Switches - PoE (Power over Ethernet)

5-port 10/100/1000Mbit/s Easy webmanaged Gigabit Ethernet Switch with 4x PoE Outputs (802.3af/at) Highlights: 5-port 10/100/1000Mbit/s Gigabit Ethernet Switch support 4x PoE IEEE802.3af/at) (PoE Budget ca. 60W for max. 4 Devices, support max. 30 per Port IEEE802.3at) Easy Smart-Managed Fanless-Design The new ALLNET ALL-SG8245PM switch is a solid foundation for a networked workplace. With a total of 5 backwards-compatible gigabit ports, computers, printers, access points, etc. Can be integrated in your network reliably. The ALL-SG8245PM can also supply power to PoE-enabled devices via its 4 PoE ports (IEEE802.3af), so they do not need an additional power cable. To ensure the for a workplace very important silent operation, the ALL-SG8245PM is equipped with a fanless design. For optimal usage comfort it is “smart managed”. That means it is among other things configurable for VLAN and QoS.   Technical Details: Switch working: Layer 2-Switch, Web easy smart managed Switch-Typ: standalone Standards: IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3az EEE IEEE802.3ad Link Aggregation IEEE802.1q VLAN IEEE802.1p-based QoS Switching-Ports: 5x RJ45 10/100/1000BaseT(X) 4x PoE IEEE802.3at max. 30W per Port Special: 4x PSE Port for PoE Devices Uplink: yes Full Duplex Mode: yes Buffer Memory: 1Mbits Jumbo Frames: 9216byte  MAC adress table: 2K Filtering/Forwarding: Store-and-Forward LED Define: Power/System: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE max power budget (50W) On: Over PoE max power budget (50W) RJ 45 Port: LINK/ACT: bio-color LED Off: port disconnected or link fail Green on: 1000Mbps connected Amber on: 10/100Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on Layer2 Basic:   Port: Auto Negotiation of speed and duplex modes Jumbo frame support Mirror: Port mirroring both on ingress and egress traffic VLAN: 802.1Q VLAN Port-based VLAN LACP: Link Aggregation = IEEE802.3ad Multicast: Blocking of unknown multicast traffic Qos: IEEE802.1p-based QoS Port-based QoS Scheduling Method = WFQ or SP IGMP Snooping: Support IGMPv1 Snooping RFC 1122, RFC4541 Support IGMPv2 Snooping RFC 2236, RFC4541 Support IGMPv3 Snooping(Partial) RFC 3376 Security: STP / Self Loop Support Broadcast Storm Control Support Management: User Interface Web-based Management User Account System password protection PoE: PoE power output On/Off management Power Input: Power-Input: AC to DC external power adapter Input: 100~240V AC Output: 55VDC / 1,3A Housing: Metall/ Desktop PoE Output power capacity: Maximum output :30W per each port 1. Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ 2. Automatically discover the connection of PD device and immediately sends power to it 3. Auto disable port if the port current is over 700mA or short happens 4. Priority default setting is lower port NO. has high priority 5. The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. 6. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable Dimension: 193 x 84 x 26mm Environment: Operating Temperature: 0 ~ 50 °C Operating Humidity: 10% ~ 90% (non condensing) Storage Temperature: -40 ~ 70 °C Operating Humidity: 5% ~ 90% (con condensing) Marks: CE FCC EMI class B, ROHS    

A 24-port, Layer 2 PoE switch with a fanless cooling system. (16) GbE PoE+, (8) GbE ports (2) 1G SFP ports 95W total PoE availability Fanless, silent cooling         Technical Specifications Mechanical Dimensions 442.4 x 200 x 43.7 mm (17.4 x 7.9 x 1.7") Weight Without mounting brackets: 3 kg (6.6 lb) With mounting brackets: 3.1 kg (6.8 lb) Enclosure material SGCC steel Hardware Management interface Ethernet In-Band Networking interface (24) GbE RJ45 ports (2) 1G SFP ports PoE interface (16) PoE/PoE+ (Pins 1, 2+; 3, 6-) Total non-blocking throughput 26 Gbps Switching capacity 52 Gbps Forwarding rate 38.69 Mpps Power method Universal input, 100—240V AC, 50/60 Hz Power supply AC/DC, internal, 120W Supported voltage range 100—240V AC Max. power consumption 25W (Excluding PoE output) Total available PoE 95W Max. PoE wattage per port by PSE PoE+: 32W Voltage range PoE mode PoE: 44—57V PoE+: 50—57V ESD/EMP protection Air: ± 16kV, contact: ± 12kV LCM display (1) 1.3" touchscreen Button Factory reset Shock and vibration ETSI300-019-1.4 Standard Operating temperature -5 to 40° C (23 to 104° F) Operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC LEDs System Status Ethernet PoE Speed/link/activity SFP Link/activity Application Requirements UniFi Network Version 7.2.94 and later

8-port 10/100/1000Mbit/s PoE Layer 2 Gigabit Ethernet Switch (4x 802.3af oder 2x 802.3at) Highlights: 8-Port 10/100/1000Mbit/s with 4x Ports  PoE AF or 2x PoE AT (30W) PoE performance 2x 30 Watt (IEEE802.3at) oor 4x 15,4 Watt (IEEE802.3af)internal power supplyfanless design      The ALL8804PoE+ provides high power and data using Power over Ethernet (PoE) over Cat-5 cable. The Eight Gigabit Ethernet ports can be used for any 10/100/1000 Mbps link and four of these ports can supply industry-standard IEEE 802.3af and two ports can supply IEEE 802.3at power.  ALL8804PoE+ delivers PoE to any small business network that wants to simplify the installation of IP-Phone and IP-based surveillance cameras.     Technical Details:  Standard ComplianceIEEE 802.3 10BaseTIEEE 802.3u 100BaseTXIEEE 802.ab 1000BaseTIEEE 802.3af PoEIEEE 802.3at PoEIEEE 802.3x Flow Control and Back-pressureIEEE 802.1p Class of ServiceSwitch FeaturesRJ-45 Ports: 8x 10/100/1000 MbpsMAC Address: 8KBuffer Memory: 2048K BytesJumbo Frames: 9.6KTransmission Method: Store and ForwardManagementN/APower100~240V/AC, 50~60HzPower consumption (without PoE)Max. 5 WattPower consumption (with PoE)Max. 65 WattCaseMetal housing 265 × 184 × 44 mm (W x D x H)Weight0.95 kgOperating temperature0 to 40°CStorage temperature-20 to 90°CHumidity10 to 90% (non-condensing)CertificatesFCC Class A, CE 

