ALLNET Ersatznetzteil 12V/2,5A Unterputznetzteil rund Standa

Small 4-inch display for integration into the home automation system, as a control panel for light and sound, etc. Special feature: 2 microphones have been installed and the device offers interfaces for RS485, alarm, doorbell, audio output with amplifier, etc.   System Dimension 86.6mm*86.6mm*35.3mm Display size 4 inch CPU RK3128 Quad-core cortex-A7 ,1.2Ghz System  Android 7.1 Resolution  480*480 Touch Panel  5 points capactive touch panel, IPS RAM 1G Rome 8G Network WIFI  802.11b/g/n Blue-tooth  BT 4.0  Ethernet 10M/100M I/O ports RJ45  Ethernet interface input (RJ-45 cable) , POE option SD Card Yes USB  Mirco USB RS485 RS485*1 Serial port Serial port *2 Doorbell port Support Alarm interface Support AUX Build in Power suply  AC 110~240V , 50HZ Features Microphone 2x build in Cooling method Air-Cooled Media format Video MOV 1080P / AVI / WMV / RM / RMVB / 3GP / MKV / MP4 / ASF/ VOB Audio MP3 / WMA / WAV / AAC / FLAC / OGG Others Camera No camera Battery No Mount  wall mounted / in wall  & embedded Colour Black Power consumption 2x10W MAX Physical button Power on/off Working temperature .-5°~70° Language multi-language support

ALLNET Meeting Room LED Tablet 10 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)                                                                                      Update to Android 10 possible: write to support@allnet.de Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Due to the NFC, time recording terminals can also be implemented very well or info terminals with ID, such as multi-party residential complexes.  Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera we did not address. AIDA time works according to manufacturer with our part numbers 174715/174716/174717/174888 u. 182897 The API/SDK for NFC/RFID and LED are available on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface that for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols - NFCIP-1, NFCIP-2 protocol (see [8] and [11]) - ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) - NFC Forum T3T via host interface - ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  - FeliCa PCD mode - MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) - NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) - ISO/IEC 15693/ICODE VCD mode (see [9]) For further information please refer to the NFC data sheet. System CPU   RK3288,Quad-core cortex A17,1.6G RAM   2GB Internal memory  16GB Operation system Android 8.1     Touch screen 10-Point capacitive touch Display Panel   10.1"LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio ,16:10 Network WiFi   2,4/5GHz 802.11a/b/g/n/ac Ethernet   100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot   SD card USB    USB Host Micro USB  Micro USB OTG USB    USB for serial RJ45 with POE RJ45  POE   IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo   jpeg Other VESA   204.5mm NFC   N/A(Optional to add NFC with 13.56M frequency)/RFID NXP Desfire Camera   5.0M/P,Front camera Microphone Microphone Speaker   2*1.5W LED Light bar LED light bar with RGB and mixed color Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter   Adapter,12V/1.5A User manual yes Touch Power Button Touch Button in Front to switch on and off if mounted inside a wall.   Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  275.36mm 170.36mm 25mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG              

ALLNET Medical PoE Tablet 8 inch with RK3288 Android 8/10, 2GB/32GB optional one-touch button with microphone for e.g. emergency call function (API) for integration into your own software   System RAM   2GB Internal memory  32GB Operation system Android 8.1/10     Touch screen 10-Point capacitive touch Display Panel   10.1"LCD panel Resolution 1280*800 Display mode Normally black viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 250cdm2 Aspect Ratio 16:9 Network WiFi   802.11b/g/n/ac,2.4G/5G Ethernet 100M/1000M Bluetooth Bluetooth 4.0 Interface Type-c Support Power Jack  DC power input RJ45   POE,  IEEE802.3af, 15.4 Watt, USB   USB Host 2.0 Serial   8P- 2.0MM ( RS232 fomat) Earphone 3.5mm earphone +microphone Media plays Video format MPEG-1,MPEG-2,MPEG-4,H.265,H.264,VC-1,VP8, etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo   jpeg Other Vesa   100mm*100mm  NFC   NXP NFC Speaker   2*2W Camera   5.0M/P,front camera Internal Microphone Dual microphone ( default) Language Multi-language Working temp 0--40degree Certificates     Adapter   Adapter,12V/1.5A Measurement 266.1 x 184.9 x 28.9mm      

ALLNET Meeting Room LED Tablet 13 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)                                                                                            Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Through the NFC can also be implemented very well time recording terminals or info terminals with ID, such as multi-party apartment complexes.    Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera is not addressed AIDA time     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer We will gladly provide the API/SDK for NFC/RFID and LED on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface, for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU  RK3288,Quad-core cortex A17,1.6G RAM  2GB Internal memory  16GB Operation system Android 8.1/10    Display Touch screen 10-Point capacitive touch Panel  13" LCD panel Resolution 1920x1080 Active area 293(H)x164mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:9 Network WiFi  2.4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56M frequency)/RFID NXP Desfire Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/2.5A User manual yes          

