Modular airFiber radio system built for the 11 GHz licensed frequency market that breaks free from the 5 GHz band. High-band point-to-point radio with dish antenna 11 GHz, 300+ km link range 1.2+ Gbps throughput Distinct RX and TX frequencies     Technical Specifications airFiber AF-11 Dimensions 327 x 112 x 86 mm (12.87 x 4.41 x 3.39") Weight 2.26 kg (5 lb) Mounting AF-11G35 mount compatible Hardware Networking interface (1) GbE RJ45 port (1) 10/100 MbE RJ45 port Power method Passive PoE (Pins 1, 2, 4, 5 (+) and Pins 7, 8, 3, 6 (-)) DC Power Block Power supply 50V DC, 1.2A PoE Gigabit Adapter (Included) Supported voltage range 38-56V DC RF connectors (4) SMA Weatherproof, Two per Chain: TX 0, RX 0 (Chain 0) and TX 1, RX 1 (Chain 1) (2) N-Type Waterproof, One per Duplexer Operating temperature -40 to 55° C (-40 to 131° F) Certifications CE, FCC, IC Software Modes SISO/MIMO* * Comes with (1) High-Band Duplexer pre-installed for SISO mode. For MIMO mode, a second Duplexer is available, model AF-11-DUP-H. System Max. throughput 1.2+ Gbps Max. range 300+ km Encryption 128-bit AES RF Operating frequency* 10.7-11.7 GHz *Depends on regional regulations. Max. conducted TX power* 30 dBm *Depends on regional regulations. Frequency accuracy ± 1 ppm Channel bandwidth* 3.5/5/7/10/14/20/ 28/30/40/50/56 MHz selectable** Programmable Uplink and Downlink duty cycles * For region-specific details, refer to the Compliance chapter of the airFiber AF-11FX User Guide at ui.com/download/airfiber **Channel widths may vary according to country/region regulations. airFiber AF-11G35 Dimensions 811 x 811 x 460 mm (31.9 x 31.9 x 18.1") Weight Without mount: 7.14 kg (15.74 lb) With mount: 11.85 kg (26.12 lb) Wind loading 1538 N @ 200 km/h (346 lbf @ 125 mph) Wind survivability 200 km/h (125 mph) Mounting Pole mount Frequency 10.3 to 11.7 GHz Gain 35 dBi HPOL beamwidth 2.5° VPOL beamwidth 2.5° Maximum VSWR 2:1 Polarization Default: H/V After rotating OMT: ± 45° Cross-pol isolation 35 dB Pattern regulatory ETSI 302 217-4-2, Class 3, FCC Cat B