Fanvil FH-S01, SIP Ceiling Speaker / SIP

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

ALLNET PoE Injector Industrial Gigabit / PoE BT (15.4W/30W/90W) / DIN / metal housing / "ALL-PI2014-I-BT90" Highlights: 1 RJ45 Ethernet data input + 1 RJ45 Power over Ethernet output (Data + Power) 90W LTPoE++ power sourcing equipment support DIN rail and wall mounting bracket 48~57VDC terminal block for optional external power supplies (NOTE: POWER SUPPLY IS NEEDED) Supports 10/100/1000Base-TX IEEE802.3at PoE+ compatible Extensive LED indicators for PoE diagnostics -40°C to +75°C operating temperature Ensure the reliable power supply of your PoE devices with the ALLNET PoE Injector Industrial Gigabit, model "ALL-PI2014-I-BT90." This high-quality PoE injector offers a range of features to optimize your network infrastructure. Here are some of the highlights: Data and Power Over a Single Cable: The injector features one RJ45 Ethernet data input and one RJ45 Power over Ethernet output. This allows you to transmit both data and power over a single Ethernet cable, simplifying your cabling. Powerful PoE: With support for 90W LTPoE++ (Low-Temperature Power over Ethernet), this injector is capable of supplying ample power to even high-power PoE devices. Versatile Mounting Options: The injector can be mounted on DIN rails and walls, providing flexibility in installation. Optional External Power Supplies: For added flexibility, the injector includes a 48~57VDC terminal block for optional external power supplies. Note that an external power supply needs to be purchased separately. Gigabit Speed: The injector supports 10/100/1000Base-TX, making it compatible with both Gigabit and standard Ethernet networks. PoE+ Compatible: It is IEEE802.3at PoE+ compatible, enabling the power supply of PoE+ devices. Comprehensive Diagnostics: The extensive LED indicators offer a quick and easy way to monitor the status of PoE power delivery and conduct diagnostics. Robust Design: With an operating temperature range of -40°C to +75°C, this PoE injector is suitable for use in demanding environments. The ALLNET PoE Injector Industrial Gigabit / PoE BT (model "ALL-PI2014-I-BT90") is the ideal solution to reliably power your PoE devices and operate your network smoothly and efficiently.   Technical Details: Model ALL-PI2014-I-BT90 Standards Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE802.3 x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt 4-pair Power over Ethernet Plus Plus Fixed Port Ethernet in:1x10/100/1000Base-TX RJ45 PoE out:1x10/100/1000Base-TX PoE++ PSE RJ45 Power in:1x48~57VDC,Max 2A (3 Pin Terminal Block) Network Medium 10BASE-T: Cat3,4,5 UTP(≤100 meters) 100BASE-TX: Cat5 UTP or better(≤100 meters) 1000BASE-TX: Cat5e,6 UTP or better(≤100 meters) PoE Description PoE Standard:IEEE802.3af/at/bt PSE PoE Pin Assignment:1/2/4/5+,3/6/7/8-(4-Pair) PoE Distance:Max 100m(Cat5e/Cat6) PoE Power Output:Max 90W(DC52-57V,1.73A) LED Indicator PWR:Lights to indicate the injector has power input PoE:Lights to indicate the injector is providing PoE power 25%,50%,75%,100%(PoE Power Usage Indicator): 25%:off to indicate the PoE power usage is less than 25%,blinks to indicate the PoE power usage is around 0-24%,lights to indicate the PoE power usage is more than 25% 50%:blinks to indicate the PoE power usage is around 26-49%,lights to indicate the PoE power usage is more than 50% 75%:blinks to indicate the PoE power usage is around 51-74%,lights to indicate the PoE power usage is more than 75% 100%:blinks to indicate the PoE power usage is around 76-99%,lights to indicate the PoE power usage is at the maximum Mechanical Case: IP30 Slim type metal case Cooling way: Natural cooling,fanless design Dimension: 110x98x31mm(LxWxH) Weight: 0.35Kg Installation:DIN-Rail / Wall-mount Protection 6KV 8/20u lighting protection 6KV ESD protection under-voltage,over-voltage,over-current and short circuit protection Environmental Working Temperature: -40°C to +80°C Storage Temperature:-40°C to +85°C Working Humidity: 10%~90% (non-condensing) Storage Humidity: 5% ~ 90%(non-condensing) MTBF 100,000 hours

 ALLNET PoE Injektor Industrial MultiGigabit • PoE BT mit Power-Booster (15,4W/30W/90W) • DIN • ALLNET PoE Injekt Metallgehäuse • ALL-PI2015MGPB-BT90 Highlights: Support 1x10M/100M/1G/2.5G/5G/10GBase-T Ethernet Data Input RJ45 Port +1xDC12-57V Input Power Port+1x10M/100M/1G/2.5G/5G/10GBase-T PoE PSE Output RJ45 Port Complies with IEEE 802.3af/at/bt PoE/PoE+/PoE++ PSE standard Supports PoE power up to 90 watts for PoE++ port Auto detects IEEE 802.3af/at/bt PoE/PoE+/PoE++ end-span/mid-span compliant PD device,which can protect devices from being damaged by incorrect installation LED indicators monitors the status of the total PoE usage in real time Remote power feeding up to 100m Support 12~57VDC power input with integrated Power Booster IP30 slim metal case  Solid DIN-rail or wall mount design Supports 6KV Surge and ESD protection -40 to +80°C operating temperature ALLNET ALL-PI2015MGPB-BT90 is a Industrial Single-Port 802.3bt PoE++ Injector with a maximum of up to 90 watts of power output over Ethernet cables. It is also equipped with two 10M/100M/1G/2.5G/5G/10GBase-T RJ45 copper interfaces to handle extremely large amounts of data transmission.The ALL-PI2015MGPB-BT90, adopting the IEEE 802.3bt standard, instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), provides the capability to source up to 90 watts of power by using all the four pairs of standard Cat. 5e/6 Ethernet cabling.Backward compatible with both 802.3af/at PoE standards, the ALL-PI2015MGPB-BT90 allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The ALL-PI2015MGPB-BT90 frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.  Application:  Installations: DIN rail installation This product can be installed on a DIN rail. The installation steps are as follows:               Installation on a wall bracket This product can also be installed on a wall bracket. The installation steps are as follows:    Dimmension: Technical Details: Model ALL-PI2015MGPB-BT90 Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3bz 2.5G/5GBase-T IEEE 802.3an 10GBase-T IEEE802.3x flow control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Type 4 Power over Ethernet Plus Plus Fixed Port Ethernet in:1x10M/100M/1G/2.5G/5G/10GBase-T RJ45 PoE out:1x10M/100M/1G/2.5G/5G/10GBase-TX PoE++ PSE RJ45 Power in:1x12~57VDC,Max 10A(3 Pin Terminal Block) Booster efficiency:85%-97% Network Cable Twisted-pair cable up to 100 meters (328ft) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6, 6A 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6, 6A 1G/2.5G: 4-pair UTP Cat 5e/Cat 6/Cat 6A/ Cat 7 5G: 4-pair UTP Cat 6/Cat 6A/Cat 7 10G:4-pair UTP Cat 6A/Cat 7 PoE Description PoE Standard:IEEE802.3af/at/bt PoE/PoE+/PoE++ PSE PoE Pin Assignment:1/2/4/5+,3/6/7/8-(4-Pair) PoE Power Output:Max 90W(DC52-57V,1.73A) LED Indicator PWR:Lights to indicate the injector starts normally,when the power supply input voltage within 12~57VDC,this indicator will be solid on. PoE:Lights to indicate the injector PoE can work normally,for ALL-PI2015MGPB-BT90,when power supply input voltage within 12~57VDC,this indicator will be solid on 25%,50%,75%,100%(PoE Power Usage Indicator): 25%:off to indicate the PoE power usage is less than 25%,blinks to indicate the PoE power usage is around 0-24%,lights to indicate the PoE power usage is more than 25% 50%:blinks to indicate the PoE power usage is around 26-49%,lights to indicate the PoE power usage is more than 50% 75%:blinks to indicate the PoE power usage is around 51-74%,lights to indicate the PoE power usage is more than 75% 100%:blinks to indicate the PoE power usage is around 76-99%,lights to indicate the PoE power usage is at the maximum Mechanical Case: IP30 Slim type metal case Cooling way: Natural cooling,fanless design Dimension: 110x98x31mm(LxWxH) N.W/G.W: 0.35Kg/0.46Kg Installation:DIN-Rail/Wall-mount Protection 6KV 8/20u lighting protection 6KV ESD protection under-voltage,over-voltage,over-current and short circuit protection Environmental Working Temperature: -40°C to +80°C Storage Temperature:-40°C to +85°C Working Humidity: 10%~90% (non-condensing) Storage Humidity: 5% ~ 90%(non-condensing) MTBF 100,000 hours

ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 19" • Fanless • ALL-SG8310v2PM Highlights: 8-port 10/100/1000Mbps with full PoE support 2x SFP slots for optional MiniGBICS PoE power 4x a' 30 Watt (IEEE802.3at or 8x IEEE802.3af) FANLESS DESIGN with internal power supply unit Jumbo Frames and IGMP Snooping Support Link Aggregation and Rapid Spanning Tree IEEE802.1q VLAN tagging and 802.1p priority queues PoE budget 140 W The ALL-SG8310v2PM is an 8-port 10/100/1000Mbps switch with PoE support on all ports, perfect for segmenting larger networks. It is an excellent choice to provide your network with more power and efficiency. IEEE 802.3af&at Power over Ethernet (PoE). The ALL-SG8310v2PM supports IEEE 802.3at PoE standard on 4 ports ports with up to 30W power per port for the connected PoE end devices, or full IEEE802.3af power on 8 ports with up to 15.4W. The maximum PoE budget is 140W. The ALL-SG8310v2PM uses the existing LAN cabling for the power supply. This facilitates the installation of PoE end devices such as WLAN access points, IP cameras, VoIP telephones and much more, as no consideration has to be given to power sockets during placement. The PoE ON/OFF function allows the administrator to conveniently reset the end devices remotely by turning off the PoE power supply for each individual port. High-Speed Networking/Jumbo Frames Support The ALL-SG8310v2PM provides an excellent solution for expanding your Gigabit network. With Gigabit speed, this product offers high flexibility and bandwidth for connectivity to servers, workstations and other connected devices. In addition, it also supports 9.6K jumbo frames for better network utilization, which greatly improves the transfer of large files. Extensive management/administration features Modern applications for video surveillance with IP cameras and Voice over IP are increasingly replacing classic analog technologies. This also increases the demands on the network infrastructure. The ALLNET ALL-SG8310v2PM is equipped with many management and security functions for all modern communication scenarios. IGMP Snooping, Tagged VLAN, Quality of Service, Port Trunking, Flow Control, Storm Control, Link Aggregation, IEEE802.1x, SNMP v1/ v2c and Spanning Tree are only a small excerpt from the extensive feature portfolio of the ALL-SG8310v2PM. For more details see Technical Details.  Technical Details: Items Specifications Model No. ALL-SG8310v2PM Key Components RTL8382M Flash IC:16MB DDR: 1Gb IP808AR PSE controller I/O ports 8x GbE ports, RJ45 2 x SFP Giga ports Reset Button: reset to default setting, re-start system Console port by RTJ45 Type PoE ports Port# 1~ 8 IEEE802.3at, IEEE802.3af LED Define PWR/SYS: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE Max power Alert On: Over PoE Max power Alert Port LED: Link/ACT: Off: port disconnected or link fail Green on: 10/100/1000Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on SFP:          - Off: disconnected or fail          - Green: 100/1000Mbps connected          - Blinking: data transmitting HW feature IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3az EEE IEEE802.3at, IEEE802.3af MAC address Table: 8K Packet buffer size: 4.1M Jumbo Frame: 9K bytes Console Support Cisco-like CLI command Security DT Security circuit. PoE power pin-out Alternative A (Pin 1,2/3,6) PoE Output power capacity Maximum output :30W per each port Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discover the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable Power Input Internal power supply Input: 100-240V AC Output: 180W PoE Power Budget 140W Reset button Support reset to default configuration Dimension 265(W) x 183(D) x 44(H) mm FAN Design Fan-less Temperature Operating: 0 ~ 40? Storage : -40 ~ 70? Humidity Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing)   Software Features Status System Information     Logging Message     Port Statistics   Error Disabled   Bandwidth Utilization   Link Aggregation     MAC Address Table 8K   Network IP Address Static / Dynamic   System Time SNTP / From Computer / Manual Time   Port Port Setting State / Speed / Duplex / Flow Control   Error Disabled Recovery Interval ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood Link Aggregation Group   Port Setting State / Speed / Flow Control LACP   EEE     Jumbo Frame 9K Byte   PoE Global Setting Schedule Status   Priority Setting     Power Limit     Power Show     VLAN VLAN Create VLAN   VLAN Configuration   Membership   Port Setting   Voice VLAN Property   Voice OUI   Protocol VLAN Protocol Group   Group Binding   MAC VLAN MAC Group   Group Binding   Surveillance VLAN Property   Surveillance OUI   GVRP Property   Membership   Statistics   MAC Address Table Dynamic Address Aging Time   Static Address     Filtering Address     Spanning Tree Property State / Operation Mode / Path Cost / BPDU Handling Operation Mode : STP/RSTP/MSTP Port Setting     MST Instance     MST Port Setting     Statistics     Discovery LLDP Property   Port Setting   MED Network Policy   MED Port Setting   Packet View   Local Information   Neighbor   Statistics   Multicast General Property Unknown Multicast Action / Multicast Forward Method Group Address   Router Port   Forward All Table   Throttling   Filtering Profile   Filtering Binding   IGMP Snooping Property State / Version / Report Suppression Querier   Statistics   MLD Snooping Property State / Version / Report Suppression Statistics   MVR Property State / VLAN / Mode / Group Start / Group Count / Query Time Port Setting   Group Address     Security RADIUS     TACACS+     AAA Method List   Login Authentication Console / Telnet / SSH / HTTP / HTTPS Management Access Management VLAN   Management Service Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout Management ACL   Management ACE   Authentication Manager Property   Port Setting   MAC-Based Local Account   WEB-Based Local Account   Sessions   Port Security     Protected Port     Storm Control   State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown) DoS Property   Port Setting   Dynamic ARP Inspection Property   Statistics   DHCP Snooping Property   Statistics   Option82 Property   Option82 Circuit ID   IP Source Guard Port Setting   IMPV Binding   Save Database   ACL MAC ACL     MAC ACE     IPv4 ACL     IPv4 ACE     IPv6 ACL     IPv6 ACE       ACL Binding     QoS General Property CoS / DSCP / CoS-DSCP / IP Precedence Queue Scheduling Strict Priority / WRR CoS Mapping   DSCP Mapping   IP Precedence Mapping   Rate Limit Ingress / Egress Port   Egress Queue   Diagnostics Logging Property Console / RAM / Flash Remote Server   Mirroring     Ping     Traceroute     Copper Test     Fiber Module     UDLD Property Message Time Neighbor   Management User Account     Firmware Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Active Image Active Image  / Backup Image Configuration Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Save Configuration Source File / Destination File, Restore Factory Default SNMP View   Group   Community   User   Engine ID   Trap Event Authentication Failure / Link UP_Down / Cold Start / Warm Start Notification   RMON Statistics     History     Event     Alarm      

ALLNET Switch full managed Layer2+ 10 Port • 8x GbE • PoE Budget 130W • 8x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8610PMJ Highlights: 8-port 10/100/1000Mbit/s with full PoE support 2x SFP slots for optional MiniGBICS PoE power 4x a´ 30 watts (IEEE802.3at or 8x IEEE802.3af) LÜFTERLESS DESIGN with internal power supply Supports L2+ switching functions such as 802.1Q VLAN, mirroring, port isolation, IGMP snooping, DHCP snooping, LLDP, POE+ management, IP source guard, ARP inspection, ACLs etc. Support of Spanning Tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1s). Support of extended management via WEB, CLI, TELNET, SSH, SNMP. Support for cable diagnostics and SFP DDM. Supports PoE management, such as PoE schedule, PoE PD Alive. Supports G.8032 quick ring protocol. Self-recovery time <20ms. Supports DDM, SFP digital diagnostics & monitoring Support of IPV4 and IPV6 functions for static routing Support of memory and CPU monitoring 4KV overvoltage protection, 6KV contact/8KV air protection PoE budget 130 W NEW: PoE & LAN JSON Java script notation API for ON/OFF via remote Product description: The ALL-SG8610PM is a fully managed Layer 2+ Gigabit PoE switch that features intelligent PoE capabilities to improve the availability of critical business applications. It offers IPv6/IPv4 management and an integrated L2+ Gigabit switching engine together with 8*10/100/1000BASE-T ports with 30 Watt 802.3at PoE+ and 2 Gigabit SFP slots. With a total power budget of up to 130 W for various types of PoE applications, it offers fast, secure and cost-effective Power over Ethernet network solutions for IP surveillance in small businesses and enterprises. The ALL-SG8610PM is programmed for advanced switch management features such as 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping and MLD Snooping. In addition, the Link Layer Discovery Protocol (LLDP) is included as a layer 2 protocol to determine basic information about neighbouring devices in the local broadcast domain.   Extensive PoE management function As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8610PM has the following special PoE management functions:   PoE PD alive check Timed rebooting of the power supply PoE schedule Monitoring of PoE utilisation Soft reboot PoE non-stop Prioritisation of the PoE port feed-in Intelligent PD alive check for frozen PDs The ALL-SG8610PM industrial PoE switch with 24 ports can be configured to monitor the status of the connected PDs in real time. As soon as the PD stops working and responding, the ALL-SG8610PM restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is significantly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator. PoE schedule function for energy saving To protect the environment, the AALL-SG8610PM Switch Ethernet PoE can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals, and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The intelligent PoE switch ALL-SG8610PM allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8610PM supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.   Strong layer 2 functions The ALL-SG8610PM Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SG8610PM enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SG8610PM is equipped with console, web and SNMP management interfaces. With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option. For text-based management, access is possible via Telnet and the console port. For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session. Intelligent PoE switch with SFP DDM function The ALL-SG8610PM supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.    JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.   PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical data: Model ALL-SG8610PM Copper Ports 8-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Fibre ports 2x1G BASE-X SFP interfaces, supports 100M/1G Mbps dual mode PoE ports 1~8-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-forward Switch Fabric 20 Gbps/non-blocking Throughput 14.88Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 bytes SDRAM 1Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power supply 100~240V AC, 50/60Hz, 4A (max.) Power consumption Max.150 watts/1122 BTU PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) PoE budget 130W LED Indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 interfaces (Port 1 to Port 8): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP interfaces (Port 9 to Port 10): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP(Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate limiting (Ingress/Egress) Stri Priority Security features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload  Dual firmware LLDP Configuration Export/Import                                CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 280x213x44.5mm Weight 2 kg Working Temperature -10°C to 45°C Storage Temperature -20°C to 70°C MTBF 50,000hrs