ALLNET Meeting Room LED Tablet 15 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)                                                                                      Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Through the NFC can also be implemented very well time recording terminals or info terminals with ID, such as multi-party apartment complexes.  Currently tested Android time terminal software:  PDS Zeit funktioniert, Configfile muss aber manuell eingespielt werden, Kamera wir nicht angesprochen AIDA-Zeit     funktioniert laut Hersteller mit unseren Artikelnummern 174715/174716/174717/174888 u. 182897 We will gladly provide the API/SDK for NFC/RFID and LED on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface, for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet.

The ALLNET DS10 is a special display for integration into PBXs and door stations. The SIP integration makes it possible to integrate the display as a telephone in a PBX, e.g. Fritz Box, 3CX etc.. It is also possible to configure the display as a PBX. I.e. you can use it as a PBX for telephony. Another special feature is the possibility to store action URL's as buttons. With this it is possible to call the lift or to operate a door opener. 2 built-in relays can also be controlled to realize further switching operations. The built-in SOS function is especially suitable for elderly people. It is possible to store several phone numbers which can be called simultaneously. Playstore integration for integration into home automation solutions and flexible use, automatic display shutdown and touch to wake function. Technical Details Front panel: Plastic RAM / ROM: 2GB / 8GB Display: 10 Inch IPS LCD Screen: 10 Inch capacitive touch screen Wi-Fi: IEEE802.11 b/g/n, @2.4GHz BLE: Support BLE 4.2 Camera: 1MP camera, CMOS Memory slot:1 Micro SD slot RS485 port: Support Relays out: 2 Bell in: 1 Microphone: -26dB Speaker: Dual speakers, 4Ω / 3W Ethernet ports: 1xRJ45, 10/100Mbps adaptive 802.3af Power-over-Ethernet 12V DC connector (if not using PoE) Tamper resistant: Support Installation: Wall-mounted & Desktop Dimension: 251x182.5x29.75mm Working Humidity: 10~90 Working Temperature: -10°C ~ +45°C Storage Temperature: -20°C ~ +70°C Touch Screen Display Display Mode: Normally black, Transmissive LCD Size: 10inch (Diagonal) Aspect Ratio: 16:10 Resolution: 1280x800 Contrast ratio: 900:1 Luminance: 350 cd/m² Viewing Angle: 80° Left, 80° Right, 80° Upper, 80° Lower Touch Screen: Projected capacitive Audio SIP v1 (RFC2543), SIP v2 (RFC3261) Narrowband audio codec: G.711a, G.711μ, G.729 Broadband audio codec: G.722 DTMF: In-band, out-of-band DTMF (RFC2833), SIP Info Echo Cancellation Voice Activation Detection Comfort Noise Generator Automatic Gain Control Video Streaming formats: H.263 & H.264 Networking Protocols support: IPv4, IPv6, HTTP, HTTPS, FTP, TFTP, SNMP, DNS, SNTP, RTSP, SRTP, RTP, TCP, UDP, TLS, ICMP, DHCP, ARP Deployment & Maintenance Auto-Provisioning Web management portal Web-based packet dump Configuration backup / restore Firmware upgrade System logs (include door access logs)

Advertising ALLinOne PC with Rockchip RK3566 CPU and Android 11. 4GB Ram / 16GB memory. Expandable via USB and SD cards. 1920x1080 FullHD resolution, PoE (Power over Ethernet). The 3566 is a new processor from Rockchip and is ideally suited as a display screen. The front-panel touch-sensitive power button can be disabled by software. Please note! The screens will be changed in the next batch 12/2022 and get at the request of several customers the color black. They also come with 4GB Ram. Model NO. ALLTAB-14RK3566A11PoE         Product Type 14" POE   Description System CPU/GPU Rockchip RK3566 quad core processor, CPU – Quad-core Arm Cortex-A55, GPU – Mali-G52EE GPU RAM 2GB/ (4GB ab Batch 12/2022) ROM 16GB System Android 11 Display screen 14 Zoll IPS Panel resolution 1920x1080 Wide viewing Contrast 1000:1 Brightness 350Nits Network WiFi 802.11a/b/g/n 2,4/5GHz Ethernet POE Bluetooth YES 3G Support external 3G USB dongle Jack SD Support SD card ( Max 32G ) Mini USB Mini USB USB Host x 3 USB Host 3.0/2.0 RJ-45 built in DC DC input Headset 3.5mm stereo headphone/micro output Multimedia Video Video decode – H.264/H.265/VP9 Video encode – 1080p60 H.264/H.265 Audio MP3/WMA/AAC etc. Picture jpeg, jpg other functions Wireless mouse Support Wireless keyboard Support Speak 2Wx2 Camera 2 million pixel camera OSD Language Multi language OSD operation attachment Adapter 12V/2A Desktop Bracket Standard   Vesa 75x75mm   Limitations: These tablets cannot be compared with tablets from major brands. The Android system is based on AOSP. Some applications and functions are therefore limited and non-functional.

