* USED * ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 19" • Fanless • ALL-SG8310v2PM* *USED Damaged packaging

ALLNET

Prices excl. VAT plus shipping costs

Product number: 251333

EAN: 4038816251336

Manufacturer Number: ALL-SG8310v2PM-USED

Weight: 2,620 KG

Product information "* USED * ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 19" • Fanless • ALL-SG8310v2PM* *USED Damaged packaging "

Attention: USED item damaged packaging. See pictures. One packaging has been damaged during bulk delivery.

ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 19" • Wireless • ALL-SG8310v2PM

Highlights:

8-port 10/100/1000Mbit/s with full PoE support
2x SFP slots for optional MiniGBICS
PoE power 8x a' 30 watts (IEEE802.3at or 8x IEEE802.3af)
LÜFTERLESS DESIGN with internal power supply
Jumbo frames and IGMP snooping support
Link aggregation and rapid spanning tree
IEEE802.1q VLAN tagging and 802.1p priority queues
PoE budget 140 W

The ALL-SG8310v2PM is an 8-port 10/100/1000Mbps switch with PoE support on all ports that is perfect for segmenting larger networks. It is an excellent choice to provide your network with more power and efficiency.

IEEE 802.3af&at Power over Ethernet (PoE)
The ALL-SG8310v2PM supports the PoE standard IEEE 802.3at on 4 ports with up to 30 watts of power per port for the connected PoE end devices or the full power according to IEEE802.3af with up to 15.4W on 8 ports. The maximum PoE budget is 140W. The ALL-SG8310v2PM utilises the existing LAN cabling for the power supply. This facilitates the installation of PoE end devices such as WLAN access points, IP cameras, VoIP telephones and much more, as there is no need to take power sockets into account during installation. The PoE ON/OFF function allows the administrator to conveniently reset the end devices remotely by switching off the PoE power supply for each individual port.
High-speed networking/jumbo frames support
The ALL-SG8310v2PM offers an excellent solution for expanding your gigabit network. With Gigabit speed, this product offers high flexibility and high bandwidth for connectivity to servers, workstations and other connected devices. In addition, it also supports 9.6K jumbo frames for better network utilisation, which greatly improves the transmission of large files.

Extensive administration/management functions
Modern applications for video surveillance with IP cameras and Voice over IP are increasingly replacing traditional analogue technologies. This also increases the demands on the network infrastructure. The ALLNET ALL-SG8310v2PM is equipped with many management and security functions for all modern communication scenarios. IGMP Snooping, Tagged VLAN, Quality of Service, Port Trunking, Flow Control, Storm Control, Link Aggregation, IEEE802.1x, SNMP v1/ v2c and Spanning Tree are just a small excerpt from the extensive function portfolio of the ALL-SG8310v2PM. For more details, see Technical details.

Technical details:

Items	Specifications
Model No.	ALL-SG8310v2PM
Key Components	RTL8382M Flash IC:16MB DDR: 1Gb IP808AR PSE controller
I/O ports	8x GbE ports, RJ45 2 x SFP Giga ports Reset button: reset to default setting, re-start system Console port by RTJ45 Type
PoE ports	Port# 1~ 8 IEEE802.3at, IEEE802.3af
LED Define	PWR/SYS: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE Max power Alert On: Over PoE Max power Alert Port LED: Link/ACT: Off: port disconnected or link fail Green on: 10/100/1000Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on SFP: - Off: disconnected or fail - Green: 100/1000Mbps connected - Blinking: data transmitting
HW feature	IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3az EEE IEEE802.3at, IEEE802.3af MAC address table: 8K Packet buffer size: 4.1M Jumbo Frame: 9K bytes
Console	Support Cisco-like CLI command
Security	DT Security circuit.
PoE power pin-out	Alternative A (pin 1,2/3,6)
PoE output power capacity	Maximum output :30W per each port Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discovers the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable
Power Input	Internal power supply Input: 100-240V AC Output: 180W
PoE power budget	140W
Reset button	Support reset to default configuration
Dimension	265(W) x 183(D) x 44(H) mm
FAN design	Fan-less
Temperature	Operating: 0 ~ 40? Storage : -40 ~ 70?
Humidity	Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing)

Software features

Status	System information
	Logging message
	Port	Statistics
		Error Disabled
		Bandwidth Utilisation
	Link aggregation
	MAC Address Table	8K
Network	IP Address	Static / Dynamic
Network	System Time	SNTP / From Computer / Manual Time
Port	Port setting	State / Speed / Duplex / Flow Control
	Error Disabled	Recovery Interval	ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood
	Link aggregation	Group
		Port Setting	State / Speed / Flow Control
		LACP
	EEE
	Jumbo Frame	9K bytes
PoE	Global Setting	Schedule Status
	Priority Setting
	Power Limit
	Power Show
VLAN	VLAN	Create VLAN
		VLAN Configuration
		Membership
		Port Setting
	Voice VLAN	Property
	Voice VLAN	Voice OUI
	Protocol VLAN	Protocol Group
	Protocol VLAN	Group Binding
	MAC VLAN	MAC Group
	MAC VLAN	Group Binding
	Surveillance VLAN	Property
	Surveillance VLAN	Surveillance OUI
	GVRP	Property
		Membership
		Statistics
MAC Address Table	Dynamic Address	Aging Time
	Static Address
	Filtering Address
Spanning Tree	Property	State / Operation Mode / Path Cost / BPDU Handling	Operation Mode : STP/RSTP/MSTP
	Port Setting
	MST Instance
	MST Port Setting
	Statistics
Discovery	LLDP	Property
		Port Setting
		MED Network Policy
		MED Port Setting
		Packet View
		Local Information
		Neighbour
		Statistics
Multicast	General	Property	Unknown Multicast Action / Multicast Forward Method
		Group Address
		Router port
		Forward All Table
		Throttling
		Filtering Profile
		Filtering Binding
	IGMP snooping	Property	State / Version / Report Suppression
		Transverse
		Statistics
	MLD snooping	Property	State / Version / Report Suppression
	MLD snooping	Statistics
	MVR	Property	State / VLAN / Mode / Group Start / Group Count / Query Time
		Port Setting
		Group Address
Security	RADIUS
	TACACS+
	AAA	Method List
	AAA	Login Authentication	Console / Telnet / SSH / HTTP / HTTPS
	Management access	Management VLAN
		Management Service	Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout
		Management ACL
		Management ACE
	Authentication Manager	Property
		Port Setting
		MAC-Based Local Account
		WEB-Based Local Account
		Sessions
	Port Security
	Protected port
	Storm Control		State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown)
	DoS	Property
	DoS	Port Setting
	Dynamic ARP Inspection	Property
	Dynamic ARP Inspection	Statistics
	DHCP snooping	Property
		Statistics
		Option82 Property
		Option82 Circuit ID
	IP Source Guard	Port Setting
		IMPV Binding
		Save Database
ACL	MAC ACL
	MAC ACE
	IPv4 ACL
	IPv4 ACE
	IPv6 ACL
	IPv6 ACE
	ACL Binding
QoS	General	Property	CoS / DSCP / CoS-DSCP / IP Precedence
		Queue scheduling	Strict Priority / WRR
		CoS mapping
		DSCP mapping
		IP Precedence Mapping
	Rate limit	Ingress / Egress Port
	Rate limit	Egress queue
Diagnostics	Logging	Property	Console / RAM / Flash
	Logging	Remote server
	Mirroring
	Ping
	Tracer route
	Copper test
	Fibre modules
	UDLD	Property	Message Time
	UDLD	Neighbour
Management	User account
	Firmware	Upgrade / backup	Action (Upgrade / Backup) / Method (TFTP / HTTP)
	Firmware	Active Image	Active Image / Backup Image
	Configuration	Upgrade / Backup	Action (Upgrade / Backup) / Method (TFTP / HTTP)
	Configuration	Save Configuration	Source File / Destination File, Restore Factory Default
	SNMP	View
		Group
		Community
		User
		Engine ID
		Trap event	Authentication Failure / Link UP_Down / Cold Start / Warm Start
		Notification
RMON	Statistics
	History
	Event
	Alarm

Article properties

Anzahl Ports PoE/LAN:	24/0
Belüftung Switch:	Lüfterlos
Einsatzort Switch:	19"
LAN Geschwindigkeit:	1Gbit/s
Management:	full managed
PoE Budget:	<500 Watt
PoE Port Leistung:	30W at
SFP Geschwindigkeit:	SFP 1GBit
SFP Port Anzahl:	4

*** USED *** ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 19" • Fanless • ALL-SG8310v2PM* ***USED Damaged packaging **

Product information "*** USED *** ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 19" • Fanless • ALL-SG8310v2PM* ***USED Damaged packaging **"