ALLNET Switch smart managed Layer2 18 Port Gigabit • 18x GbE • PoE Budget 240W • 16x PoE at • 2x SFP • 19" • Fanless • ALL-SG8418PM Highlights: 18 port Gigabit non-blocking switch architecture 16x PoE ports according to IEEE802.3af/at standard 2x 1GbE SFP ports for optional GBIC modules VLAN Port-Based / Tagged Based Link Aggregation ( IEEE802.3ad LACP & Static Trunk) IGMP Snooping QoS (QoS>QoS multi-label, queue config, QoS mapping) Totally fanless, no more annoying noises... max. 240W budget 19" bracket included  PoE budget 240W  Supports Endspan POE = Endspan (1/2 and 3/6) Discover the new ALLNET ALL-SG8418PM Switch – the ideal solution for small and medium-sized workgroups requiring fast and reliable network connectivity. With 16 backward-compatible Gigabit PoE ports, this switch provides powerful connectivity for your PoE-enabled devices. Thanks to its fanless design, the ALL-SG8418PM is perfect for office environments, generating no disruptive noise. It is smart-manageable and supports various standards such as QoS, VLAN, Storm-Control, and IGMP Snooping, ensuring the highest performance and security in your network. The robust metal housing of the switch is suitable for both mounting in a 19-inch rack and wall mounting. Additionally, the ALL-SG8418PM features 2x SFP miniGBIC slots to connect remote servers or uplink devices via fiber optic cables. Choose the ALLNET ALL-SG8418PM Switch and experience seamless network connectivity without compromising on performance and reliability. Mechanical Drawings: Front-Panel:   Technical Details: Items Specifications Model No. ALL-SG8418PM Key Components RTL8382M+RTL8218D IP808ARx2 PSE controller DDR:1Gb Flash IC:16MB I/O ports 16x GbE ports, RJ45 2x SFP Giga Ports Reset Button: reset to default setting, re-start system PoE ports Port# 1~ 16 IEEE802.3at, IEEE802.3af LED Define PWR/SYS: Green LED Off: power off or fail On: power on ALM: Red LED Off: Switch is normal condition On: Alarm for system failure because of overheat, wrong voltage. PoE Max.: Green LED Off: No over PoE max power Alert On: Over PoE max power Alert Port LED Link/ACT: Green Off: port disconnected or link fail Green on: 10/100/1000Mbps connected Blinking: sending or receiving data PoE: Green LED Off: PoE power output off Green on: PoE power output on SFP Port: Off: disconnected or fail Green: 100/1000Mbps connected Blinking: data transmitting HW feature IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3x flow control & back pressure IEEE802.3z 1000Base SX/LX IEEE802.3az EEE IEEE802.3at, IEEE802.3af Switch Capacity: 36Gbps bi-direction Forwarding Mode: Store and Forward MAC address Table: 8K Packet buffer size: 4.1M bit Jumbo Frame: 9K bytes Power Input Internal power supply Input: 100-240V AC Output: 280W E-cap life time >3 years @ 40? PoE power pin-out Alternative A (Pin 1,2/3,6) PoE Output power capacity Maximum output :30W per each port Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discover the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority can be configured and default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable PoE Power Budget 240Watt Reset button Support reset to default configuration Dimension 441mm(W)x190mm(D)x44mm(H) FAN Design N/A Temperature Operating: 0 ~ 40? Storage : -40 ~ 70? Humidity Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing)   Software Feature Status System Information     Logging Message     Port Statistics   Error Disabled   Bandwidth Utilization   Link Aggregation     MAC Address Table   8K   Network IP Address Static / Dynamic   System Time SNTP / From Computer / Manual Time   Port Port Setting State / Speed / Duplex / Flow Control   Error Disabled Recovery Interval ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood Link Aggregation Group   Port Setting State / Speed / Flow Control LACP   EEE     Jumbo Frame 9K Byte   PoE Global Setting Schedule Status   Priority Setting     Power Limit     Power Show     VLAN VLAN Create VLAN   VLAN Configuration   Membership   Port Setting   Voice VLAN Property   Voice OUI   Protocol VLAN Protocol Group   Group Binding   MAC VLAN MAC Group   Group Binding   Surveillance VLAN Property   Surveillance OUI   GVRP Property   Membership   Statistics   MAC Address Table  Dynamic Address Aging Time   Static Address     Filtering Address     Spanning Tree Property State / Operation Mode / Path Cost / BPDU Handling  Operation Mode : STP/RSTP/MSTP Port Setting     MST Instance     MST Port Setting     Statistics     Discovery LLDP Property   Port Setting   MED Network Policy   MED Port Setting   Packet View   Local Information   Neighbor   Statistics   Multicast General Property Unknown Multicast Action / Multicast Forward Method Group Address   Router Port   Forward All Table   Throttling   Filtering Profile   Filtering Binding   IGMP Snooping Property State / Version / Report Suppression Querier   Statistics   MLD Snooping Property State / Version / Report Suppression Statistics   MVR Property State / VLAN / Mode / Group Start / Group Count / Query Time Port Setting   Group Address     Security RADIUS     TACACS+     AAA Method List   Login Authentication Console / Telnet / SSH / HTTP / HTTPS Management Access Management VLAN   Management Service Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout Management ACL   Management ACE   Authentication Manager Property   Port Setting   MAC-Based Local Account       WEB-Based Local Account   Sessions   Port Security     Protected Port     Storm Control   State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown) DoS Property   Port Setting   Dynamic ARP Inspection Property   Statistics   DHCP Snooping Property   Statistics   Option82 Property   Option82 Circuit ID   IP Source Guard Port Setting   IMPV Binding   Save Database   ACL   MAC ACL     MAC ACE     IPv4 ACL     IPv4 ACE     IPv6 ACL     IPv6 ACE     ACL Binding     QoS General Property CoS / DSCP / CoS-DSCP / IP Precedence Queue Scheduling Strict Priority / WRR CoS Mapping   DSCP Mapping   IP Precedence Mapping   Rate Limit Ingress / Egress Port   Egress Queue   Diagnostics Logging Property Console / RAM / Flash Remote Server   Mirroring     Ping     Traceroute     Copper Test     Fiber Module     UDLD Property Message Time Neighbor   Management User Account      Firmware Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Active Image Active Image / Backup Image Configuration Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP)     Save Configuration Source File / Destination File, Restore Factory Default SNMP View   Group   Community   User   Engine ID   Trap Event Authentication Failure / Link UP_Down / Cold Start / Warm Start Notification   RMON Statistics     History     Event     Alarm    

ALLNET Switch smart managed Layer2 24 Port • PoE Budget 370W • 24x PoE at • 4x SFP • 19" • ALL-SG8428v2PM Highlights: 24 Port Gigabit non-blocking Switch Architektur Unterstützt NWay Protocol (10/100/1000Mbps) und Duplexmodus (half/full) Auto Detektion support back-pressure (half duplex), flow control (IEEE 802.3x und IEEE 802.3az Energy Efficient Ethernet VLAN: Port basiert / Tagged basiert Link Aggregation (IEEE802.3ad LACP) IGMP Snooping (v1/v2) QoS (Port Based, Flow, 802.1p, IP-TOS, IP DSCP) Stormcontrol (Broadcast, Multicast, Unicast) 370W PoE Budget unterstützt PoE IEEE802.3af/at PSE-Devices The new ALLNET ALL-SG8428v2PM switch provides an optimal basis for small and medium-sized workgroups with high network and data traffic and enables fast data transmission in the network. With a total of 24 downward-compatible Gigabit ports, the connected computers and servers are reliably and powerfully interconnected. The ALL-SG8428v2PM can pass a maximum PoE budget of 370W to the end devices through the internal 450W power supply. The 24 Gigabit PoE ports support the PoE standard IEEE802.3af and the IEEE802.3at standard. 2 fans are installed on the side of the switch. Mechanical Drawings: Technischical Details: Items Specifications Model No. ALL-SG8428v2PM Key Components RTL8382M+RTL8218Dx2+RTL8214FC Flash IC:16MB DDR: 1Gb IP808ARx3 PSE controller I/O ports 24x GbE ports, RJ45 4 x port GbE SFP/RJ45 combo Reset Button: reset to default setting, re-start system PoE ports Port# 1~ 24 IEEE802.3at, IEEE802.3af LED Define PWR/SYS: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE Max power Alert On: Over PoE Max power Alert ALM: Red LED Off: Switch is normal condition On: Alarm for system failure because of overheat, wrong voltage, Fan failed. Port LED: RJ45: Off: port disconnected or link fail Green on: 10/100/1000Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on SFP: - Off: disconnected or fail - Green: 100/1000Mbps connected - Blinking: data transmitting HW feature IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3az EEE IEEE802.3x IEEE802.3z IEEE802.3at, IEEE802.3af MAC address Table: 8K Packet buffer size: 4.1M Jumbo Frame: 10K bytes 56Gbps switching capacity Forwarding rate: 41.66Mpps (64-byte package size) Data Transfer Rate Ethernet:10 Mbps (half duplex),20 Mbps (full duplex) Fast Ethernet:100 Mbps (half duplex),200 Mbps (full duplex) Giga Ethernet:2000 Mbps (full duplex) PoE power pin-out Alternative A (Pin 1,2/3,6) PoE Output power capacity Maximum output :30W per each port Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discover the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable System Monitor HW Monitor IC: ADT7476 Voltage Monitor Input Voltage: 12V (+/-7% Alarm Threshold) I/O Voltage: 3.3V (+/- 5% Alarm Threshold) DDR Voltage: 1.5V (+/- 5% Alarm Threshold) PHY Voltage: 1.1V (+/- 5% Alarm Threshold) MAC Voltage:1.0V (+/- 5% Alarm Threshold) Temperature Monitor BOARD: 0~80°C MAC: 0~85°C PHY: 0~85°C Power Input Internal power supply Input: 100-240V AC Output: 450W PoE Power Budget 370W Reset button Support reset to default configuration Dimension 441(W) x 270(D) x 45(H) mm FAN Design 6300 Fanx2 (Smart Fan) Temperature Operating: -5~ 50? Storage : -40 ~ 70? Humidity Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing) Software Feature Status System Information     Logging Message     Port Statistics   Error Disabled Bandwidth Utilization   Link Aggregation   MAC Address Table 8K   Network IP Address Static / Dynamic   System Time SNTP / From Computer / Manual Time   Port Port Setting State / Speed / Duplex / Flow Control   Error Disabled Recovery Interval ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood Link Aggregation Group   Port Setting State / Speed / Flow Control LACP   EEE     Jumbo Frame 9K Byte   PoE Global Setting Schedule Status Priority Setting Power Limit Power Show VLAN VLAN Create VLAN VLAN Configuration Membership   Port Setting Voice VLAN Property Voice OUI Protocol VLAN Protocol Group Group Binding MAC VLAN MAC Group Group Binding Surveillance VLAN Property Surveillance OUI GVRP Property Membership Statistics MAC Address Table Dynamic Address Aging Time   Static Address Filtering Address     Spanning Tree Property State / Operation Mode / Path Cost / BPDU Handling Operation Mode : STP/RSTP/MSTP Port Setting     MST Instance MST Port Setting Statistics     Discovery LLDP Property Port Setting   MED Network Policy MED Port Setting Packet View   Local Information   Neighbor   Statistics   Multicast General Property Unknown Multicast Action / Multicast Forward Method Group Address Router Port Forward All Table Throttling Filtering Profile Filtering Binding IGMP Snooping Property State / Version / Report Suppression Querier   Statistics   MLD Snooping Property State / Version / Report Suppression Statistics MVR Property State / VLAN / Mode / Group Start / Group Count / Query Time Port Setting Group Address Security RADIUS TACACS+ AAA Method List Login Authentication Console / Telnet / SSH / HTTP / HTTPS Management Access Management VLAN   Management Service Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout Management ACL Management ACE Authentication Manager Property   Port Setting MAC-Based Local Account WEB-Based Local Account   Sessions   Port Security     Protected Port     Storm Control   State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown) DoS Property   Port Setting   Dynamic ARP Inspection Property   Statistics   DHCP Snooping Property   Statistics   Option82 Property   Option82 Circuit ID   IP Source Guard Port Setting   IMPV Binding   Save Database   ACL MAC ACL     MAC ACE     IPv4 ACL     IPv4 ACE     IPv6 ACL     IPv6 ACE       ACL Binding     QoS General Property CoS / DSCP / CoS-DSCP / IP Precedence Queue Scheduling Strict Priority / WRR CoS Mapping   DSCP Mapping   IP Precedence Mapping   Rate Limit Ingress / Egress Port   Egress Queue   Diagnostics Logging Property Console / RAM / Flash Remote Server   Mirroring     Ping     Traceroute     Copper Test     Fiber Module     UDLD Property Message Time Neighbor   Management User Account     Firmware Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Active Image Active Image / Backup Image Configuration Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Save Configuration Source File / Destination File, Restore Factory Default SNMP View   Group   Community   User   Engine ID   Trap Event Authentication Failure / Link UP_Down / Cold Start / Warm Start Notification   RMON Statistics     History     Event     Alarm     Marks Safety LVD EN62368-1:2014   EMC CE    EN55032: 2015+AC:2016          EN55035: 2017 class A FCC Part15, Subpart B: ANSI C

