ALLNET RJ45 fuse coupling, ejector socket, PoE capable, up to 10 Gbit in ABS housing With this coupling, you can easily and effectively protect your valuable IT devices from damage. The two parts are held in place by magnetic contacts and release if the tensile load is too high. This prevents RJ45 sockets from being torn out and devices from being destroyed through carelessness. This safety product from ALLNET has been specially developed for our hospitality customers and IT system users. The standard specifications for the ejection force of RJ45 plugs and sockets in accordance with IEC 60603-7 are higher than those of our ejector socket. This ensures that the connection between the two magnetic couplings always falls apart before any damage occurs to the device. Unintentional loosening of the magnetic connection is nevertheless not possible. You can continue to use the existing infrastructure, as the plug supports all types of RJ45 plugs, from Cat5-Cat6a, PoE according to IEEE 802.3 af/at/bt (90Watt) and up to 10GBit. Protect your devices! This device complies with EC Directive 2002/95/EC (RoHS). One set in PE bag with QIG Description: Specification: RJ45 / RJ45 safety coupling with magnetic contacts Power over Ethernet according to IEEE 802.3 af/at/bt -90 watts Average mating cycles RJ45:  >= 750 Socket in accordance with connector standard IEC 60603-7-51 Data transfer rate: up to 10 GBit  IEEE 802.3an Data transmission: bidirectional, full duplex Adapter type: inactive Humidity 10-90% Temperature range: -20°C to 85°C Connection 2xRJ45  Connectors: Neodymium  pogo pins 2x4-pin Socket material: ABS plastic Material of the housing cover: ABS Colour of the housing: white Weight: 30g ALLNET has applied for and received German utility model protection for this safety clutch. Scope of delivery: 1x drop connector (2-part) ABS housing 1x patch cable RJ45, CAT6 250Mhz, 0.15m white, UTP(U/UTP), Synergy 21,   1x function test report created with Cable-Eye device

ALLNET RJ45 fuse coupler 50s bulk, drop socket, PoE capable, up to 10GBit in ABS housing. With this coupler you can easily and effectively protect your valuable IT equipment from damage. The two parts are fixed by magnetic contacts and will release if the tensile load is too high. This prevents RJ45 jacks from being torn out and devices from being destroyed by carelessness. This security product from ALLNET was developed especially for our hospitality customers and IT system houses. The standard specifications for the release force of RJ45 plugs and sockets according to IEC 60603-7 is higher than that of our drop socket. This ensures that the connection between the two magnetic couplings always falls apart before any damage to the device occurs. Nevertheless, an unintentional disconnection of the magnetic connection is not possible. You can continue to use the existing infrastructure, because the connector supports all types of RJ45 connectors, from Cat5-Cat6a, PoE according to IEEE 802.3 af/at/bt (90Watt) and up to 10GBit. Protect your devices! This device complies with EC Directive 2002/95/EC (RoHS). One set in PE bag with QIG Description:     Specification: RJ45 / RJ45 safety coupler with magnetic contacts.     Power over Ethernet according to IEEE 802.3 af/at/bt -90 Watt     average mating cycles: >= 750     Socket according to connector standard IEC 60603-7-51     Data transfer rate: up to 10 GBit IEEE 802.3an     Data transfer: bidirectional, full duplex     Adapter type: inactive     Humidity 10-90     Temperature range: -20°C to 85°C     Connector 2xRJ45     connectors: Neodymium pogo pins 2x4-pin     Material socket: ABS plastic     Material of housing cover: ABS     Housing color: white     Weight: 30g Scope of delivery: 1x ejector plug (2-piece) ABS housing

Highlights:   Plug and Play installation Reliable surge protection for all devices with a network connection: • Switche, Router, Firewall, xDSL Modem, ISDN, NoteBook, PC / Server • Television • Multimedia Devices Protect your network equipment from power surges by lightning The ALLNET ALL95100 provides a cost-effective and reliable protection against damage to sensitive equipment. Housed in a compact body the ALLNET surge protection is simply inserted between the network cable or xDSL / ISDN connection and the equipment to be protected.   Without con guration the device is immediately protected from power surges. Along with a regular surge protector and bonding can be for example the infrastructure in safety-relevant areas permanently protected. Not only indoors, but also particularly like the outside, the ALL95100 is used effectively in conjunction with PoE enabled IP Cam‘s and wireless access points. Technical Details: Element Spezifikation Network Interface: 2x RJ45 10/100/1000Mbps PoE-Capability: IEEE802.3af, at, LTPoE++ bis 90W Arrest capacity: 10kA (8/20µs), 100A (10/1000µs) Ignition voltage: 90VDC ±20% (Pair to Earth) <450V (bei 100V/µs) <600V (bei 1kV/µs) Diff. Clamping: <15V, <5ns, 30Apk (Pair wire to wire) Diff. Capacity: <4.0pF Lines protected: (Pins)1 - 8 (at 8 pin modular plug) Test mark: IEEE 802.3, CAT 5, 6 ESD Protection: IEC 61000-4-2 class 4 (10kV CD) Housing: metal case Enviroment: Temperature operating: -15 ~ 40 °C Humidity operating: 10% ~ 95% (non condensed) Marks: CE, RoHS Maße: 82 x 25 x 25 mm (Length x Width x Height) weight: 200 Gramm Package content: -ALLNET ALL95100 -QIG

ALLNET TP Cat 6 Überspannungs-/Blitzschutz Surge Protector ALL95102O Outdoor IP66 Highlights:     Plug and play mounting     IP66 outdoor weatherproof enclosure     Reliable protection against surges of all devices with network connection Protect your network devices from lightning surges The ALLNET ALL95102O is the new IP66 weatherproof surge protector from ALLNET.  The ALL95102O offers reliable protection against damage to sensitive devices. The ALLNET surge protector, which is housed in an IP66 weatherproof housing, is simply plugged in between the network cable and the device to be protected. It immediately takes over the protection of the device against overvoltage without any configuration. Together with a regular surge protection and equipotential bonding, the infrastructure in safety-relevant areas, for example, can be permanently protected. If the overvoltage is too high, the unit breaks down and has to be replaced! Fields of application:     Outdoor IP cameras     Outdoor WiFi-Accespoints     LoRa outdoor gateways / helium miners     Any outdoor devices with a LAN connection Technical Details: Element Spezifikation Network Interface: 2x RJ45 10/100/1000Mbps PoE-Capability: IEEE802.3af, at, LTPoE++ bis 90W Arrest capacity: 10kA (8/20µs), 100A (10/1000µs) Ignition voltage: 90VDC ±20% (Pair to Earth) <450V (bei 100V/µs) <600V (bei 1kV/µs) Diff. Clamping: <15V, <5ns, 30Apk (Pair wire to wire) Diff. Capacity: <4.0pF Lines protected: (Pins)1 - 8 (at 8 pin modular plug) Test mark: IEEE 802.3, CAT 5, 6 ESD Protection: IEC 61000-4-2 class 4 (10kV CD) Housing: IP66 Outdoor metal case Enviroment: Temperature operating:-40° ~ 80 °C Humidity operating: 10% ~ 95% (non condensed) Marks: CE, RoHS Maße: 200 x 75 x 45 mm (Length x Width x Height) weight: 329 Gramm (Device only) Package content: -ALLNET ALL95102 -QIG