Rock Pi zbh. PoE Hat / Shield 802.3AT

Rock Pi 4 Model B 4GB (with dual band 2.4/5GHz WLAN/Bluetooth 5.0) with UFL connector for external antenna (176996)   Rockchip RK3399< Processor 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz GPU  Mali T860MP4 gpu, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 4GB Storage eMMC module Optional industrial compatible high performance eMMC module, 8G/16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD Display HDMI HDMI 2.0 up to 4k@60 Periphery MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 800MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2.4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering from PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup(optional) Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm  

Rock Pi 4 Model B 2GB (with dual band 2.4/5GHz WLAN/Bluetooth 5.0) with UFL connector for external antenna (176996)   Rockchip RK3399< Processor 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz GPU  Mali T860MP4 gpu, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 2GB Storage eMMC module Optional industrial compatible high performance eMMC module, 8G/16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD Display HDMI HDMI 2.0 up to 4k@60 Periphery MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 800MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2.4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering from PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup(optional) Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm

Rock Pi 4+ Model B OP1 2GB/16GB (mit Dualband 2,4/5GHz WLAN/Bluetooth 5.0) mit UFL Anschluss für ext. Antenne (176996) Rockchip OP1 64bit hexa core based SBC Small form-factor, rich feature set, outstanding design and performance. Rock Pi 4 is the perfect choice for your personal or business oriented projects. Rock Pi 4B+ product details OP1 64bit hexa core processor Dual Cortex-A72 (up to 2.0Ghz) plus quad Cortex-A53 (up to 1.5Ghz) Harvard Superscalar processor cores GPU  Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 2GB or 4GB SPI Flash 4MB SPI flash soldered - NVMe booting from SPI supported Wifi/BT Antenna Wifi/BT with external antenna support* *an uFL connector must be soldered on the board, which will then disable the on board antenna. Connector and soldering service available in the store! Onboard eMMC module Industrial level high performance eMMC storage, 16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD note: M.2 extension board plus heat-sink is recommended for proper mounting on Rock Pi 4 "+" Display HDMI HDMI 2.0 up to 4k@60 Peripherie MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic with improved mechanics HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 8MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2,4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering via PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm Essentials You Need ROCK PI 4 Model A or Model B / B+ / OP1 PD/QC compliant power adapter with USB- C port equal or larger than 15W Keyboard & Mouse Monitor with HDMI input Heat Sink  optional M.2 extension board ______________________________________________________ Additional information & Setup instructions https://wiki.radxa.com/Rockpi4 ______________________________________

Rock Pi 4+ Model B OP1 4GB/32GB (with dual band 2.4/5GHz WLAN/Bluetooth 5.0) with UFL connector for external antenna (176996) Rockchip OP1 64bit hexa core based SBC Small form-factor, rich feature set, outstanding design and performance. Rock Pi 4 is the perfect choice for your personal or business oriented projects. Rock Pi 4B+ product details OP1 64bit hexa core processor Dual Cortex-A72 (up to 2.0Ghz) plus quad Cortex-A53 (up to 1.5Ghz) Harvard Superscalar processor cores GPU  Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 2GB or 4GB SPI Flash not included in the scope of delivery Wifi/BT Antenna Wifi/BT with external antenna support* *an uFL connector must be soldered on the board, which will then disable the on board antenna. Connector and soldering service available in the store! Onboard eMMC module Industrial level high performance eMMC storage, 16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD note: M.2 extension board plus heat-sink is recommended for proper mounting on Rock Pi 4 "+" Display HDMI HDMI 2.0 up to 4k@60 Peripherals MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic with improved mechanics HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 8MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2.4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering via PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm Essentials You Need ROCK PI 4 Model A or Model B / B+ / OP1 PD/QC compliant power adapter with USB- C port equal or larger than 15W Keyboard & Mouse Monitor with HDMI input Heat Sink  optional M.2 extension board ______________________________________________________ Additional information & Setup instructions https://wiki.radxa.com/Rockpi4 ______________________________________

Rock Pi 4+ Model B OP1 4GB/64GB (with dual band 2.4/5GHz WLAN/Bluetooth 5.0) with UFL connector for external antenna (176996) Rockchip OP1 64bit hexa core based SBC Small form-factor, rich feature set, outstanding design and performance. Rock Pi 4 is the perfect choice for your personal or business oriented projects. Rock Pi 4B+ product details OP1 64bit hexa core processor Dual Cortex-A72 (up to 2.0Ghz) plus quad Cortex-A53 (up to 1.5Ghz) Harvard Superscalar processor cores GPU  Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 2GB or 4GB SPI Flash not included in the scope of delivery Wifi/BT Antenna Wifi/BT with external antenna support* *an uFL connector must be soldered on the board, which will then disable the on board antenna. Onboard eMMC module Industrial level high performance eMMC storage, 16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD note: M.2 extension board plus heat-sink is recommended for proper mounting on Rock Pi 4 "+" Display HDMI HDMI 2.0 up to 4k@60 Peripherals MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic with improved mechanics HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 8MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2.4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering via PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm Essentials You Need ROCK PI 4 Model A or Model B / B+ / OP1 PD/QC compliant power adapter with USB- C port equal or larger than 15W Keyboard & Mouse Monitor with HDMI input Heat Sink  optional M.2 extension board ______________________________________________________ Additional information & Setup instructions https://wiki.radxa.com/Rockpi4 ______________________________________

Rock Pi 4+ Model B OP1 4GB/128GB (with dual band 2.4/5GHz WLAN/Bluetooth 5.0) with UFL connector for external antenna (176996) Rockchip OP1 64bit hexa core based SBC Small form-factor, rich feature set, outstanding design and performance. Rock Pi 4 is the perfect choice for your personal or business oriented projects. Rock Pi 4B+ product details OP1 64bit hexa core processor Dual Cortex-A72 (up to 2.0Ghz) plus quad Cortex-A53 (up to 1.5Ghz) Harvard Superscalar processor cores GPU  Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 2GB or 4GB SPI Flash not included in the scope of delivery Wifi/BT Antenna Wifi/BT with external antenna support* *an uFL connector must be soldered on the board, which will then disable the on board antenna. Connector and soldering service available in the store! Onboard eMMC module Industrial level high performance eMMC storage, 16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD note: M.2 extension board plus heat-sink is recommended for proper mounting on Rock Pi 4 "+" Display HDMI HDMI 2.0 up to 4k@60 Peripherals MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic with improved mechanics HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 8MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2.4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering via PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm Essentials You Need ROCK PI 4 Model A or Model B / B+ / OP1 PD/QC compliant power adapter with USB- C port equal or larger than 15W Keyboard & Mouse Monitor with HDMI input Heat Sink  optional M.2 extension board ______________________________________________________ Additional information & Setup instructions https://wiki.radxa.com/Rockpi4 ______________________________________

Gigabit non-isolated PD PoE splitter can support IEEE802.3af/at standard, compatible with 12/36 &45/78 dual mode power supply. input voltage: 44-57VDC, output voltage: 5V or 12VDC, and maximum full load power is 24W. Hightlights: Gigabit rate self-adaption, 8P copper cable RJ45 port. Support IEEE802.3af/at standard, Both mid-span ( 4/5+, 7/8- ) and end-span ( 1/2+, 3/6- ) Output voltage 5V/12VDC optional, suitable for various network terminals Input voltage 44-57VDC, rated output power 12W, greater than 82% efficiency Short circuit, over-current and over-temperature protection 2000V high voltage isolation (input stage to output stage), less than 200mV output ripple Incl. approx. 10cm long hollow plug cable on hollow plug outside= 5,5mm & inside 2,1mm for direct connection to terminals with hollow plug socket ALL-PS102G-AF-AT is a gigabit PD PoE splitter independently developed by ALLNET. It has a 1*RJ45 input port, 1*RJ45 output port, and 1*DC 5,5mm / 2,1mm socket. Its DC5V/12V output voltage selection switch is to meet the use of various non-PoE network terminals to connect to PoE switches. Effectively solving security monitoring, wireless networks, Limited by the power line layout, reduced system wiring, improved system stability and safety, and reduced maintenance costs. ALL-PS102G-AF-AT PoE splitter adopts ABS and PC flame-retardant plastic material. It complies with IEEE802.3 af/at PoE standard, end-span (1,2+, 3,6-), and mid-span (4,5+, 7,8-) two power supply modes. The output power is up to 24W. Low ripple, >82% efficiency, 2KV port protection isolation. It has short-circuit, over-current, over-temperature protection. Plug and play, no configuration, easy to use. Technical Details: Model ALL-PS102G-AF-AT Interface Characteristics Fixed Port 2*10/100/1000Base-T RJ45 ports (Data) 1*DC5521 power socket(Power) Ethernet Port Ethernet port can support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption Network Characteristics Transmission Bandwidth (Rate) 10/100/1000Mbps Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter) Output VoltageSwitch 12V: DC12Voutput voltage (default) 5V: DC5Voutput voltage Network Protocol and Indicator Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T IEEE802.3x LED Indicator PoE indicator: POE (green), Power indicator: PWR (green) PoE & Power Supply PoE Port (PD) PD port IEEE802.3af/at @ POE   IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3x Power Supply Pin 1/2 (+), 3/6 (-),& 4/5 (+), 7/8 (-) Input Voltage 44-57VDC Output Voltage Default 12VDC ±0.5V, optional 5VDC ±0.5V Power Consumption Standby<1W, Full Load<24W Conversion Efficiency (Output: Input) ≥82% Physical Parameter Operation TEMP / Humidity -20~+55°C, 5%~90% RH Non condensing Storage TEMP / Humidity -40~+85°C, 5%~95% RH Non condensing Dimension (L*W*H) 103*50*29mm Net /Gross Weight <0.08kg /<0.1kg Lightning protection / protection level Lightning protection: 4KV 8/20us; Protection level: IP30 Marks CE