Switches

ALL4750, ALLNET/D-Link/ZyXEL/Enterasys/Lancom, LC-Connector 1.125G 850 nm Multimode, SFP, 550m range

SFP module 1.25G MM 550m 850nm

Cisco / ALLNET/ D-Link / Lancom, LC connector, For MultiMode 850nm

LC-connection 1.125G 850 nm multimode, SFP, 550m range, industrial -40 -+85degrees, for Allnet/D-link/Netgear/Allied/Lancom/Zyxel/Entersys/ZTE/Planet/Avago/ Microtics/Ubiquiti/Avaya

5-port 10/100/1000Mbit/s Easy webmanaged Gigabit Ethernet Switch with 4x PoE Outputs (802.3af/at) Highlights: 5-port 10/100/1000Mbit/s Gigabit Ethernet Switch support 4x PoE IEEE802.3af/at) (PoE Budget ca. 60W for max. 4 Devices, support max. 30 per Port IEEE802.3at) Easy Smart-Managed Fanless-Design The new ALLNET ALL-SG8245PM switch is a solid foundation for a networked workplace. With a total of 5 backwards-compatible gigabit ports, computers, printers, access points, etc. Can be integrated in your network reliably. The ALL-SG8245PM can also supply power to PoE-enabled devices via its 4 PoE ports (IEEE802.3af), so they do not need an additional power cable. To ensure the for a workplace very important silent operation, the ALL-SG8245PM is equipped with a fanless design. For optimal usage comfort it is “smart managed”. That means it is among other things configurable for VLAN and QoS.   Technical Details: Switch working: Layer 2-Switch, Web easy smart managed Switch-Typ: standalone Standards: IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3az EEE IEEE802.3ad Link Aggregation IEEE802.1q VLAN IEEE802.1p-based QoS Switching-Ports: 5x RJ45 10/100/1000BaseT(X) 4x PoE IEEE802.3at max. 30W per Port Special: 4x PSE Port for PoE Devices Uplink: yes Full Duplex Mode: yes Buffer Memory: 1Mbits Jumbo Frames: 9216byte  MAC adress table: 2K Filtering/Forwarding: Store-and-Forward LED Define: Power/System: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE max power budget (50W) On: Over PoE max power budget (50W) RJ 45 Port: LINK/ACT: bio-color LED Off: port disconnected or link fail Green on: 1000Mbps connected Amber on: 10/100Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on Layer2 Basic:   Port: Auto Negotiation of speed and duplex modes Jumbo frame support Mirror: Port mirroring both on ingress and egress traffic VLAN: 802.1Q VLAN Port-based VLAN LACP: Link Aggregation = IEEE802.3ad Multicast: Blocking of unknown multicast traffic Qos: IEEE802.1p-based QoS Port-based QoS Scheduling Method = WFQ or SP IGMP Snooping: Support IGMPv1 Snooping RFC 1122, RFC4541 Support IGMPv2 Snooping RFC 2236, RFC4541 Support IGMPv3 Snooping(Partial) RFC 3376 Security: STP / Self Loop Support Broadcast Storm Control Support Management: User Interface Web-based Management User Account System password protection PoE: PoE power output On/Off management Power Input: Power-Input: AC to DC external power adapter Input: 100~240V AC Output: 55VDC / 1,3A Housing: Metall/ Desktop PoE Output power capacity: Maximum output :30W per each port 1. Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ 2. Automatically discover the connection of PD device and immediately sends power to it 3. Auto disable port if the port current is over 700mA or short happens 4. Priority default setting is lower port NO. has high priority 5. The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. 6. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable Dimension: 193 x 84 x 26mm Environment: Operating Temperature: 0 ~ 50 °C Operating Humidity: 10% ~ 90% (non condensing) Storage Temperature: -40 ~ 70 °C Operating Humidity: 5% ~ 90% (con condensing) Marks: CE FCC EMI class B, ROHS    

Universal miniGBIC LX module with LC connector for ALLNET/3Com/Cisco/D-Link/ZyXEL/Enterasys/Lancom, 1.125G 1310nm Singlemode, SFP Range: 10 km at 9/125 µm cable

