G.hn Coax

Highlights: Up to 1GbPS G.hn port as home network backbone from one of the existing TV cabling Two 100 / 1000Mbps Gigabit Ethernet ports for FTTH, DSL / cable modem and Ethernet terminals (PC, set-top box, ...) Energy efficiency (grün) Ethernet supportBuilt-in filter to prevent interference with the TV network Indication of the signal quality 2MHZ - 200MHz QoS priority mapping and support VLAN configuration Control IGMP snooping Status and statistics of the Ethernet interface Up to eight devices possible With the G.HN Gigabit Ethernet Bridge ALL-GHN102v2-Coax, you can expand your private network at home with the existing TV cabling. No additional network cabling is required. You can simply use the existing coax cabling in the wall. With the ALL-GHN102v2-Coax, you can quickly expand your network without rewiring and with little effort. Element Specification Network standard: ITU G.9960 G.hn üover Coax IEEE 802.3u 100M Fast Ethernet IEEE802.3ab 1000M Gigabit Ethernet IEEE 802.3az Energy Efficiency Ethernet Connections: Ethernet : Two RJ-45 connectors G.hn : Two coax connectors, one for G.hn,  the other for TV bypass G.hn interface:   Transmission performance and spectrum 100m coax approx. 890 MBit/s net 4.5 +/- 1 dBm @ 2 - 100MHz PHY measured rate: Gigabit Ethernet interface: 100/1000Mbps Auto Negotiation MDI/MDI-X Auto Crossover Quality of Service Priority Mapping Based on IEEE 802.1p Guaranteed G.hn Parameterised QoS Management: GUI, web browser and TR-069 (optional) IPv4 and IPv6 support Queuing Scheme Based on 802.1p/TOS TagVLAN ID Tag/UnTag or Pass Through GMP Snooping Control Statistics and status LED display: "Power” LED G.hn "Link/Activity/Quality” LED Ethernet "Link/Activity” LED x 2 Working environment: Working temperature : 0° ~ 50° (32° ~ 120°) Storage temperature : 10° ~ 65° (14° ~ 149°) Humidity: 10% ~ 95%, non-condensing Power consumption: 4W at 12 volts Environment: Operating temperature: 0°C ~ 50°C (32°F ~ 122°F) Storage temperature: -20°C ~ 70°C (-4°F ~ 150°F) Humidity: 10 to 90% (non-condensing) Mounting:   Wall mounting possible Dimension/weight: Width/depth/height:  130mm x 95mm  x 32mm Weight: 150g (without power supply) Labelling: CE Power supply units are included in the scope of delivery

Highlights: up to 500 Mbps G.hn Port as Homenetwork-Backbone over TV-Wirering Two 100 / 1000Mbps Gigabit Ethernet Ports for Ethernet-Terminals (PC, Set-Top-Box, TV, WiFi-AP´s or other Ethernet-Devices with RJ45-Ethernetport...) Energyefficiency  (green) Ethernet-Support Filter Built-in to Eliminate Noise from TV Signal Indication 6MHZ - 76MHz QoS Priority Mapping Support Tag VLAN Configuration IGMP Snooping Control Status and Statistic up to 15 devices possible With the G.HN Gigabit Ethernet Bridge ALL-GHN102v2-Coax, you can, with the existing TV cabling, expand your home network at home. There is no additional network wiring required. You can simply use the existing coax wiring in the wall. With the ALL-GHN102v2-Coax they can as quickly expand your network without rewiring and with little effort.   