ALLNET Sunlight Pro 15-inch, 8GB/128GB, Android 12, RK3588, HDMI output, colour: black

The ALL0489v4 2.5GBASE-T PoE+ Injector provides up to 30 watts of power and a 2.5 Gigabit data connection anywhere in the network infrastructure. This device feeds DC power over a CAT5e UTP cable, increasing flexibility in positioning a PoE-enabled device when a nearby power source is lacking. It supports PoE+ standard (802.3af 15.4W & 802.3 at 30W) and up to 30W power for connected PD devices. It can easily connect to powerful devices such as VoIP phones, APs and IP cameras. The device is plug-and-play without software configuration. It supports 0?~45? Operating temperature and metal housing design, which is more suitable for various environmental applications. Provides a PoE LED status signal, which gives an easily detectable PoE connection status. Over-current and short-circuit protection are also supported to ensure safety. KEY FEATURES 10/100/1000/2500 Base-T (Data) for connection to Ethernet switch 10/100/1000/2500 Base-T PoE (Power/Data) for connection to the PoE device (PD) Auto-Negotiation Automatically detects if the connected device is PoE capable to avoid sending power to a non-PoE device. Complies with IEEE802.3, 802.3u, 802.3ab, 802.3bz, 802.3af, 802.3at standards. 802.3af (15.4W) and 802.3at (30W) PoE power output. one PoE Link LED one GND screw full range (100~240VAC) internal power supply No fan, passive cooling, small size, silent design MTBF: over 50,000 hours@45? ESD IEC61000-4-2 contact +/-4KV, air +/-8KV EFT IEC61000-4-4 power 2KV, LAN 1KV Overload protection IEC61000 4-5 cable to cable & cable to GND Level3 2KV PRODUCT SPECIFICATIONS Standard IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3bz, IEEE802.3af, IEEE802.3at Standards Interface: 1 * PoE+ 10/100/1000/2500Mbps RJ-45 port, 1 * 10/100/1000/2500Mbps RJ-45 port LED indicators: power supply (green), PoE link (green) Emission: FCC, CE, VCCI Class B Safety: CE LVD Operating temperature & humidity: 00- 450C; 10%~90% RH. Storage temperature & humidity: 20°- 70°C; 5%~90% RH. Dimension: 130 x 62 x 36 mm Switching power supply: +54V/40W, 100~240VAC input, 47~63Hz. Overload protection  

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

Highlights: 60 Watt PoE IP67 Outdoor Injector according to IEEE802.3bt Standard IP67 weatherproof & IK10 shockproof for robust outdoor installations 1x 10/100/1000M TX PoE output according to IEEE802.3af/at/bt 60W 1x AC 100~240V input voltage on 2PIN terminal (AC connection cable must be installed by customer, thus flexible in installation) Extended operating temperature: -20°C to +60°C This product is a waterproof Gigabit Power over Ethernet (PoE) device for powering most common IP end devices. The injector is fully compliant with the IEEE 802.3af/at/bt standard. The device also complies with the IP67 protection class, which means it is weatherproof and can be used outdoors without any problems. Thanks to the IK10 standard, the injector is vibration-resistant, which ensures reliable and safe use, even in industrial environments. It transmits the required electrical energy and implements the data exchange via an RJ45 cable with a maximum transmission distance of 100 metres. The injector automatically detects which PoE standard is present at the end device on the output side and regulates the voltage automatically. The injector can supply a PoE end device at the output with a maximum power of 60W according to the IEEE802.3BT standard.     Technical Details:   Technical Details: Model: ALL-PI2013OBT60 - 60W waterproof PoE injector AC to BT 60W IEEE Standard: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE802.3af for POE IEEE802.3at for POE+ IEEE802.3bt Network Media (Cable): 10BASE-T: UTP category 3,4,5 cable (≤100m)  100BASE-TX: UTP category 5 cable (≤100m)  1000BASE-T: UTP category 5e cable (≤100m) Network Connector:   1xRJ-45 10/100/1000BaseT(X) Data 1xRJ-45 10/100/1000BaseT(X) PSE with POE Output power IEEE802.3bt 60W Input current: 1,5A Max Power input: AC 100-240V 50/60Hz 2 PIN Terminal PoE Power output: 60W Max. IEEE802.3bt POE Pin Assignment RJ45: 1/2(-), 3/6(+) and 4/5(+),7/8(-) Output Voltage: DC 55V±5% Output ripple voltage: ≤200mV,Test conditions: rated input voltage, full load output, Tested with 20MHz bandwidth oscilloscope, Parallel connected a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to the output Output current: 1.1A Max. LED Indicator: PWR(Green) , PoE(Bt:Green,UPoE:orange) Dimmension: 150 x 73 x 44mm Operating Temperature: -20°C ~ 60°C Storage Temperature: -40°C ~ 80°C Surge Protection: Difference Mode:±4KV, Common mode:±6KV MTBF: <50000 hours Electrostatic standard: Contact 6KV, air 8KV Waterproof grade: IP67 Anti-hazard classification: IK10

