ALLNET Switch full managed Layer2+ 52 Port • 48x GbE • PoE Budget 850W • 48x PoE at • 4x SFP+ • 19" • JSON API • ALL-SG8652PMJ-10G-850W
MSRP: €999.00
Available, delivery time: 1-2 Tage
Product information "ALLNET Switch full managed Layer2+ 52 Port • 48x GbE • PoE Budget 850W • 48x PoE at • 4x SFP+ • 19" • JSON API • ALL-SG8652PMJ-10G-850W"
ALLNET Switch full managed Layer2+ 52 Port • 48x GbE • PoE Budget 850W • 48x PoE at • 4x SFP+ • 19" • JSON API • ALL-SG8652PMJ-10G-850W
Highlights:
- 48 ports Gigabit Layer2+ switch architecture (ports 1~48).
- 4 ports SFP+ 10G slots for optional GBICSs compatible (ports 48~52)
- Supports various PoE management functions, including PoE Shedule, PoE PD Alive, etc.
- Supports SFP DDM & cable diagnostics
- Supports G.8032 ERPS, self-detection time < 20 ms
- Supports 1588 V2.0, transparent clock
- Supports port aggregation
- 4KV &overvoltage protection, 6KV contact/8KV air ESD protection
- Max. 850W PoE budget
- 19"-angle or wall/table mounting possible
- NEW: PoE & LAN JSON Java script notation API for ON/OFF üvia remote
ALL-SG8652PMJ-10G-850W is a managed PoE+ switch equipped with 48x 10/100/1000BASE-T ports, 4x 1Gb SFP/10Gb SFP+ uplinks and 48x RJ45 ports supporting both IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30 W per port) to supply power to connected IP phones, wireless access points or other standard-compliant PoE and PoE+ end devices. 4x SFP+ uplink ports are available to support connections to aggregation or core switches at a higher level.
Extensive PoE management function
As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8652PMJ-10G-850W has the following specialised PoE management features:
- PoE PD alive check
- Timed rebooting of the power supply
- PoE schedule
- Monitoring of PoE utilisation
- Soft reboot PoE non-stop
- Prioritisation of the PoE port feed-in
10Gbps uplink capacity for high bandwidth applications
10G Ethernet is a major leap forward in the development of Ethernet. The 10G SFP+ slots support dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX, which means that the administrator can now flexibly select the appropriate SFP/SFP+ transceiver depending on the transmission distance or speed to efficiently expand the network. This is a cost-effective solution for SME networks to achieve the maximum performance of 10G networks.
Solution for IPv6 networks
With the IPv6/IPv4 dual stack and other management features, the ALL-SG8652PMJ-10G-850W is the best choice for IP CCTV, VoIP and wireless solution providers to develop IPv6 networks. At the same time, they help SMEs to migrate their network infrastructures to the IPv6 era without additional investment.

Robust layer 2 functions
The ALL-SG8652PMJ-10G-850W can be programmed for advanced switch management functions, such as port aggregation, Q-in-Q VLAN, Spanning Tree Protocol, QoS, bandwidth control, ERPS, IGMP/MLD snooping, etc. The ALL-SG8652PMJ-10G-850W enables the operation of a high-speed trunk that combines multiple ports.
Powerful security features
The ALL-SG8652PMJ-10G-850W provides a comprehensive access control list (ACL) to enforce security at the network edge. It can be used to restrict network access by denying packets based on source and destination IP addresses, TCP/UDP port numbers or defined typical network applications. The protection mechanism also includes 802.1x port-based and MAC-based user and device authentication. The private VLAN function can be used to prevent communication between edge ports in order to protect user privacy.
Improved security and traffic control
The ALL-SG8652PMJ-10G-850W supports DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to protect IP snooping from attacks and discard ARP packets with invalid MAC addresses. The network administrator can now set up highly secure company networks with significantly less time and effort than before.
User-friendly, secure management
For efficient management, the ALL-SG8652PMJ-10G-850W Managed Switch series is equipped with console, web and SNMP management interfaces. With the management interface, the ALL-SG8652PMJ-10G-850W provides a user-friendly, platform-independent management and configuration option. The ALL-SG8652PMJ-10G-850W supports SNMP and can be managed via any management software based on the standard SNMP v1 or v2 protocol. At the same time, the ALL-SG8652PMJ-10G-850W offers Cisco-like commands via Telnet or the console port, so the customer does not need to learn new commands for these switches. In addition, the ALL-SG8652PMJ-10G-850W provides secure remote management by supporting SSH, SSL and SNMP v3 connections, where packet contents can be encrypted at each session.
Intelligent SFP DDM function
The ALL-SG8652PMJ-10G-850W supports the SFP-DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.

