Rock Pi 4 zbh. RTC Battery 3.0V / CR2032 CMOS battery CR2032 with plug, backup lithium battery, plug approx. 3.2x4mm" CR2032 with plug approx. 3.2x4mm Battery CR2032 complete with lugs, plug approx. 3.2x4mm Model CR2032 System Manganese dioxide–Li/Organic Electrolyte Nominal Voltage (V) 3 Nominal Capacity (mAh)* 220 Nominal Discharge Current (mA) 0.2 Operating Temperature Range (deg. C)** –20 to +85 Weight (g)*** 3.0 Dimensions (mm)*** Diameter 20.0 Height 3.2 UL Recognition MH12568 CMOS battery CR2032 with plug, backup lithium battery, plug approx. 3.2x4mm suitable for Battery AHL03003095, AHL03002111, CR2032-2E31R, CR2032-TPX battery Compaq Presario V6000, Presario V6100, Presario V6400 HP G6000, G6030, G6031, G6032, G7000 HP Pavilion dv6000, Pavilion dv6100, Pavilion dv6101, Pavilion dv6102, Pavilion dv6103, Pavilion dv6104, Pavilion dv6105, Pavilion dv6106, Pavilion dv6107, Pavilion dv6108, Pavilion dv6109, Pavilion dv6110, Pavilion dv6111, Pavilion dv6112, Pavilion dv6113, Pavilion dv6114, Pavilion dv6115, Pavilion dv6116, Pavilion dv6117, Pavilion dv6118, Pavilion dv6119, Pavilion dv6120, Pavilion dv6121, Pavilion dv6122, Pavilion dv6123, Pavilion dv6124, Pavilion dv6125, Pavilion dv6126, Pavilion dv6127, Pavilion dv6128, Pavilion dv6129, Pavilion dv6130, Pavilion dv6131, Pavilion dv6132, Pavilion dv6133, Pavilion dv6134, Pavilion dv6135, Pavilion dv6136, Pavilion dv6137, Pavilion dv6138, Pavilion dv6139, Pavilion dv6140, Pavilion dv6141, Pavilion dv6142, Pavilion dv6143, Pavilion dv6144, Pavilion dv6145, Pavilion dv6146, Pavilion dv6147, Pavilion dv6148, Pavilion dv6149, Pavilion dv6150, Pavilion dv6151, Pavilion dv6152, Pavilion dv6153, Pavilion dv6154, Pavilion dv6155, Pavilion dv6156, Pavilion dv6157, Pavilion dv6158, Pavilion dv6159, Pavilion dv6160, Pavilion dv6161, Pavilion dv6162, Pavilion dv6163, Pavilion dv6164, Pavilion dv6165, Pavilion dv6166, Pavilion dv6167, Pavilion dv6168, Pavilion dv6169, Pavilion dv6170, Pavilion dv6171, Pavilion dv6172, Pavilion dv6174, Pavilion dv6175, Pavilion dv6180, Pavilion dv6181, Pavilion dv6182, Pavilion dv6183, Pavilion dv6184, Pavilion dv6185, Pavilion dv6186, Pavilion dv6187, Pavilion dv6188, Pavilion dv6189, Pavilion dv6190, Pavilion dv6191, Pavilion dv6195, Pavilion dv6196, Pavilion dv6197, Pavilion dv6198, Pavilion dv6199, Pavilion dv6200, Pavilion dv6203, Pavilion dv6215, Pavilion dv6216, Pavilion dv6300, Pavilion dv6500, Pavilion dv6700 HP Pavilion dv9000, Pavilion dv9001, Pavilion dv9002, Pavilion dv9003, Pavilion dv9004, Pavilion dv9005, Pavilion dv9006, Pavilion dv9007, Pavilion dv9008, Pavilion dv9009, Pavilion dv9010, Pavilion dv9011, Pavilion dv9012, Pavilion dv9013, Pavilion dv9014, Pavilion dv9015, Pavilion dv9016, Pavilion dv9017, Pavilion dv9018, Pavilion dv9019, Pavilion dv9020, Pavilion dv9021, Pavilion dv9022, Pavilion dv9024, Pavilion dv9030, Pavilion dv9033, Pavilion dv9035, Pavilion dv9036, Pavilion dv9037, Pavilion dv9038, Pavilion dv9039, Pavilion dv9040, Pavilion dv9041, Pavilion dv9042, Pavilion dv9043, Pavilion dv9044, Pavilion dv9045, Pavilion dv9046, Pavilion dv9047, Pavilion dv9048, Pavilion dv9049, Pavilion dv9050, Pavilion dv9051, Pavilion dv9052, Pavilion dv9053, Pavilion dv9054, Pavilion dv9055, Pavilion dv9056, Pavilion dv9057, Pavilion dv9058, Pavilion dv9059, Pavilion dv9060, Pavilion dv9061, Pavilion dv9064, Pavilion dv9065, Pavilion dv9066, Pavilion dv9067, Pavilion dv9068, Pavilion dv9072, Pavilion dv9073, Pavilion dv9074, Pavilion dv9075, Pavilion dv9076, Pavilion dv9077, Pavilion dv9078, Pavilion dv9079, Pavilion dv9080, Pavilion dv9081, Pavilion dv9082, Pavilion dv9083, Pavilion dv9084, Pavilion dv9085, Pavilion dv9086, Pavilion dv9087, Pavilion dv9088, Pavilion dv9089, Pavilion dv9090, Pavilion dv9091, Pavilion dv9092, Pavilion dv9093, Pavilion dv9094, Pavilion dv9095, Pavilion dv9096, Pavilion dv9097, Pavilion dv9098, Pavilion dv9099 Medion MD41300, MD41500, MD41567 Attention: Note polarity +/-, whether the same as the original connector of the battery, connector approx. 3.2x4mm! Battery CR2032 complete with lugs, shrink tubing, cable and plug. CMOS lithium battery IEC CR2032 lithium button cell with cable and plug, e.g. suitable for the HP Pavilion DV6000, Pavilion DV6100, Pavilion DV6200, Pavilion DV6300, Pavilion DV6500, Pavilion DV9000, Presario V6000, Presario V6100, Presario V6400 backup battery. Supplied as a battery with plug and shrink sleeve. Technical data: System: Lithium battery (non-rechargeable), voltage: 3.0 volts, capacity: 200mAh up to 220mAh, dimensions: approx. 20.2 x 3.5mm (can also be larger due to the shrink sleeve), weight: 12 grams, connector approx. 3.2x4mm