USW-16-POE Gen2 Der USW-16-POE ist ein konfigurierbarer Gigabit-Layer-2-Switch mit 16 Gigabit-Ethernet-Ports, darunter acht 802.3at PoE + -Ports mit automatischer Erkennung und zwei SFP-Ports.Die gesamte  PoE-Leistung beträgt 42 Watt. Model: USW-16-POE Es bietet Gigabit-PoE-Verbindungen zu Ihren RJ45-Ethernet-Geräten und Gigabit-Glasfaser-Uplink-Optionen zu Ihrem Unternehmensnetzwerk. Er verfügt über ein 1,3-Zoll-Touch-LCM für Statusinformationen. Mit einer Tiefe von 7,9 Zoll kann das kompakte lüfterlose Design problemlos in einem SOHO-Rack-Schrank installiert werden. Der USW-16-POE wird vom UniFi Network Controller mit Unterstützung für UniFi-Mobilanwendungen verwaltet und konfiguriert und bietet eine umfangreiche Suite fortschrittlicher Layer 2-Switching-Protokolle und -Funktionen, einschließlich des Betriebsmodus (Switching, Mirroring oder Aggregate) pro Port. Mit dem UniFi Network Controller und der mobilen App können Administratoren praktisch alle Switch-Funktionen in einer grafischen Benutzeroberfläche von überall aus konfigurieren und überwachen. Works with UniFi Network Controller Der Switch wird vom UniFi Network Controller verwaltet und konfiguriert. Der UniFi Network Controller und die mobile App ermöglichen es Administratoren, praktisch alle Switch-Funktionen in einer grafischen Benutzeroberfläche von überall her zu konfigurieren und zu überwachen.   Features: (1) 1.3" LCM color touchscreen with AR switch management (8) GbE, 802.3at PoE+ RJ45 ports (8) GbE RJ45 ports (2) 1G SFP ports 42W total PoE supply Fanless, silent cooling   Technische Daten:    

ALLNET Switch unmanaged 5 Port - 5x GbE - PoE Budget 85W - 4x PoE af/at out 1xPoE bt 90W in - Fanless, DIN, PD-Input - ALL-SG8005PD-BT90 Highlights: Compact switch for DIN rail 5x 10/100/1000M copper ports of which port 2 max. 60W, port 3-5 PoE output ports max. 30W per port, port 1 = PoE PD BT 90W input Compact PoE switch with PD input and PoE outputs for DIN rail  Port 1 PoE output with max. 90W PoE according to IEEE802.3bt - Port 2-5 PoE output with max. 30W according to IEEE802.3af/at - Port 5 PoE PD input Power supply via PoE network, no AC or DC power supply required, supports standard PoE bt, input max 90 W, PoE voltage 44-57 VDC PoE Pin: Input: 1/2 (+), 3/6 (-), 4/5 (+), 7/8(-); Output: 1/2 (+), 3/6 (-) Compact design: L+W+H = 82 x 52 x 23mm Cascading of max. 4 switches possible (no POE left for devices) One Touch VLAN function can be activated via switch. The ALLNET ALL-SG8005PD Gigabit PoE+ Extender/Switch is a compact, high-performance device harnessing the latest network standards to extend your Ethernet signal up to 100 meters per device. With the capability to reach a total range of up to 500 meters, this extender offers flexibility and versatility. Operating via Power over Ethernet (PoE), this amplifier eliminates the need for a separate power supply. This feature allows its deployment in locations without existing power cables or outlets, expanding range or connectivity effortlessly. The 4 PoE ports provide a maximum budget of 85W PoE power. Port 2 delivers up to 60W, while ports 3-5 can supply a maximum of 30W per port. Furthermore, ports 2-5 support both PoE and non-PoE compatible devices, ensuring flexible utilization. This solution is ideal for ensuring a reliable network connection in cabinets or electrical enclosures. The additional ports can accommodate IoT devices or other smart home endpoints, further enhancing the versatility and applications of this extender. The switch offers the option to toggle between two operating modes via a switch: OFF-Normal mode or ON-VLAN & 250M PoE. In VLAN & 250m PoE mode, devices cannot communicate with each other, also known as Port Isolation. Moreover, the network range for 100Mbps devices extends to a maximum of 250m, while Gigabit devices maintain a range of 100m." Technical Details: Technical Details: Modell ALL-SG8005PD-BT90   Product name ALLNET 5 Port PoE Extender Network transmission medium 10Base-T : Cat5e or above UTP(=100m) 100Base-TX : Cat,5e or above UTP(=100m) 1000Base-TX : Cat,5e or above UTP(=100m) Ethernet 4*10/100/1000Mbps PoE Port PoE Output 1*10/100/1000Mbps Ethernet Port Input Transmission distance Bis zu 100m pro Extender Network protocol IEEE802.3 IEEE802.3u IEEE802.3x PoE protocol IEEE802.3bt (90) Input Port 1 IEEE802.3bt (60W Output Port 2 IEEE802.3at (30W) Output Port 3-5 Backplane bandwidth Store and forward MAC address table 1k Switching capacity 10Gbps Forwarding Rate 10BASE-tx: 14880PPS/port 100BASE-tx:148800pps/port 1000BASE-tx:1488000pps/port Port Function Power priority mechanism fast and forward MAC automatic learning and aging IEEE802.3X Full-duplex and mode and backpressure for Half-duplex mode Packet forwarding rate 7.4Mpps PoE inputs 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-) PoE outputs Ports 1-3 (1/2 +, 3/6-line pair) Port 4 (1/2 +, 3/6-, 4/5 +, 7/8-line pair) Operating temperature -10~55°C Storage temperature -40~85°C Humidity Operating: 10% to 90% relative humidity (non-condensing) Storage: 5% to 95% relative humidity (non-condensing) PoE power Input:DC44-57V 90W Output:DC44-57V 85W PoE voltage 44-57 Vdc Size of the product 82*52*23mm Weight of the product 55g Marks CE

Ubiquiti Unifi Switch Gen2 48-Port Managed PoE-Switch mit 48 Ports mit (32) 802.3at PoE + -Ports, (8) Gigabit-Ethernet-Ports und (2) SFP-Ports. Leistungsstarker UniFi-Switch der zweiten Generation. Model: USW-48-POE-EU Der USW-48-POE ist ein konfigurierbarer Gigabit-Layer-2-Switch mit achtundvierzig Gigabit-Ethernet-Ports, einschließlich zweiundreißig 802.3at PoE + -Ports mit automatischer Erkennung und zwei SFP-Ports. Es bietet Gigabit PoE-Verbindungen zu Ihren RJ45-Ethernet-Geräten und Gigabit-Glasfaser-Uplink-Optionen zu Ihrem Unternehmensnetzwerk. Der USW-24-POE verfügt über ein 1,3-Zoll-Touch-LCM zur Bereitstellung von Statusinformationen. Mit einer Tiefe von 7,9 Zoll kann das kompakte lüfterlose Design problemlos in einem SOHO-Rack-Schrank installiert werden. Der USW-48-POE wird vom UniFi-Netzwerkcontroller mit Unterstützung für mobile UniFi-Apps verwaltet und konfiguriert und bietet eine umfangreiche Suite fortschrittlicher Layer 2-Switching-Protokolle und -Funktionen, einschließlich des Betriebsmodus (Switching, Spiegelung oder Aggregat) pro Port. Mit dem UniFi Network Controller und der mobilen App können Administratoren praktisch alle Switch-Funktionen in einer grafischen Benutzeroberfläche von überall aus konfigurieren und überwachen. Features: (1) 1.3" LCM color touchscreen with AR switch management (32) GbE, 802.3at PoE+ RJ45 ports (16) GbE RJ45 ports (4) 1G SFP ports 195W total PoE supply Fanless, silent cooling Technische Daten:

Small-size & Costeffective 8 Port Easy Smart Managed Gigabit Layer-2 Switch, 4x Ports with PoE IEEE802.3af/at and 2Ports SFP-Slots FANLESS for Desktopinstallations Highlights: 10 Port Gigabit non-blocking Switch Architeture 4 Ports with PoE IEEE802.3af/at and 2 Ports SFP Gigabit Slots support 10/100/1000Mbps and Duplexmodus (half/full) auto-detection IGMP Snooping QoS (Port Based, 802.1p) Stormcontrol (Broadcast, Multicast, Unicast) Rate Control FANLESS Solution Wall-Mount option The ALL-SG8210PM provides 8x 10/100/1000Mbps ports. The switch provides performance, QoS, advanced security strategies and rich layer 2 management features. This Gigabit managed switch is cost-effective for the ideal small and medium business solution. The ALL-SG8210PM Switch support Easy Smart features like VLAN, IGMP Snooping & QoS. Anymore, the easy-to-use easy web management interfaces, for faster setup and configuration with less downtime. For workgroup and departments requiring cost-sensitive Layer 2 Switch and gigabit capability, ALLNET managed Switch ALL-SG8210PM provides you the ideal access-edge solution. Technical Details: Item Specifications Network Standards IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX IEEE 802.3af PoE (15.4W) IEEE 802.3at PoE+(30W) IEEE 802.3x Flow Control IEEE 802.1Q VLAN tag IEEE 802.3ad LACP aggregation IEEE 802.3az EEE IEEE 802.1p class of service, priority protocols Switch Function RJ-45 Port: 8 x 10/100/1000 Mbps SFP Port: 2 x Gigabit PoE Port: 4 x Ports, support IEEE802.3at and IEEE802.3af, up to 60W MAC Address table: 4K Buffer Memory: 1.5Mb Jumbo Frames: 9216 Bytes Transmission Method: Store and Forward Management Tagged Based VLAN: 32, VID = 1~4094 Management VLAN IGMP Snooping V1, V2, V3 Link Aggregation QoS: Port-based, IEEE 802.1p Port configuration: Port Status, Port Mirror Broadcast Storm Control Rate Limit Loop Detection and Prevention PoE control: PoE On/Off, PoE Status Management: Web GUI Configuration, Password Protection, Configuration Backup/Restore, Firmware Upgrade LED Definition Power/System: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE max power budget (50W) On: Over PoE max power budget (50W) RJ45 Port: LINK/ACT: bio-color LED Off: port disconnected or link fail Green on: 1000Mbps connected Amber on: 10/100Mbps connected Blinking: sending or receiving data SFP Port: LINK/ACT: single-color LED Off: disconnected or fail Green: 1000Mbps connected Blinking: data transmitting PoE: Off: PoE power output off Green on: PoE power output on Power Supply AC-to-DC external power adapter Input: 100-240V AC Output: 55V DC/1.3A PoE Budget Alert: 50W Budget: 60W Housing and Dimensions Metal Housing and Fan-less 240 x 105 x 27 mm (L x W x H) Weight 0.55Kg Temperature Operating:0 ~ 50° Storage :-40 ~ 70° Humidity Operating: 10% ~ 90% RH (non-condensing) Storage : 5% ~ 90% RH (non-condensing) Compliance CE

28 Port Smart Managed Gigabit Switch 24x PoE+ RJ45, 4x Combo, 375Watt PoE+, Hybrid Mode (Webmanaged und Cloudmanaged nutzbar)

5-port 10/100/1000M PoE Ethernet Switch with 2-port PoE and 1-port PD Highlights: 5-Port 10/100/1000BaseT(X) with 2 PSE Port and 1 PD Port Compliant with 2x IEEE 802.3af PSE and IEEE802.3at PD Input Metal case with Palm, Size NO power supply needed when powered over PD Port FANLESS DESIGN   The device is a powerful, high-performance Gigabit Ethernet Switch, with all 5 ports capable of 10/100/1000Mbps auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps network with no pain.     This switch supports PoE pass-through, having both PD (Powered Device) and PSE (Power Sourcing Equipment) features in one single device, which means the switch could get power from the PD port by connecting to a PSE device and supply power on the 2 PSE ports for connected devices via CAT 5e or better twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone (PD devices) to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety.     The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LED indicators on the front-panel provide the operating status of individual port and whole system.     Technical Details:     Standards IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet (PD INPUT) IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3x Flow Control Features Number of Ports: 5 10/100/1000BaseT(X) with 2 PSE Port and 1 PD Port Transmission Method: Store and Forward Filtering/Forwarding Rates 1000Mbps port ? 1,488,000pps 100Mbps port - 148,800pps 10Mbps port - 14,880pps Buffer Memory 128K Bytes frame Buffer MAC Table 4000 Transmission Media 10/100BaseTX Cat. 5 UTP/STP 1000BaseT Cat. 5E UTP/STP Led Indicators Device: 1x Power  1x Uplink 1x PD per Port:  je 1x LINK/ACT 2x PoE PSE Power Supply 48V/DC with 36W or 1x Port PoE IEEE802.3at INPUT Power Budget Powered from PD Port : 25W "Uplink PD" Powered from PD Port and 36W power adaptor :36W (The power adaptor is for optional) Dimensions 115 × 85 × 26 mm (L x W x H) Weight 0,4kg Operating Temperature 0 to 50°C Humidity 10 to 90% RH (non-condensing) Certifications FCC Class B, CE  

8-port 10/100/1000M PoE Ethernet Switch with 4-port PoE and 1-port PD Highlights: 8-Port 10/100/1000BaseT(X) with 4 PSE Port and 1 PD Port Compliant with 4x IEEE 802.3af PSE and IEEE802.3at PD Input Metal case with Palm, Size NO power supply needed when powered over PD Port FANLESS DESIGN The device is a powerful, high-performance Gigabit Ethernet Switch, with all 8 ports capable of 10/100/1000Mbps auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps network with no pain. This switch supports PoE pass-through, having both PD (Powered Device) and PSE (Power Sourcing Equipment) features in one single device, which means the switch could get power from the PD port by connecting to a PSE device and supply power on the 4 PSE ports for connected devices via CAT 5e or better twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone (PD devices) to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety. The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LED indicators on the front-panel provide the operating status of individual port and whole system. Technical Details:  Item    Specification    Functions:    Number of Ports: 8 10/100/1000BaseT(X) with 4 PSE port and 1 PD port       Transmission method: store and forward    Interface:    8* 10/100/1000Mbps RJ-45 switching ports combine       4* PSE (af) ports & 1* PD port    NWay protocol support:    Network speed: 10 / 100 / 1000Mbps       10Mbps: Full/Half duplex       100Mbps: Full/Half duplex       1000Mbps: Full duplex    Standards:    802,3 Ethernet       802,3u fast ethernet       802,3ab gigabit ethernet 802,3x flow control for full duplex 802,1p CoS    LED:    Per Unit: Power and System status each (Green).       Per Port: Activity/Link (Green).       PD port : Uplink and PD status each (Green).       Optional for loop detection LED (Red).    Weight:    352g (Device)    Temperature operating:    0 to 50°C    Power supply:    Universal external AC/DC power adaptor 48V/1,25A    Humidity operating:    10 bis 90% RH (non condensing)    Dimension:    L193 x W84 x 26 mm    Marks:    FCC Class B, CE Class B, LVD EN60950-1  