PoE schedule function for energy saving
To protect the environment, the ALL-SG8652PMJ-10G-850W Ethernet PoE switch can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money.

Planned PD restart
The intelligent PoE switch ALL-SG8652PMJ-10G-850W allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow.

Redundant ring with fast recovery for critical network applications
The ALL-SG8652PMJ-10G-850W supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.

1588 time protocol for industrial computer networks
The ALL-SG8652PMJ-10G-850W is ideal for telecommunications and carrier Ethernet applications and supports MEF service provisioning and timing-over-packet solutions for IEEE 1588 and synchronous Ether

JSON-Java Script Object Notation API
With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.
- PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function)
- LAN Port Enabled/Disabled (for switches without PoE)
![]()

Technical data:
|
Model |
ALL-SG8652PMJ-10G-850W |
|
Copper Ports |
48-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|
Fibre ports |
4x1G/10GBASE-X SFP interfaces, supports 1G/10Gbps dual mode |
|
PoE ports |
1~48-802.3af/802.3at PoE Injector Ports |
|
Console ports |
1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) |
|
Switch architecture |
Store-and-Forward |
|
Switch Fabric |
176 Gbps/non-blocking |
|
Throughput |
130.94Mpps @64 bytes |
|
Address Table |
32K entries |
|
Share Data Buffer |
32Mb |
|
Jumbo Frame |
9600 bytes |
|
SDRAM |
2Gb |
|
Flash memory |
128Mb |
|
Flow control |
IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
|
Reset button |
>2 sec: Factory default and reset |
|
Power Supply |
100~240V AC, 50/60Hz, 4A (max.) |
|
Power consumption |
Max. 850 watts |
|
PoE standards |
IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
|
PoE power supply type |
Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) |
|
LED indicators |
Power: Green |
|
EMC |
Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 |
| Layer2 Functions | |
|
Port configuration |
Auto-negotiation Flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics |
|
Link aggregation |
Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP |
|
MAC Table |
Aging Time Static MAC address Dynamic MAC address management |
|
VLAN |
4094 Active VLANs |
|
ACL |
512ACLs |
|
Spanning tree |
802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter |
| Ring Protection |
<20ms G.8032 ERPS Ring Fast Ring |
| Multicast |
1024 groups |
|
QOS |
8 mapping IDs to 8 level priority queues |
|
Security features |
Port security |
|
Management |
SNMP v1/v2c/v3 with Full Private MIBs |
|
Synchronisation, IEEE1588 |
Support IEEE1588v2 transparent clock |
|
Other features |
DNS Client |
|
PoE management |
Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft reboot PoE non-stop |
|
Maintenance |
Cable Diagnostics |
| Layer 3 functions | |
|
Static routing |
IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) |
|
IPV6 |
IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 |
|
Dimension |
440x290x44.5 mm |
|
Weight |
4.5 kg |
|
Working temperature |
-10 °C to 45 °C |
|
Storage Temperature |
-20 °C to 70 °C |
|
MTBF |
50,000hrs |
Article properties
| Anzahl Ports PoE/LAN: | 48/0 |
|---|---|
| Belüftung Switch: | Mit Lüfter |
| Einsatzort Switch: | 19" |
| Extra Features: | JSON-PoE-API |
| LAN Geschwindigkeit: | 1Gbit/s |
| Management: | full managed |
| PoE Budget: | <1000 Watt |
| PoE Port Leistung: | 30W at |
| SFP Geschwindigkeit: | SFP 1GBit |
| SFP Port Anzahl: | 4 |
Cisco / ALLNET/ D-Link / Lancom, LC connector, For MultiMode 850nm
Available, delivery time: 1-2 Tage
LC connector, MultiMode 850nm, Industrial -40 -+85deg, Max. Cable lengths with 50/125µm MultiMode cable. OM2 80m, OM3 300m, OM4 500m for Allnet/AlliedTelesyn/Avago/Avaya/Cambium/D-link/Entersys/Mikrotik/Netgear/Lancom/QNAP/Planet/Ubiquiti/Zyxel/ZTE
Available, delivery time: 1-2 Tage
