silex technology Wireless Client/Bridge WLAN to LAN Bridge BR-300AN/BR-330AC-LPP zbh. Y-USB-Cable

Description The BR-300AN wireless bridge is used to convert a 10/100/1000BASE-T-compatible wired LAN device into a WLAN-compatible device. The bridge enables wired LAN devices to exchange WLAN data in the 2.4 and 5 GHz bands. The BR-300AN wireless bridge can be integrated into a company's security concept and used, for example, in offices, healthcare facilities and in systems where a secure WLAN is used.Use of mobile devices thanks to the WLAN connection The BR-300AN wireless bridge extends the flexible use of devices, for example in logistics, medicine and industry, as no cables need to be laid. The real-time data exchange promotes labour productivity.Advanced security function The Wireless Bridge BR-300AN supports the security functions in WLAN environments and thus ensures protection against WLAN access by unauthorised persons. The device is equipped with reliable WLAN security functions for companies. - Open(None/64bit/128bit) - Shared(64bit/128bit) - WPA2-PSK(AES) - WPA/WPA2-PSK Mixed(Auto) - WPA2-Enterprise(AES) - WPA/WPA2-Enterprise Mixed(Auto) - 802.1x (EAP-TLS/EAP-TTLS/PEAP/LEAP/EAP-FAST)Function for storing operating logs The memory area of the Wireless Bridge BR-300AN is used to store operating logs over a long period of time. The device responds immediately to disruptions or deterioration of the connection due to changes in the wireless environment.Integrated software for controlling devices The Wireless Bridge BR-300AN is compatible with the optionally available device control software "AMC Manager®". This software allows network administrators to monitor the device status, configure changes, update the firmware and restart the devices for Silex networking products that are connected via a LAN or WLAN.Two operating modes1.Operation with one client - In this operating mode, a device can be connected to a WLAN that is connected to the LAN port of the Wireless Bridge BR-300AN with a LAN cable - The MAC address of the device connected to the LAN port is used for wireless data exchange (MAC transparency) - As soon as the LAN-capable device is connected as a WLAN-compatible device, signals are recognised in the same way as for data exchange via wired networks2.Operation with multiple clients - A maximum of 16 LAN-compatible devices can be connected to the WLAN via a hub - The MAC address of the Wireless Bridge BR-300AN is used for data exchange via the WLANFree setup and use (patented) The Wireless Bridge BR-300AN setup page is accessible without having to change the configuration of the computer used for setup. No complicated procedures are required to set up the Wireless Bridge BR-300AN. Technical data: Product Product type Wireless client / WLAN to LAN bridge Connectivity Standard 802.11a/b/g/n Ports 1 x LAN Performance WLAN speed (up to) 300 Mbit/s General Bridging function WLAN to LAN bridge or also known as WLAN client mode Area of application Indoor Power supply Included power supply unit, optional USB-Y cable for power supply via 2x USB ports Physical properties Antennas Internal Detachable antenna No Execution Execution European

Description The BR-330AC-LP wireless bridge from Silex enables the secure and stable connection of all devices with an Ethernet interface to an existing WLAN infrastructure. It has a particularly low power consumption and is therefore also suitable for areas where energy-saving operation is required. Ideal for medical technology thanks to the intelligent Silex SX-590 module, security features such as 802.1x enterprise security and 802.11r (fast roaming) available, supports MAC address filtering, with dual-band 802.11a/b/g/n/ac 1x1, RMS Power: 2.75W (DC5V, 0.55A), supports Single Client Mode and Multi Client Mode, simple and quick configuration via webpage, Kitting Utility Tool or AMC Manager. Thanks to an optionally available Y-USB power cable (item no. 243356 aka E1414), the wireless bridge can also be supplied with power via existing USB ports on a main system. The BR-330AC-LP consumes up to 45 per cent less power than our BR-300AN and BR-500AC wireless bridge products, extending the possible application range of our wireless bridge product range. In addition, security features such as 802.1x enterprise security and 802.11r (fast roaming) are available for the BR-330AC-LP. Low power consumption The BR-330AC-LP is the Ethernet-to-WLAN bridge for businesses with the lowest power consumption in the industry. The BR-330AC-LP consumes less than 2.5 W (RMS: effective value) when transmitting the wireless signal. The low-power operation enables longer operating time with a high-capacity power bank when the wireless bridge is used with a mobile device. 802.1X Enterprise Security The BR-330AC-LP supports 802.1x authentication to connect to the corporate network via the WLAN network. The BR-330AC-LP is the ideal solution for successful IT/OT convergence with traditional, non-802.1X-capable Ethernet devices. By combining 802.1X authentication over the WLAN through the BR-330AC-LP and its MAC address filtering function for the connected Ethernet device, only authorised Ethernet devices in the OT domain can converge into the IT network. Instead of replacing older Ethernet devices to achieve IT/OT convergence, upgrade the Ethernet devices with the BR-330AC-LP. MAC address filtering The BR-330AC-LP supports MAC address filtering. You can protect your network from physical manipulation by ensuring that only known devices can join your WLAN network via the BR-330AC-LP. If you activate MAC address filtering, only devices that you have activated can be paired with the bridge and the network. Connect single or multiple Ethernet devices to a secure Wi-Fi network The BR-330AC-LP supports two connection topologies, a single client mode and a multi-client mode. The BR-330AC-LP seamlessly connects an Ethernet device to an 802.11ac WLAN in single-client mode. Fast roaming for mobility The BR-330AC-LP supports fast roaming to offer an Ethernet device not only a wireless connection, but also mobility. The BR-330AC-LP is the perfect solution for a medical cart and mobile workstation. Easy configuration for quick installation Configuring the BR-330AC-LP is quick and easy thanks to the integrated configuration website, the initial kitting utility or the AMC Manager®. Even if you need a number of device configurations to install a specific number of BR-330AC-LP, Silex will work with you to fulfil your individual requirements. Technical details: Model number BR-330AC-LP Wired LAN RJ-45 Connector x 1 10Base-T  100Base-TX (Auto-detection) Wireless standard Dual-band 802.11a/b/g/n/ac 1T1R / 1x1 Wi-Fi security Authentication:  WPA2-Enterprise, WPA-Enterprise , WPA2-Personal, WPA-Personal, Open Encryption: WEP, AES, Auto Channels 2.4GHz bands (US) CH1 - CH11 (EU) CH1-CH13 5GHz bands (US) W52, W53, W56*, W58 (EU) W52, W53, W56** W52: 36, 40, 44, 48 W53: 52, 56, 60, 64 W56: 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144 W58: 149, 153, 157, 161, 165 * Channel 120 - 128 is disabled to comply with Canadian regulation. ** Channel 144 is disabled for EU SKU Switch Push switch x 1 LED Power, WLAN, status Storage Temperature Humidity -20 ~ + 70°C 20 ~ 90% RH (non-cndensing) Operating Temperature Humidity 0 ~ + 50°C 20% ~ 80% RH (non-condensing) Power 5-12V DC Jack (EIAJ Class4) optional Y-Cable (Part No: 243355) Power Consumption MS Power: 2.75W (DC5V, 0.55A) Transient Peak Power: 4.25W (DC5V 0.85A) Regulatory Compliance FCC Class B, ICES Class B, CE Class B, VCCI Class B, RoHS Supported software AMC Manager® Dimensions 126×76×24mm (the main body only Weight 255g (main body only) Note Fast roaming is enabled when Wi-Fi authentication is WPA2.