Highlights 2.5 Gigabit PoE+ injector compliant with IEEE 802.3af/at Up to 30 W PoE output power for high-performance end devices 2.5GBASE-T (10/100/1000/2500 Mbit/s) for maximum network performance Plug & Play – no configuration required Automatic detection of PoE-enabled devices Internal power supply (100–240 VAC) – no external power supply required Silent operation thanks to fanless metal housing Integrated overcurrent, short-circuit and overvoltage protection Status LEDs for power and PoE link Ideal for Wi-Fi access points, IP cameras, VoIP telephones and other PoE devices The ALLNET ALL0489v4 is a high-performance 2.5 Gigabit PoE+ injector that delivers data and power via a single network cable. With an output power of up to 30 watts in accordance with IEEE 802.3at, the injector is ideal for modern PoE devices such as Wi-Fi 6/6E/7 access points, IP cameras, VoIP telephones or industrial network devices. Thanks to its support for 10/100/1000/2500 Mbit/s, the ALL0489v4 can be easily integrated into existing multi-gigabit networks without limiting the data transfer rate. Automatic PoE detection ensures that only compatible devices are powered and reliably protects non-PoE devices. The integrated wide-range power supply (100–240 VAC) enables easy installation without the need for an external power supply. The robust metal housing with fanless, passive cooling ensures silent and reliable continuous operation – whether in the office or in industrial and surveillance applications. With comprehensive protection mechanisms against overcurrent, short circuits, ESD and overvoltage, the ALL0489v4 ensures safe operation even in demanding network environments. Typical applications (use cases) Wi-Fi 6 / Wi-Fi 7 access points Powering modern access points via a single network cable – ideal where there is no mains socket. IP video surveillance Power supply for PoE IP cameras with a 2.5-gigabit data connection for high-resolution video transmission. VoIP telephones Simple installation of IP telephones without a separate power supply unit. Network extensions Retrofitting PoE functionality to existing switches that do not support PoE. Industry & Building Automation Reliable power supply for industrial network devices, sensors and control systems. Digital signage Power supply for PoE-enabled displays, information terminals or kiosk systems. Smart buildings Use in access control systems, door intercoms, IoT gateways and other PoE applications. Target groups System houses and network integrators Electricians IT departments Businesses CCTV installers Smart building integrators Industrial and automation companies Data centres and server rooms Technical Details Technical Specifications Product Type 2.5 Gigabit PoE+ Injector Network Interfaces 1 × RJ45 10/100/1000/2500Base-T (Data In) 1 × RJ45 10/100/1000/2500Base-T PoE+ (Power & Data Out) Data Rate 10 / 100 / 1000 / 2500 Mbps PoE Standards IEEE 802.3af (15.4 W), IEEE 802.3at (30 W) Maximum PoE Output 30 W Supported Standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3bz IEEE 802.3af IEEE 802.3at Auto Negotiation Supported PoE Detection Automatic PD Detection LED Indicators Power (Green), PoE Link (Green) Power Supply Internal switching power supply, 100–240 VAC, 47–63 Hz, 54 VDC / 40 W Cooling Fanless Passive Cooling Housing Metal Housing Earthing Earthing Screw (GND) Protection Overcurrent Protection Short-circuit Protection ESD Protection Surge Protection ESD Protection IEC 61000-4-2 Contact ±4 kV, Air ±8 kV EFT Protection IEC 61000-4-4 Power 2 kV, LAN 1 kV Surge Protection IEC61000-4-5 Line-to-Line & Line-to-GND Level 3 (2 kV) MTBF > 50,000 hours @ 45°C Operating Temperature 0°C to +45°C Storage Temperature -20°C to +70°C Operating Humidity 10%–90% RH (non-condensing) Storage Humidity 5%–90% RH (non-condensing) Dimensions (W × D × H) 130 × 62 × 36 mm Compliance CE, FCC, VCCI Class B, CE LVD

ALLNET switch unmanaged industrial 4-port Gigabit 180W / 2x PoE bt / 2x SFP / fanless / DIN / IP40 / "ALL-SGI8004P Highlights: Compact industrial switch with 2x 10/100/1000M PoE copper ports and 2x 1000M SFP ports for GBICS 2x HighPower PoE ports, up to 90 Watt per port; The fiber ports offer 2 modes which can be selected by the dip switch: 100M mode and 1000M mode, to adapt to different requirements; Supports relay alarm for power off, network interruption and PoE off Supports PoE auto check function, which is specially designed to solve the problems of frozen PoE devices. It can automatically detect the frozen PD devices and restart the output of PSE to the ports and reboot the PD device. Support 6KV overvoltage protection, 6KV contact / 8KV air ESD protection. Extended temperature range of -40°~75°. The ALLNET industrial switch ALL-SGI8004P is a very small switch with an extended temperature range of -40°C - +75°C. Due to its small dimensions it is very well suited for switch cabinets and fuse boxes and is also used in industry with strong requirements for dirt and dust protection. Scope of delivery: Manual, top-hat rail clamp, 5-fold Phoenix clamp power connection, switch, no power supply unit included. Technical Details: Parameter Specifications Power supply Powered by power adaptor Range of voltage DC 48~57V "extra power supply needed, see accessories" Consumption Self consumption<5W Downlink ports Ports 1~2 10/100/1000Base-T 90W PoE RJ45 Uplink ports Ports 3~4 supports 2 modes of 100Base-FX and 1000Base-X PoE Auto-check If detect the frozen PD device, restart it Working mode of Fibre Ports It can be selected 100M or 1000M work mode by dip switch Relay alarm 1 channel relay alarm output for power off, ports PoE off, ports link down Cable and distance Use cat5e/6,100m max Standard IEEE802.3, IEEE802.3u, IEEE802.3z Switch fabric 8 Gbps Though put 5.95 Mpps Buffer 1M MAC address table 8K Indicator Power: 2 *red Uplink3~4: Green LEDs indicate Link/Act; Downlink 1~2: Yellow LED indicate PoE, green LEDs indicate Link/Act Protection Surge: 6KV, standard: IEC61000-4-5 ESD: 6KV: contact / 8KV: air, standard:IEC61000-4-2 Working temperature -40°C~75°C Storage temperature -40°C~85°C Humidity 0~95%(Non condensation) Dimension(L×W×H) 101 mm×65 mm×36mm Material Aluminium alloy Colour Black Net-weight 300g Marks CE

ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 19" • Fanless • ALL-SG8310v2PM Highlights: 8-port 10/100/1000Mbps with full PoE support 2x SFP slots for optional MiniGBICS PoE power 4x a' 30 Watt (IEEE802.3at or 8x IEEE802.3af) FANLESS DESIGN with internal power supply unit Jumbo Frames and IGMP Snooping Support Link Aggregation and Rapid Spanning Tree IEEE802.1q VLAN tagging and 802.1p priority queues PoE budget 140 W The ALL-SG8310v2PM is an 8-port 10/100/1000Mbps switch with PoE support on all ports, perfect for segmenting larger networks. It is an excellent choice to provide your network with more power and efficiency. IEEE 802.3af&at Power over Ethernet (PoE). The ALL-SG8310v2PM supports IEEE 802.3at PoE standard on 4 ports ports with up to 30W power per port for the connected PoE end devices, or full IEEE802.3af power on 8 ports with up to 15.4W. The maximum PoE budget is 140W. The ALL-SG8310v2PM uses the existing LAN cabling for the power supply. This facilitates the installation of PoE end devices such as WLAN access points, IP cameras, VoIP telephones and much more, as no consideration has to be given to power sockets during placement. The PoE ON/OFF function allows the administrator to conveniently reset the end devices remotely by turning off the PoE power supply for each individual port. High-Speed Networking/Jumbo Frames Support The ALL-SG8310v2PM provides an excellent solution for expanding your Gigabit network. With Gigabit speed, this product offers high flexibility and bandwidth for connectivity to servers, workstations and other connected devices. In addition, it also supports 9.6K jumbo frames for better network utilization, which greatly improves the transfer of large files. Extensive management/administration features Modern applications for video surveillance with IP cameras and Voice over IP are increasingly replacing classic analog technologies. This also increases the demands on the network infrastructure. The ALLNET ALL-SG8310v2PM is equipped with many management and security functions for all modern communication scenarios. IGMP Snooping, Tagged VLAN, Quality of Service, Port Trunking, Flow Control, Storm Control, Link Aggregation, IEEE802.1x, SNMP v1/ v2c and Spanning Tree are only a small excerpt from the extensive feature portfolio of the ALL-SG8310v2PM. For more details see Technical Details.  Technical Details: Items Specifications Model No. ALL-SG8310v2PM Key Components RTL8382M Flash IC:16MB DDR: 1Gb IP808AR PSE controller I/O ports 8x GbE ports, RJ45 2 x SFP Giga ports Reset Button: reset to default setting, re-start system Console port by RTJ45 Type PoE ports Port# 1~ 8 IEEE802.3at, IEEE802.3af LED Define PWR/SYS: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE Max power Alert On: Over PoE Max power Alert Port LED: Link/ACT: Off: port disconnected or link fail Green on: 10/100/1000Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on SFP:          - Off: disconnected or fail          - Green: 100/1000Mbps connected          - Blinking: data transmitting HW feature IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3az EEE IEEE802.3at, IEEE802.3af MAC address Table: 8K Packet buffer size: 4.1M Jumbo Frame: 9K bytes Console Support Cisco-like CLI command Security DT Security circuit. PoE power pin-out Alternative A (Pin 1,2/3,6) PoE Output power capacity Maximum output :30W per each port Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discover the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable Power Input Internal power supply Input: 100-240V AC Output: 180W PoE Power Budget 140W Reset button Support reset to default configuration Dimension 265(W) x 183(D) x 44(H) mm FAN Design Fan-less Temperature Operating: 0 ~ 40? Storage : -40 ~ 70? Humidity Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing)   Software Features Status System Information     Logging Message     Port Statistics   Error Disabled   Bandwidth Utilization   Link Aggregation     MAC Address Table 8K   Network IP Address Static / Dynamic   System Time SNTP / From Computer / Manual Time   Port Port Setting State / Speed / Duplex / Flow Control   Error Disabled Recovery Interval ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood Link Aggregation Group   Port Setting State / Speed / Flow Control LACP   EEE     Jumbo Frame 9K Byte   PoE Global Setting Schedule Status   Priority Setting     Power Limit     Power Show     VLAN VLAN Create VLAN   VLAN Configuration   Membership   Port Setting   Voice VLAN Property   Voice OUI   Protocol VLAN Protocol Group   Group Binding   MAC VLAN MAC Group   Group Binding   Surveillance VLAN Property   Surveillance OUI   GVRP Property   Membership   Statistics   MAC Address Table Dynamic Address Aging Time   Static Address     Filtering Address     Spanning Tree Property State / Operation Mode / Path Cost / BPDU Handling Operation Mode : STP/RSTP/MSTP Port Setting     MST Instance     MST Port Setting     Statistics     Discovery LLDP Property   Port Setting   MED Network Policy   MED Port Setting   Packet View   Local Information   Neighbor   Statistics   Multicast General Property Unknown Multicast Action / Multicast Forward Method Group Address   Router Port   Forward All Table   Throttling   Filtering Profile   Filtering Binding   IGMP Snooping Property State / Version / Report Suppression Querier   Statistics   MLD Snooping Property State / Version / Report Suppression Statistics   MVR Property State / VLAN / Mode / Group Start / Group Count / Query Time Port Setting   Group Address     Security RADIUS     TACACS+     AAA Method List   Login Authentication Console / Telnet / SSH / HTTP / HTTPS Management Access Management VLAN   Management Service Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout Management ACL   Management ACE   Authentication Manager Property   Port Setting   MAC-Based Local Account   WEB-Based Local Account   Sessions   Port Security     Protected Port     Storm Control   State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown) DoS Property   Port Setting   Dynamic ARP Inspection Property   Statistics   DHCP Snooping Property   Statistics   Option82 Property   Option82 Circuit ID   IP Source Guard Port Setting   IMPV Binding   Save Database   ACL MAC ACL     MAC ACE     IPv4 ACL     IPv4 ACE     IPv6 ACL     IPv6 ACE       ACL Binding     QoS General Property CoS / DSCP / CoS-DSCP / IP Precedence Queue Scheduling Strict Priority / WRR CoS Mapping   DSCP Mapping   IP Precedence Mapping   Rate Limit Ingress / Egress Port   Egress Queue   Diagnostics Logging Property Console / RAM / Flash Remote Server   Mirroring     Ping     Traceroute     Copper Test     Fiber Module     UDLD Property Message Time Neighbor   Management User Account     Firmware Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Active Image Active Image  / Backup Image Configuration Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Save Configuration Source File / Destination File, Restore Factory Default SNMP View   Group   Community   User   Engine ID   Trap Event Authentication Failure / Link UP_Down / Cold Start / Warm Start Notification   RMON Statistics     History     Event     Alarm      