ALLNET PoE Injektor 1G/2.5G/5G PoE & PoE bt (15,4W/30W/60W) / Kunststoffgehäuse / "ALL-PI102-5G" Highlights: Entspricht dem Standard IEEE802.3af/at/bt Multi-G Standard, Unterstützt 10/100/1000/2500/5000Mbps Unterstützt PoE-Leistung bis zu 60W Strom und Daten auf bis zu 100m Plug-und-Play, erfordert keine Konfiguration kompaktes Kunststoffgehäuse PoE Leistung 55VdC mit max. 1.1A PoE PD über 4 Paare. Our PoE Injector - Powerful and Reliable Our PoE Injector complies with the IEEE802.3af/at/bt standards and is the ideal solution to ensure power delivery to your PoE-enabled devices. Supporting speeds of 10/100/1000/2500/5000Mbps, it offers the necessary bandwidth for seamless data transmission. What sets this Injector apart is its impressive PoE power delivery of up to 60W, which is more than sufficient to power demanding devices while maintaining stable and reliable power even over distances of up to 100 meters. Installation is a breeze, as our PoE Injector is a plug-and-play device that requires no complex configuration. Its compact plastic housing provides a space-saving solution without compromising on robustness. With a PoE power delivery of 55V DC and a maximum of 1.1A PoE PD over 4 pairs, our PoE Injector offers the required power to get your devices up and running. Rely on our technology to meet your PoE requirements and optimize your network   Technical Details: Model ALL-PI102-5G Port Data in: 1x10/100/1000/2500/5000Mbps RJ45 Port PoE Out: 1x10/100/1000/2500/5000Mbps RJ45 Port Standards - IEEE802.3 10Base-T Ethernet - IEEE802.3u 100Base-Tx Fast Ethernet - IEEE802.3ab 1000Base-T Gigabit Ethernet - IEEE802.3bz 2.5GbE/5GbE NBASE-T - Full compliant with IEEE802.3af/at, PoE++ - RoHS Compliance - WEEE Compliance PoE Standard IEEE802.3af/at/bt PSE Power on RJ-45 4Pairs power lines: 1/2(-),3/6(+) 4/5(+),7/8(-) PoE Power Output 55V DC, 1,1A Max. Power supply 60W Input Power Supply AC 100-240V 50/60Hz Operation Temperature 0°C ~ 40°C Storage Temperature -20°C ~ 70°C Operation Humidity 10%~90% RH non-condensing Storage Humidity 5%~90% RH non-condensing Dimensions (L*W*H) 145,51mm x 65,8mm x 33,5mmm Weight 255g Mounting Wall-mounted IP Rated IP40 LED Indicator Power Indicator : Green - PoE Load Indicator : Green @ 30W Blue @ 30W 60W Network Media(Cable) 10BASE-T: UTP category 3, 5 cable (≤100m) 100BASE-TX: UTP category 5,5e cable (≤100m) 1000BASE-T: UTP category 5e,6 cable(≤100m) Surge Protection - Line-Earth 1.2/50us (8/20us): 2KV - Line-Line 1.2/50us (8/20us): 1KV Immunity - IEC60068-2-6(Vibration) - IEC60068-2-27(Impact) - IEC60068-2-32(Free Fall) EMS - IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) - IEC61000-4-3(RS) 10V/m(80MHz~2GHz) - IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV - IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM - IEC61000-4-6(CS) 10V(150kHz~80MHz) EMI - FCC CFR47 Part 15, EN55024, EN55032 Marks - cUL/UL - FCC - CE