A compact, 5-port, Layer 2 switch that can be powered with PoE or a 5V USB-C adapter. (4) GbE ports (1) GbE PoE input port for power Optional powering with included 5V, 1A USB-C adapter* *Adapter included with single unit purchases. Note. EU version comes with EU power plug only. Technical Specifications Mechanical Dimensions 107.2 x 70.2 x 21.2 mm (4.2 x 2.8 x 0.8") Weight 150 g (5.3 oz) Enclosure material Polycarbonate Hardware Management interface Ethernet In-Band Networking interface (5) GbE RJ45 ports Total non-blocking throughput 5 Gbps Switching capacity 10 Gbps Forwarding rate 7.44 Mpps Power method USB Type C, 5V PoE/PoE+, 44—57V DC, 0.05—0.04A Power supply 5V, 1A power adapter**Only single-unit packages include the 5V, 1A USB-C power adapter. Supported voltage range USB Type C: 4.7—5.3V DC PoE/PoE+: 44—57V DC Max. power consumption 2.5W ESD/EMP protection Air: ± 16kV, contact: ± 12kV Button Factory reset Operating temperature -5 to 45° C (23 to 113° F) Operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC LEDs System Status Ethernet Speed/link/activity Application Requirements UniFi Network Version 5.12.5 and later

LC-connection 1.125G 1310nm singlemode, SFP, 10km range, Industrial -40 -+85degrees, for Allnet/D-link/Netgear/Allied/Lancom/Zyxel/Entersys/ZTE/Planet/Avago/ Microtics/Ubiquiti/Avaya

Cloud Router Switch 328-24P-4S+RM with 800 MHz CPU, 512MB RAM, 24xGigabit LAN (all PoE-out), 4xSFP+ cages, RouterOS L5 or SwitchOS (dual boot), 1U rackmount case, 500W built-in PSU

An 8-port, Layer 2 PoE switch supporting silent fanless cooling. (4) GbE PoE+, (4) GbE ports 52W total PoE availability* Wall mountable *With an external 60W power adapter.       Technical Specifications Mechanical Dimensions 99.6 x 163.7 x 31.7 mm (4 x 6.4 x 1.3") Weight 295 g (10.4 oz) Enclosure material Plastic Hardware Management interface Ethernet In-Band Networking interface (8) GbE RJ45 ports PoE interface (4) PoE/PoE+ (Pins 1, 2+; 3, 6-) Total non-blocking throughput 8 Gbps Switching capacity 16 Gbps Power method 54V DC, 1.1A power adapter Power supply 54V, external, 60W Supported voltage range 50—57V DC Max. power consumption 8W (Excluding PoE output) Total available PoE 52W* *With an external 60W power adapter. Max. PoE wattage per port by PSE PoE+: 30W Button Factory reset Operating temperature -15 to 40° C (5 to 104° F) Operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC LEDs System Status Ethernet PoE Speed/link/activity PoE Link/activity Application Requirements UniFi Network Version 7.2.94 and later

Cloud Router Switch 112-8P-4S-IN with QCA8511 400Mhz CPU, 128MB RAM, 8xGigabit LAN with PoE-out, 4xSFP, RouterOS L5, desktop case, PSU