ALLNET Switch industrial full managed Layer2+ 6 Port GbE • PoE Budget 120W • 4x PoE+ • 2x SFP • Fanless • DIN • JSON • ALL-SGI8106PMJ Highlights: 4 Gigabit ports with PoE AF-AT support up to 30 watts per port 2x SFP ports for fibre optic GBIC e.g. ALL4750/4751-INDU etc. PoE ports 1-4 max. PoE IEEE802.3at 30W Layer2+ features such as 802.1Q VLAN, port isolation IGMP, LLDP, PoE+ management, IP source guard, ACLs etc. Supports spanning tree STP (802.1D) and RSTP (802.1W) and MSTP (802.1s) Supports PoE management such as PoE scheduling, PoE PD-alive, port PoE priority, soft reboot PoE non-stop Supports G.8032 quick ring protocol. Self-healing <20ms Max. PoE budget = 120 watts Freeless metal housing with optimised heat dissipation Easy to use as a table-top device, wall-mounted or top-hat rail Extended temperature range from -40°C ~ +75°C NEW: LAN JSON-Java-Script-Notation API for ON/OFF via remote   ALLNET ALL-SGI8106PMJ L2+ managed switch with 4 ports PoE is an industrial switch with 4-port Gigabit 802.3af/at PoE + 2-port Gigabit SFP optical port. It has a robust IP40 housing and a redundant power supply system. The industrial managed switch offers user-friendly but advanced IPv6/IPv4 management interfaces and a soft reboot PoE non-stop function and is the best investment for expanding industrial companies or upgrading their network infrastructure. Intelligent PD alive check for frozen PDs The ALL-SGI8106PMJ industrial PoE switch with 8 ports can be configured to monitor the status of the connected PDs in real time. As soon as the PD stops working and responding, the ALL-SGI8106PMJ restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is significantly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator. PoE schedule function for energy saving To protect the environment, the ALL-SGI8106PMJ Ethernet PoE switch can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The intelligent PoE switch ALL-SGI8106PMJ allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SGI8106PMJ supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as low as 20 ms.   1588 time protocol for industrial computer networks The ALL-SGI8106PMJ is ideal for telecommunications and carrier Ethernet applications and supports MEF service provisioning and timing-over-packet solutions for IEEE 1588 and synchronous Ethernet. Strong Layer 2 functions The ALL-SGI8106PMJ Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SGI8106PMJ enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SGI8106PMJ is equipped with console, web and SNMP management interfaces. With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option. For text-based management, access is possible via Telnet and the console port. For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session. Intelligent PoE switch with SFP DDM function The ALL-SGI8106PMJ supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage. The technical features and stable housing make the switch the ideal solution for industrial applications. Supplied without power supply unit - please order separately!  JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important. PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical details: Model ALL-SGI8106PMJ Copper Ports 4-10/100/1000BASE-T RJ45 auto-sensing ports Fibre ports 2-100/1000BASE-T SFP interfaces, supports 100/1000Mbps dual mode PoE ports 4-802.3af/802.3at PoE injector ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-Forward Switch Fabric 12Gbps/non-blocking Throughput 8.928Mpps @64 bytes Address Table 8K entries Share Data Buffer 4.1 Mb Jumbo Frame 9216 bytes SDRAM 1Gb Flash memory 128Mb Flow Control IEEE 802.3x pause frame for full-duplex ; Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power Supply 48 ~ 57 VDC, 50/60Hz,Dual DC PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED indicators Power: Green Solid on–power work normal,off–power disconnected System:Green Blink–work normally, solid on–soft work abnormal, fast blink–soft upgrade PoE: Yellow Solid on–PoE work normally, Off–PoE doesn’t work, Blink–PoE overload 10/100/1000T RJ45 interfaces (Port 1 to Port 4): 1000 LNK/ACT (Green), Blink–port connected with data transmission; Solid on–port connected without data transmission 100/1000Mbps SFP Interfaces (Port 5 to Port 6): Green Blink- port connected with data transmission; Solid on- port connected without data transmission EMC 6KV surge protection (6KV Common Mode, 2KV differential Mode), 6KV contact/8KV air ESD Surge Immunity:6KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2;EFT Level 4 Per: IEC61000-4-4 Dimension 145x112x47.2mm Weight 0.6kg Working Temperature -40°C to 75°C Storage Temperature -40°C to 80°C Operation Humidity 5% to 95%, non-condensing MTBF 50,000hrs Layer 2 functions Port configuration Auto-negotiation Flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP(Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring ALLNET ring, < 20ms Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting(Ingress/Egress) Stri Priority Security Features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload Dual firmware LLDP Configuration export/import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Telnet client Synchronisation, IEEE1588 Support IEEE1588v2 transparent clock Other Features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP option 67 DHCP option 82 NTP/SNTP client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Tracert/ Tracert 6  Layer 3 functions Static Routing IPv4 Unicast: Static Routing (Software Base) IPv6 Unicast: Static Routing (Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6  

TP-Link - TL-SG1005P - 5-Port Gigabit Desktop Switch with 4-Port PoE PORT: 4× Gigabit PoE Ports, 1× Gigabit Non-PoE Port SPEC: 802.3af, 56 W PoE Power, Desktop Steel Case FEATURE: Plug and Play

Ubiquiti Unifi Switch Gen2 24-Port Managed Switch mit 24 Ports und (2) SFP-Ports. Leistungsstarker UniFi-Switch der zweiten Generation. Model: USW-24 Der USW-24 ist ein konfigurierbarer Layer 2-Switch mit 24 Gigabit-Ethernet-Ports und 2 SFP-Ports. Die SFP-Ports bieten 1-Gbit / s-Glasfaser-Uplink-Optionen für Ihr Unternehmensnetzwerk. Der USW-24 verfügt über einen 1,3-Zoll-Touchscreen, eine kompakte Größe und ein lüfterloses Design. Der Touchscreen zeigt den aktuellen Schaltzustand und Informationen zur schnellen Diagnose an. Der USW-24-Switch wird vom UniFi-Netzwerkcontroller mit Unterstützung für die mobile UniFi-App verwaltet und konfiguriert Eine umfangreiche Suite fortschrittlicher Layer 2-Switching-Protokolle und -Funktionen, einschließlich des Betriebsmodus (Switching, Mirroring oder Aggregat) pro Port. Features: (24) GbE RJ45 ports (2) 1G SFP ports (1) 1.3" LCM color touchscreen with AR switch management Fanless, silent cooling Technische Daten:  

TP-Link - TL-SG108PE - 8-Port Gigabit Easy Smart Switch with 4-Port PoE+ PORT: 4× Gigabit PoE+ Ports, 4× Gigabit Non-PoE Ports SPEC: 802.3af/at, 64 W PoE Power, Desktop Steel Case FEATURE: PoE Auto Recovery, MTU/Port/Tag-based VLAN, QoS, IGMP Snooping, Web/Utility Management, Plug and Play

ZyXEL GS1900-10HP, 8-port GbE L2 PoE Smart Switch + 2 SFP slots, 802.3at, smart managed desktop switch; lüfterlos Power Budget 77W

TP-Link SG2008P (UN) – Kompakter Smart Managed PoE+ Switch mit 8 Gigabit-Ports Der TP-Link SG2008P (UN) ist ein leistungsstarker Smart Managed Gigabit-Switch mit PoE+-Unterstützung, ideal für kleine Netzwerke, die IP-Kameras, Access Points oder VoIP-Telefone über nur ein Kabel mit Daten und Strom versorgen möchten. Durch die Integration in das Omada SDN-System ist ein zentrales Netzwerkmanagement möglich. Wichtige Features: 8x Gigabit-Ports – Volle Gigabit-Geschwindigkeit für alle Anschlüsse 4x PoE+ Ports – Bis zu 30W pro Port, ideal für IP-Kameras, APs oder VoIP Smart Managed – VLAN, QoS, IGMP Snooping und weitere Layer-2-Funktionen Omada SDN kompatibel – Cloud- oder Controller-basiertes Management Lüfterloses Design – Absolut geräuschloser Betrieb Perfekt geeignet für: Kleine Büros und Home-Offices mit PoE-Anforderungen IP-basierte Videoüberwachung und WLAN-Installationen Netzwerke mit einfacher, aber professioneller Verwaltung Technische Daten im Überblick: Eigenschaft Details Modell SG2008P (UN) Ports 8x 1G RJ45, davon 4x mit PoE+ PoE Budget Bis zu 62 Watt gesamt Switching-Kapazität 16 Gbps Management Omada SDN / Web GUI / SNMP Layer-2-Funktionen VLAN, QoS, IGMP Snooping, Loop Prevention Geräuschentwicklung Lüfterlos (Silent)

