Zyxel Switch smart managed Layer2 28 Port • 24x 1 GbE • PoE Budget 375 Watt • 24x PoE at • 4x 1 Gb Combo • 19" • NebulaFlex • GS1920-24HPV2

ALLNET Switch full managed 24 Port Gigabit 390W / 24x PoE+ / 4x SFP / FANLES / 19" / "ALL-SG8626PM" Cost-effective 24 Port Smart Managed Gigabit Layer-2 Switch + 4x SFP MiniGbic Slots without Fan for Desktop and 19" Rack Installation Highlights: 24 Port Gigabit Layer2+ Switch Architecture Port 23/24 combo ports for TP or SFP + Port 25/26 SFP slots Supports various PoE management functions, including PoE shedule, PoE PD alive, etc. Supports SFP DDM & cable diagnostics Supports G.8032 ERPS, self-detection time < 20 ms Supports port aggregation 4KV surge protection, 6KV contact/8KV air ESD protection Totally fanless, no more annoying noise....  max. 390W budget 19 "inch angle or wall/table mounting possible ALL-SG8626PM is a layer 2+ full managed switch PoE, which supplies 24**10/100/1000M RJ45 ports and 4*1G uplink  SFP slot ports ( 2 shared combo), with 24 port PoE with IEEE802.3 af/at standards, single port POE power output up to 30W. Rich PoE Management Function Being the managed PoE switches for CCTV surveillance, wireless and VoIP networks, ALL-SG8626PM features the following special PoE management functions: PoE PD-alive check Scheduled power rebooting PoE schedule PoE usage monitoring Soft-reboot PoE Non-stop PoE port power feeding priority Smart PoE PD-Alive Check ALL-SG8626PM managed PoE switch can be configured to monitor connected PD status in real time. Once the PD stops working and responding, ALL-SG8626PM will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden. PoE Schedule Function for Energy Saving For environmental protection purpose, the ALL-SG8626PM switch Ethernet PoE can effectively control the power supply besides its capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled PD Re-starting The ALL-SG8626PM smart switch PoE allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. Fast Recovery Redundant Ring for Critical Network Applications The ALL-SG8626PM supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. Strong Layer 2 Features The ALL-SG8626PM layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. Via the aggregation of supporting ports, the ALL-SG8626PM allows the operation of a high-speed trunk group that comes with multiple ports and supports fail-over as well. Efficient and Various Management Methods For efficient management, the ALL-SG8626PM is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, it offers an easy-to-use, platform-independent management and configuration facility. For text-based management, it can be accessed via Telnet and the console port. For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management. Intelligent PoE Switch SFP DDM Function The ALL-SG8626PM supports SFP-DDM (digital diagnostic monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Technische Daten: Model ALL-SG8626PM Copper Ports 22-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Combo Interfaces 2x 100/1000BASE-X SFP interface shared with port-23 and port-24; Supports 100/1000Mbps dual mode and DDM Fiber Ports 2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode PoE Ports 1~24-802.3af/802.3at PoE Injector Ports Console Ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 52 Gbps/non-blocking Throughput 38.69Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 Bytes SDRAM 1Gb Flash Memory 128Mb Flow Control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset Button >2 sec.: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power Consumption Max. 400 watts/1122 BTU PoE Standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED Indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 24): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 22 to Port 24): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation Flow Control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link Aggregation Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorith based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunneling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast Routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting (Ingress/Egress) Stri Priority Security Features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload  Dual Firmware LLDP Configuration Export/Import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other Features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE Non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static Routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 440x290x44.5 mm Weight 4.5 kg Working Temperature -10 °C to 45 °C Storage Temperature -20 °C to 70 °C MTBF 50,000hrs

ALL4750, ALLNET/D-Link/ZyXEL/Enterasys/Lancom, LC-Connector 1.125G 850 nm Multimode, SFP, 550m range

Universal miniGBIC LHX module with LC connectorfor ALLNET/3Com/Cisco/D-Link, 1.125G 1310nm 3.3V Singlemode, SFP   Range: 40km at 9/125 µm cable

Universal miniGBIC ZX module with LC connector for ALLNET/3Com/Cisco/D-Link, 1.125G 1550nm 3.3V Singlemode, SFP Range: 70-80 km at 9/125 µm cable

