Switches - accessories

Highlights: support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) Automatic detection of whether the connected device is PoE capable   With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets.   So you can choose the best locations for example WLAN access points installations in a building regarding the wireless technology, without having to worry about power cabling.   Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch.   The ALLNET ALL048900V2 supports the IEEE802.3af standard with a power of 15,4 Watt, the IEEE802.3at high power standard with 30 Watt and the LT PoE with 90 Watt power.   The ALL048900V2 must not be configured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total.   The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.    Technical Details:   Element Spezification Standards: IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet enhancements LT PoE 90W IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE802.ab 1000BaseT Ethernet ports: 1x RJ45 10/100/1000Mbps for connection to passive switch or hub 1x RJ45 10/100/1000Mbps for connection to PoE device LED indikators: Power / PoE Act / Status Power input: 44~57V Power consumption:   System: 5W (Max.) LT PoE++: up to 90W   Attached power adapter: Input: 100~240VAC Output: 56VDC/2A, 112W (Max.) Case: Metal case, wall-mountable Dimension: Length/Width/Height: 102 x 75 x 23 mm Weight: 280g (o. Netzteil und Verpackung) Environment: Temperature operating: 0 ~ 40 °C Humidity operating: 10% ~ 90% (non-condensing) Temperature storage: -25 ~ 90 °C  Marks: FCC Class A, CE

Gigabit non-isolated PD PoE splitter can support IEEE802.3af/at standard, compatible with 12/36 &45/78 dual mode power supply. input voltage: 44-57VDC, output voltage: 5V or 12VDC, and maximum full load power is 24W. Hightlights: Gigabit rate self-adaption, 8P copper cable RJ45 port. Support IEEE802.3af/at standard, Both mid-span ( 4/5+, 7/8- ) and end-span ( 1/2+, 3/6- ) Output voltage 5V/12VDC optional, suitable for various network terminals Input voltage 44-57VDC, rated output power 12W, greater than 82% efficiency Short circuit, over-current and over-temperature protection 2000V high voltage isolation (input stage to output stage), less than 200mV output ripple Incl. approx. 10cm long hollow plug cable on hollow plug outside= 5,5mm & inside 2,1mm for direct connection to terminals with hollow plug socket ALL-PS102G-AF-AT is a gigabit PD PoE splitter independently developed by ALLNET. It has a 1*RJ45 input port, 1*RJ45 output port, and 1*DC 5,5mm / 2,1mm socket. Its DC5V/12V output voltage selection switch is to meet the use of various non-PoE network terminals to connect to PoE switches. Effectively solving security monitoring, wireless networks, Limited by the power line layout, reduced system wiring, improved system stability and safety, and reduced maintenance costs. ALL-PS102G-AF-AT PoE splitter adopts ABS and PC flame-retardant plastic material. It complies with IEEE802.3 af/at PoE standard, end-span (1,2+, 3,6-), and mid-span (4,5+, 7,8-) two power supply modes. The output power is up to 24W. Low ripple, >82% efficiency, 2KV port protection isolation. It has short-circuit, over-current, over-temperature protection. Plug and play, no configuration, easy to use. Technical Details: Model ALL-PS102G-AF-AT Interface Characteristics Fixed Port 2*10/100/1000Base-T RJ45 ports (Data) 1*DC5521 power socket(Power) Ethernet Port Ethernet port can support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption Network Characteristics Transmission Bandwidth (Rate) 10/100/1000Mbps Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter) Output VoltageSwitch 12V: DC12Voutput voltage (default) 5V: DC5Voutput voltage Network Protocol and Indicator Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T IEEE802.3x LED Indicator PoE indicator: POE (green), Power indicator: PWR (green) PoE & Power Supply PoE Port (PD) PD port IEEE802.3af/at @ POE   IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3x Power Supply Pin 1/2 (+), 3/6 (-),& 4/5 (+), 7/8 (-) Input Voltage 44-57VDC Output Voltage Default 12VDC ±0.5V, optional 5VDC ±0.5V Power Consumption Standby<1W, Full Load<24W Conversion Efficiency (Output: Input) ≥82% Physical Parameter Operation TEMP / Humidity -20~+55°C, 5%~90% RH Non condensing Storage TEMP / Humidity -40~+85°C, 5%~95% RH Non condensing Dimension (L*W*H) 103*50*29mm Net /Gross Weight <0.08kg /<0.1kg Lightning protection / protection level Lightning protection: 4KV 8/20us; Protection level: IP30 Marks CE

