Fanvil TFE i56A, 10.1" i56A SIP Indoor Station / SIP / POE

Highlights 2.5 Gigabit PoE+ injector compliant with IEEE 802.3af/at Up to 30 W PoE output power for high-performance end devices 2.5GBASE-T (10/100/1000/2500 Mbit/s) for maximum network performance Plug & Play – no configuration required Automatic detection of PoE-enabled devices Internal power supply (100–240 VAC) – no external power supply required Silent operation thanks to fanless metal housing Integrated overcurrent, short-circuit and overvoltage protection Status LEDs for power and PoE link Ideal for Wi-Fi access points, IP cameras, VoIP telephones and other PoE devices The ALLNET ALL0489v4 is a high-performance 2.5 Gigabit PoE+ injector that delivers data and power via a single network cable. With an output power of up to 30 watts in accordance with IEEE 802.3at, the injector is ideal for modern PoE devices such as Wi-Fi 6/6E/7 access points, IP cameras, VoIP telephones or industrial network devices. Thanks to its support for 10/100/1000/2500 Mbit/s, the ALL0489v4 can be easily integrated into existing multi-gigabit networks without limiting the data transfer rate. Automatic PoE detection ensures that only compatible devices are powered and reliably protects non-PoE devices. The integrated wide-range power supply (100–240 VAC) enables easy installation without the need for an external power supply. The robust metal housing with fanless, passive cooling ensures silent and reliable continuous operation – whether in the office or in industrial and surveillance applications. With comprehensive protection mechanisms against overcurrent, short circuits, ESD and overvoltage, the ALL0489v4 ensures safe operation even in demanding network environments. Typical applications (use cases) Wi-Fi 6 / Wi-Fi 7 access points Powering modern access points via a single network cable – ideal where there is no mains socket. IP video surveillance Power supply for PoE IP cameras with a 2.5-gigabit data connection for high-resolution video transmission. VoIP telephones Simple installation of IP telephones without a separate power supply unit. Network extensions Retrofitting PoE functionality to existing switches that do not support PoE. Industry & Building Automation Reliable power supply for industrial network devices, sensors and control systems. Digital signage Power supply for PoE-enabled displays, information terminals or kiosk systems. Smart buildings Use in access control systems, door intercoms, IoT gateways and other PoE applications. Target groups System houses and network integrators Electricians IT departments Businesses CCTV installers Smart building integrators Industrial and automation companies Data centres and server rooms Technical Details Technical Specifications Product Type 2.5 Gigabit PoE+ Injector Network Interfaces 1 × RJ45 10/100/1000/2500Base-T (Data In) 1 × RJ45 10/100/1000/2500Base-T PoE+ (Power & Data Out) Data Rate 10 / 100 / 1000 / 2500 Mbps PoE Standards IEEE 802.3af (15.4 W), IEEE 802.3at (30 W) Maximum PoE Output 30 W Supported Standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3bz IEEE 802.3af IEEE 802.3at Auto Negotiation Supported PoE Detection Automatic PD Detection LED Indicators Power (Green), PoE Link (Green) Power Supply Internal switching power supply, 100–240 VAC, 47–63 Hz, 54 VDC / 40 W Cooling Fanless Passive Cooling Housing Metal Housing Earthing Earthing Screw (GND) Protection Overcurrent Protection Short-circuit Protection ESD Protection Surge Protection ESD Protection IEC 61000-4-2 Contact ±4 kV, Air ±8 kV EFT Protection IEC 61000-4-4 Power 2 kV, LAN 1 kV Surge Protection IEC61000-4-5 Line-to-Line & Line-to-GND Level 3 (2 kV) MTBF > 50,000 hours @ 45°C Operating Temperature 0°C to +45°C Storage Temperature -20°C to +70°C Operating Humidity 10%–90% RH (non-condensing) Storage Humidity 5%–90% RH (non-condensing) Dimensions (W × D × H) 130 × 62 × 36 mm Compliance CE, FCC, VCCI Class B, CE LVD

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

Highlights Built-in HD camera with infrared night vision, adopt H.264 codec HD voice speech quality with built-in 3W speaker and Acoustic Echo Canceller (AEC) IP65 waterproof and dustproof IK10 anti-collision with robust die-cast aluminum frame Anti-tamper- alarming as long as the cover is apart from the housing, and reporting to the control center at the same time -40°C to 70°C wide range temperature adaptability Built-in 2 short-in detect port and 2 short-out control port Support online management and upgrade Compatible with major platforms: Asterisk, Broadsoft, 3CX, Metaswitch, Elastix, Avaya etc.   i Series Industry Products The i-Series is Fanvil SIP intercom and door phone for industry. These professional phones are required to meet special demands and standards that only Intercom systems can satisfy: hands-free talking, extra high volume levels, function monitoring, wall mounting, and reliable protection against bad weather, vandalism and sabotage.   Technical Information Device Dimensions 195x120x34mm Video 2 MPixel Protocols SIP2.0 over UDP/TCP/TLS | RTP/RTCP/SRTPSTUN DHCP | IPv4 | IPv6 | LLDP | PPPoE | 802.1x | L2TP | OpenVPN | SNTP | FTP/TFTP | HTTP/HTTPS | TR-069 Network 10/100 Mbps Ethernet DC Power Input 12V / 1A or POE Installation Outdoor, On-Wall Protection Level IP65, IK10