Know what's happening Reacheable via Wifi  Analysing power consumption and supply Measurement value logging with sensors Controlling and shifting Save elictricity   The ALLNET ALL3696 is the evolution result of the successful ALL369x powermeter series. This time for power meters with optical D0 interface. This helps to receive concrete and calibratted measurement values.    Measurement device for capturing and control of your power consumption with several measurement points Reachable everywhere via internet ( internet connection at the location of ALL3696 is needed)  Easy handling and installation via web interface and the optical reading head ALL3688, alternatively ALL3689  Integrated web server Alarm via E-mail if adjusted values are exceeded 4x D0 ports enables the connection with every D0 power meter with optical output (ALL3688/ALL3689)  Extensive consumption displaying with live diagram, chart function, table display Possibility to download the measurement values e.g. as a CSV data Interfaces: 1x network, 1x 300Mbit Wifi, 4x D0, 2x I2C sensor/ports, 2x external USB connections      Technische Daten: Element Spezifikation Interfaces:   2x magnetic connections for inductive transducers 1x50A (included), optional 50A / 200A und 800A available  1x D0 for power meters with optical output compatibility list 1x S0 contact with pulse counter 1x console port Internal data memory:  4GB USB flash memory stick Network connections: 1x RJ45 10/100Mbps 1x 2,4 GHz Wireless N, up to 150 Mbps Network protocols: HTTP/HTTPS, TCP/IP, SNTP, SMTP, SSH Operating systems: all network-compatible operation systems with browser Power supply: 100~240 VAC, 50/60 Hz, external 12V 1A power supply Power consumption: <3 watt maximum Housing: Aluminum housing, possibility of wall mounting Environment: Temperature range: 0 ~ 40 °C Humidity operation: 10% ~ 85% (not condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (not condensed) Labels: CE, RoHS Dimensions: 155 x 28 x 26 mm (lenghtx width x height)  Weight: 260 gramms (without accessories and package) Package content: 1x ALL3696 1x 50A inductive transducers SET "L1/L2/L3" 1x Wifi antenna 1x Ethernet cables 1x power supply 230VAC - 12V DC 1A 2x universal mounting brackets 1x quick install guide

Power Source and Consumption monitoring accessible via LAN/WLAN Analyse Power Consumption and feed Sensors capture measured values ??over controlling and switching save electricity!   The Allnet ALL3692 is the consistent further development of the successful ALL369x Power Meter series, this time for D0 power meter with optical output. This concrete and calibrated readings are always recognized.   Instrument for monitoring and control of your current power consumption at several measuring points Via the Internet from anywhere accessible (Internet connection at the location of ALL3692 required) Easy operation and installation through Web interface and the D0 OKK optical read head ALL3688, alternatively ALL3689 (no interference with the house wiring necessary) integrated web server Email alerting at a set value is exceeded 4 x D0 ports allows you to connect with each D0 power meter with optical output (ALL3688/ALL3689) Extensive consumption display with live chart, chart function, table display, etc. Possibility to download the readings in database format, eg as a CSV file Interfaces: 1 x network, 1x 300Mbit Wireless, D0 4x, 2x I2C sensor / port, 2x External USB ports    Easy installation by placing the OKK optical D0 read head with its magnetic ring on one of the supported meters listed in the compatibility list (Attention! Not listed meters could be made compatible by a software adaptation. It is not necessary to calibrate the ALL3692 using the D0 signals of the calibrated electricity meter. No intervention in the 230V house wiring is necessary.   Features und web interface: The "Speedometer??" Display of our power meter allows you to check live, what you up to date on current consumption each phase and also shows you the recognized current cost of consumption.   The additional sensor ports, you can optionally measured values ??such as Temperature, air pressure, brightness and to define optionally actuators.       The power meter allows you to graphically represent your consumption. You can represent a daily, weekly, monthly or yearly graphs and single-phase or hide. The configuration page of the Power Meter gives you the opportunity to set individual values ??within the device. This includes the cost of power consumption, labels and graph colors.   If you want to reuse or export for archiving the determined values ??of the power meter, you can export it easily via the web menu as CSV or SQL Lite file. The live charts of the device you graphically represents the current power consumption of the device. Here you have the possibility to compare directly single-phase power lines.   Technical Details:   Item Specification Interfaces:   4x D0 for D0-compatible power meter with optical output 2x RJ 45 Ports for sensor and/or actuator 2x USB for external use 1x RS232 System console port Internal Memory: 4GB USB Flash memory stick Network Interface: 1x RJ45 10/100Mbps 1x 2,4 GHz Wireless N, up to300 Mbps network protocols: HTTP/HTTPS, TCP/IP, SNTP, SMTP, SSH operating Systems: all network-capable operating system with a browser Power input: 100~240 V AC, 50/60 Hz, external Power Supply Power consumption: <3 watt (without additional modules, sensors and actuators) Case: Aluminum case with mounting bracket for wall mounting Environment: Temperature operating: 5 ~ 40 °C Humidity operating: 10% ~ 85% (non-condensing) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 95% (non-condensing) Certificates: CE, RoHS Dimension: 155 x 28 x 26 mm (Lenght x Width x Height) Weight: 260 grams (only device) Warranty: 36 months Package content: 1x ALL3692 1x ALL3688 OKK optical D0 readhead 1x Readhead-connection cable 2x WLAN Antennas 1x Ethernetcable 1x Power supply 230VAC - 12V DC 2A 2x universal brackets 1x manual