Synergy 21 LED Controller 3654 Erweiterungsslave

Mounting bracket set 2pcs. including screws/nuts for ALL4500/3690/3691/4075/4076/PL3651/PL3551

LED Flex Strip RGB, common positive pole DC24V, max. 3A, 72W, 300Leds, 120°, 5050SMD Lumen: 2400 Length: 5000*12*5mm, can be shortened: all 6 LEDs can be shortened (10 cm) white PCB outdoor, filled tube, IP68 Suitable up to -25°C! Adhesive tape for mounting aid on the back Energy efficiency class: A kWh/1000h: 72 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed an operating temperature of 45°C, otherwise the service life cannot be guaranteed.

Colour selection between 3000-7000K possible with controller ww: 3000K ±250, cw: 6500K ±250 5 metres, (5000*10*2.5mm) 24 Volt, common positive pole, 48 Watt total, 10W/M 3000Lm 600 normal power 3528SMD LED DC24V, 24W per colour, non-waterproof Shortenable all 12 LED Adhesive tape for mounting aid on the back Strip can be shortened at marking points with sharp scissors. !Attention! Strip must first be checked for functionality. Only split the strip when no current is present. Package contents: Cable 20 cm with click plug and coupling Energy efficiency class: A kWh/1000h: 48 Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed.

Colour selection between 3000-7000K possible with controller ww: 3000K ±250, cw: 6500K ±250 5 metres, (5000*11*3mm) 24 Volt, common positive pole, 72 Watt total, 14.4W/M 6000Lm 600 high power 3528SMD LED DC24V, 36W per colour, non-waterproof Shortenable all 12 LED Adhesive tape for mounting aid on the back Strip can be shortened at marking points with sharp scissors. !Attention! Strip must first be checked for functionality. Only split the strip when no current is present. Energy efficiency class: A kWh/1000h: 72 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guaranteed.

Hollow socket (DC socket) with screw terminals 2.1 x 5.5 mm. Suitable for Synergy21 LED Strips, etc. The connection of the plugs is not standardised. The outer conductor is often negative. Length/width/height in mm 39.5/14.6/13 Weight: 7 grammes

Hollow plug (DC plug) 2.1 x 5.5 mm with screw terminals. Suitable for Synergy21 LED Strips, etc. Plug: 2.1 x 5.5 mm The connection of the plugs is not standardised. The outer conductor is often negative. Length/width/height in mm 38.5/13.9/12.8 Weight: 5.5 grammes

LED strip mounting clip made of silicone 10 pieces pack 10clamps

Input: 180~305VAC, 254 ~ 431VDC Output: 6.3A, 24V DC, 151.2W Operating temperature: -25°C to +65°C LxWxH 191x63x37.5mm Please refer to the data sheet for exact technical details. The connection of electrical components and systems may only be carried out by only be carried out by qualified specialists!

LED light source distributor for 12V or 24V LED products Connect LED strips or LED light sources simply and easily. Suitable for Portaluce controller PL3651/PL3551 or Synergy 21 Lightcontroller 3653/3654/3655 10-way distributor, 1*input and 9*output max. 10A per Phoenix terminal (12V or 24V) L(without fixing lugs): 16.1cm L(with fixing lugs): 18.1cm WxH:7.9cmx2.5cm