Highlights: Support 1*Multigigigabit 10G PoE port (1G/2.5G/5G/10G) + 1*10G (1G/2.5G/5G/10G LAN) RJ45 port; Support IEEE802.3af (15.4w), IEEE802.3at (30w) and IEEE802.3bt (90w) Support power supply 100-240VAC Metal housing, IP20 protection rating, -20 ~ 50°C working temperature Support port surge protection: Differential mode 2KV, common mode 6KV; ESD: Contact 6KV, air 8KV. The ALLNET PoE Injector ALL-PI103MG-BT90-10G is a powerful multi-gigabit PoE injector that provides up to 90W output power per PoE port. The port supports automatic adaptation to different speeds (1G / 2.5G / 5G / 10G), allowing it to adapt flexibly to different network environments. The voltage range for the input is between 100 and 240V AC, while the operating temperature range is from -20°C to +50°C. Thanks to a robust industrial chip design, the PoE injector is particularly resistant and equipped with ESD overvoltage protection. It fulfils all relevant standards such as FCC, CE and RoHS, which ensures a high level of reliability and safety. The sophisticated hardware design ensures stable, uninterrupted operation, ideal for automation systems. The compact housing can be mounted both on walls and tables. Typical applications include PTZ cameras, compact computers, all-in-one devices, digital signage displays and other network-based systems that require high performance and reliability. Usecases: Surveillance systems This product is often used in the field of network camera surveillance, as it can provide both the data connection and the power supply for network cameras. WLAN networks The product is widely used in WLAN network projects, such as in parks or large open spaces. The PoE injector can provide wireless access points (APs) with both power and a stable data connection. Technical details: Specification Product Name ALL-PI103MG-BT90-10G Port 1*10G PoE port + 1*10G RJ45 port MultiGigabit 1G/2.5G/5G/10G PoE Specification PoE standard: IEEE802.3af/ IEEE802.3at/ IEEE802.3bt Single Port Max: 15.4W (IEEE 802.3af) Single Port Max: 30W (IEEE 802.3at) Single Port Max: 90W (IEEE 802.3bt) PoE Port Output Voltage: DC 52V PoE Power Pin: 1/2-; 3/6+ Or 4/5+; 7/8- Network Medium 100Base-TX: Cat5 or above UTP(=100m) 1000Base-TX: Cat5 or above UTP(=100m) 10000 Base-TX: Cat6 or above UTP(=100m) Indicator (PWR) On: Powered On Off: Powered Off Power Input Voltage: AC 100-240V Working Frequency: 50/60 Hz Supply Power: 52V1.73A/90W Working Environment Working Temperature: -20~50°C Storage Temperature: -40~85°C Humidity: 5%~95 % (non-condensing) Industry Standard EN61000-4-2 (ESD) IEN61000-4-5 (Surge) EN61000-4-3 (RS) EN61000-4-6 (CS) EN61000-4-4 (EFT) Physical structure Protection Grade: IP20 Install: Wall Mounting Product N.W: 0.486KG Product G.W: 0.712KG Product Size (L*W*H): 187* 95*40 mm Package Size (L*W*H): 245*190*60mm Package List 10G 90W PoE Injector: 1pcs User Manual: 1pcs Certificate, Warranty Card:1pcs