Element Specification Network  Standard: ITU G.9960 G.hn over Coaxial Cable Baseband IEEE 802.3u 100M Fast Ethernet IEEE802.3ab 1000M Gigabit Ethernet IEEE 802.3az Energy Efficiency Ethernet Connectors: Ethernet : Two RJ-45 Connectors G.hn: Two F-Type Female Coax Connectors, One for G.hn, the Other for TV G.hn Interface Transmission power and spectrum 100m Coax 350 - 360 MBit/s net 4.5 +/- 1 dBm @ 2 - 200MHz PHY measured rate AES 128 Encryption Gigabit Ethernet Interface 100/1000Mbps Auto Negotiation MDI/MDI-X Auto  Crossover Quality of Service Priority Mapping Based on IEEE 802.1p Guaranteed G.hn Parameterized QoS Management IPv4 and IPv6 Support Queuing Scheme Based on 802.1p/TOS TagVLAN ID Tag/UnTag or Pass Through GMP Snooping Control Statistic and Status LED-Display: “Power” LED G.hn “Link/Activity/Quality” LED Ethernet “Link/Activity” LED x 2 Environmental  Conditions: Operating Temperature : 0° ~ 50° (32° ~ 120°) Storage Temperature –10° ~ 65° (14° ~ 149°) Operating Humidity : 10% ~ 95%, Non-condensing Power Consumption: 4W on 12 Volt Physical  Dimension: 130mm (W) x 95mm (D) x 32mm (H) Marks CE

The EOC 100MHz flush-mounted socket "ALL-GHN108S-100-UP-Dose" is a C-through socket with integrated Gbit LAN interface. A coaxial cable is used for simultaneous transmission of DVB-C (108 MHz - 850 MHz) and network data (<108 MHz). Internet/network data can be used via the Gbit Ethernet connection. The coax socket provides a broadband cable signal (108 MHz to 860 MHz) and can be used with a standard receiver. The TV signal is output via the coaxial socket, the network data via the RJ45 socket. The networking of the individual flush-mounted boxes/G.hn modules takes place automatically. The EOC 100 "ALL-GHN108S-100-UP-socket" can be operated via remote power supply by an ALL-GHN108M-Coax-100 or with a 24V/1A power supply unit. 4 subsequent EOC100 "ALL-GHN108S-100-UP-sockets" can be supplied. The EOC 100 "ALL-GHN108S-100-UP-socket" can be installed in a single flush-mounted box as well as in a multiple flush-mounted box. Each EOC 100 "ALL-GHN108S-100-UP socket" can exchange data with any other flush-mounted socket. Wiring/connection of the EOC flush-mounted boxes to the ALL-GHN108M-Coax-100 are described in the. Recommended application/Use Case: Building upgrade with Gigabit with existing coaxial cabling and a small budget: Home users Small company networks Hotels Hospitals Sanatoriums Retirement homes Renovation of old buildings Comparison of the Transmission Standard Standard G.Hn via COAX WLAN Powerline DOCSIS 3.0/3.1 over coax Net data rate 1.5 Gbit 240 Mbit - Wi-Fi 42 600 Mbit - Wi-Fi 52 800 Mbit - Wi-Fi 62 400 Mbit Powerline AV12002 400 Mbit Powerline AV20002 1600 Mbit/s download3 240 Mbit/s upload3 Acquisition cost medium Wi-Fi4 devices cheap Wi-Fi5 devices medium Wi-Fi6 devices expensive AV1200 devices cheap AV2000 devices medium high requires DOCSIS - CMTS server Power consumption up to 4W/Gbit 6 W/Gbit Access point included up to 6 W/Gbit >8 W/Gbit server included Susceptibility to interference not susceptible to yes, by many users yes, by electrical consumers not susceptible to Eavesdropping security yes WPA3 yes WPA2 no yes yes Visual impact small disappears in the wall medium router stands around large protrudes from the wall socket medium modem stands around 2 Source: https://de.wikipedia.org/wiki/Datendurchsatz 3 Source: https://de.wikipedia.org/wiki/Data_Over_Cable_Service_Interface_Specification Technische Daten:    C-throughput in-wall socket  Can be integrated into single outlets and multiple outlets  Frequency range 2 – 80 MHz  Network standard : G.Hn  Data rate Gross: 1000 Mbps  Data rate Net: 700 Mbps  Attenuation 300 – 860 MHz: -2 dB (18db coupling)  Attenuation 300 – 860 MHz: -3 dB (12db coupling)  Coupling: 16 dB (other values on request)  Hardware encryption : AES 128-bit  Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV   Only suitable for DVB-C wiring Satellite wiring is not supported Power Consumption EOC 100 Datarate net Power Consumption 50 Mbit/s 2.06 Watt 100 Mbit/s 2.27 Watt 200 Mbit/s 2.47 Watt 300 Mbit/s 2.68 Watt 400 Mbit/s 2.81 Watt 500 Mbit/s 2.90 Watt 750 Mbit/s 3.05 Watt    

