ALLNET Powerline 1200Mbit Bundle 2pcs Bridge RJ45 HomePlugV2 "SmartLink" Passtrough ALL1681205v2

Highlights:   • Up to 1200Mbps powerline data transmission rate • Supports MIMO • Compatible with other HomePlug AV technologies • Secure communication and protect your data by clicking one button • 1 gigabit ethernet ports • Internal PoE IEEE802.3at Injector support max. 30W for example IP-Cameras / ALL-SG82xxPD Switches etc.   Introduction ALL1681203 Smart Link HomePlug AV2 1200Mbps Ethernet Adapter embarks on a concept of No New Wires data communications, and it transforms your in-house powerline into a networking infrastructure. It provides SmartLink Plus coupling to the Line-Neutral pair and the Line-Ground pair of the AC mains. It successfully reduces "dead spots", increases throughput and network coverage within a home. Surf the Internet and share data at the speed up to 1Gbps (PHY rates) through powerline, And Built-in PoE Injector can provide 55V/48V classification power via CAT5E / CAT6 ALL1681203 Smart Link HomePlugAV2 engine is Qualcomm Atheros QCA7500 chip set , It features faster processing power, Fast Ethernet host interfaces and an enhanced analog front end. The solution is compliance with IEEE1901 , Homeplug AV and Homeplug AV2, hence allowing hassle free compatibility with existing Homeplug AV2 devices and other suppliers of IEEE1901 PLC (Powerline Line Communication) devices and IEEE 802.3at /af compliant Midspan or Endpoint (Option) PSE. Technical Details:   Element Spezifikation Chipset: Qualcomm QCA7500 + QCA8334 Standards: • IEEE 1901, IEEE 1905.1 and HomePlug AV                Compliant • HomePlug AV2 Compliant • AV2 30MHz and 67MHz MIMO profi les • AV2 30MHz and 67MHz SISO profi les • Power Save mode • Co- existence with HomePlug 1.0/Turbo Nodes • Compliant to ErP 2013 directive • IEEE 802.3 10/100/1000 Ethernet(1200Mbps) Brutto data rate Powerline: up to 1200Mbps Frequency band: 2MHz to 67,5 MHz Access-Methode Powerline: Priority-based CSMA/CA channel access Quality of Service: Priority-based CSMA/CA channel access schemes maximize effi ciency and throughput Integrated Quality of Service (QoS) Enhancements Supports IGMP managed multicast session Modulation:   OFDM 4096/1024/256/64/16/8 QAM, QPSK, BPSK, ROBO, und Mini-ROBO Modulation Schema Powerline interface: Type F earthing contact connector (DE), Type C/E (FR) Network interface: 1x RJ45 10/100/1000Mbit IGMP: Support IGMP managed multicast sessions IGMP snooping with multicast to multiple unicast support IGMP/MLD Adressfiltering Nodes/Clients: max. 15 devices Security support: 128bit AES Link encryption with key management (aktivated via Simple Connect button) LED indicators: Power LED PowerLine Link/ACT Status LED 2x Ethernet Link/ACT Status LED  Power supply: Type F earthing contact connector (DE), Type C/E (FR) Switch mode 110VAC to 240VAC Power over Ethernet: Data PIN´s: 1,2 & 3,6 Power: 4,5 & 7,8 Max. 30 PoE IEEE802.3at 48V Operating systems: all TCP/IP operating systems Operating systems for configurationsoftware:   Windows® XP32bit, Windows® Vista32/64bit, Windows®7 32/64bit   Housing: synthetic housing Environment: Temperature operating: 0 ~ 40 °C Humidity operating: 30% ~ 80% (non condensing) Temperature storage: -25 ~ 70 °C Humidity storage: 30% ~ 95% (non condensing) Marks: CE, RoHS Dimensions: 115 x 65 x 30mm  Weight: 300g (only device)   Package content: 1x ALLNET ALL1681203 1x RJ45 patch cable 1m 1x CD-ROM with manual & software

