Snom D385 VOIP Telefon (SIP) o. Netzteil

Input 100-240V 50/60Hz 23-32VA Output: +5V 2.0 A Max + pole inside 5.5mm external / 2.1mm internal EU version ! Cable length = approx. 1.2m (can be extended by a further 1.5m with item 210287) Reinforced kink protection. Cable outlet at the top to save space in power strips. With fixed EU plug!!!!!

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

suitable for: 300/320/360/370/720/760/820/821/870 includes DHSG cable for: 3xx/7xx/8xx snom Cordless Headset Adapter In addition to the wired snom headsets, cordless headsets are very popular in the professional business environment, such as in call centers. The snom Headset Adapter, for controlling cordless headsets according to the DHSG standard, forms the bridge between professional VoIP telephony and professional cordless headsets. The snom Headset Adapter offers an interface according to the DHSG standard, which enables electronic call acceptance directly at the headset. As soon as the phone receives a call, the incoming call is signaled in the headset via the original ring tone and the call can be conveniently answered and ended at the headset. Whether for business in larger or smaller companies, or for call centers - the newly gained freedom of movement pays off immediately. Important features: Complete freedom of movement Ringtone signaling Call acceptance at the headset Call termination at the headset Perfect firmware integration DHSG standard No additional power supply Simple connection ATTENTION: snom 300 only from MAC address 00041328XXXX and FW 7.3.30.

1 Paar. Erweitert den Aufnahmebereich von 30 m² auf 70 m². Inklusive Kabel in zwei Längen: 1,5 Meter und 2,5 Meter.

M9r base station only

A210 USB WiFi Dongle

Flexible all-rounder - stereo The Snom A100D is a wired binaural headset whose lightweight and ergonomic design allows for fatigue-free wearing comfort. Wideband technology ensures high-definition audio quality for crystal clear communication. The powerful noise-canceling microphone allows for clean voice transmission, and the two high-quality speakers provide optimal shielding in areas with increased noise levels. The flexible headband and the various available Quick Release (QR) adapters make the headset not only versatile but also quick and easy to connect to all Snom phones. And due to the extremely lightweight design, it is super light at 79g and you almost forget that you are wearing a headset. There are 4 Quick Release adapters available for the Snom A100D: The Snom 4P4C Quick Release adapter cable with headset connector (Western plug) is included with the Snom A100D headset. The Snom ACPJ with a 3.5mm jack plug for Snom M-Series devices is optionally available. The Snom ACPJ25 with a 2.5mm jack plug for Snom MSC series devices is optionally available. The ACUSB for connection to Snom desk phones with USB port or a PC is optional available. Features Binaural wideband headset 300 ° rotatable, flexible microphone boom Microphone with passive noise cancellation Super light: 79g (without cable)  

Flexible all-rounder - mono The Snom A100M is a wired monaural headset whose lightweight and ergonomic design allows for fatigue-free wearing comfort. Wideband technology ensures high-definition audio quality for crystal clear communication. The high-performance noise-canceling microphone allows for clean voice transmission and the high-quality speaker ensures optimal shielding in areas with increased noise levels. The flexible headband and the various available Quick Release (QR) adapters make the headset not only versatile but also quick and easy to connect to all Snom phones. And due to the extremely lightweight design, it is super light at 59g and you almost forget that you are wearing a headset. There are 4 Quick Release adapters available for the Snom A100M: The Snom 4P4C Quick Release adapter cable with headset connector (Western plug) is included with the Snom A100M headset. The Snom ACPJ with a 3.5mm jack plug for Snom M-Series devices is optionally available. The Snom ACPJ25 with a 2.5mm jack plug for Snom MSC series devices is optionally available. The Snom ACUSB for connection to Snom desk phones with USB port or a PC is optional available. Features Monaural wideband headset 300 ° rotatable, flexible microphone boom Microphone with passive noise cancellation Super light: 59g (without cable)  

The modern stereo over-ear headset The first full-featured over-ear headset from Snom (Snom A330D) features speakers with full-band audio and a microphone with passive noise cancellation. This means that from now on, "Full concentration on the conversation." Because ambient noise is reliably suppressed. The replaceable ear cushion is made of soft leatherette with memory foam filling. This means it can be used all day without causing unpleasant pressure points. For long-lasting comfort, the adjustable headband is also padded and is 35 mm long. The headset can be connected to a Snom IP desk phone or computer via USB. Thus, it can be used not only for making calls, but it works with the current popular communication software platforms. Features Full band audio Remote control with LED display and 5 buttons USB connection Works with current communication software platforms 270° rotatable microphone boom  

