Highlights: 60 Watt PoE IP67 Outdoor Injector according to IEEE802.3bt Standard IP67 weatherproof & IK10 shockproof for robust outdoor installations 1x 10/100/1000M TX PoE output according to IEEE802.3af/at/bt 60W 1x AC 100~240V input voltage on 2PIN terminal (AC connection cable must be installed by customer, thus flexible in installation) Extended operating temperature: -20°C to +60°C This product is a waterproof Gigabit Power over Ethernet (PoE) device for powering most common IP end devices. The injector is fully compliant with the IEEE 802.3af/at/bt standard. The device also complies with the IP67 protection class, which means it is weatherproof and can be used outdoors without any problems. Thanks to the IK10 standard, the injector is vibration-resistant, which ensures reliable and safe use, even in industrial environments. It transmits the required electrical energy and implements the data exchange via an RJ45 cable with a maximum transmission distance of 100 metres. The injector automatically detects which PoE standard is present at the end device on the output side and regulates the voltage automatically. The injector can supply a PoE end device at the output with a maximum power of 60W according to the IEEE802.3BT standard.     Technical Details:   Technical Details: Model: ALL-PI2013OBT60 - 60W waterproof PoE injector AC to BT 60W IEEE Standard: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE802.3af for POE IEEE802.3at for POE+ IEEE802.3bt Network Media (Cable): 10BASE-T: UTP category 3,4,5 cable (≤100m)  100BASE-TX: UTP category 5 cable (≤100m)  1000BASE-T: UTP category 5e cable (≤100m) Network Connector:   1xRJ-45 10/100/1000BaseT(X) Data 1xRJ-45 10/100/1000BaseT(X) PSE with POE Output power IEEE802.3bt 60W Input current: 1,5A Max Power input: AC 100-240V 50/60Hz 2 PIN Terminal PoE Power output: 60W Max. IEEE802.3bt POE Pin Assignment RJ45: 1/2(-), 3/6(+) and 4/5(+),7/8(-) Output Voltage: DC 55V±5% Output ripple voltage: ≤200mV,Test conditions: rated input voltage, full load output, Tested with 20MHz bandwidth oscilloscope, Parallel connected a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to the output Output current: 1.1A Max. LED Indicator: PWR(Green) , PoE(Bt:Green,UPoE:orange) Dimmension: 150 x 73 x 44mm Operating Temperature: -20°C ~ 60°C Storage Temperature: -40°C ~ 80°C Surge Protection: Difference Mode:±4KV, Common mode:±6KV MTBF: <50000 hours Electrostatic standard: Contact 6KV, air 8KV Waterproof grade: IP67 Anti-hazard classification: IK10

ALLNET Switch unmanaged outdoor 3 Port Gigabit 100W / 3x PoE+ / 1x SFP /  Fanless / IP67 / "ALL-SGO8103P"   Highlights: 3-Gigabit ports with PoE AF/AT support up to 30Watt per port, 1x SFP Ports for FO-Gbics e.g. ALL4750-INDU see accessories PoE Ports 1-3 max. PoE IEEE802.3at 30W Max. PoE Budget = 100 Watt Fanless metal housing with optimized heat dissipation Extended temperature range from -40° ~ +75° IP67 Protection class Fanless design The ALL-SGO8103P is a 4-port PoE switch housed within a waterproof IP67 metal casing. This switch offers 3 Gigabit PoE ports compliant with IEEE802.3af/at, delivering a maximum of 30W per port. For the uplink port, the Gigabit SFP slot is recommended, which supports both fiber and copper connections via optional mini-GBICs. It adheres to the IEEE802.3at standard and is additionally compatible with the usage of all IEEE802.3af standard devices, such as wireless APs, network cameras, VoIP phones, base stations, and other high-performance Ethernet terminals. The ALL-SGO8103P is designed for outdoor use. It operates with an input voltage ranging from 100-240Vac and functions efficiently within a temperature range of -40°C to +65°C. This outdoor switch comes equipped with various features including 6kV surge protection and other functionalities to ensure reliable operation in outdoor environments. Optionally, the switch can be easily mounted on a mast using the ALL-SGO83-Pole-Kit. Use Cases: Here are some use cases for the ALL-SGO8103P that cater to our distribution channels selling to resellers in the IT sector, lighting industry, telecommunications sector, electricians, video surveillance sector, security integrators, Industry 4.0 integrators, cybersecurity and IoT professionals, as well as smarthome installers: IT Sector: In IT networks, the ALL-SGO8103P can serve as an outdoor PoE switch to extend networks to remote locations or outdoor areas. For instance, it could be used to power wireless APs in remote areas. Lighting Industry: In outdoor lighting, the switch can be used to control and power PoE-enabled lighting systems, ensuring energy efficiency and flexibility. Telecommunications Sector: For telecommunications, the switch can be used to provide network connectivity to telecommunications masts and equipment outdoors. Electricians: Electricians can utilize the ALL-SGO8103P to install and power PoE-enabled devices such as IP cameras, access control systems, or VoIP phones outdoors. Video Surveillance Sector: In video surveillance, the switch can facilitate the operation and management of PoE-enabled cameras and surveillance devices at strategic outdoor locations. Security Integrators: Security providers can use the switch to install wireless security systems and devices in areas without direct power access. Industry 4.0 Integrators: In Industry 4.0 applications, the switch can aid in connecting and powering networked devices and sensors in outdoor environments. Cybersecurity and IoT: When integrating cybersecurity solutions and IoT devices, the switch can be employed to securely network and power critical devices in outdoor scenarios. Smarthome Installers: Smarthome installers can utilize the switch to operate PoE-enabled devices in the outdoor areas of a residence, such as surveillance cameras or smart lighting systems. These use cases underscore the versatility of the ALL-SGO8103P switch and how it can be deployed across various industries and scenarios to provide robust and reliable outdoor network connections. Technical Drawings: Technical Details: Element Specification Standards IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE8.2.3ab 1000Base-T Gigabit Ethernet Support PD with IEEE802.3af/IEEE802.3at standard PoE Power Output Power Output Pins: 3/6(+), 1/2(-) Ethernet Pins: 4/5(+),7/8(-) Data rate: 10/100/1000Mbps Output voltage: 55V Output current: 550mA Input AC voltage: 100-240VAC Input AC current: 2A@ 100-240VAC AC Hz: 50-60Hz Dimension & Weight Dimension: 176mm X 269mm X 65mm Weight : 1.8kg Environmental & Conditions Operating Temperature: -40°C ~ +65°C Operating Height: -304.8meters to 3048meters Operating Humidiy: Maximum 90%, Non-condensing AC Input Surge Protection   6KV PoE power output surge protection Protected pins: 1, 2, 3, 4, 5, 6, 7, 8 Line - Earth(10/700us): 6KV PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV EMI FCC CFR47 Part 15, EN55024, EN55032 EMS IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks CE IP67 WEEE Compliance Protection Level: IP67 IEC60529, NEMA 250

LED Outdoor Spot 20W, Light colour: infrared, 850nm, Housing: light grey Fastening: Stainless steel mounting bracket Connection: RJ-45 for PoE IEEE 802.af / IEEE 802.3at PoE injector or PoE switch is required (not included in the scope of delivery) Protection class: IP65, Operating temperature: -20°C to +40°C Weight: 3.5kg Beam angle: 120° Range up to 30 metres Size: 240*220*75mm