ROCK PI 4 Accessory Power Supply Adapter QC 3.0 Input: AC110-240V 50/60Hz 0.3A Output: DC5V=2.6A / 9V=1.7A / 12V=1.3A  

Rock Pi 4 zbh. Heatsink cooler not suitable for Rock Pi 4C Dimensions 85x55x15 incl. spacer

Rock Pi 4 zbh. EMMC 5.0 16GB also fits for ODroid

Rock Pi 4 zbh. EMMC 5.0 32GB also fits for ODroid

Extend the signal strength and spacing of your Rock Pi boards. Works with Rock Pi 4B v1.4 and Rock Pi S 2.4 and 5.8 GHz frequency Amplification ~5dB 50 Ohm easy to install Scope of delivery: Pigtail with 90° SMA connector 8.6 cm adjustable/rotatable antenna

Rock Pi 4 zbh. eMMC to Micro-SD fits for all devices that have a Micro-USB port i.e. you can equip your Raspberry PI/BananaPI/Lemaker/Friendly Elec/Khadas etc. all devices that have a Micro-USB port with a fast EMMC memory module/Flash.

Für banana pi, Lemaker Guitar, Lemaker HiKey. Passend für CPU und Speicher. Abmessungen: 15mm x 15mm x 10mm und 13,15mm x 13mm x 11mm Alu Kühlrippen zur besseren Wärmeableitung Verpackung mit zwei Kühlkörpern und Termalklebepads.