* Auftragsbezogene Bestellung *,

*Auftragsbezogen, nicht Stornierbar*, 5400R-Serie,

*Auftragsbezogen, nicht Stornierbar*, 5400R-Serie,

Zyxel Zubehör 19" Rack Trageschiene für GS1920-8HPv2

* Auftragsbezogene Bestellung *,

DIN-Schienenhalterung für UniFi Compact Switches. Kompatibilität: USW-Ultra-210W USW-Flex-2.5G-8 USW-Ultra-60W USW-Ultra UACC-PoE+-USBC USW-Flex-2.5G-8-PoE

Aluminum stand accessory for the CloudKey+. Compact form factor Compatible with CloudKey+     Technical Specifications Mechanical Dimensions 134.2 x 71.7 x 43.2 mm (5.3 x 2.8 x 1.7") Weight 225 g (7.9 oz) Material Aluminum alloy

Highlights:IEEE802.3af/at StandardLT PoE++ up to 90Wbis zu 90W power outputDC Output 10-25V2x USB ports 5V/2APower over Ethernet, even if it does not support your device.The Power Over Ethernet Splitter allows your network devices such as access points, wireless cameras or switches / hubs that are not PoE capable, to provide over the CAT6 cable as the power supply wherever you need your Network devices.The ALL048700 splits before the device from the network cable in electricity and the data back on to two lines. Here, a voltage of 10V-25V (in 1V steps) is output via a rotary switch back, so this splitter can be used universally. The splitter is compatible with IEEE802.3af/at / LT PoE++ and provides even, depending on the input power up to an output power of 90 watts. In addition, two USB ports can be loaded such as Smartphones and tablets. Technical Details:  ItemSpezifikation supported standards:LT PoE++IEEE802.3af Power over EthernetIEEE802.3at Power over Ethernet enhancementsIEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE 802.3ab 1000BaseTInterfaces:1x RJ45 Input (Data and Power)1x RJ45 Output (only Data) 1x Output (only Power) Phönix contacts2x USB 2.0 5V Outputs per max. 2ALED´s:Power / PoE Act/StatusVoltage Input PoE:44~57VVoltage Output:10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25VPower Consumption:System: 2,1A (Max.120W), StandBy: typ. 1,8WHousing:Metal caseDimension:Length/Width/Height: 200 x 80 x 36 mm Weight:440g (only device)Environtment: Temperature Operating: 0 ~ 50 °CHumidity: 10% ~ 90% (non condensing)Marks:CE

* Auftragsbezogene Bestellung *,

IEEE 802.3bt compliant (PoE++ / 4PPoE), RJ45 input and output ports, up to 45W USB-C output port, plastic housing Hightlights: Charges end devices with USB-C power input such as notebooks, Macbook Pro®, tablets, smartphones from an IEEE 802.3bt/at/af PoE connection Provides Gigabit Ethernet jack for an RJ45 network capable end device PoE power budget of 45W max. at 60W input current via IEEE 802.3bt connection from PoE BT switch or injector connected in front of it Output DC5V/4A,9VDC/3A, 12VDC/3A, 15V3A, 20V2.5A Thermal shutdown Over voltage protection (OVP) Over current protection (OCP) Short circuit protection (SCP) The ALL-PS103G-BT60-PD splits the data and power from PoE to Type-C devices. It supports PoE applications in Gigabit Ethernet environments. The ALL-PS103G-BT60-PD is compliant with IEEE802.3af/at/bt power classification. Wide input voltage range, 36Vdc to 57Vdc. The maximum output power can reach 50W, and the output voltage ranges from 5V to 20V, according to the requirements of your Type-C PD end devices, such as computer, IPad, Macbook, Google Wifi, etc. Technical Details: Item Description Ports   1x 10/100/1000M RJ45 PoE Port (DATA + POWER IN) 1x 10/100/1000M RJ45 LAN Port (Only DATA) 1x Type-C USB (DC OUT)   Network Media   10Mbps: Cat 3,4,5 Unshielded Cable 100Mbps: Cat 5,5E Unshielded Cable 1000Mbps: Cat 5E, 6 Unshielded Cable   Pass Through Data Rates 10/100/1000 Mbps Power Output DC5V/3.4A, 9VDC/3A, 12VDC/3A, 15V3A, 20V2.5A Input Power Requirements IEEE802.3af 15W PoE Type 1 Class 3 IEEE802.3at 30W PoE Type 2 Class 4 IEEE802.3bt 60W PoE Type 3 Class 6 Indicators PoE ready / in-use Connectors Shielded RJ-45, EIA 568A and 568B Dimensions 80x54x24mm Environmental Conditions Operating Ambient Temperature:0 to 40? Operating Humidity: Maximum 90%, Non-condensing Storage Temperature:-20 to 70? Storage Humidity: Maximum 95%, Non-condensing Regulatory Compliance   IEEE 803.3bt (60W PoE) IEEE 802.3at (30W PoE) IEEE 802.3af (15W PoE) IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3ab (Gigabit Ethernet) RoHS Compliant, CE, FCC