The modern mono over-ear headset The first full over-ear headset from Snom (Snom A330M) a speaker with full-band audio and a microphone with passive noise cancellation. This means that from now on, "Full concentration on the conversation." Because ambient noise is reliably suppressed. The replaceable ear cushion is made of soft leatherette with memory foam filling. This means it can be used all day without causing unpleasant pressure points. For long-lasting comfort, the adjustable headband is also padded and is 35 mm long. The headset can be connected to a Snom IP desk phone or computer via USB. Thus, it can be used not only for making calls, but it works with the current popular communication software platforms. Features Full band audio Remote control with LED display and 5 buttons USB connection Works with current communication software platforms 270° rotatable microphone boom  

Small, lightweight and fits in any ear The Snom A150 is one of the smallest and lightest DECT headsets in its class. Despite the compact design, the device convinces in use with its first-class wideband sound and the high DECT range of up to 15m without any loss of quality. Thanks to the integrated battery, continuous calls of several hours are no problem. Per Plug and Play via the included USB stick Snom A230 DECT Dongle connects the headset easily to any Snom phone with USB port, whereupon you can start calling immediately. The Snom A150 DECT headset is the perfect companion for those who like to work on the go. Features Wireless DECT headset High range Microphone with passive noise cancellation Over-the-ear wearing style with multiple earpieces Compatible Snom phones: - Snom D3XX and D7XX series phones with USB connection - Snom C520 WiMi conference phone.  

Schwarz mit leichtem Blaustich für D3XX, 3XX

5-port 10/100/1000M PoE Ethernet Switch with 2-port PoE and 1-port PD Highlights: 5-Port 10/100/1000BaseT(X) with 2 PSE Port and 1 PD Port Compliant with 2x IEEE 802.3af PSE and IEEE802.3at PD Input Metal case with Palm, Size NO power supply needed when powered over PD Port FANLESS DESIGN   The device is a powerful, high-performance Gigabit Ethernet Switch, with all 5 ports capable of 10/100/1000Mbps auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps network with no pain.     This switch supports PoE pass-through, having both PD (Powered Device) and PSE (Power Sourcing Equipment) features in one single device, which means the switch could get power from the PD port by connecting to a PSE device and supply power on the 2 PSE ports for connected devices via CAT 5e or better twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone (PD devices) to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety.     The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LED indicators on the front-panel provide the operating status of individual port and whole system.     Technical Details:     Standards IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet (PD INPUT) IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3x Flow Control Features Number of Ports: 5 10/100/1000BaseT(X) with 2 PSE Port and 1 PD Port Transmission Method: Store and Forward Filtering/Forwarding Rates 1000Mbps port ? 1,488,000pps 100Mbps port - 148,800pps 10Mbps port - 14,880pps Buffer Memory 128K Bytes frame Buffer MAC Table 4000 Transmission Media 10/100BaseTX Cat. 5 UTP/STP 1000BaseT Cat. 5E UTP/STP Led Indicators Device: 1x Power  1x Uplink 1x PD per Port:  je 1x LINK/ACT 2x PoE PSE Power Supply 48V/DC with 36W or 1x Port PoE IEEE802.3at INPUT Power Budget Powered from PD Port : 25W "Uplink PD" Powered from PD Port and 36W power adaptor :36W (The power adaptor is for optional) Dimensions 115 × 85 × 26 mm (L x W x H) Weight 0,4kg Operating Temperature 0 to 50°C Humidity 10 to 90% RH (non-condensing) Certifications FCC Class B, CE  

8-port 10/100/1000Mbit/s PoE Layer 2 Gigabit Ethernet Switch (4x 802.3af oder 2x 802.3at) Highlights: 8-Port 10/100/1000Mbit/s with 4x Ports  PoE AF or 2x PoE AT (30W) PoE performance 2x 30 Watt (IEEE802.3at) oor 4x 15,4 Watt (IEEE802.3af)internal power supplyfanless design      The ALL8804PoE+ provides high power and data using Power over Ethernet (PoE) over Cat-5 cable. The Eight Gigabit Ethernet ports can be used for any 10/100/1000 Mbps link and four of these ports can supply industry-standard IEEE 802.3af and two ports can supply IEEE 802.3at power.  ALL8804PoE+ delivers PoE to any small business network that wants to simplify the installation of IP-Phone and IP-based surveillance cameras.     Technical Details:  Standard ComplianceIEEE 802.3 10BaseTIEEE 802.3u 100BaseTXIEEE 802.ab 1000BaseTIEEE 802.3af PoEIEEE 802.3at PoEIEEE 802.3x Flow Control and Back-pressureIEEE 802.1p Class of ServiceSwitch FeaturesRJ-45 Ports: 8x 10/100/1000 MbpsMAC Address: 8KBuffer Memory: 2048K BytesJumbo Frames: 9.6KTransmission Method: Store and ForwardManagementN/APower100~240V/AC, 50~60HzPower consumption (without PoE)Max. 5 WattPower consumption (with PoE)Max. 65 WattCaseMetal housing 265 × 184 × 44 mm (W x D x H)Weight0.95 kgOperating temperature0 to 40°CStorage temperature-20 to 90°CHumidity10 to 90% (non-condensing)CertificatesFCC Class A, CE 

