Ermöglicht Multi-Gig-Glasfaser-Internetverbindungen mit bis zu 2,488 Gbps im Downstream und 1,244 Gbps im Upstream.* Unterstützt 2,5G- und 1G-Ethernet-UNI-Modi für flexiblen Internetzugang. Hot-Swap-Funktion für schnelle und einfache Installation und Anwendung.

Hightlights: Upgrade Any Ethernet Gateway to GPON — Instantly The ALL-BM510-GPON-GBIC transforms any SFP-based router, switch, or gateway into a full GPON ONT, enabling rapid fiber rollout without hardware replacement. Compact SFP ONT with High-Performance GPON A complete ITU-T G.984-compliant GPON ONT packed into a miniature SFP form factor—optimized for business and residential fiber deployments. Seamless Integration via HSGMII (2.5G/1G) Plug-and-play SFP with HSGMII interface for effortless compatibility with existing Ethernet infrastructures. Carrier-Grade QoS and Advanced L2 Features Full VLAN functionality, QoS mapping, traffic classification, and advanced bridging deliver premium service quality for demanding fiber applications. Ultra-Low Power Consumption Consumes less than 1.6W, ideal for high-density deployments. Wide Temperature Operation Reliable performance from –10°C to +85°C, designed for harsh environments and telecom cabinets. Secure and Fully Managed Integrated OMCI stack for remote provisioning, monitoring, firmware upgrades, and FCAPS management. High Optical Performance ProdSupports Class B+ optics with APD receiver and DFB transmitter for long-reach, stable GPON connectivity. To extend the GPON deployment in existing access network for business and residential subscribers, GPON ONT SFP ALL-BM510-GPON-GBIC provides the standard SFP package with SGMII interface, which can easily replace the Ethernet SFP module existing in Ethernet gateway, switch, router or backhaul equipment etc. Equipped with ITU-T G.984 compliant GPON interface, ALL-BM510-GPON-GBIC incorporates interoperability, key customers’ specific requirements and cost-efficiency. By integrating GPON MAC and standard compliant OMCI stack, G- 97S provides all GPON functionality and full range FCAPS management features including supervision, monitoring and maintenance Service Data The ALL-BM510-GPON-GBIC ONT is delivered with one SFP (Small Form-factor Pluggable) based HSGMII interface, supporting: Built-in layer-2 switching Advanced data features such as VLAN tag manipulation, classification, and filtering Specification Dimensions 72 mm x 14 mm x 11.8 mm (L x W x D) Power Supply Full Speed Power Consumption at room temperature: < 1.6W Working Environment case operating temperature: -10~+85 °C Humidity: 5 ~ 95% relative humidity, non- condensed Safety & EMI CE compliant FCC/UL compliant Installation SFP interface GPON Interface Compliant with ITU-T G.984 GPON standards SFF type laser, SC/APC connector 1.244G bps Burst Mode Upstream Transmitter 2.488 Gbps Downstream Receiver Compliant with ITU-T G.984.2 Amd1, Class B+ APD receiver and DFB transmitter 0.5~+5dBm launch power, -27 dBm sensitivity, and -8dBm overload Wavelengths: US 1310nm, DS 1490nm Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I, ONT support Class C or Class C+ optics as an option GPON QoS Multiple T-CONTs per device Multiple GEM Ports per device Flexible mapping between GEM Ports and T- CONT Activation with automatic discovered SN and password in conformance with ITU-T G.984.3 AES-128 Decryption with key generation and switching FEC (Forward Error Correction) DBA reporting by piggyback reports in the DBRu (mode 0) 802.1p mapper service profile on U/S Mapping of GEM Ports into a T-CONT with priority queues based scheduling Support Multicast GEM port and incident broadcast GEM port. Ethernet Interface SFP based HSGMII interface, 2.5GE/1GE compatible Hardware priority queues on the downstream direction in support of CoS 802.1D bridging Virtual switch based on 802.1q VLAN VLAN tagging/detagging VLAN stacking (Q-in-Q) and VLAN Translation IP ToS/DSCP to 802.1p mapping Class of Service based on VLAN-ID, 802.1p bit, ToS/DSCP Marking/remarking of 802.1p Broadcast/Multicast rate limiting OAM Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G.984.4 and G.988 Alarming and AVC report, performance monitoring Remotely software image download over OMCI, as well as activation and rebooting Hold two software sets with software image integrity checking and automatic rollback Pin Description: PINNO. Name Active 1 VEET   2 TX Fault High 3 TX Disable High 4 SDA   5 SCL   6 MOD_ABS   7 Dying Gasp Up to host pin definition 8 RX_LOS High 9 VEER   10 VEET   11 VEER   12 RD-   13 RD+   14 VEER   15 VCCR   16 VCCT   17 VEET   18 TD+   19 TD-   20 VEET  

SM311LS Omada 1000Base-LX SMF Mini GBIC Module Up to 20 km transmission distance in 9/125 µm SMF (Single-Mode Fiber) Supports Digital Diagnostic Monitoring (DDM) Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA) Hot-Pluggable with maximum flexibility Commercial Product Operating Temperature Range: 0-70°C

SM311LM Omada 1000-Base-SX MMF Mini GBIC Module Multi-Modus-MiniGBIC-Modul Unterstützt digitale Diagnoseüberwachung (DDM) Kompatibel mit Small Form Pluggable Multi-Source Agreement (SFP-MSA) Hot-Plug-fähig mit maximaler Flexibilität Betriebstemperaturbereich für kommerzielle Produkte: 0–70 °C

SM331T Omada 1000BASE-T RJ45 SFP Module Support 10/100/1000Base-T Operation in Host Systems Support TX Disable function For 100m* Reach Over UTP Cat 5e or above Cable Hot-Pluggable SFP Footprint Features Commercial Product Operating Temperature Range: 0-70°C Compliant with IEEE Std 802.3-2002 Fully Metallic Enclosure for Low EMI Low Power Dissipation (0.5 W Typical, 0.8 W Max)

* Auftragsbezogen, nicht Stornierbar *, Entdecken Sie den RM-OM-T2, Ihre ausgezeichnete Lösung für die nahtlose Integration Ihres appliance in ein 19"-Rack. Dieses Rack ist speziell für die aufgeführten Modelle maßgeschneidert, um bei jeder Anwendung eine perfekte und sichere Passform zu gewährleisten. Dank praktischer Frontanschlüsse war der Zugriff auf Ihre Konfiguration noch nie so einfach. Sorgen Sie sich um einen versehentlichen Stromausfall? Keine Sorge! Das Netzteil ist fest am Rack befestigt, was für Sicherheit und ununterbrochene Funktionalität sorgt. Der Zusammenbau Ihrer Konfiguration ist ein Kinderspiel und dauert weniger als 3 Minuten von Anfang bis Ende. Schieben Sie einfach Ihr Gerät in das Kit, sichern Sie es mit den Halterungen, schließen Sie die mitgelieferten Kabel an die Keystone-Buchsen an und befestigen Sie das Netzteil am Rack - so einfach ist das! Erleben Sie eine nahtlose Integration und mühelosen Zusammenbau mit dem RM-OM-T2 - Ihrer bevorzugten Lösung für professionelles Rack-Mounting!