ALLNET Switch smart managed Layer2 28 Port • 24x 1 GbE • PoE Budget 400W • 4x SFP+ • 19" • Lüfterlos • ALL-SG8428v2FPM-10G Highlights: 24 port PoE Gigabit non-blocking switch architecture + 4 SFP+ Mini-GBIC slots = Total 28 ports PoE standard according to IEEE802.3af / at max. 30W per port Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (half/full) auto-detection Switch capacity up to 128Gbps 16K MAC address table 12K bytes jumbo frames 400W PoE budget Hardware monitor alarm FANLESS Secure the ALLNET Switch smart managed Layer2 28 Port – the powerhouse for your network! With 24 Gigabit Ethernet ports supporting PoE according to IEEE802.3af/at and providing a maximum power of 30W per port, you can reliably power your devices. Additionally, this switch boasts 4 SFP+ Mini-GBIC slots, increasing the total number of available ports to an impressive 28. This switch not only delivers power but also intelligent features. Thanks to the NWay protocol, it automatically detects the optimal speed (10/100/1000Mbps) and duplex mode (half/full) for your devices. The switch has a capacity of up to 128Gbps, and the 16K MAC address table ensures efficient data management. With a generous Jumbo Frames buffer of 12K bytes, you are ready for transferring large amounts of data. The integrated 400W PoE budget provides sufficient power to operate your PoE devices, all without fans, ensuring a quiet and disturbance-free environment. Expand your networking capabilities and rely on the quality of the ALLNET Switch smart managed Layer2 28 Port. Order the ALL-SG8428v2FPM-10G today and elevate your network's performance to the next level! Mechanical Drawings: Technical Details: Hardware-Specs: Items Specifications Model No. ALL-SG8428v2FPM-10G      Key Components RTL9301-CG+RTL8218Dx3 GD32E230G8U6TR + RTL8238Bx3 Flash IC: MXIC 32M Byte DDR: 2G bits I/O ports 24x GbE ports, RJ45 4 x 10G ports, SFP+ Reset Button: reset to default setting, re-start system Console port by RJ45 type PoE ports Port# 1~ 24 IEEE802.3at, IEEE802.3af LED Define PWR: Green LED Off: power off or fail On: power on SYS: Green LED Off: power off or fail On: system is ready Blinking: system booting up ALM: RED LED Off: Switch is normal condition On: Alarm for system failure because of overheat, wrong voltage. PoE Max: Green LED Off: No over PoE max power Alert On: Over PoE max power Alert 1-24 Port LED: Link/ACT: Off: port disconnected or link fail Green on: 1000Mbps connected Amber on: 10/100Mbps connected Blinking: sending or receiving data 25-28 port LED: SFP+: - Off: disconnected or fail - Blue: 10Gbps connected - Green: 1000Mbps connected - Blinking: data transmitting PoE: Green LED Off: PoE power output off Green on: PoE power output on HW feature IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3ae SFP+ IEEE802.3az EEE MAC address Table: 16K Packet buffer size: 12Mbit Jumbo Frame: 12K bytes 128Gbps switching capacity Forwarding rate: 95.2Mpps (64-byte package size) Data Transfer Rate Ethernet:10 Mbps (half duplex),20 Mbps (full duplex) Fast Ethernet:100 Mbps (half duplex),200 Mbps (full duplex) Giga Ethernet:2000 Mbps (full duplex) 10 Gigabit Ethernet:20 Gbps (full duplex) System Monitor HW Monitor IC: ADT7476 Voltage Monitor Input Voltage: 12V (+/-7% Alarm Threshold) I/O Voltage: 3.3V (+/- 5% Alarm Threshold) DDR Voltage: 1.5V (+/- 5% Alarm Threshold) PHY Voltage: 1.1V (+/- 5% Alarm Threshold) MAC Voltage:1.0V (+/- 5% Alarm Threshold) Temperature Monitor BOARD: 0~80°C MAC: 0~85°C PHY: 0~85°C Power Input Internal power supply Input: 90~264VAC/47~63Hz Output: 600W PoE Power Budget 400W Reset button Support reset to default configuration Dimension 441(W) x 270(D) x 44(H) mm FAN Design Fanless Temperature Operating: 0 ~ 40? Storage : -40 ~ 70? Humidity Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing) Software-Specs: Status System Information     Logging Message     Port Statistics   Error Disabled   Bandwidth Utilization   Link Aggregation   MAC Address Table 16K   Network IP Address Static / Dynamic   System Time SNTP / From Computer / Manual Time   Port Port Setting State / Speed / Duplex / Flow Control   Error Disabled Recovery Interval ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood Link Aggregation Group   Port Setting State / Speed / Flow Control LACP   EEE     Jumbo Frame 12K Byte   PoE Global Setting Schedule Status   Priority Setting     Power Limit     Power Show     VLAN VLAN Create VLAN VLAN Configuration Membership   Port Setting Voice VLAN Property   Voice OUI   Protocol VLAN Protocol Group   Group Binding   MAC VLAN MAC Group   Group Binding   Surveillance VLAN Property   Surveillance OUI   GVRP Property   Membership   Statistics   MAC Address Table Dynamic Address Aging Time   Static Address     Filtering Address     Spanning Tree Property State / Operation Mode / Path Cost / BPDU Handling Operation Mode : STP/RSTP/MSTP Port Setting     MST Instance     MST Port Setting     Statistics     Discovery LLDP Property Port Setting   MED Network Policy   MED Port Setting   Packet View   Local Information   Neighbor   Statistics   Multicast General Property Unknown Multicast Action / Multicast Forward Method Group Address Router Port Forward All Table   Throttling   Filtering Profile   Filtering Binding   IGMP Snooping Property State / Version / Report Suppression Querier   Statistics   MLD Snooping Property State / Version / Report Suppression Statistics   MVR Property State / VLAN / Mode / Group Start / Group Count / Query Time Port Setting   Group Address   Security RADIUS     TACACS+     AAA Method List   Login Authentication Console / Telnet / SSH / HTTP / HTTPS Management Access Management VLAN   Management Service Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout Management ACL   Management ACE   Authentication Manager Property   Port Setting   Sessions   Port Security     Protected Port     Storm Control   State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown) DoS Property   Port Setting   Dynamic ARP Inspection Property   Statistics   DHCP Snooping Property   Statistics   Option82 Property   Option82 Circuit ID   IP Source Guard Port Setting   IMPV Binding   Save Database   ACL MAC ACL     MAC ACE     IPv4 ACL     IPv4 ACE     IPv6 ACL     IPv6 ACE       ACL Binding     QoS General Property CoS / DSCP / CoS-DSCP / IP Precedence Queue Scheduling Strict Priority / WRR CoS Mapping   DSCP Mapping   IP Precedence Mapping   Rate Limit Ingress / Egress Port   Egress Queue   Diagnostics Logging Property Console / RAM / Flash Remote Server   Mirroring     Ping     Traceroute     Copper Test     Fiber Module     UDLD Property Message Time Neighbor   Management User Account     Firmware Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Active Image Active Image / Backup Image Configuration Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Save Configuration Source File / Destination File, Restore Factory Default SNMP View   Group   Community   User   Engine ID   Trap Event Authentication Failure / Link UP_Down / Cold Start / Warm Start Notification   RMON Statistics     History     Event     Alarm    

