Fanvil i53W, 7" Touch Screen SIP Indoor Station / SIP / POE

Straight DC plug on the connection cable. Zm suitable for connection to many 12V devices that require up to 2A current. Standard plug 5.5mm / 2.1mm hollow plug. Input 100V-240V 50-60Hz 0,8A MAX Output 12V/2A

The ALL0489v4 2.5GBASE-T PoE+ Injector provides up to 30 watts of power and a 2.5 Gigabit data connection anywhere in the network infrastructure. This device feeds DC power over a CAT5e UTP cable, increasing flexibility in positioning a PoE-enabled device when a nearby power source is lacking. It supports PoE+ standard (802.3af 15.4W & 802.3 at 30W) and up to 30W power for connected PD devices. It can easily connect to powerful devices such as VoIP phones, APs and IP cameras. The device is plug-and-play without software configuration. It supports 0?~45? Operating temperature and metal housing design, which is more suitable for various environmental applications. Provides a PoE LED status signal, which gives an easily detectable PoE connection status. Over-current and short-circuit protection are also supported to ensure safety. KEY FEATURES 10/100/1000/2500 Base-T (Data) for connection to Ethernet switch 10/100/1000/2500 Base-T PoE (Power/Data) for connection to the PoE device (PD) Auto-Negotiation Automatically detects if the connected device is PoE capable to avoid sending power to a non-PoE device. Complies with IEEE802.3, 802.3u, 802.3ab, 802.3bz, 802.3af, 802.3at standards. 802.3af (15.4W) and 802.3at (30W) PoE power output. one PoE Link LED one GND screw full range (100~240VAC) internal power supply No fan, passive cooling, small size, silent design MTBF: over 50,000 hours@45? ESD IEC61000-4-2 contact +/-4KV, air +/-8KV EFT IEC61000-4-4 power 2KV, LAN 1KV Overload protection IEC61000 4-5 cable to cable & cable to GND Level3 2KV PRODUCT SPECIFICATIONS Standard IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3bz, IEEE802.3af, IEEE802.3at Standards Interface: 1 * PoE+ 10/100/1000/2500Mbps RJ-45 port, 1 * 10/100/1000/2500Mbps RJ-45 port LED indicators: power supply (green), PoE link (green) Emission: FCC, CE, VCCI Class B Safety: CE LVD Operating temperature & humidity: 00- 450C; 10%~90% RH. Storage temperature & humidity: 20°- 70°C; 5%~90% RH. Dimension: 130 x 62 x 36 mm Switching power supply: +54V/40W, 100~240VAC input, 47~63Hz. Overload protection  

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC