SNOM D713 VOIP Telefon (SIP), Gigabit Schwarz

Input 100-240V 50/60Hz 23-32VA Output: +5V 2.0 A Max + pole inside 5.5mm external / 2.1mm internal EU version ! Cable length = approx. 1.2m (can be extended by a further 1.5m with item 210287) Reinforced kink protection. Cable outlet at the top to save space in power strips. With fixed EU plug!!!!!

1 Paar. Erweitert den Aufnahmebereich von 30 m² auf 70 m². Inklusive Kabel in zwei Längen: 1,5 Meter und 2,5 Meter.

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

8-port 10/100/1000Mbit/s PoE Layer 2 Gigabit Ethernet Switch (4x 802.3af oder 2x 802.3at) Highlights: 8-Port 10/100/1000Mbit/s with 4x Ports  PoE AF or 2x PoE AT (30W) PoE performance 2x 30 Watt (IEEE802.3at) oor 4x 15,4 Watt (IEEE802.3af)internal power supplyfanless design      The ALL8804PoE+ provides high power and data using Power over Ethernet (PoE) over Cat-5 cable. The Eight Gigabit Ethernet ports can be used for any 10/100/1000 Mbps link and four of these ports can supply industry-standard IEEE 802.3af and two ports can supply IEEE 802.3at power.  ALL8804PoE+ delivers PoE to any small business network that wants to simplify the installation of IP-Phone and IP-based surveillance cameras.     Technical Details:  Standard ComplianceIEEE 802.3 10BaseTIEEE 802.3u 100BaseTXIEEE 802.ab 1000BaseTIEEE 802.3af PoEIEEE 802.3at PoEIEEE 802.3x Flow Control and Back-pressureIEEE 802.1p Class of ServiceSwitch FeaturesRJ-45 Ports: 8x 10/100/1000 MbpsMAC Address: 8KBuffer Memory: 2048K BytesJumbo Frames: 9.6KTransmission Method: Store and ForwardManagementN/APower100~240V/AC, 50~60HzPower consumption (without PoE)Max. 5 WattPower consumption (with PoE)Max. 65 WattCaseMetal housing 265 × 184 × 44 mm (W x D x H)Weight0.95 kgOperating temperature0 to 40°CStorage temperature-20 to 90°CHumidity10 to 90% (non-condensing)CertificatesFCC Class A, CE 

8-port 10/100/1000Mbit/s PoE Layer 2 Gigabit Ethernet Switch (8x 802.3af oder 4x 802.3at) Highlights: 8-Port 10/100/1000Mbit/s with full PoE PoE performance 4x 30 Watt (IEEE802.3at) or 8x 15,4 Watt (IEEE802.3af) internal power supply fanless Design   The ALL8808POE+ provides high power and data using Power over Ethernet (PoE) over Cat-5 cable. The Eight Gigabit Ethernet ports can be used for any 10/100/1000 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af and four ports can supply IEEE 802.3at power.  ALL8808POE+ delivers PoE to any small business network that wants to simplify the installation of IP-Phone and IP-based surveillance cameras. Technical Details:   Network standards IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.ab 1000BaseT IEEE 802.3af PoE IEEE 802.3at PoE IEEE 802.3x Flow Control and Back-pressure IEEE 802.1p Class of Service Switch Features RJ-45 Ports: 8x 10/100/1000 Mbps MAC Address: 8K Buffer Memory: 2048K Bytes Jumbo Frames: 9.6K Transmission Method: Store and Forward Management N/A Power 100~240V/AC, 50~60Hz Power (without PoE) Max. 5 watt Power (with PoE) Max. 150 watt Case Metal housing 265 × 184 × 44 mm (W x D x H) Weight 0.95 kg Operating temperature 0 to 40? Humidity 10 to 90% (non-condensing) Certificates FCC Class A, CE    

Flexible all-rounder - stereo The Snom A100D is a wired binaural headset whose lightweight and ergonomic design allows for fatigue-free wearing comfort. Wideband technology ensures high-definition audio quality for crystal clear communication. The powerful noise-canceling microphone allows for clean voice transmission, and the two high-quality speakers provide optimal shielding in areas with increased noise levels. The flexible headband and the various available Quick Release (QR) adapters make the headset not only versatile but also quick and easy to connect to all Snom phones. And due to the extremely lightweight design, it is super light at 79g and you almost forget that you are wearing a headset. There are 4 Quick Release adapters available for the Snom A100D: The Snom 4P4C Quick Release adapter cable with headset connector (Western plug) is included with the Snom A100D headset. The Snom ACPJ with a 3.5mm jack plug for Snom M-Series devices is optionally available. The Snom ACPJ25 with a 2.5mm jack plug for Snom MSC series devices is optionally available. The ACUSB for connection to Snom desk phones with USB port or a PC is optional available. Features Binaural wideband headset 300 ° rotatable, flexible microphone boom Microphone with passive noise cancellation Super light: 79g (without cable)  

Flexible all-rounder - mono The Snom A100M is a wired monaural headset whose lightweight and ergonomic design allows for fatigue-free wearing comfort. Wideband technology ensures high-definition audio quality for crystal clear communication. The high-performance noise-canceling microphone allows for clean voice transmission and the high-quality speaker ensures optimal shielding in areas with increased noise levels. The flexible headband and the various available Quick Release (QR) adapters make the headset not only versatile but also quick and easy to connect to all Snom phones. And due to the extremely lightweight design, it is super light at 59g and you almost forget that you are wearing a headset. There are 4 Quick Release adapters available for the Snom A100M: The Snom 4P4C Quick Release adapter cable with headset connector (Western plug) is included with the Snom A100M headset. The Snom ACPJ with a 3.5mm jack plug for Snom M-Series devices is optionally available. The Snom ACPJ25 with a 2.5mm jack plug for Snom MSC series devices is optionally available. The Snom ACUSB for connection to Snom desk phones with USB port or a PC is optional available. Features Monaural wideband headset 300 ° rotatable, flexible microphone boom Microphone with passive noise cancellation Super light: 59g (without cable)  

A DECT option for your Snom desk phone Flexible communication with hands-free calling and a straightforward conferencing solution are often essential in everyday office life. The Snom A230 DECT Dongle extends your Snom desk phone (with USB connection) on the one hand with the option to connect the Snom A150 headset (which comes with the Snom A230 DECT Dongle), on the other hand it extends, in combination with the Snom C52-SP, all desk phones of the Snom D7xx and D3xx series with USB connection with a flexible conference solution in just three steps. And that without any technical effort or additional phone number. You simply use the existing Snom desk phone as usual. The Snom A230 DECT USB dongle is connected via the existing USB port of the Snom desk phone and from then on serves as a DECT base. After a connection from the Snom A230 to the Snom C52 SP and or Snom A150 is established, calls can be made directly over it. Features Adds DECT option to Snom phones Allows connection Snom A150 and Snom C52-SP Plug & Play Pairing button with LED Translated with DeepL