ALLNET Touch Display Tablet 14 inch Installation set

flush mount / mounting frame for 14" inch tablet (142997)  only the frame, without tablet! Please keep in mind that the speakers and microphones are located on the back of the tablet and thus the quality and volume of the sound options will be limited once the tablet is installed in a wall. The tablet is screwed to the frame via the vesa mount and then mounted with it in a drywall or wooden wall. Walls are of course also possible, but is only conditionally recommended due to possible heat accumulation. Attention, the individual mounting frames are not compatible with our aluminum panels. Panels must be built for this yourself and are also not available individually from us.

Vesa wall mount for sizes 7.5x7.5 and 10x10.  Snap-In with locking screw consists of two parts. The part for wall mounting with guide rail and the Vesa mount for tablets, PC's, monitors. Screws for the ALLNET Android tablets distance to the wall 12mm. Package content includes the bracket and 4xM3 screws. These fit only for the 10 inch tablet. Screw sizes in mm for the ALLNET tablets: 21" m4x8 not included 14/15" m4x5 not included 10" m3x5 included in delivery

Installation set mounting frame + bezel for 14" inch tablet Color silver The bezel is magnetically fixed on the mounting frame. The magnets must be mounted on the bezel. Please keep in mind that the speakers of the tablet are located on the back of the tablet and thus the quality and volume of the sound options will be limited once the tablet is installed in a wall. The tablet is screwed to the frame via the vesa mount and then mounted with it in a drywall or wooden wall. Walls are of course also possible, but are only recommended to a limited extent due to possible heat accumulation.  

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

ALLNET removable screw set M3 and M4 screw set for mounting on Vesa bracket   Diameter/thread length: 4xM3 3.5mm 4xM3 5.5mm 4xM4 3.5mm 4xM4 5.5mm Washers are recommended for some tablets, n.i. scope of delivery

Height-adjustable stand with cable feed-through and rotatable Vesa plate (90-180degrees), floor mounting possible 75mm x 75mm 100mm x 100mm For monitors from 8 to 24 inches. COLOR: black max. height 1200mm min. height 690mm Beschreibung Universal-Tablet-Ständer   Innenkarton 1pc/ctn Tragfähigkeit 20lbs 81x42x12cm,9.6kg Material SPCC Äußerer Karton 2pc/ctn Höhe 70-120cm 81x43x26cm,20.9kg Standard VESA 75 x75, 100 x100mm Brown box Merkmale Kippbereich: 180 Grad Schwenkbereich: 360 Grad Farbe Black/White     Verpackung Karton/braun

Height-adjustable stand with cable feed-through and rotatable Vesa plate (90-180degrees), floor mounting possible 75mm x 75mm 100mm x 100mm For monitors from 8 to 24 inches. COLOR: black max. height 1200mm min. height 690mm Beschreibung Universal-Tablet-Ständer   Innenkarton 1pc/ctn Tragfähigkeit 20lbs 81x42x12cm,9.6kg Material SPCC Äußerer Karton 2pc/ctn Höhe 70-120cm 81x43x26cm,20.9kg Standard VESA 75 x75, 100 x100mm Brown box Merkmale Kippbereich: 180 Grad Schwenkbereich: 360 Grad Farbe Black/White     Verpackung Karton/braun

Vesa auf Vesa Halterung. Mit dieser Halterung ist es möglich einen Mini-PC an einer belegten Vesa Halterung anzubauen. z.B. (div. Ilyama Monitore) 50mm x 50mm, 75mm x 75mm, 100mm x 100mm

Desktop stand, POS holder for tablet PC with Vesa mount Universal desktop holder for two sizes 75x75 and 100x100 Fits displays with Vesa mounting option. Can also be used as a wall mount. To prevent larger tablets from wobbling during active touch input, the edge of the device should be placed on the table. Without screws or mounting accessories for monitors. Screw set art. no.: 157678  Suitable for ALLNET displays: M3x4mm for 10 inch PoE displays M4x4mm for 14/15/21 inch displays