Universal miniGBIC LX module with LC connector for ALLNET/3Com/Cisco/D-Link/ZyXEL/Enterasys/Lancom, 1.125G 1310nm Singlemode, SFP Range: 10 km at 9/125 µm cable

for ALLNET/D-Link/Lancom/Zyxel, LC connector 1.125G 1310nm 3.3V singlemode, SFP, 20KM range

Highlights:   Plug and Play installation Reliable surge protection for all devices with a network connection: • Switche, Router, Firewall, xDSL Modem, ISDN, NoteBook, PC / Server • Television • Multimedia Devices Protect your network equipment from power surges by lightning The ALLNET ALL95100 provides a cost-effective and reliable protection against damage to sensitive equipment. Housed in a compact body the ALLNET surge protection is simply inserted between the network cable or xDSL / ISDN connection and the equipment to be protected.   Without con guration the device is immediately protected from power surges. Along with a regular surge protector and bonding can be for example the infrastructure in safety-relevant areas permanently protected. Not only indoors, but also particularly like the outside, the ALL95100 is used effectively in conjunction with PoE enabled IP Cam‘s and wireless access points. Technical Details: Element Spezifikation Network Interface: 2x RJ45 10/100/1000Mbps PoE-Capability: IEEE802.3af, at, LTPoE++ bis 90W Arrest capacity: 10kA (8/20µs), 100A (10/1000µs) Ignition voltage: 90VDC ±20% (Pair to Earth) <450V (bei 100V/µs) <600V (bei 1kV/µs) Diff. Clamping: <15V, <5ns, 30Apk (Pair wire to wire) Diff. Capacity: <4.0pF Lines protected: (Pins)1 - 8 (at 8 pin modular plug) Test mark: IEEE 802.3, CAT 5, 6 ESD Protection: IEC 61000-4-2 class 4 (10kV CD) Housing: metal case Enviroment: Temperature operating: -15 ~ 40 °C Humidity operating: 10% ~ 95% (non condensed) Marks: CE, RoHS Maße: 82 x 25 x 25 mm (Length x Width x Height) weight: 200 Gramm Package content: -ALLNET ALL95100 -QIG

Highlights: 12 Port 19" 1U rack mounting Reliable protection against overvoltages of all devices with network connection switches router firewall NoteBook PC / Server televisions Multimedia Devices Protect your network devices from lightning surges The ALLNET ALL95112 12x overvoltage panel has one input and one output per port and can be safely accommodated in the server cabinet thanks to its 19 inch metal housing. The devices connected via the ALLNET ALL95112 panel are reliably protected against current fluctuations, such as can occur during thunderstorms or overvoltages. The great advantage of the 19-inch version is the convenient option of equipping several network devices with surge protection in a neat and space-saving manner. All network-capable (ALL-IP connections) WITHOUT PHANTOMIC VOLTAGE, ADSL or VDSL devices can be connected via the panel and reliably protected against overvoltage damage. Since the signals are only looped through, the PoE power supply with up to 90 watts via LTPoE++ is still possible without restrictions. In addition, all speed levels up to Gigabit are supported without any loss of speed. In the event of power fluctuations, the discharge capacity is up to 10kA per port, which enables effective protection of the connected devices. With the ALLNET Protection Panel, devices connected via PoE, such as IP cameras or access points, can be protected against damage. Application examples: Technische Daten: Element Spezifikation Network connectors: 12x RJ45 Inputs 12x RJ45 Outputs PoE-support IEEE802.3af, at, LTPoE++ max 90W Discharge capacity: 10kA (8/20µs), 100A (10/1000µs) Ignition voltage: 90VDC ±20% (Pair to Earth) <450V (by 100V/µs) <600V (by 1kV/µs) Diff. Clamping: <15V, <5ns, 30Apk (Pair wire to wire) Diff. Capacity: <4.0pF protected conductors: (pins)1 - 8 (on 8-pin module plug) Networks-Standards: IEEE 802.3, CAT 5, 6 ESD protection: IEC 61000-4-2 class 4 (10kV CD) Housing: metal casing Environment: Temperature Operation: -15 ~ 40 °C Humidity Operating: 10% ~ 95% (non-condensing) Marks CE, RoHS Dimensions: 482mm x 44mm x 98mm (width x height x depth) Weight: 1055g Package contents: -ALLNET ALL95112 -instruction manual