UniFi Dream Machine Pro UniFi Dream Machine Pro (UDM-Pro) is an all-in-one enterprise network appliance. UDM-Pro integrates all current and future UniFi controllers with a security gateway, 10G SFP + WAN, an 8-port Gbps switch and a standard 3.5-inch hard drive support. Model: UDM-Pro-EU Combines the new UniFi operating system with 8-port switch and security gatewayUniFi Protect Video & Surveillance NVR with commercial 3.5-inch hard drive support 8-port Gigabit switch with 1 Gbit / s RJ45 and 10 G SFP + LAN Enterprise-class IPS / IDS, DPI and Wi-Fi AI functions With fast 1.7 GHz quad-core processor . The best experience for large networks All-in-one 1U rack appliance for small and medium-sized businesses   Seamless network integration Use the UniFi Dream Machine Pro as a network controller Security Gateway The enterprise-class security gateway combines routing, 10 Gbps SFP + WAN, application visibility, VPN services and 3.5 Gbps full throughput for threat management in a single device.   Full-managed switch Fully managed switch with 10 Gbit/s SFP + downlink and eight RJ45 GbE ports Unifi network Integrated network management system for all network elements with user-friendly and modern user interface. Wi-Fi AI automatically optimises the Wi-Fi network . Unifi Protect   Professional video surveillance system and NVR with integrated 3.5"/2.5" HDD slot for scalable storage. Extended redundancy The UDM Pro features two WAN ports with failover and U-LTE1 backup connectivity to ensure reliable access to the Internet. UniFi SmartPower USP-RPS2 provides redundant power in the event of an AC power outage. Technical data: Mechanical Dimensions 442.4 x 43.7 x 285.6 mm (17.4 x 1.7 x 11.2") Weight 3.9 kg (8.6 lb) Enclosure material Aluminium CNC, SGCC steel Mount material SGCC steel Hardware Processor Quad-core ARM® Cortex®-A57 at 1.7 GHz System memory 4 GB DDR4 On-board storage 16 GB eMMC Management interface Ethernet Bluetooth Networking interface LAN: (8) GbE RJ45 ports (1) 10G SFP+ port WAN: (1) GbE RJ45 port (1) 10G SFP+ port IDS/IPS throughput 3.5 Gbps* *Measured with iPerf3 on a DHCP network. Performance may be reduced with PPPoE depending on ISP implementation. Power method (1) Universal AC input, 100—240V AC, 50/60 Hz (1) USP-RPS DC input Power supply AC/DC, internal, 50W Supported voltage range 100—240V AC Max. power consumption 33W ESD/EMP protection Air: ± 15kV, contact: ± 8kV LCM display (1) 1.3" touchscreen Button Factory reset Ambient operating temperature -10° to 40° C (14° to 104° F) Ambient operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Gateway Features Performance Redundant WAN with failover and load balancing WiFi QoS with UniFi APs Application, domain, and country-based QoS Application and device type identification Additional internet failover with LTE Backup Internet quality and outage reporting Next-generation security Application-aware firewall rules Signature-based IPS/IDS threat detection Content, country, domain, and ad filtering VLAN/subnet-based traffic segmentation Full stateful firewall Advanced networking Licence-free SD-WAN WireGuard, L2TP and OpenVPN server OpenVPN client OpenVPN and IPsec site-to-site VPN One-click Teleport and Identity VPN Policy-based WAN and VPN routing DHCP relay Customisable DHCP server IGMP proxy IPv6 ISP support LEDs Ethernet Link/activity Green: 1G Amber: 10/100M SFP+ Link/activity White: 10G Green: 1G HDD White: disc activity Amber: disc error RPS Blue: ready

A 24-port, Layer 2 PoE switch with a fanless cooling system. (16) GbE PoE+, (8) GbE ports (2) 1G SFP ports 95W total PoE availability Fanless, silent cooling         Technical Specifications Mechanical Dimensions 442.4 x 200 x 43.7 mm (17.4 x 7.9 x 1.7") Weight Without mounting brackets: 3 kg (6.6 lb) With mounting brackets: 3.1 kg (6.8 lb) Enclosure material SGCC steel Hardware Management interface Ethernet In-Band Networking interface (24) GbE RJ45 ports (2) 1G SFP ports PoE interface (16) PoE/PoE+ (Pins 1, 2+; 3, 6-) Total non-blocking throughput 26 Gbps Switching capacity 52 Gbps Forwarding rate 38.69 Mpps Power method Universal input, 100—240V AC, 50/60 Hz Power supply AC/DC, internal, 120W Supported voltage range 100—240V AC Max. power consumption 25W (Excluding PoE output) Total available PoE 95W Max. PoE wattage per port by PSE PoE+: 32W Voltage range PoE mode PoE: 44—57V PoE+: 50—57V ESD/EMP protection Air: ± 16kV, contact: ± 12kV LCM display (1) 1.3" touchscreen Button Factory reset Shock and vibration ETSI300-019-1.4 Standard Operating temperature -5 to 40° C (23 to 104° F) Operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC LEDs System Status Ethernet PoE Speed/link/activity SFP Link/activity Application Requirements UniFi Network Version 7.2.94 and later