Universal miniGBIC LR module with LC connectorfor ALLNET/3Com/Cisco/D-Link, 10.3G 1310nm 3.3V Singlemode, SFP+ Range: 10km at 9/125 µm cable
Available, delivery time: 1-2 Tage
LC connector, 1310nm SingleMode, Industrial -40 -+85deg, Max. Range 10km with 9µm SingleMode cable. DDM support - SFF8472 monitoring level measurement for Allnet/AlliedTelesyn/Avago/Avaya/Cambium/D-link/Entersys/Mikrotik/Netgear/Lancom/QNAP/Planet/Ubiquiti/Zyxel/ZTE
Available, delivery time: 1-2 Tage
LC connector, wavelength 1310nm, for multimode cable up to 220m at OM1-4, Commercial 0-+70deg, for Allnet/AlliedTelesyn/Avago/Avaya/Cambium/D-link/Entersys/Mikrotik/Netgear/Lancom/QNAP/Planet/Ubiquiti/Zyxel/ZTE
Available, delivery time: 1-2 Tage
RJ45 connector, SFP+, 30m range, Commercial 0-+70deg, uncoded, for Allnet/AlliedTelesyn/Avago/Avaya/Cambium/D-link/Entersys/Mikrotik/Netgear/Lancom/QNAP/Planet/Ubiquiti/Zyxel/ZTE
Available, delivery time: 1-2 Tage
ALL4750, ALLNET/D-Link/ZyXEL/Enterasys/Lancom, LC-Connector 1.125G 850 nm Multimode, SFP, 550m range
Available, delivery time: 1-2 Tage
LC-connection 1.125G 850 nm multimode, SFP, 550m range, industrial -40 -+85degrees, for Allnet/D-link/Netgear/Allied/Lancom/Zyxel/Entersys/ZTE/Planet/Avago/ Microtics/Ubiquiti/Avaya
Available, delivery time: 1-2 Tage
Universal miniGBIC LX module with LC connector for ALLNET/3Com/Cisco/D-Link/ZyXEL/Enterasys/Lancom, 1.125G 1310nm Singlemode, SFP Range: 10 km at 9/125 µm cable
Available, delivery time: 1-2 Tage
LC-connection 1.125G 1310nm singlemode, SFP, 10km range, Industrial -40 -+85degrees, for Allnet/D-link/Netgear/Allied/Lancom/Zyxel/Entersys/ZTE/Planet/Avago/ Microtics/Ubiquiti/Avaya
Available, delivery time: 1-2 Tage
for ALLNET/D-Link/Lancom/Zyxel, LC connector 1.125G 1310nm 3.3V singlemode, SFP, 20KM range
Available, delivery time: 1-2 Tage
LC-Anschl 1.125G 1310nm 3,3V Singlemode, SFP, 20KM Reichweite, Industrial -40 -+85Grad, für Allnet/AlliedTelesyn/Avago/Avaya/Cambium/CommScope Ruckus/Cisco/D-link/Edgecore/Entersys/Mikrotik/Netgear/Lancom/Synology/TP-Link/QNAP/Planet/Ubiquiti/Watchguard/ZTE/Zyxel
Available, delivery time: 1-2 Tage
Universal miniGBIC LHX module with LC connectorfor ALLNET/3Com/Cisco/D-Link, 1.125G 1310nm 3.3V Singlemode, SFP Range: 40km at 9/125 µm cable
Available, delivery time: 1-2 Tage
Universal miniGBIC ZX module with LC connector for ALLNET/3Com/Cisco/D-Link, 1.125G 1550nm 3.3V Singlemode, SFP Range: 70-80 km at 9/125 µm cable
Available, delivery time: 1-2 Tage
LC connector, 1.25G, Singlemode, SFP, 20KM range, Commercial 0-+70deg, *** only for one fiber! 1xLC simplex up to 20Km***, Attention works only in combination with the Tx1490nm! for Allnet/AlliedTelesyn/Avago/Avaya/Cambium/D-link/Entersys/Mikrotik/Netgear/Lancom/QNAP/Planet/Ubiquiti/Zyxel/ZTE
Available, delivery time: 1-2 Tage
LC-Anschluss, 1.25G, Singlemode, SFP, 20KM Reichweite, Industrial -40 -+85Grad, *** nur für eine Faser! 1xLC simplex bis 20Km***, Achtung funktioniert nur in Verbindung mit dem Tx1490nm! für Allnet/AlliedTelesyn/Avago/Avaya/Cambium/CommScope Ruckus/Cisco/D-link/Edgecore/Entersys/Mikrotik/Netgear/Lancom/Synology/TP-Link/QNAP/Planet/Ubiquiti/Watchguard/ZTE/Zyxel
Available, delivery time: 1-2 Tage
LC connector, 1.25G, Singlemode, SFP, 20KM range, Commercial 0-+70deg, *** only for one fiber! 1xLC simplex up to 20Km***, Attention works only in combination with the Tx1310nm! for Allnet/AlliedTelesyn/Avago/Avaya/Cambium/D-link/Entersys/Mikrotik/Netgear/Lancom/QNAP/Planet/Ubiquiti/Zyxel/ZTE
Available, delivery time: 1-2 Tage
LC-Anschluss, 1.25G, Singlemode, SFP, 20KM Reichweite, Industrial -40 -+85Grad, *** nur für eine Faser! 1xLC simplex bis 20Km***, Achtung funktioniert nur in Verbindung mit dem Tx1310nm! für Allnet/AlliedTelesyn/Avago/Avaya/Cambium/CommScope Ruckus/Cisco/D-link/Edgecore/Entersys/Mikrotik/Netgear/Lancom/Synology/TP-Link/QNAP/Planet/Ubiquiti/Watchguard/ZTE/Zyxel
Available, delivery time: 1-2 Tage