.Quickly and Easily test PoE existence of Ethernet network, .Compliant with IEEE 802.3at/af PoE Standard; .RJ45 connector, simply plug in the cable; .Compact design specially tailored for system integrator and installers. 1. When the PoE Type A lighting, it means endspan (12/36) is providing power, and it?fs 802.3af standard, the output power is 15.4W (PD Max 12.95W) 2. When the PoE Type A & AT Type A are lighting, it means endspan (12/36) is providing power, and it?fs 802.3at standard, the output power is 30.0W (PD Max 25.50W) 3. When the PoE Type B lighting, it means midspan (45/78) is providing power, and it?fs 802.3af standard, the output power is 15.4W (PD Max 12.95W) 4. When the PoE Type B & AT Type B are lighting, it means midspan (45/78) is providing power, and it?fs 802.3at standard, the output power is 30.0W (PD Max 25.50W) 5. When the PoE Type A & PoE Type B are lighting, it means midspan & endspan (4 pairs) is providing power, and it?fs 802.3af standard, the output power is 30.0W 6. When the 4 Leds are lighting, it means midspan & endspan (4 pairs) is providing power, and it?fs 802.3at standard, the output power is 60.0W 7. When there?fs No Leds lighting, it means no PoE.

Mini Gbic, SFP-Anschluss, Multimode, DDMI Version, 500m Reichweite

Abmasse: H44xB433xT235mm, Laufzeit: 13/4min(halb/voll-Last) (1) USB, (1) seriell, (1) Remote Control Port, (6) IEC C13 Kaltgeräte Dose Line-interactive USV Topologie Energiesparende Technologie Simulierter Sinuswellen-Ausgang Automatische Spannungsregulierung (AVR) Überlastschutz Hot-Swap-fähige Batterien Überspannungs- und Blitzschutz EMI und RFI Filter Telefon / Fax / Modem / DSL / Netzwerkschutz LCD-Statusanzeige USB-Kommunikationsanschluss PowerPanel® Verwaltungssoftware SNMP / HTTP-Fernverwaltungsfähigkeit (optional) Rackmount 19 Zoll Format https://www.cyberpower.com/de/de/product/sku/OR600ERM1U#runtime_chart

Abmasse: H44xB433xT235mm, Laufzeit: 13/4min(halb/voll-Last) (1) USB, (1) seriell, (1) Remote Control Port, (4) CEE7-Schutzkontakt Dose Line-interactive USV Topologie Energiesparende Technologie Simulierter Sinuswellen-Ausgang Automatische Spannungsregulierung (AVR) Überlastschutz Hot-Swap-fähige Batterien Überspannungs- und Blitzschutz EMI und RFI Filter Telefon / Fax / Modem / DSL / Netzwerkschutz LCD-Statusanzeige USB-Kommunikationsanschluss PowerPanel® Verwaltungssoftware SNMP / HTTP-Fernverwaltungsfähigkeit (optional) Rackmount 19 Zoll Format https://www.cyberpower.com/de/de/product/sku/OR650ERM1UGR#runtime_chart

Abmasse: H44xB433xT389mm, Laufzeit: 14/3,5min(halb/voll-Last) (1) USB, (1) seriell, (1) Remote Control Port, (6) IEC C13 Kaltgeräte Dose Line-interactive USV Topologie Energiesparende Technologie Simulierter Sinuswellen-Ausgang Automatische Spannungsregulierung (AVR) Überlastschutz Hot-Swap-fähige Batterien Überspannungs- und Blitzschutz EMI und RFI Filter Telefon / Fax / Modem / DSL / Netzwerkschutz LCD-Statusanzeige USB-Kommunikationsanschluss PowerPanel® Verwaltungssoftware SNMP / HTTP-Fernverwaltungsfähigkeit (optional) Rackmount 19 Zoll Format https://www.cyberpower.com/de/de/product/sku/OR1000ERM1U#runtime_chart

Abmasse: H44xB433xT389mm, Laufzeit: 11/2,5min(halb/voll-Last) (1) USB, (1) seriell, (1) Remote Control Port, (6) IEC C13 Kaltgeräte Dose Line-interactive USV Topologie Energiesparende Technologie Simulierter Sinuswellen-Ausgang Automatische Spannungsregulierung (AVR) Überlastschutz Hot-Swap-fähige Batterien Überspannungs- und Blitzschutz EMI und RFI Filter Telefon / Fax / Modem / DSL / Netzwerkschutz LCD-Statusanzeige USB-Kommunikationsanschluss PowerPanel® Verwaltungssoftware SNMP / HTTP-Fernverwaltungsfähigkeit (optional) Rackmount 19 Zoll Format https://www.cyberpower.com/de/de/product/sku/OR1500ERM1U#runtime_chart