ALLNET Meeting Room LED Tablet 13 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)                                                                                            Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Through the NFC can also be implemented very well time recording terminals or info terminals with ID, such as multi-party apartment complexes.    Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera is not addressed AIDA time     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer We will gladly provide the API/SDK for NFC/RFID and LED on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface, for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU  RK3288,Quad-core cortex A17,1.6G RAM  2GB Internal memory  16GB Operation system Android 8.1/10    Display Touch screen 10-Point capacitive touch Panel  13" LCD panel Resolution 1920x1080 Active area 293(H)x164mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:9 Network WiFi  2.4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56M frequency)/RFID NXP Desfire Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/2.5A User manual yes          

ALLNET Meeting Room LED Tablet 15 inch RK3288 Android 10 and RFID (NXP Mifare, Desfire)                                                                                      Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Through the NFC can also be implemented very well time recording terminals or info terminals with ID, such as multi-party apartment complexes.  Currently tested Android time terminal software:  PDS Zeit works, but config file must be imported manually, camera is not addressed AIDA-Zeit     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer We will gladly provide the API/SDK for NFC/RFID and LED on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface, for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU  RK3288,Quad-core cortex A17,1.6G RAM  2GB Internal memory  16GB Operation system Android 8.1/10    Display Touch screen 10-Point capacitive touch Panel  15" LCD panel Resolution 1920x1080 Active area 344(H)x190mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:9 Network WiFi  2,4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56M frequency)/RFID NXP Desfire Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed color Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/2.5A User manual yes

ALLNET PoE Tablet 21 inch with RK3399 Android 11, 4GB/16GB Pro-Series Pro-Series                                                                                        This tablet is suitable for all applications where you need high performance. Be it media streaming or video surveillance, with 4GB Ram and the RK3399 you are well advised. The WLAN with 5GHz ensures the best transmission speed even without a cable connection. The tablet has a Touch to Wake function and the display can be woken up from sleep. The display can also be switched off with a double-click using a DoubleTap On/Off app from the Playstore. This function is helpful if the power button is no longer easily accessible due to wall mounting. Please note: New Android 11 version from batch 05/2022. System CPU RK3399 RAM 4GB Internal memory  16GB Operation ssystem Android 11     Touch 10-point capacitive touch Display Panel 21.5"LCD full HD panel Resolution 1920*1080 Active area 474.64(H)x 268.11 mm(V) Viewing angle 89/89/89/89/89(L/R/U/D) Display mode Nomally black ,IPS Contrast ratio 1000 Luminance 250cdm2 Aspect Ratio 16:9 Network WiFi 802.11 a/b/g/n/ac 2.4/5GHz Multimimo Ethernet 100M/1000M Ethernet, PoE 30.4Watt at Bluetooth Bluetooth 4.0 Interface Card slot SD,Support up to 64GB USB Device  Mini USB OTG USB Host USB 2.0 USB Hostx2 USB Host 2.0 USB Hostx2 Serial port,RS232 Power Jack  DC power input RJ45 Ethernet  HDMI HDMI output Earphone 3.5mm earphone  Media format Vvideo format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo jpeg Other Speaker 2*3W Touch key Power/volume+/Volume- VESA 100x100mm Micphone yes Language Multi-language Working temp 0--40degree Certificates  CE Accessories Adapter Adapter,12V/3A User manual yes       Product Measurement, mm             Unit (Without packaging)     Giftbox (With Packaging)     Carton 2pcs/CTN   L  W  H  L  W  H  L  W  H  504.5mm 302mm 31.8mm 580mm 125mm 375mm 595mm 270mm 393mm Net(kg)     Net(kg)     Net                 G.W    

ALLNET Meeting Room LED Tablet 15 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)                                                                                      Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Through the NFC can also be implemented very well time recording terminals or info terminals with ID, such as multi-party apartment complexes.  Currently tested Android time terminal software:  PDS Zeit funktioniert, Configfile muss aber manuell eingespielt werden, Kamera wir nicht angesprochen AIDA-Zeit     funktioniert laut Hersteller mit unseren Artikelnummern 174715/174716/174717/174888 u. 182897 We will gladly provide the API/SDK for NFC/RFID and LED on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface, for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet.

Allnet Display 32 inch, TV Style, Interactive Touch Kiosk Terminal, Android 12, RK3588, HDMI In, colour black without PoE Stand foot; optional and not included in the scope of delivery!!! High-performance RK3588 chipset Octa Core (4xA73+4xA55) 8GB working memory Wifi 6 Gigabit Wlan NFC (optional ext. USB NFC module for fixing on the side) Android 12 & Linux Incell touch surface HDMI input for external devices System CPU RK3588 Quad core cortex A55+Quad core cortex A76 RAM 8GB Internal memory 128GB Operation system Android 12 Display Panel Size 32" LCD Panel Type IPS Resolution 1920*1080, 3840x2160 Display Colours 16.7M Colors Colour Gamut sRGB 99% Display mode Normally black Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 1000:1 Luminance 250cdm2 Aspect Ratio 16:9 Response Time 14ms  Back-light Type Eled Touch Model Type Incell Touch Number of points 10-point Interface for touch HID-USB Network WiFi 802.11b/g/n/a/ac/ax   (WiFi 6) Ethernet 100M/1000M Bluetooth Bluetooth 5.0 Interface Power Jack DC power input MIC IN External microphone input Earphone Output 3.5mm earphone output Type-c Full Function ( Except for charging function ) SIM Slot no USB Standard  USB 2.0 Host USB USB 3.0 USB USB 3.0 HDMI IN Support HDMI 2.0 RJ45 Ethernet interface    Other Product Colours white/Black VESA 100mm*100mm Button Power/Vol+/Vol- Other Power Speaker 4O*5W*2 Microphone Built in dual Microphone , Support noise reduction and echo cancellation NFC no G-sensor Support  90 degrees Camera no Language Multi-language Certificates CE/FCC Power Type Adapter Input Voltage DC 12V/4A Power consumption =25W  Working Surrounding Accessories Storage Temperature -20?---60? Working Temperature 0?---50? 10~90%RH Adapter Adapter,12V/4A  Working Surrounding User manual yes    