RJ45 connector, SFP, 100m range, Commercial 0-+70deg, uncoded, for Allnet/AlliedTelesyn/Avago/Avaya/Cambium/D-link/Entersys/Mikrotik/Netgear/Lancom/QNAP/Planet/Ubiquiti/Zyxel/ZTE
Available, delivery time: 1-2 Tage
LC-connector 1.125G 1550nm 3,3V singlemode, SFP, 120KM range, Commercial 0-+70deg, for Allnet/AlliedTelesyn/Avago/Avaya/Cambium/D-link/Entersys/Mikrotik/Netgear/Lancom/QNAP/Planet/Ubiquiti/Zyxel/ZTE
Available, delivery time: 1-2 Tage
RJ45-Anschluss, SFP, 100m Reichweite, Industrial -40 -+85Grad, uncodiert, Realtek chipset: write SX optical module code für Allnet/AlliedTelesyn/Avago/Avaya/Cambium/CommScope Ruckus/Cisco/D-link/Edgecore/Entersys/Mikrotik/Netgear/Lancom/Synology/TP-Link/QNAP/Planet/Ubiquiti/Watchguard/ZTE/Zyxel
Available, delivery time: 1-2 Tage
Kabeltyp FTP (Folienschirm, PVC) Kategorie 5E Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 0.25 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp FTP (Folienschirm, PVC) Kategorie 5E Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 0.5 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp FTP (Folienschirm, PVC) Kategorie 5E Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 2 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp FTP (Folienschirm, PVC) Kategorie 5E Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 5 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp S-FTP (geflecht/Folien-schirm, PVC) Kategorie 5E Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 0,25 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp S-FTP (geflecht/Folien-schirm, PVC) Kategorie 5E Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 0,5 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp S-FTP (geflecht/Folien-schirm, PVC) Kategorie 5E Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 2 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp S-FTP (geflecht/Folien-schirm, PVC) Kategorie 5E Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 7,5 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 0,25 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 0,5 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 1,0 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 2 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 3 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 5 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B Stecker RJ45 mit Rasternasenschutz, Kabellänge 7,5 m Kabelfarbe grau Besonderheit Patchkabel in Synergy21 Blisterverpackung
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B
Available, delivery time: 1-2 Tage
Kabeltyp PIMF(S-STP), (geflecht/Adernpaarefolien-geschirmt,Halogenfrei) Kategorie 6 Anschluss Seite A Stecker RJ45 mit Rasternasenschutz, Anschluss Seite B
Available, delivery time: 1-2 Tage
.Quickly and Easily test PoE existence of Ethernet network, .Compliant with IEEE 802.3at/af PoE Standard; .RJ45 connector, simply plug in the cable; .Compact design specially tailored for system integrator and installers. 1. When the PoE Type A lighting, it means endspan (12/36) is providing power, and it?fs 802.3af standard, the output power is 15.4W (PD Max 12.95W) 2. When the PoE Type A & AT Type A are lighting, it means endspan (12/36) is providing power, and it?fs 802.3at standard, the output power is 30.0W (PD Max 25.50W) 3. When the PoE Type B lighting, it means midspan (45/78) is providing power, and it?fs 802.3af standard, the output power is 15.4W (PD Max 12.95W) 4. When the PoE Type B & AT Type B are lighting, it means midspan (45/78) is providing power, and it?fs 802.3at standard, the output power is 30.0W (PD Max 25.50W) 5. When the PoE Type A & PoE Type B are lighting, it means midspan & endspan (4 pairs) is providing power, and it?fs 802.3af standard, the output power is 30.0W 6. When the 4 Leds are lighting, it means midspan & endspan (4 pairs) is providing power, and it?fs 802.3at standard, the output power is 60.0W 7. When there?fs No Leds lighting, it means no PoE.