A 24-port, Layer 3 switch capable of high-power PoE++ output. (16) GbE PoE+, (8) GbE PoE++ ports (2) 10G SFP+ ports 400W total PoE availability DC power backup-ready Layer 3 switching Near-silent cooling         Technical Specifications Mechanical Dimensions 442.4 x 285.4 x 43.7 mm (17.4 x 11.2 x 1.7") Weight Without mounting brackets: 4.3 kg (9.5 lb) With mounting brackets: 4.4 kg (9.7 lb) Enclosure material SGCC steel Hardware Management interface Ethernet In-Band Networking interface (24) GbE RJ45 ports (2) 1/10G SFP+ ports PoE interface (16) PoE/PoE+ (Pins 1, 2+; 3, 6-) (8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-) Total non-blocking throughput 44 Gbps Switching capacity 88 Gbps Forwarding rate 65.472 Mpps Power method Universal input, 100—240V AC, 50/60 Hz USP RPS DC input, 52V DC, 7.69A / 11.5V DC, 2.61A Power supply AC/DC, internal, 450W Supported voltage range 100—240V AC Max. power consumption 50W (Excluding PoE output) Total available PoE 400W Max. PoE wattage per port by PSE PoE+: 32W PoE++: 64W Voltage range PoE mode PoE: 44—57V PoE+: 50—57V ESD/EMP protection Air: ± 16kV, contact: ± 12kV LCM display (1) 1.3" touchscreen Button Factory reset Shock and vibration ETSI300-019-1.4 Standard Operating temperature -5 to 40° C (23 to 104° F) Operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC LEDs System Status Ethernet PoE Speed/link/activity SFP+ Link/activity RPS Status Application Requirements UniFi Network Version 5.10.5 and later

A 48-port, Layer 3 switch capable of high-power PoE++ output. (40) GbE PoE+, (8) GbE PoE++ ports (4) 10G SFP+ ports 600W total PoE availability DC Power backup ready Layer 3 switching Near-silent cooling       Technical Specifications Mechanical Dimensions 442.4 x 399.6 x 43.7 mm (17.4 x 15.7 x 1.7") Weight Without mounting brackets: 6.2 kg (13.8 lb) With mounting brackets: 6.3 kg (14 lb) Enclosure material SGCC steel Hardware Management interface Ethernet In-Band Networking interface (48) GbE RJ45 ports (4) 1/10G SFP+ ports PoE interface (40) PoE/PoE+ (Pins 1, 2+; 3, 6-) (8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-) Total non-blocking throughput 88 Gbps Switching capacity 176 Gbps Forwarding rate 130.944 Mpps Power method Universal input, 100—240V AC, 50/60 Hz USP RPS DC input, 52V DC, 11.54A / 11.5V DC, 5.22A Power supply AC/DC, internal, 660W Supported voltage range 100—240V AC Max. power consumption 60W (Excluding PoE output) Total available PoE 600W Max. PoE wattage per port by PSE PoE+: 32W PoE++: 64W Voltage range PoE mode PoE: 44—57V PoE+: 50—57V ESD/EMP protection Air: ± 16kV, contact: ± 12kV LCM display (1) 1.3" touchscreen Button Factory reset Shock and vibration ETSI300-019-1.4 Standard Operating temperature -5 to 40° C (23 to 104° F) Operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC LEDs System Status Ethernet PoE Speed/link/activity SFP+ Link/activity RPS Status Application Requirements UniFi Network Version 5.10.5 and later  

Flexible 5-port, Layer 2 PoE switch for indoor and outdoor use, that can be powered with PoE++ (4) GbE PoE+ ports (1) GbE PoE++ input port for power — 46W PoE availability* PoE++ input — 20W PoE availability* PoE+ input — 8W PoE availability* PoE input Indoor/Outdoor *When powered with a PoE++ switch or a 60W PoE adapter (sold separately).       Technical Specifications Mechanical Dimensions 122.5 x 107.1 x 28 mm (4.8 x 4.2 x 1.1") Weight 230 g (8.11 oz) Hardware Management interface Ethernet In-Band Networking interface (5) GbE RJ45 ports PoE interface (4) PoE+ (Pins 1, 2+; 3, 6-) Total non-blocking throughput 5 Gbps Power method PoE++ Power supply PoE/PoE+ (Pins 1, 2+; 3, 6-) PoE++ (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-) 50V/60W PoE adapter (Not included) Supported voltage range PoE: 44—57V DC PoE+/PoE++: 50—57V DC Max. power consumption 5W (Excluding PoE output) Total available PoE 46W* *When powered with a PoE++ switch or a 60W PoE adapter(sold separately). Max. PoE wattage per port by PSE 25W Voltage range PoE mode 44—57V Voltage range PoE+ mode 50—57V ESD/EMP protection Air/contact: ± 16kV Button Factory reset Operating temperature 46W PoE output: -40 to 55° C (-40 to 131° F) 25W PoE output: -40 to 65° C (-40 to 149° F) Operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC LEDs System Status Ethernet PoE Speed/link/activity PoE Link/activity Application Requirements UniFi Network Version 5.10.3 and later

