MiBoxer BDSHHL LED Treppen Controller Adapter für LED DW Strips

Miboxer Treppen Controller. Für Lauflicht bei Treppen. 24V bis zu 480W (20A) gesamt bis zu 64 Stufen single color oder dual color strip bis zu 1024 Pixel 2 Wire PLC Stair Light Master(BLE+2.4G) • Bluetooth control • Two-wire control • Supports up to 64 stairs • Support SPI strip parameter setting, color calibration, point setting, color and brightness setting • Support short circuit protection, anti-reverse polarity protection Features Bluetooth control Two-wire control Supports up to 64 stairs Support step time setting Support delay lights-off time setting Support night light brightness setting Support 0-24 hours working time setting, prevent false triggering 4 light sensing modes Support SPI strip parameter setting, color calibration, point setting, color and brightness setting Support setting the CCT and brightness of staircase lights Support short circuit protection, anti-reverse polarity protection Parameters Product Name: Stair Light Model No.: BS64 Input Voltage: DC24V Power: 480W 20A Communication Protocol: Bluetooth / 2.4GHz RF Control distance: Bluetooth: 30m  2.4G: 30m Pixels: 1024 PIR sensing distance: 3m Steps: 2-64 working temperature: -10~40°C Certification: CE, EMC, RED

Kabel für Treppenkontroller T-Anschlußkabel Wählen sie die Länge/Abzweigungen für die Anzahl der Treppen die sie benötigen.

Lichtleiste für Treppenkontroller 20 Stück pro Verpackungseinheit Stair Light Sub-device(Dual White LED Light) ·BS-L2 Must be used with "2 wire PLC stair light master” Products Name Stair Light Sub-device(Dual White LED Light) Model No. BS-L2 Input Voltage DC24V Power 7W Luminous Flux 350LM Color Temperature 2700K~6500K CRI >80 Board Material Copper Thickness 2.5 oz (Front 1 oz, Back 1.5 oz) LED Strip Width 8mm IP Rate IP20 Tailor Length / (kürzbar) Min 25mm Beam Angle 120° Product Size 10x10x1000mm Sie können die Lichtleiste alle 25mm kürzen. Mit dem Zubehör 235894 können die Abschnitte weiterverwendet werden. Einfach anlöten und sie können den Rest der Leiste weiterbetreiben.

Synergy 21 LED Flex Strip Series COB high power A copper strip is embedded on the reverse side to improve stability and heat dissipation. Voltage: 24V,  Wattage: 10W/m, 50W total Light colour: CCT 2700–6500K, CRI>90  Luminous efficacy: 93 lm/W or 930 lm/m, total: 4650 lm Beam angle: 120° Protection class: IP20 Number of LEDs: 512 LEDs/m, total: 2560 LEDs LED type: COB Cut-to-size: 62.5 mm LED strip dimensions: 5000 × 8 × 2.5 mm Operating temperature: -25°C to +40°C Adhesive tape: yes, 3M on the reverse side Please ensure that the LED strip does not exceed the operating temperature of 40°C, as otherwise its service life cannot be guaranteed. No warranty can be provided for overheated LED strips.

Synergy 21 LED Flex Strip Series COB high power A copper strip is embedded on the reverse side to improve stability and heat dissipation. Voltage: 24V,  Wattage: 10W/m, 50W total Light colour: CCT 2700–6500K, CRI > 90 Luminous efficacy: 93 lm/W or 930 lm/m, total: 4650 lm Beam angle: 120° Protection class: IP67 Number of LEDs: 512 LEDs/m, total: 2560 LEDs LED type: COB Cutting length: 62.5 mm LED strip dimensions: 5000 × 10 × 7 mm Width/height of connector: 12.5 × 9 mm Operating temperature: -25°C to +40°C Adhesive tape: yes, 3M on the reverse side Please ensure that the LED strip does not exceed an operating temperature of 40°C, as otherwise its service life cannot be guaranteed. No warranty can be provided for overheated LED strips.

Löt shrink connector – Waterproof IP67 Löt heat shrink connector – Waterproof IP67 Waterproof solder sleeves (Solder Sleeves) for fast, secure and tight cable connections. Integrated tin ring for the electrical connection, outer heat-shrinkable sleeve with hot-melt adhesive seal for reliable sealing (IP67). Advantages Soldering, shrinking and sealing in a single work step Weather, vibration and corrosion resistance (IP67) No crimping pliers required ; hot air is sufficient Ideal for cars, motorbikes, boats, outdoor electrics and electronics Technical details   Colour Conductor cross-section (mm²) AWG Length (mm) Typical application White 0,25–0,34 26–24 26 Dünne signal lines Red 0.5–1.0 22–18 40 Electronics/automotive cables Blue 1.5–2.5 16–14 40 Standard power cable Yellow 4.0–6.0 12–10 40 Stronger supply lines Key points Soldering, shrinking & sealing in one step Waterproof (IP67) and corrosion-resistant Integrated tin ring for secure electrical connection Heat-shrinkable outer jacket with hot-melt adhesive seal No crimping tool required – only hot air or lighter Ideal for automotive, boat, motorbike, electronics & outdoor wiring Note on the application Stripping the conductor, twisting it and pushing it into the connector (overlap the wires in the tin ring). Heat with hot air from the centre (tin ring) towards the ends until tin flows and adhesive emerges. Let cool, carry out a tensile test. Only for copper conductors.

Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS

Hosing: PA66 O-ring: silicone Conductor material: cooper Cable range: 13.5mm~17mm Cable size: 4mm2 Temperature: 85°C Voltage: 250V Ingress protection: IP68 Fire classification: 94V0

Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS Dimension: W=6,5cm, L=10cm

IP68 cable connector with 2 compartment terminal Voltage: 450V Current: 32A  IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm

IP68 cable connector with 3 compartment terminal Voltage: 450V Current: 32A  IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm

250V/450V PTI250, T85 IP68 at 5 bar, 24A Contains an internal screw connector insert for up to 5 cables, which can be which can be connected at both ends. Rubber inserts for different cable diameters for sealing are included in the included in the scope of delivery. Min. Ø5mm to max. Ø14mm cable diameter

Waterproof junction boxes with terminal blocks, cable to cable 250V/450V PTI 250, T50 IP68 16A Min. Ø5mm, Max. Ø14mm