Ubiquiti Wireless Device Bridge Pro • AC867 • 2x2 • Outdoor • 1 GbE • PoE+ • UniFi • UDB-Pro
MSRP: €182.07
Approximately deliverable on: delivery date unknown
Product information "Ubiquiti Wireless Device Bridge Pro • AC867 • 2x2 • Outdoor • 1 GbE • PoE+ • UniFi • UDB-Pro"
Connect over a distance of more than 5 km with a point-to-point connection to another Device Bridge Pro or establish a seamless uplink with UniFi WiFi Auto-Link.
(2) GbE ports with (1) PoE output for PoE devices
Power supply via PoE/PoE+*
Mast mounting
Weatherproof (can be used outdoors)
Sold individually
Note: Cannot be set up independently and must be managed by a UniFi console, official UniFi hosting or a self-hosted UniFi network server
*PoE adapter included in the scope of delivery. PoE+ input required for PoE passthrough.
| Mechanical | |
|---|---|
| Maße | Ø189.5 x 64.3 mm (Ø7.4 x 2.5 inches) |
| Weight | Without mount: 431 g (1 lb) With bracket: 515 g (1.1 lb) |
| Walking material | UV-resistant polycarbonate |
| Mounting material | UV-stabilised polycarbonate, stainless steel |
| Diameter of the pole mount | 20–53.1 mm (0.8–2.1") at the tube diameter |
| Wind load | 69 N at 200 km/h (15.5 lbf at 125 mph) |
| Weather resistance | IPX6 |
| Hardware | |
| Network interface | (2) GbE RJ45 ports |
| Management interface | Ethernet- WLAN |
| PoE interface | (1) PoE input (PoE output not used) (1) Passive PoE output |
| Power method | PoE PoE+ (required for PoE output) |
| Power supply | UniFi PoE switch 48 V, 0.32 A PoE adapter (included in the scope of delivery) |
| Supported voltage range | 42.5–57 V direct current |
| Max. Power consumption | 9W |
| Max. Transmission power 2.4 GHz 5 GHz 6 GHz |
– 25 dBm – |
| Max. Data rate 2.4 GHz 5 GHz 6 GHz |
– 867 Mbit/s (BW80) – |
| MIMO 2.4 GHz 5 GHz 6 GHz |
– 2 x 2 – |
| Antenna gain 2.4 GHz 5 GHz 6 GHz |
– 19 dBi – |
| Antenna | Internal |
| Range | 5+ km |
| LEDs | Power supply, Ethernet, (4) signal strength |
| Button | Factory reset |
| Mounting | Pole (included in the scope of delivery) |
| Operating ambient temperature | -40 to 60 °C (-40 to 140 °F) |
| Humidity during operation | 5 to 95 % non-condensing |
| Certifications | CE, FCC, IC |
| Software | |
| WLAN standards | 802.11a/n/ac |
| Wireless security | WPA2 AES (always on) |
| Operating frequency* US/CA Worldwide |
U-NII-1 5150–5250 MHz U-NII-2A 5250–5350 MHz U-NII-2C 5470–5725 MHz U-NII-3 5725–5850 MHz 5150–5875 MHz *Depending on the regulatory region |
| Channel bandwidth | 20/40/80 MHz |
| Max. conducted transmission power | 25 dBm (combined) |
| Modulation | BPSK (½), QPSK (½), QPSK (¾), 16QAM (½), 16QAM (¾), 64QAM (2/3), 64QAM (¾), 64QAM (5/6), 256QAM (¾), 256QAM (5/6) |
Mit UI Care verlängern Sie die Herstellergarantie von 1 Jahr auf insgesamt fünf Jahre und genießen exklusive Vorteile: Vorabaustausch Kostenlose Rücksendung UI Care Lizenz wird von ALLNET aktiviert UI Care-Schutz Ersatz anfordern Ihr Ersatz wird sofort versendet. Sie erhalten den Ersatz innerhalb von 48 Stunden, oft bereits am nächsten Werktag. Geben Sie das Original kostenlos zurück. Bei Ihrem Ersatzteil liegt ein vorfrankiertes Versandetikett bei. Die Lizenz ist ausschließlich für Ubiquiti-Geräte erhältlich, die über ALLNET bezogen wurden. Die Lizenz wird an die Seriennummer des Gerätes gebunden und ist nicht auf andere Geräte übertragbar.
Approximately deliverable on: delivery date unknown
ESD protection for outdoor high-speed networks. Protects outdoor Ethernet devices (2) Passive, surge-protected RJ45 connections Quick and easy installation Compatible with GbE networks Technical Specifications ETH-SP-G2 Dimensions 91 x 61 x 32.5 mm (3.58 x 2.4 x 1.28") Weight 80 g Weatherproofing IPX5 Interface Connections (2) RJ45 Female Connectors ESD/EMP Protection Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs DC Spark-Over Voltage 90V @ 100V/s Maximum Impulse Spark-Over Voltage 700V @ 1kV/µs Discharge Current 10kA+ Maximum Insulation Resistance 1G ohm @ 50V Maximum Capacitance 1.0 pF @ 1 MHz Data Line Protection RJ45 10/100/1000 Ethernet PoE Support Yes Shock and Vibration Certification ETSI300-019-1.4 Standard Operating Temperature -30 to 65° C (-22 to 149° F) Operating Humidity 10 to 90% Noncondensing
Approximately deliverable on: delivery date unknown
Toolless Quick-Mounts for Ubiquiti CPE Products. Quick and easy installation Flexible, easy alignment Compatible with GigaBeam, NanoBeam, NanoStation, NanoStation loco, LTU Lite Technical Specifications Mechanical Dimensions 104 x 122 x 81 mm (4.1 x 4.8 x 3.2") Weight 50.1 g (1.8 oz) Material Plastic, metal
Approximately deliverable on: delivery date unknown