ALLNET Switch smart managed Layer2 54 Port • 48x 1 GbE • PoE Budget 800W • 48x PoE at • 6x SFP+ • 19" • ALL-SG8454PM-10G Highlights: 48 port Gigabit non-blocking switch architecture + 6 SFP+ Mini-GBIC slots = Total 52 ports Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (half/full) auto-detection Switch capacity up to 216Gbps 32K MAC address table 12K bytes jumbo frames 2x 480W power supply built in to provide max. 800W PoE power 4x smart fans installed Discover the ALLNET Smart Managed 48-Port Gigabit Switch - your ultimate solution for network performance enhancement and PoE provisioning! With the ALLNET ALL-SG8454PM-10G Switch, you'll reach new heights in network performance and management. This intelligent, managed Gigabit switch comes equipped with 48 ports for lightning-fast connections and features 6 SFP+ Mini-GBIC slots, providing you with a total of 52 versatile connectivity options. Unmatched Speed and Flexibility: Our switch architecture offers an impressive non-blocking Gigabit connection. With support for the NWay protocol, you can automatically detect speeds of 10/100/1000Mbps and the desired duplex mode (half or full duplex), allowing for effortless adaptation. Impressive Capacity and Management: This switch offers an astonishing capacity of up to 216Gbps, providing you with ample headroom for seamless data transfers and network activities. The integrated 32K MAC address table ensures your network runs smoothly, and support for 12K-byte jumbo frames further enhances efficiency. PoE Power and Cooling: Thanks to the 2 built-in 480W power supplies, you can deliver up to 800W of PoE power to effortlessly support your PoE-enabled devices. Additionally, the switch features 4 smart fans that ensure optimal cooling, keeping your network reliable even under heavy loads. The ALLNET ALL-SG8454PM-10G is the perfect choice to take your network to the next level. Maximum performance, intelligent management, and top-notch PoE provisioning make this switch the ideal selection for businesses valuing peak performance and flexibility. Invest in the future of your network with the ALLNET Smart Managed 48-Port Gigabit Switch - your gateway to modern network technology!  Mechanical Drawings: Technical Details: Hardware Specs: Items Specifications Model No. ALL-SG8454PM-10G Key Components RTL9311+RTL8218Dx6 GD32E230G8U6TR + RTL8238Bx6 Flash IC: MXIC 32M Byte DDR: 2G bits I/O ports 48x GbE ports, RJ45 6 x 10G ports, SFP+ Reset Button: reset to default setting, re-start system Console port by RJ45 type PoE ports Port# 1~ 48 IEEE802.3at, IEEE802.3af LED Define PWR: Green LED Off: power off or fail On: power on SYS: Green LED Off: power off or fail On: system is ready Blinking: system booting up Alert: Red LED Off: Switch is normal condition On: Alarm for system failure because of overheat, wrong voltage. PoE Max: Green LED Off: No over PoE max power Alert On: Over PoE max power Alert 1-48 Port LED: Link/ACT: Off: port disconnected or link fail Green on: 1000Mbps connected Amber on: 10/100Mbps connected Blinking: sending or receiving data 49-52 port LED: SFP+: - Off: disconnected or fail - Blue: 10Gbps connected - Green: 1000Mbps connected - Blinking: data transmitting PoE: Green LED Off: PoE power output off Green on: PoE power output on Slide Switch: Swap Port LED & PoE LED display HW feature IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3ae SFP+ IEEE802.3az EEE MAC address Table: 32K Packet buffer size: 16Mbit Jumbo Frame: 12K bytes 216Gbps switching capacity Forwarding rate: 129.3Mpps (64-byte package size) Data Transfer Rate Ethernet:10 Mbps (half duplex),20 Mbps (full duplex) Fast Ethernet:100 Mbps (half duplex),200 Mbps (full duplex) Giga Ethernet:2000 Mbps (full duplex) 10 Gigabit Ethernet:20 Gbps (full duplex) System Monitor HW Monitor IC: ADT7476 Voltage Monitor Input Voltage: 12V (+/-7% Alarm Threshold) I/O Voltage: 3.3V (+/- 5% Alarm Threshold) DDR Voltage: 1.5V (+/- 5% Alarm Threshold) PHY Voltage: 1.1V (+/- 5% Alarm Threshold) MAC Voltage:1.0V (+/- 5% Alarm Threshold) Temperature Monitor BOARD: 0~80°C MAC: 0~85°C PHY: 0~85°C Power Input Internal power supply Input: 90~264VAC/47~63Hz, Two AC connector Output: 480WX2 PoE Power Budget 800W PoE power pin-out Alternative A (Pin 1,2/3,6) PoE Output power capacity Maximum output :30W per each port Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discover the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority can be configured and default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable Reset button Support reset to default configuration Dimension 441(W) x 330(D) x 45(H) mm FAN Design Fan*4 (Smart Fan) Temperature Operating: 0 ~ 50? Storage : -40 ~ 70? Humidity Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing) Software Specs: Status System Information     Logging Message     Port Statistics   Error Disabled   Bandwidth Utilization   Link Aggregation   MAC Address Table 16K   Network IP Address Static / Dynamic   System Time SNTP / From Computer / Manual Time   Port Port Setting State / Speed / Duplex / Flow Control   Error Disabled Recovery Interval ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood Link Aggregation Group   Port Setting State / Speed / Flow Control LACP   EEE     Jumbo Frame 12K Byte   PoE Global Setting Schedule Status   Priority Setting     Power Limit     Power Show     VLAN VLAN Create VLAN VLAN Configuration Membership   Port Setting Voice VLAN Property   Voice OUI   Protocol VLAN Protocol Group   Group Binding   MAC VLAN MAC Group   Group Binding   Surveillance VLAN Property   Surveillance OUI   GVRP Property   Membership   Statistics   MAC Address Table Dynamic Address Aging Time   Static Address     Filtering Address     Spanning Tree Property State / Operation Mode / Path Cost / BPDU Handling Operation Mode : STP/RSTP/MSTP Port Setting     MST Instance     MST Port Setting     Statistics     Discovery LLDP Property Port Setting   MED Network Policy   MED Port Setting   Packet View   Local Information   Neighbor   Statistics   Multicast General Property Unknown Multicast Action / Multicast Forward Method Group Address Router Port Forward All Table   Throttling   Filtering Profile   Filtering Binding   IGMP Snooping Property State / Version / Report Suppression Querier   Statistics   MLD Snooping Property State / Version / Report Suppression Statistics   MVR Property State / VLAN / Mode / Group Start / Group Count / Query Time Port Setting   Group Address   Security RADIUS     TACACS+     AAA Method List   Login Authentication Console / Telnet / SSH / HTTP / HTTPS Management Access Management VLAN   Management Service Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout Management ACL   Management ACE   Authentication Manager Property   Port Setting   Sessions   Port Security     Protected Port     Storm Control   State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown) DoS Property   Port Setting   Dynamic ARP Inspection Property   Statistics   DHCP Snooping Property   Statistics   Option82 Property   Option82 Circuit ID   IP Source Guard Port Setting   IMPV Binding   Save Database   ACL MAC ACL     MAC ACE     IPv4 ACL     IPv4 ACE     IPv6 ACL     IPv6 ACE       ACL Binding     QoS General Property CoS / DSCP / CoS-DSCP / IP Precedence Queue Scheduling Strict Priority / WRR CoS Mapping   DSCP Mapping   IP Precedence Mapping   Rate Limit Ingress / Egress Port   Egress Queue   Diagnostics Logging Property Console / RAM / Flash Remote Server   Mirroring     Ping     Traceroute     Copper Test     Fiber Module     UDLD Property Message Time Neighbor   Management User Account     Firmware Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Active Image Active Image / Backup Image Configuration Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Save Configuration Source File / Destination File, Restore Factory Default SNMP View   Group   Community   User   Engine ID   Trap Event Authentication Failure / Link UP_Down / Cold Start / Warm Start Notification   RMON Statistics     History     Event     Alarm    

ALLNET switch smart managed Layer2 10 port • 8x 1 GbE • PoE budget 240 watts • 8x PoE at • 2x SFP • Fanless • 19" • ALL-SG8410PM" Highlight: 8 port Gigabit PoE switch Base-TX and 2x port SFP Compact design fits into 19" network cabinets. (Both brackets are included in the scope of delivery, optional wall mounting "screws and cables, on-site) Ports 1-2 PoE IEEE802.3bt up to max. 90W Ports 3-8 PoE according to IEEE802.3at up to max. 30W Support of L2 switching functions, including VLAN, trunk group, port mirroring, etc. Supports advanced management via WEB Supports PoE management, such as activate/deactivate PoE, PoE reboot, extend PoE mode. Supports permanent PoE, reboot software or software upgrade PoE non-stop 4KV &overvoltage protection, 6KV contact/8KV air protection Mounting: Wall or magnet mounting possible via threaded screws 240W PoE budget for maximum performance Present the ALLNET ALL-SG8410PM Lite Management PoE Switch – your gateway to efficient monitoring and SMB connectivity! Optimise your network infrastructure with the innovative ALL-SG8410PM, a versatile 8-port PoE switch tailored for smart surveillance and small to medium sized businesses. Designed to simplify operations, this switch offers a comprehensive range of features while eliminating unnecessary complexities. With 8 high-speed 10/100/1000Mbps RJ45 ports, including 2 ports with breakthrough BT 90W power and 6 ports with 30W PoE, the ALL-SG8410PM ensures seamless connectivity for your devices. Whether IP cameras, VoIP telephones or other network peripherals - this switch offers reliable power supply and data transmission. But that's not all– the ALL-SG8410PM stands out as one of the pioneering PoE web-managed switches on the market, offering unrivalled installation flexibility. With the ability to be mounted in 19" network cabinets and the clever provision for magnetic mounting using metric threaded screws, this switch opens up a world of possibilities. Say goodbye to limited mounting options – the ALL-SG8410PM offers you four versatile choices: 19"-rack mounting, integration into 10"-switch cabinets, magnetic mounting or wall mounting (screws and plugs to be provided by the customer). Whether you want to optimise space in a crowded server room or ensure seamless deployment in diverse environments, this switch adapts easily to your needs. Manage your network effortlessly via the intuitive web-based user interface, which offers advanced features such as flow control, VLAN configuration and more. With the ALL-SG8410PM, you have control over your network infrastructure like never before. Experience the future of networking with the ALLNET ALL-SG8410PM – Where innovation meets reliability and connectivity knows no bounds. Use cases with a special focus on the multi-mounting options and the various PoE outputs: IT resellers: Use the flexible mounting options of the ALL-SG8410PM to customise network solutions for different customer environments - whether in 10-inch cabinets, 19-inch racks, through magnetic mounting or wall mounting. Benefit from the different PoE outputs: The BT PoE outlets offer an impressive 90W of power for demanding devices such as PTZ cameras, while the AT PoE outlets manage with 30W of power for standard devices such as IP telephones. Lighting range: Magnetic mounting capability allows lighting professionals to easily mount the ALL-SG8410PM to metal structures, simplifying the installation of smart lighting systems in various environments. The powerful PoE BT outlets enable direct power supply to high-end, high-power lighting units, while the AT PoE outlets can be used for standard LED lights. Telecommunications area: Install the ALL-SG8410PM in different environments such as offices, server rooms or telecommunication facilities with different mounting options to optimise network performance . The combination of BT and AT PoE outputs enables flexible power supply for telecoms devices such as IP phones, wireless access points and more. Electrician: Use the ALL-SG8410PM's versatile mounting options to seamlessly integrate it into electrical cabinets or systems, regardless of the available placement option. The powerful BT PoE outputs support the power supply of demanding industrial devices such as pan and tilt surveillance cameras, while the AT outputs can be used for standard devices such as access control systems. Video surveillance area: Mount the ALL-SG8410PM flexibly in surveillance environments, whether in a 19-inch rack, on a wall or even on metallic surfaces using magnetic mounting to ensure optimal positioning of the PoE switches . The powerful BT PoE outputs provide sufficient power for high-resolution IP cameras with advanced functions such as PTZ control and night vision, while the AT outputs can be used for standard cameras. These usage scenarios illustrate the versatility of the ALL-SG8410PM, both in terms of its mounting options and its support for different PoE output types, making it an attractive proposition for a wide range of professionals in various industries. Technical details: Model ALL-SG8410PM Copper Ports 8-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Fibre ports 2x1G BASE-X SFP interfaces PoE ports 1~2 supports IEEE802.3bt PoE Ports with max. 90W 3~8 supports IEEE802.3af/at PoE Port with max. 30W Switch architecture Store-and-Forward Switch Fabric 20Gbps/non-blocking Throughput 14.88Mpps @64 bytes Address Table 2K entries Share Data Buffer 1.5 Mb Jumbo Frame 9600 bytes Flash memory 4M Flow control IEEE 802.3x pause frame for full-duplex, Back pressure for half-duplex Reset button >5 sec: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 2.5A (max.) Power consumption Max.240 watts/1122 BTU PoE standards IEEE 802.3af/at/bt Ports 1-2 supports IEEE802.3bt) LED indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, off- soft work abnormal 10/100/1000T RJ45 interfaces (port 1 to port 8): PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, LNK/ACT (Green) Fast Blink - port connected with data transmission; Slow blink-port connected without data transmission; Off- No port connection 10/100/1000T RJ45 interfaces (port 9 to port 10): Speed (Yellow) Solid on-10/100M; off-1000M LNK/ACT (Green) Fast Blink - port connected with data transmission; Slow blink-port connected without data transmission; Off- No port connection EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection:ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Dimension 319x208x44mm Weight 2.4 kg Working temperature -10°C to 45°C Storage Temperature   -20°C to 70°C MTBF   50,000hrs Package list   8-Port 10/100/1000BASE-T +2 Gigabit SFP ports, 1~8 RJ45 ports support PoE power supply function EU power cable Mounting Kits (19" / 10" Brackets with Screws + Magnets QIG Software functions System setting System information DHCP client enable/disable IP setting User account setting Port configuration Auto-negotiation flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor Traffic statistics Port isolation Loop prevention Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port Link aggregation Static link aggregation MAC Address March Search Static MAC address VLAN 4094 Active VLANs 802.1Q Tag VLAN Port VLAN Static VLAN PoE management Total PoE power budget control Per port PoE function enable/disable PoE reboot Extend PoE mode Maintenance Firmware upgrade via web Factory default Reset Save reboot