The EOC 200 (ALL-GHN108S-200-UP-Dose) is an in-wall socket which supports the simultaneous transmission of Internet and Cable TV on an existing coax cable network. The installation of the in-wall socket is adding an internet connection to the existing use of cable TV on the same coax cable. It contains an integrated Gbit LAN interface and a C pass-through socket. Internet/Network data can be utilized via the Gbit Ethernet connection. The coaxial socket provides a broadband cable signal in the range of 240 MHz to 860 MHz. The TV signal gets decoupled via the coaxial socket, whereas network data is transmitted via the RJ45 socket. Interconnection of individual in-wall sockets is done automatically. The first in-wall socket is capable of supplying up to another 5 in-wall sockets. (Part No: 221626 ALL-GHN108S-200-UP-Dose  or Part No: 221627 ALL-GHN108S-200-WIFI)       The EOC 200 can be powered via remote supply by an ALL-GHN108M-Coax-200 (Amplifier), or with a 24 V/1 A power supply. Therefor it can supply four subsequent EOC 200. The EOC 200 can be installed in a single flush-mounted box, as well as in a multiple flush-mounted box. (Part No: 221626 ALL-GHN108S-200-UP-Dose  or Part No: 221627 ALL-GHN108S-200-WIFI)    Each EOC 200 can exchange data with any other flush-mounted box. (Part No: 221626 ALL-GHN108S-200-UP-Dose  or Part No: 221627 ALL-GHN108S-200-WIFI)    Video - Wiring and connection EOC in-wall socket to ALL-GHN108M-Coax-200 Amplifier Recommended application: Building upgrade with Gigabit Ethernet with existing coaxial cabling and limited budget. Home users Small company networks Hotels Hospitals Sanatoriums Retirement homes Renovation of old buildings Comparison of the Transmission Standard Standard G.Hn via COAX WLAN Powerline DOCSIS 3.0/3.1 over coax Net data rate 1,5 Gbit 240 Mbit - Wi-Fi 42 600 Mbit - Wi-Fi 52 800 Mbit - Wi-Fi 62 400 Mbit Powerline AV12002 400 Mbit Powerline AV20002 1600 Mbit/s download3 240 Mbit/s upload3 Acquisition cost medium Wi-Fi4 devices cheap Wi-Fi5 devices medium Wi-Fi6 devices expensive AV1200 devices cheap AV2000 devices medium high requires DOCSIS - CMTS server Power consumption up to 4W/GBit 6 W/GBit Access point included up to 6 W/GBit >8 W/GBit server included Susceptibility to interference not susceptible to yes, by many users yes, by electrical consumers not susceptible to Eavesdropping security yes WPA3 yes WPA2 no yes yes Visual impact small disappears in the wall medium router stands around large protrudes from the wall socket medium modem stands around 2 Source: https://de.wikipedia.org/wiki/Datendurchsatz 3 Source: https://de.wikipedia.org/wiki/Data_Over_Cable_Service_Interface_Specification Technical Details: C-throughput in-wall socket Can be integrated into single outlets and multiple outlets Frequency range 2 – 199 MHz Network standard: G.Hn Data rate Gross: 2000 Mbps Data rate Net: 1700 Mbps Attenuation 300 – 860 MHz: -2 dB (16 db coupling) Attenuation 300 – 860 MHz: -3 dB (10 db coupling) Coupling: 16 dB (other values on request) Hardware encryption : AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV Remote service: TR-069 remote management (option) Only suitable for DVB-C wiring Satellite wiring is not supported   Power Consumption EOC 2000 Power Consumption 50 Mbit/s 2.06 Watt 100 Mbit/s 2.27 Watt 200 Mbit/s 2.47 Watt 300 Mbit/s 2.68 Watt 400 Mbit/s 2.81 Watt 500 Mbit/s 2.90 Watt 800 Mbit/s 3.09 Watt 1000 Mbit/s 3.15 Watt