Highlights: 2in1 1200Mbit Powerline & Wireless AC Accesspoint New HomePlug AV2 standard Up to 1200 Mbps powerline data transfer rate via powerline Compatible with other HomePlug AV technologies MIMO support 2x Gigabit Ethernet ports Integrated wireless AC/abgn 2x2 wireless AC access point Integrated filtered safety socket outlet with 16A, also known as "Passtrough" Easy installation The following is supported from firmware version 1.0.76: 1.EAP authentication (802.1x) : PEAP MSCHAPV2 ; 2. roaming capable IEEE802.11r firmware can be obtained by clicking on this link support@allnet.de The perfect symbiosis of network via power cable + network via radio "Wireless AC access point" The ALL1681211v2 adapter is the first ALLNET powerline adapter according to HomePlug AV2 standard with Smartlink 1200 Mbps and MIMO with additional integrated wireless AC access point on the market. The ALLNET ALL1681211v2 uses the latest Qualcomm Atheros QCA7500 / QCA8334 chipset. It has two Gigabit Ethernet RJ45 interfaces and is compatible with the IEEE1901/Homeplug AV and GreenPHY powerline standards. This makes it easy to use with existing powerline end devices from other manufacturers. High data rates and Quality of Service (QoS) enable the use of HD multimedia applications and help you to realise high-speed digital multimedia home networks throughout the house, including IPTV services, simultaneous HD video and audio distribution, Voice Over IP calls, online gaming, high-speed Internet. The ALL1681211v2 offers simple plug & play push-button networking without the need for software configuration. The Network Management Key (NMK) with its 128-bit AES hardware encryption ensures secure, authenticated access to the logical network and protects the network from hackers. The integrated wireless IEEE802.11ac dual-band access point performs in 2.4GHz (max. 300Mbps) and 5GHz (max. 867Mbps). In order to fulfil the requirements for modern Green IT products, the ALL1681211v2 complies with the European Code of Conduct (CoC) for improving energy efficiency and the Energy using Products (EuP) Directive of the European Union. The new HomePlug AV2 standard enables highly efficient data transmission on the power cable with technologies such as Efficient Notching & High Efficiency PHY Protocoll Data Unit (PPDU) Structure. The new ALL1681211v2 now also offers an integrated protective contact socket that is looped through in a filtered manner, i.e. the end devices that are connected behind this integrated filtered socket do not interfere with the powerline transmission signal. This has 2 advantages: You do not occupy dedicated sockets in the wall End devices behind them do not interfere with the stability of the powerline Technical details: Product ALL1681211v2 PLC 1200M & 1200Mbps 802.11ac Dual Band Wireless Gigabit Hardware Specifications Interface LAN port: 2 x 10/100/1000 Mbps auto MDI/MDI-X RJ45 port Power port: 1X POWER (AC) interface Antenna Gain: 2x 3dBi 5.8G built-in antenna 2x 3dBi 2.4G built-in antenna Button 1 x Factory Default / WPS button 1 x PLC button Pairing LED Indicators WiFi PLC Material Plastic Transfer frequency band 2-68Mhz Dimensions (W x D x H) 70x43x126mm(without plug) Weight 0.35KG Power Requirement AC85-260V Power Consumption Maximum W/A:10.3/0.15 Typical W/A:8.0/0.12 Stand-by W/A:2.1/0.11 Wireless Interface Specifications Standard IEEE 802.11ac 5GHz IEEE 802.11a/n 5GHz IEEE 802.11b/g/n 2.4GHz Frequency Band Simultaneous 2.4GHz and 5GHz Modulation Type 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) 802.11b: DSSS (DBPSK / DQPSK / CCK) Data Rates 2.4GHz up to 300Mbps 5GHz up to 867Mbps HomePlug: PHY rate:1200Mbps TCP/IP rate: 550Mbps Channel 2.4GHz FCC (America): 2.412~2.462GHz (11 Channels) ETSI (Europe): 2.412~2.472GHz (13 Channels) 5GHz 5.180-5.240GHz, 5.745-5.825GHz (up to 9 channels) *The actual channels in application will vary depending on the regulation in different regions and countries. Channel Width 802.11ac: 20/40/80MHz 802.11n: 20/40MHz Max. RF Power / EIRP 2.4GHz: < 20dBm 5GHz: < 20dBm Receive Sensitivity 2.4GHz 11b (11Mbps): -79dBm 11g (54Mbps): -68dBm 11n (20M) mode: -67dBm 11n (40M) mode: -64dBm 5GHz 11a: -74dBm 11n (20M) mode: -70dBm 11n (40M) mode: -67dBm 11ac (20M) mode: -67dBm 11ac (40M) mode: -61dBm 11ac (80M) mode: -57dBm SSID 2.4GHz: 1 Root SSID and 4 Guest SSID 5GHz: 1 Root SSID and 4 Guest SSID Wireless Management Features Encryption Security WEP WPA/WPA2 personal mixed mode Wireless Security Wireless ACL MAC address filtering Supports WPS (Wi-Fi Protected Setup ) Max. Supported Clients 2.4GHz wireless: 32 5GHz wireless: 32 Standards Conformance IEEE Standards IEEE 802.11n (2T2R, up to 300Mbps) IEEE 802.11g IEEE 802.11b IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX Regulatory CE, RoHS, WEEE Environment Temperature Operating: 0 ~ 40 degrees C Storage: -40 ~ 70 degrees C Humidity Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 95% (non-condensing)

