Highlights: Gateway GSM for both incoming and outgoing calls Drastic reduction of fixed-to mobile phone calls costs Telephone SMS service dialer from alarm contact, remote control relay Ideal choice for calls in remote sites temporary or mobile offices, crafts and as emergency line Caller identity display (Calling Line 6 Identification service) Inbound and outbound call barring option Ring signal regeneration with sinusoidal 25Hz waveform Signal strength Led bar indicator 2,5 mt Antenna cable and Power supply included Programmable via local phone or remotely, via GSM call, SMS messages DIAL-101A is a brand new small-sized GSM Gateway reducing user’s mobile phone costs from PBX extension or standalone applications with a fast ROI (Return On Investment). Using DIAL-101A users can eliminate mobile cross-network fees as it securely transforms fixed-to-mobile in mobile-to-mobile calls exploiting its Dual-Band GSM Engine. The unit is equipped with a FXS port for connection to PBX, through an analog trunk interface, or to a normal DTMF telephone. DIAL-101A contains a SIM Card which enables the user to call mobile phones at low cost. For incoming calls, that is calls towards GSM engine SIM Card, DIAL-101A re-routes the call to PBX with modem transmission of the caller identity (CLI). Completely Plug&Play, that is simple to be installed, DIAL-101A allows to constantly monitor the signal strength by means of a led bar indicator on the front panel. DIAL-101A is programmable via DTMF telephone or via SMS. DIAL-101A is equipped with an alarm contact input with telephone dialer functionality and an internal relay with function of remote control of external devices and gate opening services. Main Features Built-in GSM Dual-Band 900/1800MHz engine Small size module High voice quality Plug & Play installation Programmable via local phone or remotely, via GSM call, SMS messages Conversation time-out Inbound and outbound call barring option DTMF tone or pulse selection Caller identity display option (Calling Line Identification service) Ring signal regeneration with sinusoidal 25Hz waveform 1 contact of external input for Alarm / Remote Notification service Internal relay contact for remote control of low power devices, in impulse or stable mode Possibility of 1U RACK 19” mounting for 3 devices Technical Details: Radiofrequency section Built-in GSM module Dual Band (900/1800MHz) Network Type GSM phase II SIM Card Transmitter Plug-in, 3V, small Transmitter Power 2W/900MHz-1W/1800MHz Receiver Sensitivity  > - 100 dBm Receiver Sensitivity 50 ? imped., FME conn. Antenna cable length 2,5mt Telephone section PBX connection analog trunk interface or analog telephone AC impedance (off-hook) 600 ? Line voltage (on-hook) 48 VDC Line current (off-hook) 25 mA max. Maximum loop resistance 800 ? Ring signal regeneration 65 VRMS, 25 Hz Dialing mode DTMF + pulse Other features Dimensions (HxWxD) 30 x 103 x 64 mm Operating Temperature Max. 0°C - 45 °C Relative Umidity 95% not condensing Weight 1 Kg. packaged with antenna and power supply Power supply (provided with system) Input 220VAC, 50Hz Output 12VDC, 1A Max relay capacity 30VDC - 200mA

Highlights: •  GSM Gateway for both incoming and outgoing calls •  Drastic reduction of fixed network to mobile phone calls costs •  Best choice for calls in remote sites, temporary or mobile offices, crafts and as emergency line •  CLIP service (Caller ID sending) •  DTMF or pulse dialing mode (to support older PABX) •  Inbound and outbound call barring option •  Ring signal regeneration with 25Hz sinusoidal waveform •  GSM signal strength information •  2.5 mt antenna cable and power supply included / fix not extendable •  Programmable via local phone or remotely, via GSM call or SMS messages DIAL-103A is a new small-sized GSM Gateway that reduces mobile phone costs from PBX extension or stand-alone applications with a fast ROI (Return On Investment). Using DIAL-103A, users can eliminate mobile cross-network fees as it securely transforms fixed-to-mobile in mobile-to-mobile calls exploiting its Dual-Band GSM Engine. The unit is equipped with a FXS port for connection to PBX, through an analog trunk interface, or to a normal DTMF telephone. DIAL-103A uses a SIM Card which enables the user to call mobile phones at low cost. For incoming calls, using internal GSM engine, DIAL-103A re-routes them to the PBX with modem transmission of the caller identity (CLI presentation). Completely Plug&Play, very simple to be installed, DIAL-103A allows to monitor the GSM signal strength via DTMF commands. DIAL-103A is programmable via DTMF tones or via SMS.  Main features: • Built-in GSM Dual-Band 900/1800MHz engine • Small size unit • High voice quality • Plug & Play installation • Programmable via local phone or remotely, via GSM call, SMS messages • Conversation time-out for outgoing calls • Inbound and outbound call barring option • Possibility of SIM CLI hiding on GSM net- work (CLIR) • Caller identity service over the wired line (Calling Line Identification Presentation) • Ring signal regeneration with 25Hz sinusoidal waveform • Advanced algorithm of echo cancellation • GSM signal strength monitoring •  Maintenance free Technical Details: Radiofrequency section Built-In GSM module Dual Band (900/1800MHz) Network type GSM, phase II SIM Card Plug-in, 1.8V - 3V, small Transmitter power 2W/900MHz 1W/1800MHz Receiver sensitivity > - 100 dBm Antenna    50 ?, 2 W Antenna cable length  2.5 mt., bundled Telephone section Connection RJ 11 for analog trunk interface (PBX) or analog telephone (BCA) AC impedance (off-hook) 600 ? Line voltage (on-hook)  48 VDC Line current (off-hook) 25 mA max Maximum loop resistance    : 800 ? Ring signal regeneration 60 VRMS, 25 Hz, 1REN Dialing mode    : DTMF + pulse Other features Dimensions (HxWxD) 30 x 75 x 137 mm Operating temperature 0°C - 45 °C Relative umidity 95% not condensing Weight 500 gr packaged Provided power supply    Input 230VAC, 50Hz, Output 12VDC, 1A