Mini GBIC, Fiber LC, für HP-Serien, Commercial 0-+70Grad, 850nm Multimode,

Multi-mode, duplex, fiber transceiver module. 10 Gbps throughput Duplex LC connector Supports connections up to 300 m* *Fiber cable is not included.   Technical Specifications UACC-OM-MM-10G-D Supported Media Multi-Mode Fiber Connector Type (2) LC TX Wavelength Black Latch: 850 nm RX Wavelength Black Latch: 850 nm Data Rate 10 Gbps Max. Power Consumption 0.8W Cable Distance 300 m Operating Temperature 0 to 70° C (32 to 158° F) Pack Options 2-pack, 20-pack WARNING CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014 – Do not look into the ends of the fiber optic cable or SFP module while converters are powered.

Nano-thin patch cable with a translucent boot designed to show Etherlighting™ effects when connected to Pro Max switching. Translucent booted RJ45 for optimal Etherlighting™ brightness Outer diameter: 2.5 mm Length: 0.15 m     Technical Specifications Specifications Cable length 0.15 m (5.9") (from end-to-end) Cable color White Jacket diameter 2.5 mm (0.1") Cable type Category 6 Connector (2) Translucent booted RJ45 Enviroment Indoor Standards TIA-568-B.2 Flam rating VW-1 (UL1581) Pack type Single unit 24-pack

Cloud Router Switch 326-24G-2S+RM with 800 MHz CPU, 512MB RAM, 24xGigabit LAN, 2xSFP+ cages, RouterOS L5 or SwitchOS (dual boot), 1U rackmount case, PSU

8-port 10/100/1000Mbit/s PoE Layer 2 Gigabit Ethernet Switch (4x 802.3af oder 2x 802.3at) Highlights: 8-Port 10/100/1000Mbit/s with 4x Ports  PoE AF or 2x PoE AT (30W) PoE performance 2x 30 Watt (IEEE802.3at) oor 4x 15,4 Watt (IEEE802.3af)internal power supplyfanless design      The ALL8804PoE+ provides high power and data using Power over Ethernet (PoE) over Cat-5 cable. The Eight Gigabit Ethernet ports can be used for any 10/100/1000 Mbps link and four of these ports can supply industry-standard IEEE 802.3af and two ports can supply IEEE 802.3at power.  ALL8804PoE+ delivers PoE to any small business network that wants to simplify the installation of IP-Phone and IP-based surveillance cameras.     Technical Details:  Standard ComplianceIEEE 802.3 10BaseTIEEE 802.3u 100BaseTXIEEE 802.ab 1000BaseTIEEE 802.3af PoEIEEE 802.3at PoEIEEE 802.3x Flow Control and Back-pressureIEEE 802.1p Class of ServiceSwitch FeaturesRJ-45 Ports: 8x 10/100/1000 MbpsMAC Address: 8KBuffer Memory: 2048K BytesJumbo Frames: 9.6KTransmission Method: Store and ForwardManagementN/APower100~240V/AC, 50~60HzPower consumption (without PoE)Max. 5 WattPower consumption (with PoE)Max. 65 WattCaseMetal housing 265 × 184 × 44 mm (W x D x H)Weight0.95 kgOperating temperature0 to 40°CStorage temperature-20 to 90°CHumidity10 to 90% (non-condensing)CertificatesFCC Class A, CE 