ALLNET Switch full managed Layer2+ 52 Port • 48x GbE • PoE Budget 850W • 48x PoE at • 4x SFP+ • 19" • JSON API • ALL-SG8652PMJ-10G-850W Highlights: 48 ports Gigabit Layer2+ switch architecture (ports 1~48).  4 ports SFP+ 10G slots for optional GBICSs compatible (ports 48~52)  Supports various PoE management functions, including PoE Shedule, PoE PD Alive, etc.  Supports SFP DDM & cable diagnostics  Supports G.8032 ERPS, self-detection time < 20 ms  Supports 1588 V2.0, transparent clock  Supports port aggregation  4KV &overvoltage protection, 6KV contact/8KV air ESD protection  Max. 850W PoE budget  19"-angle or wall/table mounting possible NEW: PoE & LAN JSON Java script notation API for ON/OFF üvia remote ALL-SG8652PMJ-10G-850W is a managed PoE+ switch equipped with 48x 10/100/1000BASE-T ports, 4x 1Gb SFP/10Gb SFP+ uplinks and 48x RJ45 ports supporting both IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30 W per port) to supply power to connected IP phones, wireless access points or other standard-compliant PoE and PoE+ end devices. 4x SFP+ uplink ports are available to support connections to aggregation or core switches at a higher level. Extensive PoE management function As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8652PMJ-10G-850W has the following specialised PoE management features: PoE PD alive check Timed rebooting of the power supply PoE schedule Monitoring of PoE utilisation Soft reboot PoE non-stop Prioritisation of the PoE port feed-in 10Gbps uplink capacity for high bandwidth applications 10G Ethernet is a major leap forward in the development of Ethernet. The 10G SFP+ slots support dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX, which means that the administrator can now flexibly select the appropriate SFP/SFP+ transceiver depending on the transmission distance or speed to efficiently expand the network. This is a cost-effective solution for SME networks to achieve the maximum performance of 10G networks. Solution for IPv6 networks With the IPv6/IPv4 dual stack and other management features, the ALL-SG8652PMJ-10G-850W is the best choice for IP CCTV, VoIP and wireless solution providers to develop IPv6 networks. At the same time, they help SMEs to migrate their network infrastructures to the IPv6 era without additional investment. Robust layer 2 functions The ALL-SG8652PMJ-10G-850W can be programmed for advanced switch management functions, such as port aggregation, Q-in-Q VLAN, Spanning Tree Protocol, QoS, bandwidth control, ERPS, IGMP/MLD snooping, etc. The ALL-SG8652PMJ-10G-850W enables the operation of a high-speed trunk that combines multiple ports. Powerful security features The ALL-SG8652PMJ-10G-850W provides a comprehensive access control list (ACL) to enforce security at the network edge. It can be used to restrict network access by denying packets based on source and destination IP addresses, TCP/UDP port numbers or defined typical network applications. The protection mechanism also includes 802.1x port-based and MAC-based user and device authentication. The private VLAN function can be used to prevent communication between edge ports in order to protect user privacy. Improved security and traffic control The ALL-SG8652PMJ-10G-850W supports DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to protect IP snooping from attacks and discard ARP packets with invalid MAC addresses. The network administrator can now set up highly secure company networks with significantly less time and effort than before. User-friendly, secure management For efficient management, the ALL-SG8652PMJ-10G-850W Managed Switch series is equipped with console, web and SNMP management interfaces. With the management interface, the ALL-SG8652PMJ-10G-850W provides a user-friendly, platform-independent management and configuration option. The ALL-SG8652PMJ-10G-850W supports SNMP and can be managed via any management software based on the standard SNMP v1 or v2 protocol. At the same time, the ALL-SG8652PMJ-10G-850W offers Cisco-like commands via Telnet or the console port, so the customer does not need to learn new commands for these switches. In addition, the ALL-SG8652PMJ-10G-850W provides secure remote management by supporting SSH, SSL and SNMP v3 connections, where packet contents can be encrypted at each session. Intelligent SFP DDM function The ALL-SG8652PMJ-10G-850W supports the SFP-DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage. PoE schedule function for energy saving To protect the environment, the ALL-SG8652PMJ-10G-850W Ethernet PoE switch can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The intelligent PoE switch ALL-SG8652PMJ-10G-850W allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8652PMJ-10G-850W supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.   1588 time protocol for industrial computer networks The ALL-SG8652PMJ-10G-850W is ideal for telecommunications and carrier Ethernet applications and supports MEF service provisioning and timing-over-packet solutions for IEEE 1588 and synchronous Ether  JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.   PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical data: Model ALL-SG8652PMJ-10G-850W Copper Ports 48-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Fibre ports 4x1G/10GBASE-X SFP interfaces, supports 1G/10Gbps dual mode PoE ports 1~48-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-Forward Switch Fabric 176 Gbps/non-blocking Throughput 130.94Mpps @64 bytes Address Table 32K entries Share Data Buffer 32Mb Jumbo Frame 9600 bytes SDRAM 2Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power consumption Max. 850 watts PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink-work normal, solid on- soft work abnormal, fast Blink - soft upgra de PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 48): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 1G/10G SFP Interfaces (Port 25 to Port 28): Blue Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation Flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 512ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 1024 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting(Ingress/Egress) Stri Priority Security features Port security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload Dual firmware LLDP Configuration Export/Import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Telnet Synchronisation, IEEE1588 Support IEEE1588v2 transparent clock Other features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Tracert/ tracert 6 Layer 3 functions Static routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 440x290x44.5 mm Weight 4.5 kg Working temperature -10 °C to 45 °C Storage Temperature -20 °C to 70 °C MTBF 50,000hrs

ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM Highlights: 16 port Gigabit Layer2+ fully managed switch architecture Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (half/full) auto-detection Supports back-pressure (half duplex), flow control (IEEE 802.3x and IEEE 802.3az Energy Efficient Ethernet VLAN 4K Static / Port-Based / Tagged Based / Protocol / Voice VLAN / 802.1ad Q-in-Q Link Aggregation static link / LACP / Algorithm MAC based or IP based IGMP Snooping 256 groups IGMP v1/v2/v3, Fast Leave QoS (QoS>QoS multi-label, queue config, QoS mapping) Stormcontrol Totally fanless, no more annoying noises...  max. 280W budget 19"inch bracket or wall/table mounting possible The new ALLNET ALL-SG8618PMJ switch provides an optimal basis for small and medium-sized workgroups with high network and data traffic and enables fast data transmission in the network. With a total of 16 backward-compatible Gigabit PoE ports, the connected PoE end devices are reliably and powerfully interconnected. The ALL-SG8618PMJ is also ideal for use in office environments thanks to its fanless design, as no disturbing noise is generated. The switch is Layer 2+ fully managed and therefore supports all necessary standards such as QoS, VLAN, Spanning Tree, IGMP Snooping and Link Layer Discovery Protocol. This ensures the highest level of performance and security in your network. The robust metal housing is suitable for mounting in a 19“ cabinet as well as for wall mounting. The ALL-SG8618PMJ also has 2x SFP miniGBIC slots to connect even remote server/uplink end devices via fibre optic cable. Extensive PoE management function As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8626PM has the following special PoE management functions:   PoE PD alive check Timed rebooting of the power supply PoE schedule Monitoring of PoE utilisation Soft reboot PoE non-stop Prioritisation of the PoE port feed-in Intelligent PD alive check for frozen PDs The ALL-SG8618PMJ industrial PoE switch with 24 ports can be configured to monitor the status of the connected PDs in real time. As soon as the PD stops working and responding, the ALL-SG8618PMJ restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is greatly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator. PoE schedule function for energy saving To protect the environment, the ALL-SG8618PMJ Switch Ethernet PoE can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The ALL-SG8618PMJ intelligent PoE switch allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The AALL-SG8618PMJ supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.   Strong layer 2 functions The ALL-SG8618PMJ Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SG8618PMJ enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SG8618PMJ is equipped with console, web and SNMP management interfaces. With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option. For text-based management, access is possible via Telnet and the console port. For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session. Intelligent PoE switch with SFP DDM function The ALL-SG8618PMJ supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage. JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important. PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical data: Model ALL-SG8618PMJ Copper Ports 16-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Fibre ports 2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode PoE ports 1~16-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-Forward Switch Fabric 36 Gbps/non-blocking Throughput 26.78 Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 bytes SDRAM 1Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power consumption Max. 280 watts/1122 BTU PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 interfaces (Port 1 to Port 16): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 17 to Port 18): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate limiting (Ingress/Egress) Stri Priority Security features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload  Dual firmware LLDP Configuration export/import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other Features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP option 67 DHCP option 82 NTP/SNTP client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 440x290x44.5mm Weight 4 kg Working Temperature -10°C to 45°C Storage Temperature -20°C to 70°C MTBF 50,000hrs

ALLNET Switch full managed Layer2+ 26 Port • 24x GbE • PoE Budget 370W • 22x PoE at • 2x Combo • 2x SFP • 19" • Fanless • JSON API • ALL-SG8626PMJ Cost-effective 24 port Smart Managed Gigabit Layer-2 switch +4x SFP MiniGbic slots without fan for desktop and 19" rack installation   Highlights: 24 port Gigabit Layer2+ switch architecture Port 23/24 combo ports for TP or SFP (1G) and port 25/26 SFP (1G) slots Supports various PoE management functions, including PoE shedule, PoE PD-Alive, etc. Supports SFP DDM & cable diagnostics Supports G.8032 ERPS, self-detection time < 20 ms Supports 1588 V2.0, transparent clock Supports port aggregation 4KV &overvoltage protection, 6KV contact/8KV air ESD protection Totally fanless, no more annoying noises...  max. 390W budget 19"inch bracket or wall/table mounting possible The new ALLNET ALL-SG8626PMJ switch provides an optimal basis for small and medium-sized workgroups with high network and data traffic and enables fast data transmission in the network. With a total of 22 backward-compatible Gigabit PoE ports, the connected PoE end devices are reliably and powerfully interconnected. The ALL-SG8626PMJ is also ideal for use in office environments thanks to its fanless design, as no disturbing noise is generated. The switch is Layer 2+ fully managed and therefore supports all necessary standards such as QoS, VLAN, Spanning Tree, IGMP Snooping and Link Layer Discovery Protocol. This ensures the highest level of performance and security in your network. The robust metal housing is suitable for mounting in a 19“ cabinet as well as for wall mounting. ALL-SG8626PMJ also has 2x SFP miniGBIC slots to connect even remote server/uplink end devices via fibre optic cable. ALL-SG8626PMJ is a Layer 2+ Full Managed Switch PoE, which provides 24*10/100/1000M RJ45 ports and 4*1G uplink SFP slot ports (2 shared combo), with 24 port PoE with IEEE802.3 af/at standards, single port POE power output up to 30W. Extensive PoE management function As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8626PMJ has the following special PoE management functions:   PoE PD alive check Timed rebooting of the power supply PoE schedule Monitoring of PoE utilisation Soft reboot PoE non-stop Prioritisation of the PoE port feed-in Intelligent PD alive check for frozen PDs The ALL-SG8626PMJ industrial PoE switch with 24 ports can be configured to monitor the status of the connected PDs in real time. As soon as the PD stops working and responding, the ALL-SG8626PMJ restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is significantly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator. PoE schedule function for energy saving To protect the environment, the ALL-SG8626PMJ Ethernet PoE switch can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The ALL-SG8626PMJ intelligent PoE switch allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8626PMJ supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.   1588 time protocol for industrial computer networks The ALL-SG8626PMJ is ideal for telecom and carrier Ethernet applications and supports MEF service provisioning and timing-over-packet solutions for IEEE 1588 and synchronous Ether   Strong layer 2 functions The ALL-SG8626PMJ Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SG8626PMJ enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SG8626PMJ is equipped with console, web and SNMP management interfaces. With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option. For text-based management, access is possible via Telnet and the console port. For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session. Intelligent PoE switch with SFP DDM function The ALL-SG8626PMJ supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.  JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important. PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical data: Model ALL-SG8626PMJ Copper Ports 22-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Combo interfaces 2x 100/1000BASE-X SFP interface shared with port-23 and port-24; Supports 100/1000Mbps dual mode and DDM Fibre ports 2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode PoE ports 1~24-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-Forward Switch Fabric 52 Gbps/non-blocking Throughput 38.69Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 bytes SDRAM 1Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power consumption Max. 400 watts/1122 BTU PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 interfaces (Port 1 to Port 24): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 22 to Port 24): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation Flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate limiting (Ingress/Egress) Stri Priority Security features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload  Dual firmware LLDP Configuration export/import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Synchronisation, IEEE1588 Support IEEE1588v2 transparent clock Other features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP option 67 DHCP option 82 NTP/SNTP client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 440x290x44.5 mm Weight 4.5 kg Working temperature -10 °C to 45 °C Storage Temperature -20 °C to 70 °C MTBF 50,000hrs