Available, delivery time: 1-2 Tage
EK600SW.1 1mtr., Schwarz 250V/10A, VDE-geprüft, 3x1,00mm², 90Grad-Netzstecker auf Kaltgerätebuchse Mit „IEC Lock" wird ein unbeabsichtigtes Abziehen vom gespeisten Gerät verhindert Nach dem Einstecken lässt sich die Kaltgerätebuchse nur durch Betätigung der Entriegelung wieder entfernen
Available, delivery time: 1-2 Tage
EK600SW.2 2mtr., Schwarz 250V/10A, VDE-geprüft, 3x1,00mm², 90Grad-Netzstecker auf Kaltgerätebuchse Mit „IEC Lock" wird ein unbeabsichtigtes Abziehen vom gespeisten Gerät verhindert Nach dem Einstecken lässt sich die Kaltgerätebuchse nur durch Betätigung der Entriegelung wieder entfernen
Available, delivery time: 1-2 Tage
EK600SW.3 3mtr., Schwarz 250V/10A, VDE-geprüft, 3x1,00mm², 90Grad-Netzstecker auf Kaltgerätebuchse Mit „IEC Lock" wird ein unbeabsichtigtes Abziehen vom gespeisten Gerät verhindert Nach dem Einstecken lässt sich die Kaltgerätebuchse nur durch Betätigung der Entriegelung wieder entfernen
Available, delivery time: 1-2 Tage
LC-Anschluss, 1310nm SingleMode, Commercial 0-+70Grad, Max. Reichweite 40km mit 9µm SingleMode Kabel. für Allnet/AlliedTelesyn/Avago/Avaya/Cambium/CommScope Ruckus/Cisco/D-link/Edgecore/Entersys/Mikrotik/Netgear/Lancom/Synology/TP-Link/QNAP/Planet/Ubiquiti/Watchguard/ZTE/Zyxel
Available, delivery time: 1-2 Tage
LC-Anschluss, 1310nm SingleMode, Commercial 0-+70Grad, Max. Reichweite 80km mit 9µm SingleMode Kabel. für Allnet/AlliedTelesyn/Avago/Avaya/Cambium/CommScope Ruckus/Cisco/D-link/Edgecore/Entersys/Mikrotik/Netgear/Lancom/Synology/TP-Link/QNAP/Planet/Ubiquiti/Watchguard/ZTE/Zyxel
Available, delivery time: 1-2 Tage
Abmasse: H44xB433xT235mm, Laufzeit: 13/4min(halb/voll-Last) (1) USB, (1) seriell, (1) Remote Control Port, (6) IEC C13 Kaltgeräte Dose Line-interactive USV Topologie Energiesparende Technologie Simulierter Sinuswellen-Ausgang Automatische Spannungsregulierung (AVR) Überlastschutz Hot-Swap-fähige Batterien Überspannungs- und Blitzschutz EMI und RFI Filter Telefon / Fax / Modem / DSL / Netzwerkschutz LCD-Statusanzeige USB-Kommunikationsanschluss PowerPanel® Verwaltungssoftware SNMP / HTTP-Fernverwaltungsfähigkeit (optional) Rackmount 19 Zoll Format https://www.cyberpower.com/de/de/product/sku/OR600ERM1U#runtime_chart
Available, delivery time: 1-2 Tage
Abmasse: H44xB433xT235mm, Laufzeit: 13/4min(halb/voll-Last) (1) USB, (1) seriell, (1) Remote Control Port, (4) CEE7-Schutzkontakt Dose Line-interactive USV Topologie Energiesparende Technologie Simulierter Sinuswellen-Ausgang Automatische Spannungsregulierung (AVR) Überlastschutz Hot-Swap-fähige Batterien Überspannungs- und Blitzschutz EMI und RFI Filter Telefon / Fax / Modem / DSL / Netzwerkschutz LCD-Statusanzeige USB-Kommunikationsanschluss PowerPanel® Verwaltungssoftware SNMP / HTTP-Fernverwaltungsfähigkeit (optional) Rackmount 19 Zoll Format https://www.cyberpower.com/de/de/product/sku/OR650ERM1UGR#runtime_chart
Available, delivery time: 1-2 Tage
* Garantieabwicklung über Allnet *, für alle Intel-Switche und Netzwerkkarten, *Auftragsbezogen, nicht Stornierbar*, 10GB RJ45 bis zu 30m, Commercial 0-+70Grad, Eingang: SFP+ 10GB Ausgang: RJ45 10Gbase-T/5Gbase-T/2.5Gbase-T/1000base-T on line port
Available, delivery time: 1-2 Tage
Your smart entry into building automation – ALLNET ALL3500v2 With the ALLNET ALL3500v2 building automation centre, you get a cost-effective and versatile platform that is optimally tailored to semi-professional requirements. Thanks to state-of-the-art technology, high connectivity and a wide range of applications, the ALL3500v2 is the perfect partner for your automation projects. Highlights at a glance: Cost-efficient platform: Maximum functionality with minimum space and cost requirements. Intuitive operation: Can be conveniently controlled via web interface (HTTP/HTTPS) or smartphone. Flexible data connection: Integration via JSON, MQTT or SNMP possible. Versatile sensor technology: Comprehensive monitoring of temperature, humidity, air pressure and more. Future-proof: Expandable with i2C sensor ports and compatible with a wide range of ALLNET sensors and actuators. Features that impress The ALL3500v2 is based on a stable embedded Linux platform (MIPS or ARM architecture), which enables seamless integration into existing systems. With four RJ45 ports for sensor modules, you can realise a wide range of control and monitoring tasks. Whether local control or cloud-based applications - the ALL3500v2 offers you all the tools you need to organise your building automation efficiently and securely. Versatile application options: HACCP temperature monitoring: Precise detection and control in critical environments. Room climate control: Monitoring of temperature and humidity for demand-based control of heaters or humidifiers. Security management: Detection of gas odour, smoke or water ingress and triggering of alarms. Automated garden irrigation: Time and humidity-controlled for maximum efficiency. Energy consumption optimisation: Control based on consumption data from