Discover the ALLNET PrimeOne Android 13 Tablet – your gateway to a smart future! Equipped with Google certification, this powerful tablet not only offers a smooth Android experience, but also the assurance that you have access to the latest and greatest apps in the Google Play Store. Our tablet is specifically designed for the end user who wants to get the most out of home automation and monitoring software. With MDM (Mobile Device Management) support, you retain full control over your tablet and can easily integrate it into your existing system. Thanks to the innovative PoE (Power over Ethernet) support, the ALLNET PrimeOne Tablet makes installation easier than ever before. With just one cable for data transmission and power supply, you can place your tablet anywhere without having to worry about power sockets. The conscious decision not to install a battery contributes to even more safety. No more worries about battery failures or replacements - the ALLNET PrimeOne tablet is always ready to support your home automation and monitoring software. Google certification ensures not only security, but also a wide range of applications from entertainment to productivity. The ALLNET PrimeOne tablet is designed to simplify your everyday life while delivering the highest performance. With the integrated WLAN functionality, you are always connected. No matter whether you place your tablet in the living room or in the garden - you always have access to your smart home devices and monitoring systems. The built-in TeamViewer support allows you to access your tablet from anywhere in the world. This is particularly useful when you are travelling and still want to maintain full control of your home automation and monitoring software. Whether you need to control your lighting, temperature or security cameras - the ALLNET PrimeOne tablet makes it easy and convenient. Get the ALLNET PrimeOne Android 13 tablet today and experience the future of home automation in your own home. Don't miss the chance to make your home smarter and safer – with the ALLNET PrimeOne tablet you are well equipped! Model NO. PrimeOne150 Product Type 15" POE   Description System CPU/GPU Rockchip RK3568 quad core processor, CPU – Quad-core Arm Cortex-A55, GPU – Mali-G52 2EE MC2 RAM 8GB ROM 64GB System Android 13 Display screen 15 inch IPS panel resolution 1920x1080 wide viewing Contrast 1000:1 Brightness 500nits Network WiFi 802.11a/b/g/n 2.4/5GHz Ethernet POE 30.4 at Bluetooth YES 3G Support external 3G USB dongle Jack SD Support SD card ( Max 32G ) Mini USB Mini USB USB Host x 3 USB Host 3.0/2.0 RJ-45 built in DC DC input Headset 3.5mm stereo headphone/micro output Multimedia Video Video decode – H.264/4K H.265/VP9 Video encode – 1080p60 Hz.264/H.265 Audio MP3/WMA/AAC etc. Picture jpeg, jpg other functions Wireless mouse Support Wireless keyboard Support Speak 2Wx2 Camera 2 million pixel camera OSD Language Multi language OSD operation attachment Adapter 12V/2A Power Supply included Desktop Bracket Standard   Vesa 75x75mm        

ALLNET Meeting Room RGB LED Tablet 10 inch RK3568 Android 11 and NFC, colour black                                                                       Includes power supply unit and integrated snap-in wall bracket with theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, such as multi-party residential complexes. Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera is not addressed AIDA time     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer We are happy to provide the API/SDK for NFC/RFID and LED on request. For further information, please refer to the NFC data sheet. System CPU RK3568,Quad-core cortex A55,1.6G RAM 4GB Internal memory  16GB Operation system Android 11 Display Touch screen 10-Point capacitive touch Panel 10.1"LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:10 Network WiFi 2.4/5GHz 802.11a/b/g/n Ethernet 100M/1000M ethernet Buletooth Bluetooth 5.0 Interface Card slot SD card USB  USB Host Micro USB  Micro USB OTG USB  USB for serial RJ45 with POE RJ45  POE IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo jpeg, png, etc. Other VESA 75x75mm NFC NFC with 13.56MHz Camera 2.0M/P,Front camera Microphone Microphone Speaker 2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter Adapter,12V/1.5A User manual yes     Unit (Without packaging) Giftbox (With Packaging) Carton 5pcs/CTN L  W  H  L  W  H  L  W  H  259.36mm 178.36mm 28mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG Net(kg) 2.3KG  

Adapter cable with jack plug and 2 open ends Length approx. 20cm Hollow plug 5.5*2.1mm