Phase coupler for power line networks for installation in the fuse box (top-hat rail). Highlights:   3-phase version Frequency range 1-70 MHz AC 250 / 440 V, 4 x 22nFX2, 3-phase CE approved installation width: 34mm Installation depth: 70mm max.   Interconnects all phases/Phase coupler of the home power system and makes the powerline signal available on all outlets in a circuit. For coupling between sub-distribution boards or across RCDs and electricity meters, only ALL16881PC (Art. 112411) may be used! Attention. This article must only be installed by authorised and qualified persons. Technical Details:     Frequency Range: 0-70Mhz Nominal Voltage: AC 250/440V 4x22nFX2, 3 phase Temperature Range: -25°C - 100°C Installation width: 34mm Installation depth: 70mm max. Mounting: DIN rail mounting Mark: CE

Powerline Phase Coupler for Power Line networks for installation in the fuse box (DIN-Rail)   Highlights:   ALL16881PC AC 250 / 440 V 50/60Hz Multiple Phases phase coupler for multiple Phases "Coupling to other PLC networks" DIN-Rail installation Frequency range 1-70 MHz Suitable for PLC Signal coupling over circuit breaker and multiple electric meters CE-proved   Combines all phases of the home power network with each other and makes the Powerline signal to electrical power sockets in a circuit available. About the fourth LX-phase cross-connections can be implemented to other circuits when electricity meter, earth leakage (GFCI), circuit breakers and similar obstacles for power line communications must be overcome.   Circuit diagram for electrician: See manual for more details. 2 application examples are listed in the manual. For further application examples please contact our support support@allnet.de.   Technical Details:     Frequency Range: 0-70Mhz Nominal Voltage: AC 250/440V 4x22nFX2, 3 phase Temperature Range: -25°C - 100°C Installation width: 34mm Installation depth: 70mm max. Mounting: DIN rail mounting Mark: CE

With the help of this Eichhoff powerline filter, you can "lock" Powerline subsegments to larger installations such as hotels or to network similar with powerline technology. Because of this reject-filter, the segments do not interfere with each other.The reject-filter is designed for a capacity of 16A power for DIN rail mounting.The frequency range is between 2.0 to 40 Mhz. Temperature range: -25°C bis +100 °C   ** Attention: This product may only be installed by authorized specialist workshops! **

With the help of this Eichhoff powerline filter, you can "lock" Powerline subsegments to larger installations such as hotels or to network similar with powerline technology. Because of this reject-filter, the segments do not interfere with each other.The reject-filter is designed for a capacity of 25A power for DIN rail mounting.The frequency range is between 2.0 to 40 Mhz. Temperature range: -25°C bis +100 °C   ** Attention: This product may only be installed by authorized specialist workshops! **

Eichhoff Powerline filter with 16A power in a protective contact through housing, frequency range 2.0-68 MHz,