external sensors (e.g. ALL4590/4490 power meter). Compact, powerful, versatile The ALL3500v2 combines a variety of functions in a compact design that has been specially developed for space-saving installations. With four relays, sensor ports and contact interfaces, it can be used flexibly and provides the basis for sophisticated automation solutions - ideal for private and commercial applications. Why ALLNET ALL3500v2? With the ALL3500v2 you get a reliable and economical solution for building automation. From monitoring and control to integration into complex installations, this central unit offers everything you need for smart, efficient and future-proof automation. Start your building automation now with the ALLNET ALL3500v2! Versatile sensors, actuators and switching options for your automation The ALLNET ALL3500v2 impresses with its flexibility and functionality: With four ports for external sensors and actuators, four relay outputs for controlling loads and four contact inputs for buttons or switches, it provides an ideal basis for complex automation applications. Sensing and control – Precise and versatile With the ALL3500v2, you can measure and analyse a variety of environmental parameters such as temperature, humidity or air pressure and execute automatic switching operations based on them. Control is either manual, time-controlled or dynamic, based on the measured values. Connectivity that inspires The ALL3500v2 is equipped with Ethernet and built-in WLAN, which enables easy integration into existing networks. Using an IP address in the TCP/IP network, you can: Retrieve and edit measurement data directly in the web browser. Receive automated notifications and reports by email. Request and control data via JSON or XML interfaces. Optional MQTT support enables the transmission of data to the cloud and integration into IoT environments. With its powerful connectivity and flexible control options, the ALL3500v2 is the perfect choice for efficient and future-proof building automation. I²C-Bus – Intelligent use of existing cable networks The ALLNET ALL3500v2 enables an uncomplicated connection of measurement and control modules via a standard network cable (RJ45, Cat. 5). This allows you to continue using existing cable infrastructures such as network or telephone cabling and saves costs and effort during installation. Advantages of the I²C bus system: Simple cabling: A standard network cable is sufficient to connect sensors and modules. Long range: Up to 100 metres of cable between the central unit and module. Integrated power supply: The modules are supplied with power directly from the central unit – no separate power source required. USB port – external memory connection The USB port on the ALLNET ALL3500v2 allows you to integrate external storage media easily and flexibly. This allows data to be saved and processed directly on connected USB devices. This enables extended data logging and analysis. Maximum number of sensors per ALL3500v2: Technical data: Element Specification Interfaces: 4x RJ45 for sensor modules Network connection: 1x RJ45 10/100Mbps Switching relay: 4x potential-free Contact input: 4x for push-buttons, switches, etc. Wireless LAN: Mediatek MTK7688 SOC chipset 2.4 GHz Wireless N Security: WEP 64/128bit, WPA, WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Other interfaces: 1x USB 2.0 1x console Power supply: 100~240 VAC, 50/60 Hz, external power supply Power consumption: <5 watts maximum How to use: Metal walkway Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Labelling: CE, RoHS Dimensions: 220.4 x 80 x 30 mm (length x width x height) Weight: 400 grams (device incl. WLAN antenna and ALL3006 sensor) Packaging contents: -ALLNET ALL3500v2 -ALLNET ALL3008 temperature sensor -WLAN antenna -External power supply -Operating instructions
Available, delivery time: 1-2 Tage
Temperature measurement via network easy made Highlights: detection of Temperature / Humidity / Gas / Smoke / Movement etc. via network Robust metal housing Brackets for attachment to wall Suitable for all operating systems 1x ALL3006 Temp-Sensor including Flexible/Multiple Installation of different ALLNET Bulding-Automation Units can be controlled in one Web-GUI with JSON API Optional Free-Software Modules like SNMP / FTP Upload / POST_GET / Upload into PoE Clock/Counter / EnOcean / The ALLNET ALL3419 IP Thermometer/Automation-Building-Main-Unit is a flexible and economical solution for temperature measurement over a network. The very compact design makes it suitable for use in confined spaces. The rugged metal housing has tabs for mounting on walls and ceilings and protects against mechanical damage. The ALL3419 IP Thermometer/Automation-Building-Main-Unit is connected to a computer network via cable or WLAN and is accessible by an IP address. The measured values ??can be accessed via web browser on the device itself. No additional software is required for operation. Thus the ALL3419 is appropriate for all operating systems. The