ALLNET Point-to-Point Coax 8 Port Master Chassis "ALL-GHN108M-Coax" without modules The distribution amplifier ALL-GHN108M-Coax is a highly integrated solution to provide a Gigabit network on 8 coaxial lines. Up to 8 G.hn modems deliver 750 Mbit or 1700 Mbit net per coaxial strand, depending on the model. A built-in power meter simplifies service during and after installation. Without compatibility to a cable network operator, even up to 1700 Mbit is available. Signal strength and skew can be digitally adjusted. If compatibility with a cable network operator is required, 750 Mbit are available. The ALL-GHN108M-Coax takes over all tasks such as filling, amplifying and splitting the TV signals as well as inserting the G.hn network data. Elaborate mounting boards / installations are not necessary. The chassis are available for EOC-Ethernet over COAX with 100MHz modules for DVB-C coexistence and as 200MHz with more bandwidth without DVB-C coexistence. Or explained differently. The EOC 100 and EOC 200 differ as follows: EOC 100 1 Gbit/650 Mbit (gross/net). EOC 200 2 Gbit/1.7 Gbit (gross/net) EOC 100 and EOC 200 - What's behind them ! The EOC 100 uses the frequency band 2-87 MHz for data transmission and can provide the broadband cable signal (DVB-C) from 88 to 860 MHz, so that the cable connection of your provider can still be fully used. The EOC 200 uses a frequency band of 2-199 MHz. Ideal for operators of a head-end station who want to change their frequency allocation. Technical Details: ALL-GHN108M-Coax Gain 33 dB (internal 48dB) Bandwidth 1.2 GHz Ripple 1 dB integrated amplifier 125 dBµV Noise figure 4 dB Ground noise -170 dBm/Hz integrated 8-fold splitter 8 outputs with max. 108 dBµV Return path inhibitor high-pass and low-pass filter internal power meter 50 dbµV to 110 dbµV up to 8 G.hn modules (Part No: 221229 ALL-GHN108-100-Modul) up to 64 subscribers / EOC100 (Part No: 221230 ALL-GHN108S-100-UP-Dose  or Part No: 221231 ALL-GHN108S-100-WIFI) Remote power supply 24 V up to 40 EOC100 (Part No: 221230 ALL-GHN108S-100-UP-Dose  or Part No: 221231 ALL-GHN108S-100-WIFI) Digital adjustable:         8x 31 dB attenuator (0.5 dB steps)         Skew correction (0-3-6-9 dB) Dimensions: 240 x 60 x 60 mm Important: Setting the output power The total band power (approx. 90 transponders) is 19.5 dB higher compared to the output power of a single transponder determined with a measuring device! You must take this into account when making the setting! Example 1 1 transponder: 80.0 dBµV measured 90 transponders: 99.5 dbµV Band power The LED display on the unit shows 99 dBµV. Result: The input signal can (only) be amplified by 10 dB. Example 2 1 transponder: 90.0 dBµV measured 90 transponder: 109.5 dbµV Band power The LED display on the unit shows 109 dBµV. Result: The input signal cannot be amplified any further. Consideration for 5 flush-mounted boxes in the line:     Good television reception requires 60 dbµV - 75 dbµV at the input.     An EOC 1000/EOC 2000 flush-mounted box has a throughput attenuation of 2-3 dB and an outcoupling attenuation of 18 dB.     The AMP X8 delivers a maximum of 110 dbµV per line. After 5 EOC 1000/EOC 2000 flush-mounted boxes connected in series, the total attenuation is: 4x3 dB Continuity attenuation + 18 dB Outcoupling attenuation + 4x1-2 dB Attenuation in coaxial cable = 34-38 dB Total attenuation An optimum setting on the AMP X8 would then be: 60 bµV-65 dbµV + 38 dB = 98-103 dbµV. The output of the first socket would then be 12 dB, i.e. 72 bµV-77 dbµV.

