ALLNET Point-to-Point Coax 8 Port Master Chassis/Amplifier EOC 200 zbh. EOC G.hn WIFI flush-mounted box/pass-through box "ALL-GHN108S-200-UP socket

ALLNET Point-to-Point Coax 8 Port Master Chassis "ALL-GHN108M-Coax-200" without modules The distribution amplifier ALL-GHN108M-Coax is a highly integrated solution to provide a Gigabit network on 8 coaxial lines. Up to 8 G.hn modems deliver 750 Mbit or 1700 Mbit net per coaxial strand, depending on the model. A built-in power meter simplifies service during and after installation. Without compatibility to a cable network operator, even up to 1700 Mbit is available. Signal strength and skew can be digitally adjusted. If compatibility with a cable network operator is required, 750 Mbit are available. The ALL-GHN108M-Coax-200 takes care of all tasks such as filling, amplifying and splitting the TV signals as well as inserting the G.hn network data. Elaborate mounting boards / installations are not necessary. The chassis are available for EOC-Ethernet over COAX with 100MHz modules for DVB-C coexistence and as 200MHz with more bandwidth without DVB-C coexistence. Or explained differently. The EOC 100 and EOC 200 differ as follows: EOC 100 1 Gbit/650 Mbit (gross/net) see (Part No. 193132) EOC 200 2 Gbit/1.7 Gbit (gross/net) see (Part No. 221624) EOC 100 and EOC 200 - What's behind them ! The EOC 100 uses the frequency band 2-87 MHz for the transmission of data and can provide the broadband cable signal (DVB-C) from 88 to 860 MHz, so that the cable connection of your provider can still be fully used. The EOC 200 uses a frequency band of 2-199 MHz. Ideal for operators of a headend . Technische Daten ALL-GHN108M-Coax-200 Gain 33 dB (internal 48 dB) Bandwidth 1.5 GHz Ripple 1.5 dB Integrated amplifier 125 dBµV Noise figure 4 dB Noiseflor -170 dBm/Hz Integrated 8-fold splitter 8 outputs with max. 108 dBµV Return channel lock High pass and low pass filter Up to 8 G.hn modules Internal performance meter 50 dbµV to 110 dbµV Up to 64 participants/EOC1700 Remote power supply 24 V up to 40 EOC1700 Digitally adjustable: 8x 31dB attenuator (0.5 dB steps) skew correction (0-3-6-9 dB) Important: setting the output power The total band power (approx. 90 transponders) is 19.5 dB higher compared to the output power of a single transponder determined with a measuring device! You must take this into account when adjusting the total band power.   Example 1 1 transponder: 80.0 dBµV measured 90 transponders: 99.5 dbµV tape power   The LED display on the device shows 99 dBµV. Result: The input signal can be amplified (only) by 10 dB.   Example 2 1 transponder: 90.0 dBµV measured 90 transponders: 109.5 dbµV tape power   The LED display on the device shows 109 dBµV. Result: The input signal cannot be further amplified. Consideration for 5 in-wall sockets in the line: Good TV reception requires 60 dbµV - 75 dbµV at the input. One in-wall socket EOC 1000/EOC 2000 has a transmission loss of 2-3 dB and a decoupling loss of 18 dB. The AMP X8 delivers a maximum of 110 dbµV per strand.   After 5 EOC 1000/EOC 2000 in-wall sockets connected in a row is the total attenuation:   4x3 dB Transmission loss + 18 dB Decoupling attenuation + 4x1-2 dB Attenuation in the coaxial cable = 34-38 dB Total attenuation   Then an optimal setting on the ALL-GHN108M-Coax-200 would be: 60 bµV-65 dbµV + 38 dB = 98-103 dbµV. At the first in-wall socket, 12 dB would then arrive at the output, i.e. 72-77 dbµV.

The EOC 200 (ALL-GHN108S-200-UP-Dose) is an in-wall socket which supports the simultaneous transmission of Internet and Cable TV on an existing coax cable network. The installation of the in-wall socket is adding an internet connection to the existing use of cable TV on the same coax cable. It contains an integrated Gbit LAN interface and a C pass-through socket. Internet/Network data can be utilized via the Gbit Ethernet connection. The coaxial socket provides a broadband cable signal in the range of 240 MHz to 860 MHz. The TV signal gets decoupled via the coaxial socket, whereas network data is transmitted via the RJ45 socket. Interconnection of individual in-wall sockets is done automatically. The first in-wall socket is capable of supplying up to another 5 in-wall sockets. (Part No: 221626 ALL-GHN108S-200-UP-Dose  or Part No: 221627 ALL-GHN108S-200-WIFI)       The EOC 200 can be powered via remote supply by an ALL-GHN108M-Coax-200 (Amplifier), or with a 24 V/1 A power supply. Therefor it can supply four subsequent EOC 200. The EOC 200 can be installed in a single flush-mounted box, as well as in a multiple flush-mounted box. (Part No: 221626 ALL-GHN108S-200-UP-Dose  or Part No: 221627 ALL-GHN108S-200-WIFI)    Each EOC 200 can exchange data with any other flush-mounted box. (Part No: 221626 ALL-GHN108S-200-UP-Dose  or Part No: 221627 ALL-GHN108S-200-WIFI)    Video - Wiring and connection EOC in-wall socket to ALL-GHN108M-Coax-200 Amplifier Recommended application: Building upgrade with Gigabit Ethernet with existing coaxial cabling and limited budget. Home users Small company networks Hotels Hospitals Sanatoriums Retirement homes Renovation of old buildings Comparison of the Transmission Standard Standard G.Hn via COAX WLAN Powerline DOCSIS 3.0/3.1 over coax Net data rate 1,5 Gbit 240 Mbit - Wi-Fi 42 600 Mbit - Wi-Fi 52 800 Mbit - Wi-Fi 62 400 Mbit Powerline AV12002 400 Mbit Powerline AV20002 1600 Mbit/s download3 240 Mbit/s upload3 Acquisition cost medium Wi-Fi4 devices cheap Wi-Fi5 devices medium Wi-Fi6 devices expensive AV1200 devices cheap AV2000 devices medium high requires DOCSIS - CMTS server Power consumption up to 4W/GBit 6 W/GBit Access point included up to 6 W/GBit >8 W/GBit server included Susceptibility to interference not susceptible to yes, by many users yes, by electrical consumers not susceptible to Eavesdropping security yes WPA3 yes WPA2 no yes yes Visual impact small disappears in the wall medium router stands around large protrudes from the wall socket medium modem stands around 2 Source: https://de.wikipedia.org/wiki/Datendurchsatz 3 Source: https://de.wikipedia.org/wiki/Data_Over_Cable_Service_Interface_Specification Technical Details: C-throughput in-wall socket Can be integrated into single outlets and multiple outlets Frequency range 2 – 199 MHz Network standard: G.Hn Data rate Gross: 2000 Mbps Data rate Net: 1700 Mbps Attenuation 300 – 860 MHz: -2 dB (16 db coupling) Attenuation 300 – 860 MHz: -3 dB (10 db coupling) Coupling: 16 dB (other values on request) Hardware encryption : AES 128-bit Quality of Service: VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV Remote service: TR-069 remote management (option) Only suitable for DVB-C wiring Satellite wiring is not supported   Power Consumption EOC 2000 Power Consumption 50 Mbit/s 2.06 Watt 100 Mbit/s 2.27 Watt 200 Mbit/s 2.47 Watt 300 Mbit/s 2.68 Watt 400 Mbit/s 2.81 Watt 500 Mbit/s 2.90 Watt 800 Mbit/s 3.09 Watt 1000 Mbit/s 3.15 Watt