Highlights: Plug and play, easy to install. Transmission Distance up to 100Meters, speed up to 1,000 Mbps. Power Consumption 85% Reduction Complies with IEEE802.3, IEEE802.3u standards. 5 10/100/1000Mbps Auto-Negotiation RJ45 ports, Add up to five devices to a local network. Supporting Auto-MDI/MDIX. Supports IEEE802.3x flow control for Full Duplex mode and backpressure for half-duplex mode. Supports MAC address auto-learning and auto-aging. LED indicators for monitoring power, link, activity. Metal Case, Durable, Compact Design Accelerate the performance of your local wired network with the 5-Port Business Desktop Gigabit Switch. It is offering five gigabit Ethernet auto-sensing ports with wired connection speeds of up to 1,000 Mbps, this unmanaged switch lets your home or office to expand its local network and send large files to servers, drives, and printers at gigabit speed. With plug-and-play convenience and auto-sensing ports that automatically optimize speed for each connected device, offers a quick and easy solution for extending your office or home network. Technical Details: Model No. ALL-SG8005 Interface 5x 10/100/1000/Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Chip EN8850 Switching Capacity 10 Gbps Housing Metal Case Power Input External Power adapter 5V DC/1A. LED Power, 10/100M,1000M, LINK, ACT Fan Fanless Transfer Method Store and forward Dimension Product Size: 84*48*25.6mm. Box Size: 85*52*70mm Weight Product Weight: 111g. Product with Box Weight: 198g Advanced Functions Green Technology, saving power up to 85% 802.3X Flow Control Back Pressure Auto-Uplink Every Port Environment Operating Temperature: 0°C ~ 40°C (32°F~104°F) Storage Temperature: -20°C ~ 70°C (-4°F~158°F) Operating Humidity: 10%~90% non-condensing. Storage Humidity: 5%~90% non-condensing Package Contents 5-Port 10/100/1000Mbps Unmanaged Desktop Switch Power Adapter

Nanodynes patch cable with 2.5 GbE support for displaying Etherlighting™effects. Translucent RJ45 with boot for optimum Etherlighting™-brightness — 2.5 mm outer diameter for lengths of 0.15–8 m — 2.9 mm outer diameter for lengths of 12–15 m Length: 0.15 to 15 m Cable length 0.15, 0.3, 1, 2, 3, 5, 8, 12, 15 m (from end to end) (0.5, 1, 3.3, 6.6, 9.8, 16.4, 26.2, 39.8, 49.2 ftß) Cable colour White Sheath diameter 0.15–8 m: 2.5 mm (0.1 inch) 12–15 m: 2.9 mm (0.11 inch) Cable type Category 6 Connector (2) RJ45 with transparent plug Supported data rate Up to 2.5 GbE Supported PoE type PoE++ Environment Interior Standards TIA-568-B.2 Flame resistance VW-1 (UL1581) Type of packaging Single unit Pack of 24 (0.15 m)