An existing coaxial cable is used for simultaneous transmission of DVB-C and network data. The EOC WLAN flush-mounted socket "ALL-GHN108S-100-WIFI" is a C-through socket with integrated 2.4 GHz WLAN (Wi-Fi 4 2x2 802.11n) and has 2 antennas (2T2R). The coax socket provides a broadband cable signal (108 - 860 MHz) and can be used with a standard receiver. The TV signal is output via the coax socket, the network data via WLAN. The networking of the individual flush-mounted boxes/G.hn modules takes place automatically. The EOC WLAN "ALL-GHN108S-100-WIFI" is operated via remote power supply by a master/amplifier "ALL-GHN108M-Coax-100". It can then power 4 subsequent EOC 100 "ALL-GHN108S-100-UP-Dose" or EOC WIFI ALL-GHN108S-100-WIFI. The EOC WLAN "ALL-GHN108S-100-WIFI" can be installed in a single flush-mounted box or in a multiple flush-mounted box. Each EOC WLAN "ALL-GHN108S-100-WIFI" can exchange data with any other flush-mounted box. Recommended application: Building upgrade with gigabit Ethernet with existing coaxial cabling and on a limited budget. Home users Small company networks Hotels Hospitals Sanatoriums Retirement homes Renovation of old buildings Coax   C-throughput in-wall socket Can be integrated into single outlets and multiple outlets Frequency range 2 – 199 MHz Network standard: G.Hn Data rate Gross: 2000 Mbps Data rate Net: 1700 Mbps Attenuation 300 – 860 MHz: -2 dB (16 db coupling) Attenuation 300 – 860 MHz: -3 dB (10 db coupling) Coupling: 10 db or 16 dB Hardware encryption : AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV Remote service: TR-069 remote management (option)   Coax C-throughput in-wall socket Can be integrated into single outlets and multiple outlets Frequency range 2 – 199 MHz Network standard: G.Hn Data rate Gross: 2000 Mbps Data rate Net: 1700 Mbps Attenuation 300 – 860 MHz: -2 dB (16 db coupling) Attenuation 300 – 860 MHz: -3 dB (10 db coupling) Coupling: 10 db or 16 dB Hardware encryption : AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV Remote service: TR-069 remote management (option) Only suitable for DVB-C wiring Satellite wiring is not supported   Technischen Daten: Software: openWRT 21.02.0 CPU: MIPS24KEc 580 MHz RAM: 64 MB RAM Flash: 32 MB Crypto: AES 128/256 Wi-Fi4: Datenrate 2x 150 Mbit/s (brutto) 2x2 802.11n Freqency: 2.4 GHz Antenna: 2T2R

The EOC WLAN is an in-wall socket which supports the simultaneous transmission of Internet and Cable TV on an existing coax cable network. The EOC WLAN in-wall socket is a "C"able pass-through socket with 2 antennas (2T2R) and integrated 2.4 GHz WiFi (Wi-Fi 4 2x2 802.11n). The coax socket provides a broadband cable signal in the range of 108 - 860 MHz, which can be used with a standard receiver. The TV signal is provided via the TV socket, the network dates are transmitted via WLAN. Interconnection of individual in-wall sockets is done automatically. The EOC WLAN is being powered via remote supply by an ALL-GHN108M-Coax-200  . Therefore, it can supply four subsequent EOC 100 and/or EOC 200 and/or EOC WLAN. The EOC WLAN can be installed in a single flush-mounted box as well as in a multiple flush-mounted box. Each EOC WLAN can exchange data with any other flush-mounted box. Recommended application: Building upgrade with gigabit Ethernet with existing coaxial cabling and on a limited budget. Home users Small company networks Hotels Hospitals Sanatoriums Retirement homes Renovation of old buildings Coax C-throughput in-wall socket Can be integrated into single outlets and multiple outlets Frequency range 2 – 199 MHz Network standard: G.Hn Data rate Gross: 2000 Mbps Data rate Net: 1700 Mbps Attenuation 300 – 860 MHz: -2 dB (16 db coupling) Attenuation 300 – 860 MHz: -3 dB (10 db coupling) Coupling: 10 db or 16 dB Hardware encryption : AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV Remote service: TR-069 remote management (option) Only suitable for DVB-C wiring Satellite wiring is not supported     Technischen Daten: Software: openWRT 21.02.0 CPU: MIPS24KEc 580 MHz RAM: 64 MB RAM Flash: 32 MB Crypto: AES 128/256 Wi-Fi4: Datenrate 2x 150 Mbit/s (brutto) 2x2 802.11n Freqency: 2.4 GHz Antenna: 2T2R

Highlights: Frequency range: 2 - 199 MHz Network standard: G.hn Hardware encryption: AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/ Gross data rate: 2000 Mbps max. Net data rate: 1700 Mbps max. incl. power supply for the optional EOC sockets 200MHz max. EOC sockets can be operated per module in the chassis The G.hn module is used to extend an existing AMP ALL-GHN108-200 distribution amplifier in conjunction with EOC 200 flush-mounted boxes. Up to eight G.hn modules can be installed per distribution amplifier. Only G.hn modules of the same type (200MHz) can be installed per distribution amplifier. The G.hn plug-in module enables an additional coaxial line to be integrated, which is available in the line with EOC 100MHz flush-mounted sockets for picking up network data and/or DVB-C signals. This is also known as DVB-C coexistence. ATTENTION: This is only the 200MHz g.hn module, the chassis/amplifier Art. 221624 is also required. see accessories  

Highlights: Frequency range: 2 - 80 MHz Network standard: G.hn Hardware encryption: AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/ Gross data rate: 1000 Mbps max. Net data rate: 700 Mbps max. incl. power supply for the optional EOC sockets 100MHz max. EOC sockets operable per module in chassis The G.hn module is used to expand an existing AMP ALL-GHN108-100 distribution amplifier in conjunction with EOC 100 flush-mounted sockets. Up to eight G.hn modules can be installed per distribution amplifier. Only G.hn modules of the same type (100MHz) can be installed per distribution amplifier. The G.hn plug-in module makes it possible to integrate an additional coaxial strand, which is available with EOC 100MHz flush-mounted sockets, for picking up network data and/or DVB-C signals in the strand. This is also called DVB-C coexistence. ATTENTION: This is only the 100MHz g.hn module, the chassis/amplifier art. 193132 is also required. see accessories.  