Rock Pi 4 zbh. USB 2.0 Male Type A to C 3A 1,5m

An extremely "rocking" mini computer for your projects! Rockchip RK3308 Quad A35 64bit processor with integrated VAD Modern Type-C connection 512MB RAM version USB 2.0 OTG (type C) + USB 2.0 HOST (type A) RJ45 100MB Ethernet 26-pin GPIO connector strip 26-pin voice/audio connector strip with I2S, PCM, TDM, PDM, SPDIF and HDMI ARC Size 1.5x1.5 inch (~38.1x38.1mm) Debian and Buildroot successfully tested ROCK Pi S on-board memory version with 8GBit or 1Gbyte NAND Flash 8 different types available - please note the variants and the corresponding prices

Das Synergy21 USB-C Kabel ist ein aktives Kabel, welches einen Chip besitzt. Dies ist ein Sicherheits- u. Leistungsmerkmal um die höchstmögliche Leistung zur Verfügung zu stellen, welche für dieses Kabel erlaubt ist (max 5A) Möchte ein Gerät mehr Leistung beziehen, geht das über dieses Kabel nicht, Kabelbrände und Überhitzung sind so nicht mehr möglich. ... der E-Marker ist ein Chip, der die Verbindung zwischen den angeschlossenen Geräten steuert. Er fragt ab, welche Datentransferrate und welche Stromstärke der Host und das Gerät jeweils unterstützen, und passt den Durchsatz entsprechend an. Bei USB 3.1 Gen 2 Kabeln und bei Kabeln, die mehr als 3A unterstützen muss ein E-Marker verbaut sein. Bei USB 2.0 Kabeln mit 3A Unterstützung ist er optional. Grundsätzlich wird er nur bei USB Type-C zu Type-C bzw. bei Thunderbolt 3 Kabeln benötigt. Kabeltyp USB 3.1 (geschirmt, Gewebe) Kategorie 10G/5A Coax Struktur Anschluss Seite A Typ C(Stecker) Anschluss Seite B Typ C(Stecker) Kabellänge 1,5 m Kabelfarbe Silber-Grau Besonderheit Kabel in Synergy21 Blisterverpackung  

Luxury version for the dedicated ROCK PI 4 fan!     integrated radiator     very easy access to the board    Remove only 4 screws to gain full access to your ROCK PI 4 .     attractive, sleek design     improved heat management (30% more cooling capacity)     convenient access to SD card slot and M.2 slot (without opening the case)     develop open, run closed....     has enough height to integrate the ROCK PI PoE HAT.     perfect as a media player    94x70x38mm Scope of delivery:     Aluminium housing     Acrylic cover     Screws     Silicone moulding     shorter ribbon cable for M.2  

ALLNET Kabel USB-C 3.1 Strom-/Daten Kabel zu USB 3.0 TypA 1,5m

Rock Pi 4+ Model B OP1 4GB/32GB (with dual band 2.4/5GHz WLAN/Bluetooth 5.0) with UFL connector for external antenna (176996) Rockchip OP1 64bit hexa core based SBC Small form-factor, rich feature set, outstanding design and performance. Rock Pi 4 is the perfect choice for your personal or business oriented projects. Rock Pi 4B+ product details OP1 64bit hexa core processor Dual Cortex-A72 (up to 2.0Ghz) plus quad Cortex-A53 (up to 1.5Ghz) Harvard Superscalar processor cores GPU  Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 2GB or 4GB SPI Flash not included in the scope of delivery Wifi/BT Antenna Wifi/BT with external antenna support* *an uFL connector must be soldered on the board, which will then disable the on board antenna. Connector and soldering service available in the store! Onboard eMMC module Industrial level high performance eMMC storage, 16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD note: M.2 extension board plus heat-sink is recommended for proper mounting on Rock Pi 4 "+" Display HDMI HDMI 2.0 up to 4k@60 Peripherals MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic with improved mechanics HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 8MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2.4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering via PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm Essentials You Need ROCK PI 4 Model A or Model B / B+ / OP1 PD/QC compliant power adapter with USB- C port equal or larger than 15W Keyboard & Mouse Monitor with HDMI input Heat Sink  optional M.2 extension board ______________________________________________________ Additional information & Setup instructions https://wiki.radxa.com/Rockpi4 ______________________________________

Protect and mount your Rock Pi S with this new functional case. Aluminium housing with sufficient height for GPIO-based accessories Mounting bracket for wall mounting (optional bracket required) The openings for SD card etc. on the back are locked to prevent unauthorised access. Antenna opening is available. Contents of the product: Aluminium housing Screw set Options: Dual-band antenna set Wall bracket

