ALLNET Point-to-Point Coax 8 Port Master Chassis/Amplifier EOC 100 zbh. EOC G.hn flush-mounted box/through box "ALL-GHN108S-100-UP socket
MSRP: €109.16
Available, delivery time: 1-2 Tage
Product information "ALLNET Point-to-Point Coax 8 Port Master Chassis/Amplifier EOC 100 zbh. EOC G.hn flush-mounted box/through box "ALL-GHN108S-100-UP socket"
The EOC 100MHz flush-mounted socket "ALL-GHN108S-100-UP-Dose" is a C-through socket with integrated Gbit LAN interface.
- A coaxial cable is used for simultaneous transmission of DVB-C (108 MHz - 850 MHz) and network data (<108 MHz).
- Internet/network data can be used via the Gbit Ethernet connection.
- The coax socket provides a broadband cable signal (108 MHz to 860 MHz) and can be used with a standard receiver.
- The TV signal is output via the coaxial socket, the network data via the RJ45 socket.
- The networking of the individual flush-mounted boxes/G.hn modules takes place automatically.
- The EOC 100 "ALL-GHN108S-100-UP-socket" can be operated via remote power supply by an ALL-GHN108M-Coax-100 or with a 24V/1A power supply unit.
- 4 subsequent EOC100 "ALL-GHN108S-100-UP-sockets" can be supplied.
- The EOC 100 "ALL-GHN108S-100-UP-socket" can be installed in a single flush-mounted box as well as in a multiple flush-mounted box.
- Each EOC 100 "ALL-GHN108S-100-UP socket" can exchange data with any other flush-mounted socket.
- Wiring/connection of the EOC flush-mounted boxes to the ALL-GHN108M-Coax-100 are described in the.
Recommended application/Use Case:
Building upgrade with Gigabit with existing coaxial cabling and a small budget:
- Home users
- Small company networks
- Hotels
- Hospitals
- Sanatoriums
- Retirement homes
- Renovation of old buildings
Comparison of the Transmission Standard
| Standard | G.Hn via COAX | WLAN | Powerline | DOCSIS 3.0/3.1 over coax |
| Net data rate | 1.5 Gbit | 240 Mbit - Wi-Fi 42 600 Mbit - Wi-Fi 52 800 Mbit - Wi-Fi 62 |
400 Mbit Powerline AV12002 400 Mbit Powerline AV20002 |
1600 Mbit/s download3 240 Mbit/s upload3 |
| Acquisition cost | medium | Wi-Fi4 devices cheap Wi-Fi5 devices medium Wi-Fi6 devices expensive |
AV1200 devices cheap AV2000 devices medium |
high requires DOCSIS - CMTS server |
| Power consumption | up to 4W/Gbit | 6 W/Gbit Access point included |
up to 6 W/Gbit | >8 W/Gbit server included |
| Susceptibility to interference |
not susceptible to | yes, by many users | yes, by electrical consumers | not susceptible to |
| Eavesdropping security | yes | WPA3 yes WPA2 no |
yes | yes |
| Visual impact | small disappears in the wall |
medium router stands around |
large protrudes from the wall socket |
medium modem stands around |
2 Source: https://de.wikipedia.org/wiki/Datendurchsatz
3 Source: https://de.wikipedia.org/wiki/Data_Over_Cable_Service_Interface_Specification
Technische Daten:
- C-throughput in-wall socket
- Can be integrated into single outlets and multiple outlets
- Frequency range 2 – 80 MHz
- Network standard : G.Hn
- Data rate Gross: 1000 Mbps
- Data rate Net: 700 Mbps
- Attenuation 300 – 860 MHz: -2 dB (18db coupling)
- Attenuation 300 – 860 MHz: -3 dB (12db coupling)
- Coupling: 16 dB (other values on request)
- Hardware encryption : AES 128-bit
- Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV
Only suitable for DVB-C wiring
Satellite wiring is not supported
Power Consumption EOC 100
| Datarate net | Power Consumption |
| 50 Mbit/s | 2.06 Watt |
| 100 Mbit/s | 2.27 Watt |
| 200 Mbit/s | 2.47 Watt |
| 300 Mbit/s | 2.68 Watt |
| 400 Mbit/s | 2.81 Watt |
| 500 Mbit/s | 2.90 Watt |
