Ubiquiti Unifi Intercom-Viewer / Indoor / Two-way audio / 5" Touch-Display / UA-Intercom-Viewer

Highly secure NFC smart fob that uses multi-layer encryption, including proprietary UniFi Access security protocols. Multi-layer encryption Waterproof, IP54-rated casing (10) UA Pockets per pack   Technical Specifications Mechanical Dimensions 84 x 39 x 7.4 mm (3.3 x 1.5 x 0.29") Weight 16 g (0.56 oz) Enclosure material Polycarbonate, stainless steel, silicone rubber Weatherproofing IP54 Hardware NFC frequency 13.56 MHz NFC technology ISO/IEC 14443 Type A MIFARE DESFire EV3 4K UniFi Access Proprietary Security Protocol Operating temperature -10 to 45° C (14 to 113° F) Operating humidity 10 to 90% noncondensing Certification CE

Second-generation NFC card reader and intercom. Unlock using an NFC card or UniFi Identity mobile app Doorbell for unlock with video of visitor and two-way intercom Video works at ADA-compliant mounting height PIN unlocking on the screen Connects to UniFi Access Hub using PoE IP55 rain resistance (-10 to 45° C)     Technical Specifications Mechanical Dimensions 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") Weight 136 g (4.8 oz) Enclosure material Polycarbonate, glass Mount material Aluminum alloy Mounting Wall, gang box Weatherproofing IP55 Hardware Networking interface (1) 10/100/1,000 MbE RJ45 port Connectivity BLE 4.2 NFC Power method PoE Supported voltage range 48V DC Max. power consumption 6W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensor ToF sensor Camera 4000 x 3000, 12 MP, 30 FPS Microphone Yes Speaker (1) 4 ohm, 1.5W LEDs R/G/B/W Flash Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire Operating temperature -10 to 45° C (14 to 113° F) Operating humidity 5 to 90% noncondensing Certifications CE, FCC, IC Software Management application UniFi Access: Version 1.5.9 and later

Second-generation NFC card reader and intercom. Unlock using an NFC card or UniFi Identity mobile app Doorbell for unlock with video of visitor and two-way intercom Video works at ADA-compliant mounting height PIN unlocking on the screen Connects to UniFi Access Hub using PoE IP55 rain resistance (-10 to 45° C)     Technical Specifications Mechanical Dimensions 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") Weight 136 g (4.8 oz) Enclosure material Polycarbonate, glass Mount material Aluminum alloy Mounting Wall, gang box Weatherproofing IP55 Hardware Networking interface (1) GbE RJ45 port Connectivity BLE 4.2 NFC Power method PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 6W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensor Proximity sensor Camera 4000 x 3000, 12 MP, 30 FPS Microphone Yes Speaker (1) 4 ohm, 1.5W LEDs R/G/B/W Flash Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire Operating environment Outdoor use Operating temperature -10 to 45° C (14 to 113° F) Operating humidity 5 to 90% noncondensing Software information The software version of a product can be checked at https://unifi.ui.com UL 294 level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G2-Pro/UA-G2-Pro-Black, V02 LED System Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware Strobing red: Emergency lockdown Software Management application UniFi Access: Version 1.5.9 and later

UniFi Access Hub UniFi® Access Hub ist ein intelligenter IP-Netzwerk-Single-Door-Controller, der Teil der UniFi Access-Lösung ist. Model: UA-Hub Der UniFi Access Hub verfügt über vielseitige Schnittstellen, einschließlich Unterstützung für die meisten elektrischen Bolzen / Schläge, Magnetschlösser und 12-V-Zugangszubehör wie Bewegungssensoren, Druckknöpfe und Alarme. Die drei mit Ethernet PoE betriebenen Leseschnittstellen minimieren den Verkabelungsaufwand und bieten eine bequeme Möglichkeit, eine UniFi G3-Flex-Überwachungskamera für zusätzliche Sicherheit hinzuzufügen. Die nahtlos integrierte UniFi Access-Lösung wird mit der UniFi Access Controller-Software verwaltet. Verwalten Sie Benutzer, Besucher, Zeitpläne und Zugriffsrichtlinien mit der intuitiven browserbasierten Oberfläche. Eigenschaften: Angetrieben von 802.3bt (PoE ++) Switch Drei 802.3af PoE-Ports für UniFi-Lesegeräte und G3 Flex-Überwachungskamera 12-V-Relais und Trockenrelais, die mit den meisten Schlössern kompatibel sind Vier Eingänge für Bewegungssensoren, Request-to-Exit-Geräte und Türpositionsschalter Verwaltet mit UniFi Access Controller in UDM-Pro DIN-Schienenmontage   Hinweis: Zum Ausführen von UniFi Access ist UniFi Dream Machine Pro erforderlich