Ubiquiti UniFi Access Reader Gen3 • black • UA-G3-B
MSRP: €131.06
Approximately deliverable on: delivery date unknown
Product information "Ubiquiti UniFi Access Reader Gen3 • black • UA-G3-B"
Highlights:
- Unlock with an NFC card, the UniFi Identity mobile app or a Touch Pass
- Supports unlocking with a hand gesture as a prompt to leave
- Provides welcome messages when entering and exiting
- Weather resistance according to IP55 (-30 to 45 °C)
- Connection to the UniFi Access Hub üvia PoE
Technical data:
| Mechanical | |
|---|---|
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4 inches) |
| Weight | 82 g (2.9 oz) |
| Favourite material | Polycarbonate, glass |
| Mounting material | Aluminium alloy |
| Mounting | In the wall, junction box |
| Weather resistance | IP55 |
| Hardware | |
| Network interface | (1) 10/100 MbE RJ45 connection |
| Connectivity | BLE 4.1 NFC |
| Power method | PoE UL 294 Class 2 power-limited power supply UL 60950-1/62368-1 LPS/PS2 power supply |
| Supported voltage range | 48 V direct current |
| Max. Power consumption | 5 W |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) 8 Ohm, 0.7W |
| LEDs | (1) Status light (learn more) |
| Button | (1) Factory reset |
| NFC frequency | 13.56 MHz |
| NFC read range | < 30 mm |
| NFC technology | ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0 |
| Operating environment | Außen area |
| Operating ambient temperature | -30 to 45 °C (-22 to 113 °F) |
| Humidity during operation | 5 to 90 % non-condensing |
| Software information | The software version of a product can be checked at https://unifi.ui.com üft. |
| UL 294 level | First attack: Level I Line safety: Level I Endurance: Level I Standby power: Level I |
| UL 294 declaration | Compliance with IEEE 802.3 specifications has not been verified under UL 294. The equipment shall comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| Requirements for PoE cabling | The recommended minimum power category is cable 5e. The power category used should correspond to the transmission speed required at the installation site. The minimum conductor cross-section for the connection between PSE or Power Injector and PD is 26 AWG (0.13 mm2 ) for patch cables; 24 AWG (0.21 mm2 ) for horizontal or riser cables. |
| CAN/ULC-60839-11-1 quality | Note assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number and issue date or revision status | UA-G3, V01 |
| Software | |
| Administrative application | UniFi Access: Version 3.0.15 and higher |
Keyed emergency override for your Access Hub. Manual unlock port with two physical keys included Backup entry for malfunctioning fail-safe or secure* lock systems *Does not provide redundant power for fail-secure systems. Technical Specifications Mechanical Dimensions Ø60 x 74 mm (Ø2.4 x 2.9") Weight 94 g (3.32 oz) Enclosure Materials Polycarbonate Hardware Terminal block COM/NO/NC 18-24 AWG Key switch Brass internal wave key, 28VDC, 4A Operating temperature -30 to 65° C (-22 to 149° F) Storage temperature -40 to 85° C (-40 to 185° F) Operating humidity 5 - 95% noncondensing Certifications FCC, IC, CE
Approximately deliverable on: delivery date unknown
Highly secure NFC smart fob that uses multi-layer encryption, including proprietary UniFi Access security protocols. Multi-layer encryption Waterproof, IP54-rated casing (10) UA Pockets per pack Technical Specifications Mechanical Dimensions 84 x 39 x 7.4 mm (3.3 x 1.5 x 0.29") Weight 16 g (0.56 oz) Enclosure material Polycarbonate, stainless steel, silicone rubber Weatherproofing IP54 Hardware NFC frequency 13.56 MHz NFC technology ISO/IEC 14443 Type A MIFARE DESFire EV3 4K UniFi Access Proprietary Security Protocol Operating temperature -10 to 45° C (14 to 113° F) Operating humidity 10 to 90% noncondensing Certification CE
Approximately deliverable on: delivery date unknown
Connection box for UniFi Access Reader and Intercom Viewer, which supports flat surface mounting and connection to 3/4-inch pipes. Compatibility: UA-G2 UA Intercom Viewer UA-Ultra Technical data: Mechanical Dimensions 145 x 88 x 50 mm (5.7 x 3.5 x 2 inches) Weight 220 g Mounting material Polycarbonate, sponge, rubber Mounting Wall, VESA mount
Approximately deliverable on: delivery date unknown
UniFi Access Hub UniFi® Access Hub ist ein intelligenter IP-Netzwerk-Single-Door-Controller, der Teil der UniFi Access-Lösung ist. Model: UA-Hub Der UniFi Access Hub verfügt über vielseitige Schnittstellen, einschließlich Unterstützung für die meisten elektrischen Bolzen / Schläge, Magnetschlösser und 12-V-Zugangszubehör wie Bewegungssensoren, Druckknöpfe und Alarme. Die drei mit Ethernet PoE betriebenen Leseschnittstellen minimieren den Verkabelungsaufwand und bieten eine bequeme Möglichkeit, eine UniFi G3-Flex-Überwachungskamera für zusätzliche Sicherheit hinzuzufügen. Die nahtlos integrierte UniFi Access-Lösung wird mit der UniFi Access Controller-Software verwaltet. Verwalten Sie Benutzer, Besucher, Zeitpläne und Zugriffsrichtlinien mit der intuitiven browserbasierten Oberfläche. Eigenschaften: Angetrieben von 802.3bt (PoE ++) Switch Drei 802.3af PoE-Ports für UniFi-Lesegeräte und G3 Flex-Überwachungskamera 12-V-Relais und Trockenrelais, die mit den meisten Schlössern kompatibel sind Vier Eingänge für Bewegungssensoren, Request-to-Exit-Geräte und Türpositionsschalter Verwaltet mit UniFi Access Controller in UDM-Pro DIN-Schienenmontage Hinweis: Zum Ausführen von UniFi Access ist UniFi Dream Machine Pro erforderlich
Approximately deliverable on: delivery date unknown
Ein Paket hochsicherer NFC-Karten zur Zugangskontrolle innerhalb von UniFi. Mehrschichtige Verschlüsselung zur Vermeidung böswilliger Duplizierung Benutzern und Besuchern zuordenbar Kompatibilität: UA-G3-Pro-B UA-G3-Pro-W UA-G3-Flex-B UA-G3-Flex-W UA-G2-Pro UA-G2-Pro-black UA-Reader Lite UA-G2 UA-G2-black UA-Ultra UA-Intercom UA-G3-B UA-G3-W
Approximately deliverable on: delivery date unknown
Fail-safe electric strike lock with 8 mm locking slot depth.