Highlights: 24 Port Gigabit non-blocking Switch Architektur Supports NWay Protocoll for Networkspeed (10/100/1000Mbps) and Duplexmodus (half/full) auto-detection Supports back-pressure (half duplex), flow control (IEEE 802.3x und IEEE 802.3az Energy Efficient Ethernet VLAN "64 Static / Port-Based / Tagged Based Link Aggregation ( IEEE802.3ad LACP & Static Trunk) IGMP Snooping (v1/v2/v3) QoS (Port Based, Flow, 802.1p, IP-TOS, IP DSCP) Stormcontrol (Broadcast, Multicast, Unicast) Fanless (19"Rackmount) or Wall/Desk mounting possible   Introduction: The new ALLNET ALL-SG8428M switch provides an ideal basis for small and medium workgroups with high network and data traffic and enables rapid data transmission in Netzwerk.Mit total of 16 backward-compatible Gigabit ports + 4x MiniGBIC Slots are the connected computers and servers reliability and performance linked. By The fanless design of the ALL-SG8428M is also ideal in office environments only, since no disturbing noises are generated. The switch is smart manageable and thus supports all necessary standards such as QoS, VLAN, storm control and IGMP Snooping. This ensures the highest performance and reliability in their network. The robust metal housing is suitable for mounting in a 19 "cabinet, as well as for wall mounting. 4 Combo SFP Open Slots ALL-SG8428M supports 4 Combo SFP open slots to uplink to servers, storage, or other switching devices for long loop reach applications. High-Speed Networking and Jumbo Frames Support ALL-SG8428M provides an excellent solution for expanding your Gigabit network. By Gigabit speed, this product provides high flexibility and high bandwidth connectivity to servers, workstations and other attached devices. It enables you to save time transferring large files. In addition, it also supports Jumbo Frames 10K to improve network utilization of large file transfers. Exceptionally Smart The ALL-SG8428M features management interface that can be managed through Web Browser and it provides Smart features that are ideal for network applications and basic monitoring tools to improve network efficiency. Through a Web-based interface, an administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical data, RSTP to avoid network loop, link aggregation to create fat traffic pipelines, bandwidth control to limit traffic load and IEEE 802.1X to secure port access on your network. All of these features offer extra protection on the network edge. Technical Details: Element Specification Standards IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE802.ab 1000BaseT IEEE802.3ad Link Aggregation IEEE802.1ab Link Discovery Protocol (LLDP) IEEE802.3x full-duplex operation and flow control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p class of service, priority protocols IEEE802.1Q VLAN Tagged Based IEEE802.1d Spanning Tree (STP) IEEE802.1w Spanning Tree (RSTP) Features 24x RJ45 10/100/1000BaseT(X) 4x SFP miniGbics Slots MAC Address: 8K Buffer Memory: 524,8 Kb Jumbo Frames: 10 KB Transmission Method: Store and Forward Layer2 Functions Flow Control (Full-Duplex & Half-Duplex) Spanning Tree (IEEE802.1d STP & IEEE802.1w RSTP, Auto Edge Port, Self Loop Detection) VLAN (64 Statis VLAN, Port-based, IEEE802.1q Tagged-based) Voice VLAN (OUI Mode) Link Aggregation (IEEE802.3ad LACP, Static Trunk, 8x max Gruppen, 8 Ports/Gruppen, Traffic Load Balancing) IGMP Snooping (256 Multicast Gruppen, IGMP v1/v2/v3 IEEE802.1ab Link Layer Discovery Protokoll (LLDP) Filtering/Forwarding Rates 1000Mbps port – 1,488,000pps 100Mbps port - 148,800pps, 10Mbps port - 14,880pps Transmission Media 10BaseT Cat. 3, 4, 5 UTP/STP, 100BaseTX Cat. 5 UTP/STP 1000BaseT Cat. 5E UTP/STP Housing: 19"Metallhousing, Mounting angle enclosed QoS Features: 8 Priority Queue Rate Limit (Port Based Ingress/Egress) Queue Scheduling (WRR, WFQ, Strict Priority, Hybrid) Class of Service (Port-based, Flow-based, 802.1p, IP Tos, IP DSCP) Security: Storm Control (Broadcast, Unknown Multicast, Unknown Unicast) HTTPS und SSL 2.0 Account Manager (Multiple Account, Multi-Level Security) Management VLAN, Port-Isolation DoS Prevention IPv6: IPv6 Application (HTTP/HTTPS, TELNET, SNMP, TFTP, PING, PHCPv6) IPv6 Host (Static Adress Length, Default Gateway, Neighbor Discovery (ND), Duplicate Adress Detection, ICMPv6) Management: Web-GUI (HTTP,HTTPS) Command Line Interface CLI (Console, RFC854 über DB-9 Seriell) SNMP (v1/v2) File Managment (Firmware Upgrade, Configuration Download DHCP Client DNS Client Mirroring (Port-based (many to one) Syslog (RFC3164, LocalRAM, Local Flash, Remote Server) Time Setting (Local, SNTP) Cable Diagnostics (Cable Test) Port Utiliation Reset Button EEE (802.3az) Led Indicators: Per Port: Link/Act; Per Unit: Power Power Input: 100~240V/AC, 50~60Hz Power Consumption: 15 Watts (Max) Dimensions: 216 x 133 x 42 mm (H x W x D) Weight: 4.7 kg Operating Temperature: 0 ~ 55 °C Storage Temperature: -20 to 90° Humidity: 10 to 90% RH (non-condensing) Marks: EMC/FCC, CE Class B; Safety/LVD EN60950-1