8-port 10/100/1000Mbit/s PoE Layer 2 Gigabit Ethernet Switch (8x 802.3af oder 4x 802.3at) Highlights: 8-Port 10/100/1000Mbit/s with full PoE PoE performance 4x 30 Watt (IEEE802.3at) or 8x 15,4 Watt (IEEE802.3af) internal power supply fanless Design   The ALL8808POE+ provides high power and data using Power over Ethernet (PoE) over Cat-5 cable. The Eight Gigabit Ethernet ports can be used for any 10/100/1000 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af and four ports can supply IEEE 802.3at power.  ALL8808POE+ delivers PoE to any small business network that wants to simplify the installation of IP-Phone and IP-based surveillance cameras. Technical Details:   Network standards IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.ab 1000BaseT IEEE 802.3af PoE IEEE 802.3at PoE IEEE 802.3x Flow Control and Back-pressure IEEE 802.1p Class of Service Switch Features RJ-45 Ports: 8x 10/100/1000 Mbps MAC Address: 8K Buffer Memory: 2048K Bytes Jumbo Frames: 9.6K Transmission Method: Store and Forward Management N/A Power 100~240V/AC, 50~60Hz Power (without PoE) Max. 5 watt Power (with PoE) Max. 150 watt Case Metal housing 265 × 184 × 44 mm (W x D x H) Weight 0.95 kg Operating temperature 0 to 40? Humidity 10 to 90% (non-condensing) Certificates FCC Class A, CE    

ALLNET Switch full managed 24 Port Gigabit 390W / 24x PoE+ / 4x SFP / FANLES / 19" / "ALL-SG8626PM" Cost-effective 24 Port Smart Managed Gigabit Layer-2 Switch + 4x SFP MiniGbic Slots without Fan for Desktop and 19" Rack Installation Highlights: 24 Port Gigabit Layer2+ Switch Architecture Port 23/24 combo ports for TP or SFP + Port 25/26 SFP slots Supports various PoE management functions, including PoE shedule, PoE PD alive, etc. Supports SFP DDM & cable diagnostics Supports G.8032 ERPS, self-detection time < 20 ms Supports port aggregation 4KV surge protection, 6KV contact/8KV air ESD protection Totally fanless, no more annoying noise....  max. 390W budget 19 "inch angle or wall/table mounting possible ALL-SG8626PM is a layer 2+ full managed switch PoE, which supplies 24**10/100/1000M RJ45 ports and 4*1G uplink  SFP slot ports ( 2 shared combo), with 24 port PoE with IEEE802.3 af/at standards, single port POE power output up to 30W. Rich PoE Management Function Being the managed PoE switches for CCTV surveillance, wireless and VoIP networks, ALL-SG8626PM features the following special PoE management functions: PoE PD-alive check Scheduled power rebooting PoE schedule PoE usage monitoring Soft-reboot PoE Non-stop PoE port power feeding priority Smart PoE PD-Alive Check ALL-SG8626PM managed PoE switch can be configured to monitor connected PD status in real time. Once the PD stops working and responding, ALL-SG8626PM will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden. PoE Schedule Function for Energy Saving For environmental protection purpose, the ALL-SG8626PM switch Ethernet PoE can effectively control the power supply besides its capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled PD Re-starting The ALL-SG8626PM smart switch PoE allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. Fast Recovery Redundant Ring for Critical Network Applications The ALL-SG8626PM supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. Strong Layer 2 Features The ALL-SG8626PM layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. Via the aggregation of supporting ports, the ALL-SG8626PM allows the operation of a high-speed trunk group that comes with multiple ports and supports fail-over as well. Efficient and Various Management Methods For efficient management, the ALL-SG8626PM is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, it offers an easy-to-use, platform-independent management and configuration facility. For text-based management, it can be accessed via Telnet and the console port. For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management. Intelligent PoE Switch SFP DDM Function The ALL-SG8626PM supports SFP-DDM (digital diagnostic monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Technische Daten: Model ALL-SG8626PM Copper Ports 22-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Combo Interfaces 2x 100/1000BASE-X SFP interface shared with port-23 and port-24; Supports 100/1000Mbps dual mode and DDM Fiber Ports 2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode PoE Ports 1~24-802.3af/802.3at PoE Injector Ports Console Ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 52 Gbps/non-blocking Throughput 38.69Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 Bytes SDRAM 1Gb Flash Memory 128Mb Flow Control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset Button >2 sec.: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power Consumption Max. 400 watts/1122 BTU PoE Standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED Indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 24): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 22 to Port 24): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation Flow Control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link Aggregation Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorith based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunneling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast Routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting (Ingress/Egress) Stri Priority Security Features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload  Dual Firmware LLDP Configuration Export/Import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other Features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE Non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static Routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 440x290x44.5 mm Weight 4.5 kg Working Temperature -10 °C to 45 °C Storage Temperature -20 °C to 70 °C MTBF 50,000hrs