Approximately deliverable on: delivery date unknown
Fail-secure electric strike lock that connects to a UniFi Access Hub (UA Hub). Holds up to 1,200 kg (2,645 lb) Can be installed on an aluminum, steel, or wooden door frame ANSI-compliant design Technical Specifications Mechanical Dimensions Lock body: 80 x 40 x 35 mm (3.15 x 1.57 x 1.38") Short front plate: 124 x 32 x 3 mm (4.88 x 1.26 x 0.12") Long front plate: 202 x 36 x 3 mm (7.95 x 1.42 x 0.12") Weight Lock body: 185 g (6.5 oz) Short front plate: 50 g (1.8 oz) Long front plate: 130 g (4.6 oz) Enclosure materials Lock body: zinc alloy Front plate/latches: stainless steel Hardware Voltage 12VDC Current power 400mA ±10% Wiring connection Connect the two screw terminal separately to powered lock relay on UA-Hub: NO, COM Lock type Fail secure lock Single door Lock holding force 1,200 kg (2,645 lb) Suitability Wooden Steel Aluminum Screw terminal + and - Operating temperature -10 to 45° C (14 to 113° F) Operating humidity 5 - 90% noncondensing Certifications FCC, IC, CE
Approximately deliverable on: delivery date unknown
Fail-safe electric door opener lock that is connected to a UniFi Access Hub.
Approximately deliverable on: delivery date unknown
Fail-safe magnetic lock for doors that open inwards and outwards, which is connected to a UniFi Access Hub. Hält up to 270 kg or 540 kg (600-1,200 lb) Can be installed on a wide range of door types* *— Access lock magnetic 270 kg: All types, including full glass — Access lock magnetic 540 kg: All types, excluding full glass Compatibilityät : UA-G2-SK-Pro , UA-G2-SK , EAH-8 , UA-Hub Technical specifications Mechanical Maße UA-Lock-Magnetic-270kg Lock body: 250 x 42.5 x 26 mm (9.8 x 1.7 x 1 inch) Mounting plate: 250 x 25 x 5 mm (9.8 x 1 x 0.2 inches) Anchor: 185.5 x 38.5 x 11 mm (7.3 x 1.5 x 0.4 inches) UA-Lock-Magnetic-540kg Lock body: 266 x 67.5 x 40 mm (10.5 x 2.7 x 1.6 inches) Mounting plate: 266 x 40 x 6 mm (10.5 x 1.6 x 0.2 inches) Anchor: 185 x 61 x 16 mm (7.3 x 2.4 x 0.6 inches) Weight UA-Lock-Magnetic-270kg Lock body: 1 kg (2.2 lb) Mounting plate: 70 g (0.15 lb) Anchor: 600 g (1.3 lb) UA-Lock-Magnetic-540kg Lock body: 2.9 kg (6.4 lb) Mounting plate: 145 g (0.3 lb) Anchor: 1.4 kg (3.1 lb) Features Gerät/Mountings: Aluminium Fitting: steel Hardware Voltage 12 V DC Current energy UA-Lock-Magnetic-270kg: 800mA ±10% UA-Lock-Magnetic-540kg: 500mA ±10% Cable connection Connect the following terminals to the UA hub: Lock 12 V/NC (connect to Power Lock Relay NC on the UA hub) Lock 12 V/COM (connect with Powered Lock Relay COM on the UA hub) DPS/+ (DPS+ on the UA hub) DPS/- (DPS on the UA hub) Lock type Fail-safe lock Single door Holding power UA-Lock-Magnetic-270kg: 270 kg (600 lb) UA-Lock-Magnetic-540kg: 540 kg (1,200 lb) LED Greün: unlocked Red: locked Suitability UA-Lock-Magnetic-270kg: wood/metal/glass UA-Lock-Magnetic-540kg: wood/metal Mounting accessories UA-Lock-Magnetic-270kg L-bracket: door thickness < 42 mm (< 1.7 inches), outward opening door Z-angle: is used with L-angle for doors opening inwards U-angle: is used with glass door UA-Lock-Magnetic-540kg L-bracket: door thickness < 42 mm (< 1.7 inch), door opening outwards Z-angle: is used with L-angle for doors opening inwards Operating ambient temperature -10 to 50 °C (14 to 122 °F) Humidity during operation 5 to 90 % non-condensing Certifications FCC, IC, CE
Approximately deliverable on: delivery date unknown
Fail-safe electric strike lock with 8 mm locking slot depth.
Approximately deliverable on: delivery date unknown