Innenbereich

Operating voltage: AC 85-265V 18 IR LEDs: 12 watts Beam angle: 120° Range approx. 15-20 metres Wavelength: 850nm Housing: Injection-moulded aluminium in light grey (almost white) Operating temperature: -10°C to +55°C Protection class: IP65 (water jet-proof) incl. twilight switch Dimensions: (l*w*h) 115*90*105mm incl. earthing contact plug

GU10 base 4x1Watt LEDs ALU housing Operating voltage 85-265V Power consumption: 4 W Lumem: - Kelvin 850nm Infrared Beam angle 60° Dimmable: no DxH: 50mm*60mm Can be used as a replacement for conventional halogen mirror lamps. Colour: 850nm infrared Please note that the Synergy 21 LED retrofit lamps may only be operated at an operating temperature between 0-50 C°. The service life of the LEDs cannot be guaranteed in the event of deviations!  

Base: GX5.3 4x1Watt LEDs Aluminium housing Input: 12Vac / 12Vdc, Input range: 8-14Vac / 8-18Vdc Power consumption: 4 W Lumen: - Kelvin 850nm infrared Beam angle 60° Dimmable: yes DxH: 50mm*60mm Can be used as a replacement for conventional halogen mirror lamps. Colour: 850nm infrared Caution: Please only use regulated or switching power supply units with the Synergy 21 LED GX5.3/MR16 spots. Do NOT use halogen transformers or wound power supplies, otherwise there is a risk of the LED being destroyed by overvoltage. Please be sure to measure the voltage beforehand. We recommend using the Synergy 21 Digital Multimeter DM830 to measure the voltage. Please note that Synergy21 LED retrofit lamps may only be operated at an operating temperature between 0-50 C°. The service life of the LEDs cannot be guaranteed in the event of deviations!  

DC12V, 24Watt Infrared 850nm SMD3528 300LEDs Length: 5000*8*2.8mm outdoor: IP65 Adhesive tape for mounting aid on the back Can be shortened every 3 LEDs (approx. 5cm) Strip can be shortened at markings with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split strip when no current is present. Please note that LED strips must also be cooled. Ensure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed.

DC12V, 24Watt Infrared 940nm SMD3528 300LEDs Length: 5000*8.2*3mm outdoor: IP65 Adhesive tape for mounting aid on the back siliconised Can be shortened every 3 LEDs (approx. 5cm) Strip can be shortened at markings with sharp scissors. !Attention! Strip must first be checked for functionality. Only split strip when no current is present. Please note that LED strips must also be cooled. Ensure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed.

- LED G4 15x SMD total 3.5W - rear pins - infrared 850nm - 12V AC/DC - 15x SMD5050 LED - Dimensions: Ø 45mm - also suitable for short-term overvoltage 8-30VDC (e.g. caravan, boat) - Full brightness from 10V Please note that the Synergy21 LED retrofit lamps may only be operated at an operating temperature between 0-50 C°. In case of deviations, the service life of the LEDs cannot be guaranteed!

Sockel:  GX5,3 4x1Watt LEDs ALU-Gehäuse Eingang: 12Vac / 12Vdc, Eingangsbereich: 8-14Vac / 8-18Vdc Leistungsaufnahme: 4 W Lumen: - Kelvin 940nm Infrarot Abstrahlwinkel 60° Dimmbar: ja DxH: 50mm*60mm Können als Ersatz für herkömmliche Halogen-Spiegellampen verwendet werden. Farbe: 940nm Infrarot Achtung: Bitte verwenden sie bei den Synergy 21 LED GX5,3/MR16 Spots ausschließlich geregelte, bzw. Schalt - Netzteile. Verwenden sie KEINE Halogentrafos oder gewickelte Netzteile, sonst besteht die Gefahr der Zerstörung der LED durch Überspannung. Bitte messen sie vorher unbedingt die Spannung. Wir empfehlen zum Messen der Spannung das Synergy 21 Digital Multimeter DM830. Bitte beachten Sie, dass die Synergy21 LED Retrofit Leuchtmittel nur bei einer Betriebstemperatur zwischen 0-50 C° betrieben werden dürfen. Bei Abweichungen kann die Lebensdauer der LEDs nicht garantiert werden!