temperature is measured by the included I2C RJ45 temperature sensor ALL3006. Another internal onboard sensor shows the internal system temperature. With the optional ALL3018 temperature & humidity sensor can detect also humidity. The measurement intervals can be set second by second. The last 512 values can be shown directly as a graphical trend. Additional Sensors and Actors can be also measure Gas / Movement etc. see http://www.allnet.de/en/allnet-brand/produkte/home-automation/home-automation-sensoren/ Intelligent features and programming by switching matrix Depending on measured values certain actions can be programmed over the software based switching matrix. For example, if temperature is above or below defined limits, the readings can be sent by email. This may once, several times, and/or in certain time intervals, so long as the matrix condition exists. Another possibility is switching of external IP switching devices, such as network-sockets series ALL307x or network-relay ALL4075/4175 as well as directly connected actuators, for example the relay module ALL4427/3527. Alternativly can be switches also over the JSON Protocol. Flexible installation options The external sensors can be plugged directly on ALL3419 or can be connected remotely via a control line. For remote connection a simple network cable (RJ45 connector, Cat. 5) is suitable to connect the sensors with the CPU. This way of connection is used in all ALLNET Home Automation products. For this purpose, an existing cable network such as already installed network or telephone lines can be used. The maximum cable length between CPU and sensor module can be up to 100 meters. The power supply of the sensor modules is already done via the main unit. A separate power source for each sensor module is not necessary. Borderless Cross-site temperature measurement Several ALL3419 can operate in conjunction with the bigger control and measurement computers ALLNET ALL3500/3505/4500 or ALL5000, to show a lot of geographically distributed values in a centralized way. Each individual ALL3419 is queried over an individual IP address and centrally stored and displayed in all the other Main-Units like ALL3418v2/3419/3500/3505/4500/5000 etc. Maximum number of sensors per ALL3419: Element Specification Sensor interface: 3x RJ45 for sensor/actor modules 1x USB 2.0 for additional Wireless Dongles like "EnOcean or Plugwise" 1x RJ45 Console Port for Serial-Connection Ethernet: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN 2,4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power source: 100~240 VAC, 50/60 Hz Power Consumption: <3 watt in operation Housing: metal housing Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 70 °C Storage humidity: 5% ~ 90% (non-condensing) Regulatory: CE, RoHS Dimensions: 92 x 85 x 24 mm (L x W x H) Weight: 134 g (ALL3419 with ALL3006 sensor) Package content: -ALLNET ALL3419 -ALLNET ALL3006 temperature sensor -WLAN antenna -External power supply -Quick installation guide
Available, delivery time: 1-2 Tage
The new central unit for your building control system Highlights: 16x I2C sensor ports for maximum expansion. max. 128x possible sensors via ALL4404 multiplexing hub. Linux based opensource operating system 1x USB front port for optional USB dongles Two-line LCD display for status and IP address indication Redundant 12VDC input with "Widget" display in Webgui The ALLNET ALL5000v2 IP Facility Control Server is the new flagship of the ALLNET home automation series. It offers all the features of the other MSR control centers, which is the consistent further development of the popular ALLNET MSR Ethernet sensor meter. During the development of the control server, the wishes of existing MSR users were taken into account and a large number of new features and interfaces were added without sacrificing the familiar functions. Also new is the expandability of the devices. The ALLNET ALL5000v2 IP Facility Control Server automates all tasks in building control, such as detection and signaling of environmental conditions such as temperature, humidity, pressure and much more, as well as triggering switching operations via contacts, relays and the like. This can be done manually, time-controlled or depending on recorded values. A wide variety of scenarios such as lighting, blinds, ventilation and household appliances can be controlled with the ALLNET ALL5000v2 IP Facility Control Server. From temperature detection and demand-based heating of individual rooms, control of garden irrigation, alarming in case of gas smell and water intrusion to automatic opening and closing of blinds depending on daylight and much more, there are no limits to your ideas. Accessible everywhere via network, internet and smartphone You control everything from a PC, notebook or other mobile device, such as smartphone or webpad. No matter if the devices you want to control, measure, regulate are located in the same building or on another continent. The ALLNET ALL5000v2 is accessible