2 Kabelfarbe schwarz Kabellänge 2 m Verdrahtung A-4, B-5,

RJ11 Stecker/RJ45 Stecker 1:1 geschaltet, 3 m Länge, Kabel wird benöti gt z.B. für ALL130 oder Telefone in eine r struktuerierten IT Verkabelung

RJ11-6P4C/RJ45-8P4C verbindung Telefon/Modem an DSL-Splitter

RJ11-6P4C/RJ45-8P4C Verbindung Telefon/Modem an DSL-Splitter

RJ11-6P4C/RJ45-8P4C Verbindung Telefon/Modem an DSL-Splitter

RJ11 Stecker/RJ45 Stecker 1:1 geschaltet, 3 m Länge, Kabel wird benöti gt z.B. für ALL130 oder Telefone in eine r struktuerierten IT Verkabelung

Stecker/Buchse, TAE-F/RJ11 Pin 1-3, 2-4, 3-2, 4-5