J8177D,

* Auftragsbezogene Bestellung *, Stacking Topology --High Performance stacking—up to 100 Gbps of stacking throughput per switch. Each 2-port stacking module can support up to 25 Gbps in each direction per port. --Ring topology—Supports up to 10 member stack --Virtualized Switching Provides simplified management as the switches act as a single chassis when stacked

Elegante magnetische Wandhalterung für UniFi-Kompaktschalter. Kompatibilität: USW-Flex-2.5G-8 UACC-PoE+-USBC

MS700430; Hutschienen Netzteil 60 Watt 48 VDC / 1,25 A, Weitbereichseingang 85-264 VAC, äußerst kompaktes Gehäuse, IP20 · hoher Wirkunsgrad · integrierter Überspannungsschutz · Snap-On Montage auf 35 mm Hutschienen · Weitbereichseingang 85..264 VAC oder 85..375 VDC Für den äußerst anspruchsvollen Industrieeinsatz unter rauen Umgebungsbedingungen wurden von MICROSENS spezielle Kompaktstromversorgungen entwickelt. Über die bewährten Standardfeatures hinaus bietet dieses Gerät für die Anwendungen im Schaltschrank zusätzliche technische Optimierungen. Die Gestaltung des Gehäuses vergrößert die wärmeabgebende Oberfläche des Gerätes und führt in Kombination mit dem hohen Wirkungsgrad zu einer optimalen Wärmeabgabe. Die Produktpalette für den Industriebereich umfasst neben den hier beschriebenen Kompaktstromversorgungen auch Medienkonverter für Ethernet (10Base-FL/10Base-T), Fast Ethernet (100Base-FX/100Base-TX) und Umsetzer für serielle Schnittstellen (RS-232, RS-422, RS-485). Weiterhhin sind Switches für Fast Ethernet bzw. Gigabit Ethernet mit einer fehlertoleranten Glasfaseranbindung verfügbar.

24-pack of snap-in inserts that cover unused ports on the UniFi 24-Port Blank Keystone Patch Panel while maintaining its aesthetic. Easy snap-in installation Uniform aesthetic with 24-Port Blank Keystone Patch Panel (24) Keystone Blank Inserts per pack     Technical Specifications UACC-Keystone-Blank-Insert Dimensions 16.3 x 14.6 x 18 mm (0.64 x 0.57 x 0.7") Weight 1.8 g (0.06 oz) Materials Flame retardant ABS Treatment Painting Pack type 24-pack

JD095C,

JD097C,

Hutschienen Netzteil 60 Watt 24 V / 2,5 A, Weitbereichseingang 85-264 VAC, 85..375 VDC In: 3-polig Out: 5-polig

Der gewichtete Ständer mit verstellbarer Klemme hält UniFi-Geräte ohne Rack aufrecht auf ebenen Flächen.

J9581A, *Auftragsbezogen, nicht Stornierbar*

*Auftragsbezogen, nicht Stornierbar*,

Software license for resale - no copyright transfer nur für XS1930-12F, Freischaltung von Layer 3 Funktionen, AV Mode, Security Features, u.v.m