Rock Pi 4 zbh. EMMC 5.0 64GB also fits ODroid

Works with both ROCK PI 4A/ 4B versions. The new M.2 Extension Board v1.6 has been improved based on community feedback. Improvements: Gold-plated connectors for stable data transfer In the previous version, the connectors were simple FPC connectors. They could break easily, and the ribbon cable could be mounted incorrectly. The connectors not only prevent the cable from being inserted incorrectly, but also have a lock to prevent the connector from moving. Improved ribbon cable with mounted gold-plated connectors on both sides. The previous ribbon cable was always the subject of discussion. People complained that the cable did not provide stable data transmission because the connection through the FPC connector was not precise and good enough. They also said that interference could occur because ground wires were not used for insulation within the ribbon cable. Both of these problems were addressed. Not only does the cable now have gold-plated connectors on both sides, but the layout pays close attention to shielding between the high-speed data lines. An intelligent layout ensures that no data is lost. The connectors have additional springs to ensure a stable connection even when the board is moved. The only drawback now is the fact that the cable length can no longer be easily adjusted with replacement cables. Newly designed interface board to the M.2 connector of the Rock Pi 4 The mounting of the M.2 board with simultaneous use of the EMMC has been improved. The product includes: M.2 expansion card Mini PCB adapter to connect to the on-board M.2 connector High performance flat ribbon cable Mounting bolts and screws  

Rockchip RK3568 64bit quad-core based SBC The latest generation SBC based on the RK3568 in the traditional form factor. Outstanding features, maximum flexibility and leading development standards are sure to make this SBC the highlight of 2021 in this market segment. Rock 3A product details RK3568 64bit quad-core processor Quad Core Cortex-A55 with up to 2GHz GPU Mali G52 GPU, OpenGL ES 1.1/2.0/3.2,OpenCL 2.0,Vulkan 1.1, high-performance dedicated 2D processor NPU 0.8T NPU Memory LPDDR4  64bit dual channel LPDDR4@3200MT/s, 2, 4 & 8GB DRAM controller frequency up to 1560MHz SPI Flash 16MB SPI-Flash reliable   Wifi/BT Wifi/BT with support for external M.2 modules eMMC module (removable) Industry-grade high-performance eMMC memory, 16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 interfaces M.2 connector M button (bottom) for NVMe with PCIe 3.0 x2 lanes Note: M.2 expansion board plus heatsink is recommended for proper installation on the Rock 3 M.2 connector E button (top) for connectivity with PCIe 2.0 x1/SDIO/UART, WiFi6 cards are supported (please check the available M.2 WiFi modules) Display HDMI HDMI 2.0 up to 4k@60 1x MIPI DSI  Peripheral devices MIPI DSI 2 lanes via FPC connection HDMI and MIPI DSI can work simultaneously and support mirror or extension mode. Audio 3.5 mm jack with microphone with improved mechanics HD codec that supports up to 24-bit/96kHz audio. MIPI CSI camera MIPI CSI 2 lanes via FPC connection, supports up to 8MP camera USB 3.0 OTG x1 USB 3.0 HOST x1 Hardware switch for host/device switching, upper Dedicated USB 3.0 channel, lower Both USB3.0 ports can be configured in SATA mode with an optional SATA breakout cable (mixed USB3.0/SATA mode) USB 2.0 HOST x2 Network Wireless/Bluetooth üvia optional M.2 WiFi/ BLE modules LAN GbE LAN with PoE support an additional HAT is required for the power supply via PoE IO 40-pin extension connector : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power input - 2 x 3.3V power connection Other RTC battery connection for the time backup Power supply USB PD (new generation QC/PD protocol IC) Supports USB type C PD 2.0, 9V/2A, 12V/2A Power supply Qualcomm® Quick Charge™ Supports QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm

• Typ: Solid State Drive, 2.5", SATA 6Gb/s • Geschwindigkeit: (L) 560MB/s - (S) 530MB/s • Module: 3D-NAND TLC • TBW: 150TB • Cache: 512MB LPDDR4, SLC-Cache • Herstellergarantie: fünf Jahre oder bis Erreichen der TBW

Hutschienenhalter für Raspberrry Durch die vielen unterschiedlichen Vorbohrungen kann man mit diesem Hutschienenhalter nahezu alle Produkte von den Raspberry Pi-Produkten in diesem Halter montieren. RockPi Schraubenset 178074

Rock Pi 4 zbh. Simple Acrylic Case

Rock Pi 4 Model B 2GB (with dual band 2.4/5GHz WLAN/Bluetooth 5.0) with UFL connector for external antenna (176996)   Rockchip RK3399< Processor 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz GPU  Mali T860MP4 gpu, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 2GB Storage eMMC module Optional industrial compatible high performance eMMC module, 8G/16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD Display HDMI HDMI 2.0 up to 4k@60 Periphery MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 800MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2.4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering from PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup(optional) Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm

Rock Pi 4+ Model B OP1 4GB/64GB (with dual band 2.4/5GHz WLAN/Bluetooth 5.0) with UFL connector for external antenna (176996) Rockchip OP1 64bit hexa core based SBC Small form-factor, rich feature set, outstanding design and performance. Rock Pi 4 is the perfect choice for your personal or business oriented projects. Rock Pi 4B+ product details OP1 64bit hexa core processor Dual Cortex-A72 (up to 2.0Ghz) plus quad Cortex-A53 (up to 1.5Ghz) Harvard Superscalar processor cores GPU  Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  64bit dual channel LPDDR4@3200Mb/s, 2GB or 4GB SPI Flash not included in the scope of delivery Wifi/BT Antenna Wifi/BT with external antenna support* *an uFL connector must be soldered on the board, which will then disable the on board antenna. Onboard eMMC module Industrial level high performance eMMC storage, 16G/32G/64G/128G available Micro SD card uSD slot supports up to 128G uSD card M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD note: M.2 extension board plus heat-sink is recommended for proper mounting on Rock Pi 4 "+" Display HDMI HDMI 2.0 up to 4k@60 Peripherals MIPI DSI 2 lanes via FPC connector HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode. Audio 3.5mm jack with mic with improved mechanics HD codec that supports up to 24-bit/96kHz audio. Camera MIPI CSI MIPI CSI 2 lanes via FPC connector, support up to 8MP camera USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 Ethernet GbE Network Wireless 802.11 ac wifi 2.4/5GHz Bluetooth 5.0 LAN GbE LAN with PoE support additional HAT is required for powering via PoE IO 40-pin expansion header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Others RTC battery connector for time backup Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Size 85mm x 54mm Essentials You Need ROCK PI 4 Model A or Model B / B+ / OP1 PD/QC compliant power adapter with USB- C port equal or larger than 15W Keyboard & Mouse Monitor with HDMI input Heat Sink  optional M.2 extension board ______________________________________________________ Additional information & Setup instructions https://wiki.radxa.com/Rockpi4 ______________________________________

Rock Pi 4 Model A 4GB (without WLAN/Bluetooth and PoE)   Rockchip RK3399< Processor 64bit 6-core Dual Cortex-A72 with 1.8Ghz; Quad Cortex-A53 with 1.4Ghz GPU  Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11. Memory LPDDR4  4GB 64bit dual channel LPDDR4@3200Mb/s, 4GB Storage eMMC Module Optional industrial-grade high-performance eMMC module, 8G/16G/32G/64G/128G available Micro SD card uSD Slot supports up to 128G uSD cards M.2 SSD M.2 connector supports up to 2T M.2 NVME SSD Display HDMI HDMI 2.0 up to 4k@60 Periphery MIPI DSI 2 lanes via FPC Connector HDMI and MIPI DSI works simultaneously, supports mirror mode and extend mode. Audio 3.5mm jack with microphone support HD codec, supports up to 24-bit/96kHz audio MIPI CSI camera MIPI CSI 2 Lanes via FPC Connector, supports up to 800MP cameras USB 3.0 OTG x1 Hardware Switch für host/device switch, top USB 3.0 HOST x1 dedicated USB3.0 channel, bottom USB 2.0 HOST x2 LAN GbE LAN    IO 40-pin Extension header : - 1 x UART - 2 x SPI bus - 2 x I2C bus - 1 x PCM/I2S - 1 x SPDIF - 1 x PWM - 1 x ADC - 6 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pin Other RTC battery connection for time backup (optional) Power USB PD Support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Power Supply Qualcomm® Quick Charge™ Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A Maße 85mm x 54mm