ALLNET PoE Extender Repeater Outdoor IP67 IEEE802.3BT IN - AT Out, ALL-PR2013Ov2-30W
Product information "ALLNET PoE Extender Repeater Outdoor IP67 IEEE802.3BT IN - AT Out, ALL-PR2013Ov2-30W"
Highlights:
- Outdoor-capable according to IP67 (dustproof & water-protected)
- Extension of PoE networks to up to 300 m
- 1x Gigabit PoE input (IEEE 802.3bt)
- 2x Gigabit PoE output (IEEE 802.3af/at)
- Total power up to 70 watts
- Extended temperature range: -20 °C to +60 °C
- Rugged, compact design for outdoor use
ALL-PR2013O-30W – Outdoor PoE repeater for a range of up to 300 m
The ALL-PR2013O-30W is the ideal solution when PoE connections need to be reliably realised over long distances. As a compact Outdoor PoE Repeater / 2-Port PoE Switch, it extends existing networks by up to 100 metres per device – and thus enables ranges of up to 300 metres.
Thanks to the active signal refresh, the data and power transmission is reprocessed in a stable manner - perfect for demanding outdoor installations without the need for an external power supply.
Typical application scenarios
- Power supply for IP cameras and access points in the outdoor area
- Connection of two IP cameras with only one supply line
- Realisation of emergency or IP telephones outside buildings
- Network connections between buildings or remote areas
Mode of operation
The repeater is powered via IEEE 802.3bt (PoE++) and outputs PoE according to IEEE 802.3af/at with up to 70 watts total power at the outputs. Thanks to the active signal amplification, the classic 100 m Ethernet limit can be reliably extended.
An additional advantage: The outdoor repeater enables the connection of two PoE end devices via just one laid cable, so no additional drilling or second cables are required – ideal for clean and cost-efficient outdoor installations.
Important: A PoE BT (802.3bt) feed is required for operation.
Technical details:
|
Model |
ALL-PR2013O-30W |
|
Standard |
|
|
Port |
PoE in port:1 x 10/100/1000Mbps RJ45 port PoE out port : 2 x 10/100/1000Mbps RJ45 port |
|
Network Media(Cable) |
10BASE-T: UTP category 3,4, 5 cable (=100m) 100BASE-TX: UTP category 5.5e cable (=100m) 1000BASE-TX: UTP category5e cable (=100m) |
|
LED |
LAN |
|
PoE Standard |
IEEE802.3af/at/bt |
|
Dimensions (L*W*H) |
150*73*44MM |
|
RJ45 PoE |
PoE in port: PoE PIN 1/2 = (+) PIN 3/6 = (-) or PIN 4/5 (+) and PIN 7/8 = (-) PoE out port: PINS 1/2 = (+) and PINS 3/6 = (-) |
|
PoE port |
2 |
|
Power Supply |
PoE |
|
PD port input |
95W Max |
|
PoE Power Output |
Per port 48-55V DC Max.30W IEEE802.3at |
|
Operating Temperature |
-20°C ~ 60 °C |
|
Storage Temperature |
-40 °C ~ 80 °C |
|
Operating Humidity |
10% ~ 90% non-condensing |
|
Storage Humidity |
5% ~ 90% non-condensing |
|
Surge Protection |
Differential mode±4KV, Common mode±6KV |
|
MTBF |
>50000 hour |
|
Electrostatic standard |
Contact 6KV,air 8KV |
|
Weather Rating |
IP67 |
|
Vandal Proof |
IK10 |
| Marks | CE |