ALLNET Switch industrial full managed Layer2+ 12 Port GbE • PoE Budget 240W • 8x PoE at • 4x SFP • Lüfterless • DIN • JSON API • ALL-SGI8112PMJ Highlights: 8 Gigabit ports with PoE AF-AT support up to 30Watt per port 4x SFP ports for fibre optic Gbics e.g. ALL4750-INDU / ALL4751-INDU etc. PoE ports 1-8 max. PoE IEEE802.3at 30W Layer2+ features such as 802.1Q VLAN, port isolation IGMP, LLDP, PoE+ management, IP source guard, ACLs etc. Supports spanning tree STP (802.1D) and RSTP (802.1W) and MSTP (802.1s) Supports PoE management such as PoE scheduling, PoE PD-alive, port PoE priority, soft reboot PoE non-stop Supports G.8032 quick ring protocol. Self-healing <20ms Max. PoE budget = 240 watts Freeless metal housing with optimised heat dissipation Easy to use as a table-top device, wall-mounted or top-hat rail Extended temperature range from -40°C ~ +75°C Hat rail bracket included in the scope of delivery  NEW: PoE & LAN JSON-Java-Script-Notation API for ON/OFF üvia Remote                                                                                                                                                                                                                                                               ALL-SGI8112PMJ Industrial Switch is a managed Layer 2+ Gigabit PoE switch with 8-port Gigabit 802.3af/at PoE and 4-port Gigabit SFP slot port. It is specifically designed to build a full Gigabit backbone to deliver reliable and fast data in demanding industrial environments and to forward data to remote networks over fibre optic cables. It features a robust IP40 enclosure and a redundant power supply system. The industrial managed switch offers user-friendly but advanced IPv6/IPv4 management interfaces and a soft reboot PoE non-stop function. It is the best investment for industrial companies looking to expand or upgrade their network infrastructure. Features: Support of L2+ switching functions including 802.1Q VLAN, mirroring, port isolation, IGMP snooping, DHCP snooping, LLDP, PoE+ management, IP source guard, ARP inspection, ACLs etc. Support of Spanning Tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1s) Support of extended management via WEB, CLI, TELNET, SSH, SNMP. Support for cable diagnostics Two firmware backups Supports PoE management, such as PoE schedule, PoE PD alive, port PoE priority, soft reboot PoE N on-stop Supports G.8032 quick ring protocol. Self-recovery time <20ms Supports IEEE1588 v2, transparent clock (TC) Supports DDM, SFP digital diagnostics & monitoring Supports IPV4 and IPV6 functions for static routing Supports memory and CPU monitoring 6KV &overvoltage protection (6KV common mode, 2KV differential mode), 6KV contact/8KV air ESD protection The technical features and stable housing make the switch the ideal solution for industrial applications. Supplied without power supply - please order separately! PoE schedule function for energy saving To protect the environment, the ALL-SGI8112PMJ Ethernet PoE switch can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The ALL-SGI8112PMJ intelligent PoE switch allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SGI8112PMJ supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.   1588 time protocol for industrial computer networks The AALL-SGI8112PMJ is ideal for telecom and carrier Ethernet applications and supports MEF service provisioning and timing-over-packet solutions for IEEE 1588 and synchronous Ethernet. Strong layer 2 functions The ALL-SGI8112PMJ Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SGI8112PMJ enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SGI8112PMJ is equipped with console, web and SNMP management interfaces. With the integrated web-based management interface, it offers user-friendly, platform-independent management and configuration options. For text-based management, access is possible via Telnet and the console port. Intelligent PoE switch with SFP DDM function TheALL-SGI8112PMJ supports the SFP DDM (Digital Diagnostic Monitor) function, which enables the network administrator to easily monitor real-time parameters of the SFP transceivers, e.g. optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.  The technical features and stable housing make the switch the ideal solution for industrial applications. Supplied without power supply unit - please order separately!  JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider to be important.   PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical details: Model ALL-SGI8112PMJ Copper Ports 8-10/100/1000BASE-T RJ45 auto-sensing ports Fibre ports 4-100/1000BASE-T SFP interfaces, supports 100/1000Mbps dual mode PoE ports 8-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-Forward Switch Fabric 24Gbps/non-blocking Throughput 17.856Mpps @64 bytes Address table 8K entries Share Data Buffer 4.1 Mb Jumbo Frame 9216 bytes SDRAM 1Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex ; Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power Supply 48 ~ 57 VDC, 50/60Hz,Dual DC Power Consumption without PoE ≤12W PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED indicators Power: Green Solid on--power work normal,off--power disconnected System:Green Blink--work normally, solid on--soft work abnormal, fast blink--soft upgrade PoE: Yellow Solid on-PoE work normally, Off--PoE doesn’t work, Blink--PoE overload 10/100/1000T RJ45 interfaces (Port 1 to Port 8): 1000 LNK/ACT (Green), Blink--port connected with data transmission; Solid on--port connected without data transmission 100/1000Mbps SFP Interfaces (Port 9 to Port 12): Green Blink- port connected with data transmission; Solid on- port connected without data transmission EMC 6KV surge protection (6KV common mode, 2KV differential mode), 6KV contact/8KV air ESD Surge Immunity:6KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2;EFT Level 4 Per: IEC61000-4-4 Dimension 165x123x53.5mm Weight 1.0kg Working temperature -40°C to 75°C Storage Temperature -40°C to +80°C     MTBF 50,000hrs Port configuration Auto-negotiation flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP(Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting(Ingress/Egress) Stri Priority Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection SNMP v1/v2c with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload Dual firmware LLDP Configuration export/import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Support IEEE1588v2 transparent clock Other features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD

Highlights:     With 12*10/100/1000M PoE downlink ports, 4*1000M SFP ports;     Support PoE power each up to 30W;     Support L3 management, such as OSPF, RIP, QoS, VLAN, MSTP, Multi-broadcast, ports management and PoE management;     6KV surge protection, 8KV contact /15KV air ESD protection;     Support working temperature -40°C ~+75°C. ALLNET ALL-SGI8016PM is a professional yet affordable industrial L3 PoE switch with 16 Gigabit ports, supporting up to 12*10/100/1000M PoE downlink ports and 4* 1000M SFP ports. The 12*10/100/1000M ports support PoE+ and comply with IEEE 802.3af/at standard, PoE power per port up to 30W. It supports L3 management such as OSPF, RIP, QoS, VLAN, MSTP, multi-broadcast, port management and PoE management, and supports 6KV surge protection, 8KV contact/15KV air ESD protection. The wall, desktop and din-rail installation is reliable and durable, and can be used in security network video surveillance, network engineering and other occasions. Technical Details: Parameter Specifications Power supply Powered by power adaptor Range of voltage 2*DC 48~57V, redundancy power supply Consumption Self consumption<20W Downlink ports 10/100/1000Base-T 30W PoE RJ45(IEEE 802.3af/at) Uplink ports Ports 13~16 1000M SFP slots Cable and distance Use cat5e/6,100m max Standard IEEE802.3, IEEE802.3u, IEEE802.3z Switch fabric 32Gbps Though put 23.8Mpps Buffer 4M MAC address table 16K Indicator Power: 2 *red ; Uplink 13~16: green LEDs indicate Link/Act Downlink 1~12: On RJ45 green LEDs indicate Link/Act, yellow LEDs indicate PoE Protection Surge: 6KV, standard: IEC61000-4-5 ESD: 8KV: contact/15KV: air, standard:IEC61000-4-2 Working temperature -40°C~+75°C Storage temperature -40°C~+85°C Humidity 0~95%(No condensation) Dimension(L×W×H) 165 mm×114 mm×46mm Material Metal Colour Black Net-weight 530g L2 Features Port configuration Auto-negotiation Flow Control Port Mirror L2 Features Link Aggregation Traffic statistics Static link aggregation LACP Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP 8 groups 8 ports per group L2 Features MAC Table Aging Time Static MAC address Dynamic MAC address management L2 Features VLAN 4K Active VLANs 4K VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Management VLAN Voice VLAN Q-in-Q Private VLAN GARP/GVRP L2 Features ACL 64 ACLs L2, L3 e L4 Time-based ACL L2 Features Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter L2 Features Multicast 256 groups IGMP v1/v2/v3 Fast Leave Multicast VLAN Static Multicast Multicast Filter IGMP Statistics MLD Snooping L2 Features PoE management Support total power consumption control Support single port PoE ON/OFF Support port output priority L2 Features QOS 4 priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port Security Features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) up to 200 entries ARP Protection DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type 802.1x Autentication (port-based e MAC-based) TACACS/TACACS+ Autentication RADIUS Autentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port Port Isolation Local User Name Password Authentication (2 levels) Loopback detection Management SNMP v1/v2c/v3 RMON 4 grupos WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload All possible configurations in the CLI must exist in the WEB interface LLDP Other Features DHCP Relay DHCP Client DHCP Snooping DHCP Option 82 SNTP Client BOOTP Client Maintenance Ping and Tracert System log (Local and Remote) Memory and CPU Monitoring L3 Features Static Routing OSPFv2 RIPv1/v2 DHCP Server IPV6 IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Tracert6 Telnet(v6) Http/Https IPv6 TFTP Static Routing Interface IPV6  

TP-Link - TL-SG105PE - 5-Port Gigabit Easy Smart Switch with 4-Port PoE+ PORT: 4× Gigabit PoE+ Ports, 1× Gigabit Non-PoE Ports SPEC: 802.3at/af, 65 W PoE Power, Desktop Steel Case FEATURE: MTU/Port/Tag-based VLAN, QoS, IGMP Snooping, Web/Utility Management, Plug and Play

JetStream-28-Port-Gigabit-Smart-PoE-Switch mit 4 SFP-Slots 250W PoE-Leistung: 24× 802.3at/af-konforme PoE+-Ports mit einer Gesamtleistung von 250W*. Komplett Gigabit: 24× Gigabit-PoE+-Ports und 4× Gigabit SFP-Slots ermöglichen Hochgeschwindigkeitsübertragungen. In Omada-SDN integriert: Zero-Touch Provisioning (ZTP)**, zentralisiertes Cloud-Management, intelligente Netzwerküberwachung. Zentralisiertes Management: Der Cloudzugriff und die Omada-App ermöglichen eine sehr komfortable, einfache Verwaltung. Statisches Routing: Routet internes Datenverkehr für eine effizientere Netzwerknutzung. Solide Sicherheitsstrategien: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm conntrol, DHCP Snooping, 802.1X, Radius Authentication und mehr. Optimierte Voice- und Video-Anwendungen: L2/L3/L4 QoS und IGMP Snooping. IPv6: IPv6 Unterstützung mit dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery.

ALLNET Switch unmanaged 18 port Gigabit 240W / 16x PoE+ / 2x SFP / Fanless / 19" / "ALL-SG8018P" Highlights: 16 x 10/100/1000Mbps Auto MDI/MDI-X Ethernet port 2x SFP Gigabit ports Fanless Supports Jumbo frames 10K bytes. PoE Alternative A (Pin 1,2/3,6) Introducing the ALLNET Switch unmanaged Layer2 18 Port – a powerful networking device designed for small-scale environments, renowned for its impressive performance and silent operation. Featuring 16 x 10/100/1000Mbps Auto MDI/MDI-X Ethernet ports, this switch offers reliable connectivity for your network devices. The 2x SFP Gigabit ports allow seamless integration of fiber connections, enhancing the flexibility of your network infrastructure. With a PoE budget of 240W, this switch can power PoE-enabled devices without the need for additional power cables, simplifying installation and maintenance tasks. Supporting Jumbo Frames up to 10K bytes, it efficiently handles large data transfers. Designed with a fanless architecture, this switch is perfect for environments where absolute silence is required. Its silent operation ensures quiet performance without compromising on functionality or power. Equipped with optional SFP slots, you can expand the switch with two additional uplink ports, supporting both fiber and copper connections to meet the diverse needs of your network. Rely on the ALLNET Switch unmanaged Layer2 18 Port – the ideal solution for a high-performance and noise-free networking environment.  Mechanical Drawings: Front-Panel:   Technical Details: Items Specifications Model No. ALL-SG8018P Key Components RTL8382L+RTL8218D IP808ARx2 I/O ports 16x GbE ports, RJ45 2x SFP Giga Ports PoE ports Port# 1~ 16 IEEE802.3at, IEEE802.3af LED Define PWR: Green LED Off: power off or fail On: power on PoE Max.: Green LED Off: No over PoE max power Alert On: Over PoE max power Alert 16 RJ45 Port LED: one bi-color LEDs on daughter board Link/ACT: Green/Amber Off: port disconnected or link fail Green on: 10/100/1000Mbps connected Blinking: sending or receiving data PoE: Green LED Off: PoE power output off Green on: PoE power output on SFP Port: - Off: disconnected or fail - Green: 100/1000Mbps connected - Blinking: data transmitting HW feature IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3x flow control & back pressure IEEE802.3z 1000Base SX/LX IEEE802.3az EEE Disable IEEE802.3at, IEEE802.3af Switch Capacity: 36Gbps bi-direction Forwarding Mode: Store and Forward MAC address Table: 8K Packet buffer size: 4.1M bit Jumbo Frame: 10K bytes Power Input Internal power supply Input: 100-240V AC Output: 280W E-cap life time >3 years @ 40? PoE power pin-out Alternative A (Pin 1,2/3,6) PoE Output power capacity Maximum output :30W per each port Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discover the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority can be configured and default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable PoE Power Budget 240Watt Dimension 330mmx230mmx44mm FAN Design FANLESS Temperature Operating: 0 ~ 40°C Storage : -40 ~ 70°C Humidity Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing)