Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black
MSRP: €112.79
Available, delivery time: 2-3 Tage
Product information "Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black"
Compact, second-generation NFC card reader and request-to-exit device that supports hand-wave door unlocking.
Unlock using an NFC card or UniFi Identity mobile app
Additional handwave unlock functionality
Entry and exit greeting messages
Connects to UniFi Access Hub using PoE
IP55 weather resistance (-30 to 45° C)
Technical Specifications
| Mechanical | |
|---|---|
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Enclosure material | Polycarbonate, glass |
| Mounting | In wall, gang box |
| Weatherproofing | IP55 |
| Hardware | |
| Networking interface | (1) 10/100 MbE RJ45 port |
| Connectivity | BLE 4.1 |
| Power method | PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU |
| Supported voltage range | 48V DC |
| Max. power consumption | 5W |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) 8 ohm, 0.7W |
| LEDs | R/G/B/W |
| Button | (1) Factory-reset |
| NFC frequency | 13.56 MHz |
| NFC read range | < 30 mm |
| NFC standards | ISO 14443A, 14443B, 15693 |
| NFC technology | NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire |
| Operating environment | Outdoor use |
| Ambient operating temperature | -30 to 45° C (-22 to 113° F) |
| Ambient operating humidity | 5 to 90% noncondensing |
| Software information | The software version of a product can be checked at https://unifi.ui.com |
| UL 294 level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I |
| UL 294 statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| PoE cabling requirements | Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-G2/UA-G2-Black, V02 |
| LED | |
| System | Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware Strobing red: Emergency lockdown |
| Software | |
| Management application | UniFi Access: Version 1.5.9 and later |
UniFi Access Hub UniFi® Access Hub ist ein intelligenter IP-Netzwerk-Single-Door-Controller, der Teil der UniFi Access-Lösung ist. Model: UA-Hub Der UniFi Access Hub verfügt über vielseitige Schnittstellen, einschließlich Unterstützung für die meisten elektrischen Bolzen / Schläge, Magnetschlösser und 12-V-Zugangszubehör wie Bewegungssensoren, Druckknöpfe und Alarme. Die drei mit Ethernet PoE betriebenen Leseschnittstellen minimieren den Verkabelungsaufwand und bieten eine bequeme Möglichkeit, eine UniFi G3-Flex-Überwachungskamera für zusätzliche Sicherheit hinzuzufügen. Die nahtlos integrierte UniFi Access-Lösung wird mit der UniFi Access Controller-Software verwaltet. Verwalten Sie Benutzer, Besucher, Zeitpläne und Zugriffsrichtlinien mit der intuitiven browserbasierten Oberfläche. Eigenschaften: Angetrieben von 802.3bt (PoE ++) Switch Drei 802.3af PoE-Ports für UniFi-Lesegeräte und G3 Flex-Überwachungskamera 12-V-Relais und Trockenrelais, die mit den meisten Schlössern kompatibel sind Vier Eingänge für Bewegungssensoren, Request-to-Exit-Geräte und Türpositionsschalter Verwaltet mit UniFi Access Controller in UDM-Pro DIN-Schienenmontage Hinweis: Zum Ausführen von UniFi Access ist UniFi Dream Machine Pro erforderlich
Available, delivery time: 2-3 Tage