ALLNET Point-to-Point Coax 8 Port Master Chassis "ALL-GHN108M-Coax-200" without modules The distribution amplifier ALL-GHN108M-Coax is a highly integrated solution to provide a Gigabit network on 8 coaxial lines. Up to 8 G.hn modems deliver 750 Mbit or 1700 Mbit net per coaxial strand, depending on the model. A built-in power meter simplifies service during and after installation. Without compatibility to a cable network operator, even up to 1700 Mbit is available. Signal strength and skew can be digitally adjusted. If compatibility with a cable network operator is required, 750 Mbit are available. The ALL-GHN108M-Coax-200 takes care of all tasks such as filling, amplifying and splitting the TV signals as well as inserting the G.hn network data. Elaborate mounting boards / installations are not necessary. The chassis are available for EOC-Ethernet over COAX with 100MHz modules for DVB-C coexistence and as 200MHz with more bandwidth without DVB-C coexistence. Or explained differently. The EOC 100 and EOC 200 differ as follows: EOC 100 1 Gbit/650 Mbit (gross/net) see (Part No. 193132) EOC 200 2 Gbit/1.7 Gbit (gross/net) see (Part No. 221624) EOC 100 and EOC 200 - What's behind them ! The EOC 100 uses the frequency band 2-87 MHz for the transmission of data and can provide the broadband cable signal (DVB-C) from 88 to 860 MHz, so that the cable connection of your provider can still be fully used. The EOC 200 uses a frequency band of 2-199 MHz. Ideal for operators of a headend . Technische Daten ALL-GHN108M-Coax-200 Gain 33 dB (internal 48 dB) Bandwidth 1.5 GHz Ripple 1.5 dB Integrated amplifier 125 dBµV Noise figure 4 dB Noiseflor -170 dBm/Hz Integrated 8-fold splitter 8 outputs with max. 108 dBµV Return channel lock High pass and low pass filter Up to 8 G.hn modules Internal performance meter 50 dbµV to 110 dbµV Up to 64 participants/EOC1700 Remote power supply 24 V up to 40 EOC1700 Digitally adjustable: 8x 31dB attenuator (0.5 dB steps) skew correction (0-3-6-9 dB) Important: setting the output power The total band power (approx. 90 transponders) is 19.5 dB higher compared to the output power of a single transponder determined with a measuring device! You must take this into account when adjusting the total band power.   Example 1 1 transponder: 80.0 dBµV measured 90 transponders: 99.5 dbµV tape power   The LED display on the device shows 99 dBµV. Result: The input signal can be amplified (only) by 10 dB.   Example 2 1 transponder: 90.0 dBµV measured 90 transponders: 109.5 dbµV tape power   The LED display on the device shows 109 dBµV. Result: The input signal cannot be further amplified. Consideration for 5 in-wall sockets in the line: Good TV reception requires 60 dbµV - 75 dbµV at the input. One in-wall socket EOC 1000/EOC 2000 has a transmission loss of 2-3 dB and a decoupling loss of 18 dB. The AMP X8 delivers a maximum of 110 dbµV per strand.   After 5 EOC 1000/EOC 2000 in-wall sockets connected in a row is the total attenuation:   4x3 dB Transmission loss + 18 dB Decoupling attenuation + 4x1-2 dB Attenuation in the coaxial cable = 34-38 dB Total attenuation   Then an optimal setting on the ALL-GHN108M-Coax-200 would be: 60 bµV-65 dbµV + 38 dB = 98-103 dbµV. At the first in-wall socket, 12 dB would then arrive at the output, i.e. 72-77 dbµV.