via an IP address. Your existing computer network and the Internet serve as the medium. The determined values can be retrieved directly from the device via the web browser or sent periodically via email or when a value exceeds or falls below certain preset limits. An integrated JSON interface is used to retrieve data externally via the Internet. Individually adapted to every need The ALLNET ALL5000v2 IP Facility Control Server has a Linux-based opensource operating system. Thus it offers enough freedom for own developments and adaptations of the software directly to the intended use of the user. Would you like a little more? The new interface diversity The ALLNET ALL5000v2 IP Facility Control Server leaves nothing to be desired and even tops the ALLNET ALL3505 Sensoric Appliance. There are 16 sensor ports (RJ45) for the connection of sensors, actuators, relays, etc. available. TThere is 1x USB port available, which can be used for example for USB memory sticks or EnOcean USB dongle for the use of EnOcean wireless switches. The two-line LCD display integrated into the housing shows you the status and the IP address. Technical Details: Element Specification Product: ALLNET ALL5000v2 IP Facility Control Server Module ports for measuring and switching modules: 16x RJ45 I2C-Sensor Ports for additional Sensors/Actors. Interfaces: 1x USB 2.0 extern 1x USB 2.0 intern 1x Temperatursensor onboard Network connection: 1x RJ45 10/100Mbps Power Supply: 100~240 VAC, 50/60 Hz, internal power supply unit optional redundant 12VDC power input Power consumption: <3 Watt (without additional modules) Housing: 19" metal housing (1U) Environment: Temperature operation: 5 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Marks: CE, RoHS Dimensions: 440 x 230 x 44 mm (width x depth x height) Package contents: 1 piece ALLNET ALL5000v2 1 piece ALLNET ALL3008 temperature sensor 1 manual Power cable
Available, delivery time: 1-2 Tage
Intelligent TCP/IP RGBW signalling lamp with buzzer & I2C sensor connection – Smart control & Versatile signalling Take your signalling to the next level with the TCP/IP network RGBW signal lamp with integrated buzzer & I2C sensor connection! Whether on the wall or ceiling – this innovative LED lamp offers maximum flexibility, simple control and seamless integration into your systems. Network capable & web control Thanks to the integrated web interface, the signalling lamp can be easily operated via browser – without any additional software! Flexible colour selection & traffic light function Use the predefined red, yellow and green colours as a classic traffic light display or mix individual colours thanks to RGBW technology. Dimmable brightness (0-100%) Adjust the light intensity flexibly – from soft lighting to maximum luminosity. Integrated buzzer for acoustic signals In addition to visual signalling, the lamp has an integrated buzzer, which can also be controlled via the web interface or API - ideal for additional acoustic warnings or alarms. External control via API &p>The optional SNMP or JSON API can be used to control the lamp externally and integrate it into applications. Perfect for automation & Industry 4.0 applications. .I2C port for additional sensors The signal lamp has an external I2C port, which enables a direct connection to ALLNET MSR sensors (measurement, control and regulation). More than 30 different sensors are available, including: ? Temperature & humidity sensors ? Wind speed & wind direction ? CO2 & air quality sensors ? Brightness & motion sensors ? And many more! ?? Perfect for: ?? Industry & production ?? IT & Server room monitoring ?? Smart Home & building automation ?? Office and conference rooms ?? Environmental & weather stations Rely on modern, networked signalling – with the TCP/IP RGBW signal lamp with buzzer & I2C sensor connection! Technical data: Element Specification Interfaces: 1x 5.5mm/2.1A power supply connection (48V power supply included) 1x I2C sensor port for optional ALLNET sensors or actuators 1x 100Mbit RJ45 LAN with integrated PoE IEEE802.3af 1x 3.5mm jack socket for console (programmer/interface) Network connection: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN chipset 2.4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power supply: 100~240 VAC, 50/60 Hz, 48V / 0.5A external power supply LED brightness: White: 14x12lm = 168lm Red: 14x10lm = 140lm Greün: 14x20lm =280lm Blue: 14x6lm = 84lm Buzzer volume: min. 85dB Power consumption: approx. 3.6W with LED Grün approx. 2W with LED OFF How to use: Form-fitting plastic housing (optional metal anti-theft protection possible) Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Labelling: CE, RoHS, RED Maße: 145 x 145x 15 mm (length x width x height) Ø145mm diameter Weight: 249 grams Packaging contents: - ALLNET ALL-PoE-RGBW-Lamp - External power supply unit "48V 0.5A" - Patch cable - Operating instructions
Available, delivery time: 1-2 Tage
2x replacement brackets with screws = bracket set
Available, delivery time: 1-2 Tage