| 750 Mbit/s | 3.05 Watt |

![]()

ALLNET Point-to-Point Coax 8 Port Master Chassis "ALL-GHN108M-Coax" without modules The distribution amplifier ALL-GHN108M-Coax is a highly integrated solution to provide a Gigabit network on 8 coaxial lines. Up to 8 G.hn modems deliver 750 Mbit or 1700 Mbit net per coaxial strand, depending on the model. A built-in power meter simplifies service during and after installation. Without compatibility to a cable network operator, even up to 1700 Mbit is available. Signal strength and skew can be digitally adjusted. If compatibility with a cable network operator is required, 750 Mbit are available. The ALL-GHN108M-Coax takes over all tasks such as filling, amplifying and splitting the TV signals as well as inserting the G.hn network data. Elaborate mounting boards / installations are not necessary. The chassis are available for EOC-Ethernet over COAX with 100MHz modules for DVB-C coexistence and as 200MHz with more bandwidth without DVB-C coexistence. Or explained differently. The EOC 100 and EOC 200 differ as follows: EOC 100 1 Gbit/650 Mbit (gross/net). EOC 200 2 Gbit/1.7 Gbit (gross/net) EOC 100 and EOC 200 - What's behind them ! The EOC 100 uses the frequency band 2-87 MHz for data transmission and can provide the broadband cable signal (DVB-C) from 88 to 860 MHz, so that the cable connection of your provider can still be fully used. The EOC 200 uses a frequency band of 2-199 MHz. Ideal for operators of a head-end station who want to change their frequency allocation. Technical Details: ALL-GHN108M-Coax Gain 33 dB (internal 48dB) Bandwidth 1.2 GHz Ripple 1 dB integrated amplifier 125 dBµV Noise figure 4 dB Ground noise -170 dBm/Hz integrated 8-fold splitter 8 outputs with max. 108 dBµV Return path inhibitor high-pass and low-pass filter internal power meter 50 dbµV to 110 dbµV up to 8 G.hn modules (Part No: 221229 ALL-GHN108-100-Modul) up to 64 subscribers / EOC100 (Part No: 221230 ALL-GHN108S-100-UP-Dose or Part No: 221231 ALL-GHN108S-100-WIFI) Remote power supply 24 V up to 40 EOC100 (Part No: 221230 ALL-GHN108S-100-UP-Dose or Part No: 221231 ALL-GHN108S-100-WIFI) Digital adjustable: 8x 31 dB attenuator (0.5 dB steps) Skew correction (0-3-6-9 dB) Dimensions: 240 x 60 x 60 mm Important: Setting the output power The total band power (approx. 90 transponders) is 19.5 dB higher compared to the output power of a single transponder determined with a measuring device! You must take this into account when making the setting! Example 1 1 transponder: 80.0 dBµV measured 90 transponders: 99.5 dbµV Band power The LED display on the unit shows 99 dBµV. Result: The input signal can (only) be amplified by 10 dB. Example 2 1 transponder: 90.0 dBµV measured 90 transponder: 109.5 dbµV Band power The LED display on the unit shows 109 dBµV. Result: The input signal cannot be amplified any further. Consideration for 5 flush-mounted boxes in the line: Good television reception requires 60 dbµV - 75 dbµV at the input. An EOC 1000/EOC 2000 flush-mounted box has a throughput attenuation of 2-3 dB and an outcoupling attenuation of 18 dB. The AMP X8 delivers a maximum of 110 dbµV per line. After 5 EOC 1000/EOC 2000 flush-mounted boxes connected in series, the total attenuation is: 4x3 dB Continuity attenuation + 18 dB Outcoupling attenuation + 4x1-2 dB Attenuation in coaxial cable = 34-38 dB Total attenuation An optimum setting on the AMP X8 would then be: 60 bµV-65 dbµV + 38 dB = 98-103 dbµV. The output of the first socket would then be 12 dB, i.e. 72 bµV-77 dbµV.
Available, delivery time: 1-2 Tage
Highlights: Frequency range: 2 - 80 MHz Network standard: G.hn Hardware encryption: AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/ Gross data rate: 1000 Mbps max. Net data rate: 700 Mbps max. incl. power supply for the optional EOC sockets 100MHz max. EOC sockets operable per module in chassis The G.hn module is used to expand an existing AMP ALL-GHN108-100 distribution amplifier in conjunction with EOC 100 flush-mounted sockets. Up to eight G.hn modules can be installed per distribution amplifier. Only G.hn modules of the same type (100MHz) can be installed per distribution amplifier. The G.hn plug-in module makes it possible to integrate an additional coaxial strand, which is available with EOC 100MHz flush-mounted sockets, for picking up network data and/or DVB-C signals in the strand. This is also called DVB-C coexistence. ATTENTION: This is only the 100MHz g.hn module, the chassis/amplifier art. 193132 is also required. see accessories.
Available, delivery time: 1-2 Tage
An existing coaxial cable is used for simultaneous transmission of DVB-C and network data. The EOC WLAN flush-mounted socket "ALL-GHN108S-100-WIFI" is a C-through socket with integrated 2.4 GHz WLAN (Wi-Fi 4 2x2 802.11n) and has 2 antennas (2T2R). The coax socket provides a broadband cable signal (108 - 860 MHz) and can be used with a standard receiver. The TV signal is output via the coax socket, the network data via WLAN. The networking of the individual flush-mounted boxes/G.hn modules takes place automatically. The EOC WLAN "ALL-GHN108S-100-WIFI" is operated via remote power supply by a master/amplifier "ALL-GHN108M-Coax-100". It can then power 4 subsequent EOC 100 "ALL-GHN108S-100-UP-Dose" or EOC WIFI ALL-GHN108S-100-WIFI. The EOC WLAN "ALL-GHN108S-100-WIFI" can be installed in a single flush-mounted box or in a multiple flush-mounted box. Each EOC WLAN "ALL-GHN108S-100-WIFI" can exchange data with any other flush-mounted box. Recommended application: Building upgrade with gigabit Ethernet with existing coaxial cabling and on a limited budget. Home users Small company networks Hotels Hospitals Sanatoriums Retirement homes Renovation of old buildings Coax C-throughput in-wall socket Can be integrated into single outlets and multiple outlets Frequency range 2 – 199 MHz Network standard: G.Hn Data rate Gross: 2000 Mbps Data rate Net: 1700 Mbps Attenuation 300 – 860 MHz: -2 dB (16 db coupling) Attenuation 300 – 860 MHz: -3 dB (10 db coupling) Coupling: 10 db or 16 dB Hardware encryption : AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV Remote service: TR-069 remote management (option) Coax C-throughput in-wall socket Can be integrated into single outlets and multiple outlets Frequency range 2 – 199 MHz Network standard: G.Hn Data rate Gross: 2000 Mbps Data rate Net: 1700 Mbps Attenuation 300 – 860 MHz: -2 dB (16 db coupling) Attenuation 300 – 860 MHz: -3 dB (10 db coupling) Coupling: 10 db or 16 dB Hardware encryption : AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV Remote service: TR-069 remote management (option) Only suitable for DVB-C wiring Satellite wiring is not supported Technischen Daten: Software: openWRT 21.02.0 CPU: MIPS24KEc 580 MHz RAM: 64 MB RAM Flash: 32 MB Crypto: AES 128/256 Wi-Fi4: Datenrate 2x 150 Mbit/s (brutto) 2x2 802.11n Freqency: 2.4 GHz Antenna: 2T2R
Available, delivery time: 1-2 Tage
Mean Well power supply GST60A24-P1J DC 24V, 2.5A, 60 Watt Voltage: 90-264VAC, 47~63Hz Größe: 125*50*31,5mm For further details please refer to the data sheet
Available, delivery time: 1-2 Tage
Mean Well Netzteil GST25E24-P1J DC 24V, 1,04A, 25 Watt Voltage: 85-264VAC, 47~63Hz Größe: 79*54*33mm weitere Details bitte dem Datenblatt entnehmen
Available, delivery time: 1-2 Tage
250V/10A,3x0,75mm², PRODUKT INFORMATIONEN: Anschluss Seite A : Schutzkontakt Stecker gewinkelt Anschluss Seite B : IEC-C13 Buchse gerade Kabellänge (m) : 1 Farbe : schwarz Besonderheiten : - Kaltgeräte Buchse gerade und Schutzkontakt Stecker abgewinkelt
Available, delivery time: 1-2 Tage