NB-IoT Sensoren

Ersatzbatterie für DRAGINO Lora und NB-IoT Sensoren. Kapazität 8500 mAh. HINWEIS: Aufgrund von Ausfuhrrichtlinien wird die Batterie in einem Sensorgehäuse mit einer PCB geliefert und muss aus diesem ausgebaut werden.

PT100 sensor Installation: insert Measuring range: -40 ~ 260 °C Dimension: f4 * 150mm Cable length 2 metres with M12 plug Food safety NOTE: only one probe included!

PT100 probe Installation: insert Measuring range: -196 ~ 150 °C Dimension: f5 * 30mm Cable length 2 metres with M12 plug Low temperature NOTE: only one probe included!

      DRAGINO NDDS20   Overview The Dragino NDDS20 is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution. It uses non contact method to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server. NDDS20 sensor is installed directly below the container to detect the height of the liquid level. User doesn’t need to open a hole on the container to be tested. The non contact measurement makes the measurement safety, easier and possible for some strict situation. NDDS20 uses ultrasonic sensing technology for distance measurement. NDDS20 is of high accuracy to measure various liquid such as: toxic substances, strong acids, strong alkalis and various pure liquids in high-temperature and high-pressure airtight containers. NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency,especially in deep coverage. NDDS20 supports different uplink methods include TCP, MQTT, UDP and CoAP for different application requirement. NDDS20 is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method) To use NDDS20, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS20 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS20 to get NB-IoT network connection. Features NB-IoT None Contact Liquid Level Measure Valid level range :20mm - 2000mm Liquid Level Measure by Ultrasonic technology Ultro low power consumption NB Bands: B1/B3/B8/B5/B20/B28 Uplink via MQTT,TCP,CoAP or UDP AT Commands to change parameters IP66 Waterproof Enclosure Uplink on periodically High capacity 8500 mAh Li-SOCI2 battery Usecases Smart liquid control solution Package contents 1 x NDDS20 LoRaWAN Liquid Level Sensor NOTE: Ultrasonic coupling paste and Eproxy AB glue are subjected in most shipping way. So the default package doesn’t include it and user needs to purchase locally.  

PT100 probe Installation: insert Measuring range: -70 ~ 450 °C Dimension: f4.5 * 30mm                                               Cable length 2 metres with M12 plug                                                                    High temperature     NOTE: only one probe included.

Standard PT100 sensor Installation: insert Measuring range: -60 ~ 200 °C Dimension: f5 * 30mm                                               Cable length 2 metres with M12 plug        NOTE: only one probe included.

        DRAGINO  NDS03A · Door-/Window Sensor   Overview The Dragino NDS03A is an Open/Close NB-IoT Door Sensor. It detects door open/close status and uplinks to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server. The NDS03A will send periodically data every 4 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically. NDS03A has a Datalog feature, it will record the open/close event and the user can retrieve the history from NB-IoT. NDS03A has the open alarm feature, user can set this feature so the device will send an alarm if the door has been open for a certain time. NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures. NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage. NDS03A supports different uplink methods including TCP, MQTT, UDP, and CoAP for different application requirements. NDS03A is powered by 8500mAh Li-SOCI2 battery, It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method) To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a NB-IoT SIM card from the operator and install into NDS03A to get NB-IoT network connection.  Features NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD Open/Close detect Open/Close statistics Monitor Battery Level connect two door sensors Datalog feature Uplink periodically Downlink to change configure Wall Mountable Outdoor Use Ultra-Low Power consumption AT Commands to change parameters Micro SIM card slot for NB-IoT SIM 8500mAh Battery for long-term use Usecases Wireless Alarm and Security Systems Home and Building Automation Industrial Monitoring and Control  Package contents 1 x DRAGINO NDS03A Türkontaktsensor    

          Weather Station Monitoring Temperature, Humidity, Wind Speed Sensor Description With Sensor Hub weather station, you can monitor outdoor environmental parameters. It is suitable for Smart Cities, Smart Farms, Smart Agricultural, environmental monitoring, and other use cases. The weather station is equipped with high-precision sensors that measure wind speed and direction, atmospheric pressure, humidity, and temperature. The Sensor Hub weather station guarantees long-term metrological monitoring with its robust design. The Splitter cable can connect several Sensor Probes and Probe IOs to a single Sensor Hub port. The distance between the Sensor Hub and Sensor Probe/Probe IO can be extended via the Extension cable. Note: Sensor Hub with Sensor Probe IO and connected sensor cannot be powered on batteries. You need to use the included power supply only.  The Sensor Hub has two variants based on the communication type - LoRaWAN only and LoRaWAN+NB IoT. SensorHub's NB-IoT module supports two types of LTE (Long-Term Evolution) categories, namely CAT M1 and CAT NB2. CAT M1 offers higher data rates and lower latency, while CAT NB2 provides ultra-low power consumption and greater coverage, making it an ideal choice for devices that operate on batteries and require long-term connectivity. Features LoRaWAN/NB-IoT communication Precise measurement of the parameters IP65 protection External DC power supply (optional) Solar panel power source (optional) Measure item Principle Range Resolution Accuracy Wind speed Ultrasonic 0-40m/s 0.01m/s ±0.5+2%FS Wind direction Ultrasonic 0-359º 1° ±3° Atmospheric temperature MEMS -40-+100? 0.1? ±0.5? Atmospheric humidity MEMS 0-100%RH 0.1%RH ±3% Atmospheric pressure MEMS 10-1100hPa 0.1hpa ±1.5hPa   Package contents 1 x Sensor Hub 1 x Sensor Probe IO 1 x Micro Weather sensor 1 x Power supply for the Sensor Hub 1 x Mounting kit for the Micro Weather sensor  

PT100 probe Installation: Insertion Measuring range: -60 ~ 200 °C Dimensions: 3.6 * 7.5 * 20mm Cable length 2 metres with M12 connector Flat type NOTE: only one probe included!