ALLNET Switch full managed Layer2+ 24 Port • 24x GbE • PoE Budget 370W • 24x PoE at • 4x SFP+ • 19" • JSON API • ALL-SG8628PMJ-10G Highlights: 24 port Gigabit Layer2+ switch architecture (ports 1~24) 4 ports SFP+ 10G slots for optional GBICSs compatible (ports 25~28) Supports various PoE management functions, including PoE shedule, PoE PD-Alive, etc. Supports SFP DDM & cable diagnostics Supports G.8032 ERPS, self-detection time < 20 ms Supports 1588 V2.0, transparent clock Supports port aggregation 4KV &overvoltage protection, 6KV contact/8KV air ESD protection max. 370W PoE budget 19"inch bracket or wall/table mounting possible ALL-SG8628PMJ-10G is an L2+ managed switch with 24 Gigabit Ethernet ports and 4 1G/10G dual speed SFP ports. The 24 Ethernet ports support IEEE802.3.af/at PoE output, can work with PoE PD devices such as IP cameras, wireless AP, doorbell, etc. With the advanced L2+ management function, it is easy to set up to meet the technical requirements of the project. It is an ideal solution for CCTV surveillance, wireless coverage and other SMB applications. Extensive PoE management function As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8628PMJ-10G has the following special PoE management functions:   PoE PD alive check Timed rebooting of the power supply PoE schedule Monitoring of PoE utilisation Soft reboot PoE non-stop Prioritisation of the PoE port feed-in 10Gbps uplink capacity for high bandwidth applications 10G Ethernet is a major leap forward in the development of Ethernet. The 10G SFP+ slots support dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX, which means that the administrator can now flexibly select the appropriate SFP/SFP+ transceiver depending on the transmission distance or speed to efficiently expand the network. This is a cost-effective solution for SME networks to achieve the maximum performance of 10G networks. Solution for IPv6 networks With the IPv6/IPv4 dual stack and other management features, the ALL-SG8628PMJ-10G is the best choice for IP CCTV, VoIP and wireless solution providers to develop IPv6 networks. At the same time, they help SMEs to migrate their network infrastructures to the IPv6 era without additional investment. Robust Layer 2 functions The ALL-SG8628PMJ-10G can be programmed for advanced switch management functions, such as port aggregation, Q-in-Q VLAN, Spanning Tree Protocol, QoS, bandwidth control, ERPS, IGMP/MLD snooping, etc. The ALL-SG8628PMJ-10G enables the operation of a high-speed trunk that combines multiple ports. Powerful security features The ALL-SG8628PMJ-10G provides a comprehensive access control list (ACL) to enforce security at the network edge. It can be used to restrict network access by denying packets based on source and destination IP addresses, TCP/UDP port numbers or defined typical network applications. The protection mechanism also includes 802.1x port-based and MAC-based user and device authentication. The private VLAN function can be used to prevent communication between edge ports in order to protect user privacy. Improved security and traffic control The ALL-SG8628PMJ-10G supports the DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to protect IP snooping from attacks and to discard ARP packets with invalid MAC addresses. The network administrator can now set up highly secure company networks with significantly less time and effort than before. User-friendly, secure management For efficient management, the ALL-SG8628PMJ-10G managed switch series is equipped with console, web and SNMP management interfaces. With the management interface, the ALL-SG8628PMJ-10G provides a user-friendly, platform-independent management and configuration option. The ALL-SG8628PMJ-10G supports SNMP and can be managed via any management software based on the standard SNMP v1 or v2 protocol. At the same time, the ALL-SG8628PMJ-10G offers Cisco-like commands via Telnet or the console port, so the customer does not have to learn new commands for these switches. In addition, the ALL-SG8628PMJ-10G provides secure remote management by supporting SSH, SSL and SNMP v3 connections, where packet contents can be encrypted at each session. Intelligent SFP DDM function The ALL-SG8628PMJ-10G supports the SFP-DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage. PoE schedule function for energy saving To protect the environment, the ALL-SG8628PMJ-10G Ethernet PoE switch can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals, and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The ALL-SG8628PMJ-10G intelligent PoE switch allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8628PMJ-10G supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.   1588 time protocol for industrial computer networks The ALL-SG8628PMJ-10G is ideal for telecommunications and carrier Ethernet applications and supports MEF service provisioning and timing-over-packet solutions for IEEE 1588 and synchronous Ether  JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.   PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical data: Model ALL-SG8628PMJ-10G Copper Ports 24-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Fibre ports 4-10G SFP interfaces PoE ports 1~24-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-Forward Switch Fabric 128Gbps/non-blocking Throughput 94.23Mpps @64 bytes Address Table 32K entries Share Data Buffer 32Mb Jumbo Frame 9600 bytes SDRAM 2Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power consumption Max. 370 watts PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink-work normal, solid on- soft work abnormal, fast Blink - soft upgra de PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 48): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 1G/10G SFP Interfaces (Port 25 to Port 28): Blue Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation Flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 512ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 1024 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting(Ingress/Egress) Stri Priority Security features Port security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload Dual firmware LLDP Configuration Export/Import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Telnet Synchronisation, IEEE1588 Support IEEE1588v2 transparent clock Other features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Tracert/ tracert 6 Layer 3 functions Static routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 440x290x44.5 mm Weight 4.5 kg Working temperature -10 °C to 45 °C Storage Temperature -20 °C to 70 °C MTBF 50,000hrs

ALLNET Switch full managed Layer2+ 16 Port • 12x GbE • PoE Budget 130W • 8x PoE at • 4x Giga LAN • 4x SFP+ • 19" • ALL-SG8616PMJ-10G Highlights: L2+ managed commercial PoE fibre switch is equipped with 12*10/100/1000Base-T RJ45 ports and 4*1/10G SFP+ fibre slot ports. Port 1-8 support IEEE 802.3af/at standard POE, single port POE power up to 30W. Port 9-12 can support 1GB Gigabit LAN Port 13-16 can support 1GB SFP slots or 10GB SFP+ slots Supports various PoE management functions, including PoE shedule, PoE PD-Alive, etc. Supports SFP DDM & cable diagnostics Supports G.8032 ERPS, self-detection time < 20 ms Supports 1588 V2.0, transparent clock Supports port aggregation 4KV &overvoltage protection, 6KV contact/8KV air ESD protection 19 inch bracket included in the scope of delivery The ALL-SG8616PMJ-10G is a Layer2+ 10G uplink managed PoE fibre optic switch. It has 12x10/100/1000Base-T RJ45 ports and 4x1/10G SFP+ fibre MiniGBIC slot ports. Port 1-8 supports PoE according to IEEE 802.3af/with standard PoE power supply. Single port PoE power supply reaches 30W, and the maximum PoE output power is 130W. The switch can supply power to POE terminal devices such as wireless AP, webcam, VoIP phones, intercom for visual access control in the building, etc. via a patch cable/network cable etc. The switch is suitable for hotels, campuses, parks, shopping centres, scenic spots, hospitals, factories, dormitories and small and medium-sized enterprises. The ALL-SG8616PMJ-10G has the full Layer2+ network management function, supports IPV4/IPV6 management, supports static forwarding of the full line rate of the route, supports full security protection mechanisms, full ACL/QoS policy and rich VLAN functions, and is easy to maintain and manage. functions and is easy to maintain and manage. The switch supports multiple network redundancy protocols STP/RSTP/MSTP and (ITU-T G.8032) ERPS(<50ms) to improve connection backup and network reliability. If the network fails, communication can be restored quickly. can be quickly restored to ensure critical uninterrupted communication for calls. According to the actual application requirements, you can provide/perform multiple application services such as PoE power management, port traffic control, VLAN division and SNMP via the web network management mode. 10Gbps uplink capacity for high bandwidth applications 10G Ethernet is a major leap forward in the development of Ethernet. The 10G SFP+ sockets support dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX, which means that the administrator can now flexibly select the appropriate SFP/SFP+ transceiver depending on the transmission distance or speed to efficiently expand the network. This is a cost-effective solution for SME networks to achieve the maximum performance of 10G networks. Solution for IPv6 networks With the IPv6/IPv4 dual stack and other management features, the ALL-SG8616PMJ-10G is the best choice for IP CCTV, VoIP and wireless solution providers to develop IPv6 networks. At the same time, they help SMEs to migrate their network infrastructures to the IPv6 era without additional investment. Robust Layer 2 functions The ALL-SG8616PMJ-10G can be programmed for advanced switch management functions, such as port aggregation, Q-in-Q VLAN, Spanning Tree Protocol, QoS, bandwidth control, ERPS, IGMP/MLD snooping, etc. The ALL-SG8616PMJ-10G enables the operation of a high-speed trunk that combines multiple ports. Powerful security features The ALL-SG8616PMJ-10G provides a comprehensive access control list (ACL) to enforce security at the network edge. It can be used to restrict network access by denying packets based on source and destination IP addresses, TCP/UDP port numbers or defined typical network applications. The protection mechanism also includes 802.1x port-based and MAC-based user and device authentication. The private VLAN function can be used to prevent communication between edge ports in order to protect user privacy. Improved security and traffic control The ALL-SG8616PMJ-10G supports the DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to protect IP snooping from attacks and to discard ARP packets with invalid MAC addresses. The network administrator can now set up highly secure company networks with significantly less time and effort than before. User-friendly, secure management For efficient management, the ALL-SG8616PMJ-10G managed switch series is equipped with console, web and SNMP management interfaces. With the management interface, the ALL-SG8616PMJ-10G provides a user-friendly, platform-independent management and configuration option. The ALL-SG8616PMJ-10G supports SNMP and can be managed via any management software based on the standard SNMP v1 or v2 protocol. At the same time, the ALL-SG8616PMJ-10G offers Cisco-like commands via Telnet or the console port, so the customer does not have to learn new commands for these switches. In addition, the ALL-SG8616PMJ-10G offers secure remote management by supporting SSH, SSL and SNMP v3 connections, where packet contents can be encrypted at each session. Intelligent SFP DDM function The ALL-SG8616PMJ-10G supports the SFP-DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage. PoE schedule function for energy saving To protect the environment, the ALL-SG8616PMJ-10G Ethernet PoE switch can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The ALL-SG8616PMJ-10G intelligent PoE switch allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8616PMJ-10G supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as low as 20 ms.   1588 time protocol for industrial computer networks The ALL-SG8616PMJ-10G is ideal for telecommunications and carrier Ethernet applications and supports MEF service provisioning and timing-over-packet solutions for IEEE 1588 and synchronous Ether  JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.   PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE)   Technical details: Model ALL-SG8616PMJ-10G Port 12x10/100/1000Base-T RJ45 ports+ 4x 10G SFP+ ports PoE port Port 1~8 support PoE (802.3af/at) Network Protocol IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-TIEEE802.3z 1000Base-X IEEE802.3ae 10GBase-SR/LRIEEE802.3x Ethernet port Feature 10/100/1000Base-T(X),Auto-sensing,Full/half duplex MDI/MDI-X self-adaption Fibre port Feature Gigabit SFP /10G SFP+ interface (Fibre module is not included, need to order separately, module options include single/multi mode, single/dual fibre, LC) Forwarding Mode Store and Forward (Full wire speed) Switching Capacity 64Gpps(Non-blocking) Forwarding Rate@64byte 31.6Mpps MAC 32K Buffer memory 32M Jumbo frames 9.6K Twisted PairTransmission 10BASE-T: Cat3,4,5 UTP(=100 metres) ; 100BASE-TX: Cat5 or later UTP(=100 metres) ; 1000BASE-X: Cat5e or later UTP(=100 metre) Optical Cable Multi Mode: 850nm 0-550M;Single Mode: 1310nm 0-40KM , 1550nm 0-120KM. Power Supply Pin Default: 1/2(+), 3/6(-); MAX / Average Power per port 30W/15.4W Total PWR / Input Voltage 130W (AC100-240V) Power Consumption Standby:<16W; Full Load:<120W LED Power indicator : PWR ( green); system indicator : SYS ( green) ; network indicator : Link (yellow); SFP fibre port :L/A (green); POE indicator : PoE (green) Power supply Built in power supply AC100~240V 50-60Hz 2.3A Operation TEMP / Humidity -10~+40°C; 5%~90% RH Non-condensing Storage TEMP / Humidity -20~+65°C; 5%~95% RH Non-condensing Port lightning protection Port lightning protection : 4KV 8/20us Managed feature PoE management Total power limit of PoE power supply PoE output power allocation per port, close /af/at PoE output priority configuration for each port PoE working state display per port Power delay start PoE work and time scheduling Layer 3 Function Support L2+ managed function, Support IPV4/IPV6 management Support layer3 soft routing (weak three tier) forwarding, Support different network segments, communication between different VLAN Support static routing / default routing 128, 1024 ARP software VLAN Support port based VLAN (4K), IEEE802.1q Support protocol based VLAN Support Access, Trunk, Hybrid three types of port configuration Support QinQ configuration Port aggregation Support LACP Support static polymerisation Support the largest 8 aggregation groups, each aggregation group supports 8 ports Spanning Tree STP (IEEE802.1d) RSTP (IEEE802.1w) MSTP (IEEE802.1s) Industrial Ring Network Protocol Support G.8032 (ERPS), support 255 loops at most, and supports 1024 devices per ring. The self healing time of the ring network is less than 20ms Multicast Support IGMP Snooping V1/V2 and support 1024 multicast groups at most. Support the user's quick departure mechanism Support MLD Snooping V1/V2 Support multicast VLAN Image Bi-directional traffic mirroring supporting the basic port QoS Diff-Serv QoS Each port supports 8 output queues Support 802.1p/DSCP priority mapping Support queue scheduling mechanism (SP, WRR, SP+WRR) priority tag Mark/Remark stream based packet filtering Support for stream based redirection Support flow based speed limit ACL Support L2 to L4 packet filtering function, can match the first 80 bytes of the message, provide based on the source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN and other definition ACL. Support ACL based on port and VLAN Safety Characteristics Support user grading management and password protection Support IEEE802.1X authentication / centralised MAC address authentication Support AAA&RADIUS authentication Support the number of MAC address learning restrictions Support MAC address black hole Support SSH 2 to provide secure passwords for user login . Support SSL to ensure data transmission security Support port isolation Support the speed limit function of ARP message Support IP source address protection Support ARP intrusion detection function Support against DoS attacks VLAN Support port based VLAN (4K), IEEE802.1q Support protocol based VLAN Support Access, Trunk, Hybrid three types of port configuration Support QinQ configuration Port aggregation Support LACP Support static polymerisation Support the largest 8 aggregation groups, each aggregation group supports 8 ports Spanning Tree STP (IEEE802.1d) RSTP (IEEE802.1w) MSTP (IEEE802.1s) Industrial Ring Network Protocol Support G.8032 (ERPS), support 255 loops at most, and supports 1024 devices per ring. The self healing time of the ring network is less than 20ms Multicast Support IGMP Snooping V1/V2 and support 1024 multicast groups at most. Support the user's quick departure mechanism Support MLD Snooping V1/V2 Support multicast VLAN Image Bi-directional traffic mirroring supporting the basic port QoS Diff-Serv QoS Each port supports 8 output queues Support 802.1p/DSCP priority mapping Support queue scheduling mechanism (SP, WRR, SP+WRR) priority tag Mark/Remark stream based packet filtering Support for stream based redirection Support flow based speed limit ACL Support L2 to L4 packet filtering function, can match the first 80 bytes of the message, provide based on the source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN and other definition ACL. Support ACL based on port and VLAN DHCP Support DHCP Client Support DHCP Snooping Suport DHCP Serve Suport DHCP Relay Management And Maintenance Support Console/AUX Modem/Telnet/SSH2.0 CLI command line configuration Support WEB network management (HTTPS) Support FTP, TFTP, Xmodem Support SNMP V1/V2C/V3 Support one bond reduction Support NTP clock Support system work log Support ping detection Support cable state detection Support CPU instant utilisation status view Support link layer discovery protocol LLDP System Requirements Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later; Cat5e or later Ethernet cable; TCP/ IP, network adapter and network operating system (Microsoft Windows, Linux or Mac OS X) installed on every computer in the network  

ALLNET Switch full managed Layer2+ 12 Port • 8x GbE • PoE Budget 300W • 8x PoE at • 4x SFP • 10" & 19" • Fanless • JSON API • ALL-SG8612PMJ   Highlights: 8-port 10/100/1000Mbit/s with full PoE support 2x SFP slots for optional MiniGBICS PoE power 4x a´ 30 watts (IEEE802.3at or 8x IEEE802.3af) FANLESS DESIGN with internal power supply Supports L2+ switching functions such as 802.1Q VLAN, mirroring, port isolation, IGMP snooping, DHCP snooping, LLDP, POE+ management, IP source guard, ARP inspection, ACLs etc. Support of Spanning Tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1s). Support of advanced management via WEB, CLI, TELNET, SSH, SNMP. Support for cable diagnostics and SFP DDM. Supports PoE management, such as PoE schedule, PoE PD Alive. Supports G.8032 quick ring protocol. Self-recovery time <20ms. Supports DDM, SFP digital diagnostics & monitoring Support of IPV4 and IPV6 functions for static routing Support of memory and CPU monitoring 4KV overvoltage protection, 6KV contact/8KV air protection PoE budget 300 W NEW: PoE & LAN JSON-Java-Script-Notation API for ON/OFF üvia remote NEW: Compact design that fits into both 10" and 19" network cabinets. (Both brackets are included in the scope of delivery, optional wall mounting "screws and cables, on-site) Product description: The ALL-SG8612PMJ is a fully managed Layer 2+ Gigabit PoE switch that features intelligent PoE functions to improve the availability of critical business applications. It offers IPv6/IPv4 management and an integrated L2+ Gigabit switching engine along with 8*10/100/1000BASE-T ports with 30 Watt 802.3at PoE+ and 2 Gigabit SFP slots. With a total power budget of up to 130 W for various types of PoE applications, it offers fast, secure and cost-effective Power over Ethernet network solutions for IP surveillance in small businesses and enterprises. The ALL-SG8612PMJ is programmed for advanced switch management functions such as 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping and MLD Snooping. In addition, the Link Layer Discovery Protocol (LLDP) is included as a layer 2 protocol to determine basic information about neighbouring devices in the local broadcast domain.   Extensive PoE management function As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8612PMJ has the following special PoE management functions: PoE PD alive check Timed rebooting of the power supply PoE schedule Monitoring of PoE utilisation Soft reboot PoE non-stop Prioritisation of the PoE port feed-in Intelligent PD alive check for frozen PDs The 12-port ALL-SG8612PMJ can be configured to monitor the status of connected PDs in real time. As soon as the PD stops working and responding, the ALL-SG8612PMJ restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is greatly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator. PoE schedule function for energy saving To protect the environment, the ALL-SG8612PMJ Switch Ethernet PoE can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The ALL-SG8612PMJ intelligent PoE switch allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8612PMJ supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as low as 20 ms.   Strong layer 2 functions The ALL-SG8612PMJ Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SG8612PMJ enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SG8612PMJ is equipped with console, web and SNMP management interfaces. With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option. For text-based management, access is possible via Telnet and the console port. For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session. Intelligent PoE switch with SFP DDM function The ALL-SG8612PMJ supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.  JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.   PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical data: Model ALL-SG8612PMJ Copper Ports 8-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Fibre ports 2x1G BASE-X SFP interfaces, supports 100M/1G Mbps dual mode PoE ports 1~8-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-Forward Switch Fabric 20 Gbps/non-blocking Throughput 14.88Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 bytes SDRAM 1Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power consumption Max. 300 watts/1122 BTU PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) PoE budget 300W LED Indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 interfaces (Port 1 to Port 8): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 9 to Port 10): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP(Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate limiting (Ingress/Egress) Stri Priority Security features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload  Dual firmware LLDP Configuration Export/Import                              CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 222x225x44.5mm Weight 2 kg Working Temperature -10°C to 45°C Storage Temperature -20°C to 70°C MTBF 50,000hrs