Allnet Display 32 inch, TV Style, Interactive Touch Kiosk Terminal, Android 12, RK3588, HDMI In, colour white; without PoE Stand foot; optional and not included in the scope of delivery!!! High-performance RK3588 chipset Octa Core (4xA73+4xA55) 4GB working memory Wifi 6 Gigabit Wlan NFC (optional ext. USB NFC module for fixing on the side) Android 12 & Linux Incell touch surface HDMI input for external devices System CPU RK3588 Quad core cortex A55+Quad core cortex A76 RAM 4GB Internal memory 32GB Operation system Android 12 Display Panel Size 32" LCD Panel Type IPS Resolution 1920*1080, 3840x2160 Display Colours 16.7M Colors Colour Gamut sRGB 99% Display mode Normally black Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 1000:1 Luminance 250cdm2 Aspect Ratio 16:9 Response Time 14ms  Back-light Type Eled Touch Model Type Incell Touch Number of points 10-point Interface for touch HID-USB Network WiFi 802.11b/g/n/a/ac/ax   (WiFi 6) Ethernet 100M/1000M Bluetooth Bluetooth 5.0 Interface Power Jack DC power input MIC IN External microphone input Earphone Output 3.5mm earphone output Type-c Full Function ( Except for charging function ) SIM Slot Optional  4G/5G modules USB Standard  USB 2.0 Host USB USB 3.0 USB USB 3.0 HDMI IN Support HDMI 2.0 RJ45 Ethernet interface    Other Product Colours white/Black VESA 100mm*100mm Button Power/Vol+/Vol- Other Power Speaker 4O*5W*2 Microphone Built in dual Microphone , Support noise reduction and echo cancellation NFC no G-sensor Support  90 degrees Camera no Language Multi-language Certificates CE/FCC Power Type Adapter Input Voltage DC 12V/4A Power consumption =25W  Working Surrounding Accessories Storage Temperature -20?---60? Working Temperature 0?---50? 10~90%RH Adapter Adapter,12V/4A  Working Surrounding User manual yes    

ALLNET meeting room LED tablet 13 inch RK3399 Android 10 and RFID (NXP Mifare, Desfire) WITHOUT INTEGRATED CAMERA !!! Includes power supply and integrated snap-in wall mount with theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, e.g. multi-party residential complexes. Currently tested Android time terminal software: PDS Time works, but config file must be imported manually, camera is not addressed AIDA time works according to the manufacturer with our article numbers 174715/174716/174717/174888 and 182897 We are happy to provide the API/SDK for NFC/RFID and LED on request. NFC specifications: NXP PN7150 PN7150 is a fully-fledged NFC controller solution with integrated firmware and NCI interface for contactless communication at 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on the knowledge gained from previous NXP NFC device generations. It is the ideal solution for the rapid integration of NFC technology into any application, especially those working with O/S environments such as Linux and Android. - Full NFC Forum compliance with small form factor antenna - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to the main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - Highly efficient integrated power management unit (PMU) - Supported RF protocols - NFCIP-1, NFCIP-2 protocol (see [8] and [11]) - ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) - NFC Forum T3T via host interface - ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP - FeliCa PCD mode - MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) - NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) - ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU RK3399 RAM 4GB (4GB from batch 2023) Internal memory 32GB Operation system Android 10 Display Touch screen 10-point capacitive touch Panel 13" LCD panel Resolution 1920x1080 Active area 293(H)x164mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:9 Network WiFi 2.4/5GHz 802.11a/b/g/n Ethernet 100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB USB host Micro USB Micro USB OTG USB USB for serial RJ45 with POE RJ45 POE IEEE802.3at Power jack DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo jpeg, png, etc. Other VESA 204.5mm NFC NFC with 13.56M frequency)/RFID NXP Desfire Camera no built-in camera Microphone Microphone Speaker 2*1.5W LED light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter Adapter,12V/2.5A User manual yes    

***Used goods - B-goods, fully functional**** ALLNET Meeting Room LED Tablet 13 inch RK3399 Android 10 and RFID (NXP Mifare, Desfire)                                                                                            Includes power supply unit and integrated snap-in wall bracket with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms, etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, such as multi-party residential complexes. Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera is not addressed AIDA time     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer We are happy to provide the API/SDK for NFC/RFID and LED on request. NFC specifications: NXP PN7150 PN7150 is a fully-fledged NFC controller solution with integrated firmware and NCI interface for contactless communication at 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on the knowledge gained from previous NXP NFC device generations. It is the ideal solution for the rapid integration of NFC technology into any application, especially those working with O/S environments such as Linux and Android. - Full NFC Forum compliance with small form factor antenna - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to the main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - Highly efficient integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU  RK3399 RAM  2GB (4GB from batch 2023) Internal memory  16GB Operation system Android 10    Display Touch screen 10-Point capacitive touch Panel  13" LCD panel Resolution 1920x1080 Active area 293(H)x164mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:9 Network WiFi  2.4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56M frequency)/RFID NXP Desfire Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/2.5A User manual yes