LED stripes 24V single coloured

Voltage: 24V, max.1A Watt: 24W±10% Light colour: warm white, 3000K±250k Brightness: 2160lm CRI>90 Beam angle: 120° Protection class: IP20 Number of LEDs: 300*3528SMD Dimensions: 5000*8*3 mm PCB colour: white, open cable end Operating temperature: -25°C to +40°C Weight: 0.090 kg Can be shortened every 6 LEDs Adhesive tape: yes 3M on the back Energy efficiency class: A kWh/1000h: 24 Strip can be shortened at the cut marks with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split the strip when no current is present. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips

LED Flex Strip neutral white, DC24V, max. 2A, 48W ± 10%, 600Leds, 120°, 3528SMD Lumen: 3600 4100-4400K CRI: >80 Length: 5000*8*2.5mm Adhesive tape for mounting aid on the back indoor Can be shortened every 6 LEDs Strip can be shortened at marking points with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split strip when no current is present. Energy efficiency class: G kWh/1000h: 48 Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed.

LED Flex Strip warm white, DC24V, max. 2A, 48W ± 10%, 600Leds, 120°, 3528SMD Lumen: 3500 2700K ±250 Length: 5000*8*2.5mm, with adhesive tape indoor Energy efficiency class: A+ kWh/1000h: 48 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed.

LED Flex Strip neutral white, PCB white DC24V, max. 4.13A, 96W ± 10%, 19.8W/m 0.9A/m 300Leds, 120°, 5730SMD, can be shortened every 6 LEDs Length: 5000*10*2mm Lumen: 10250lm, 2050lm/m Kelvin: 4200K ±250 Protection class: IP20, indoor Adhesive tape for mounting aid on the back Energy efficiency class: A+ kWh/1000h: 105.6 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed.

LED Flex Strip cold white, PCB white DC24V, max. 4.13A, 96W ± 10%, 300Leds, 120°, 5730SMD, can be shortened every 6 LEDs Length: 5000*10*2mm, Lumen: 8650, 1730lm/m Kelvin: 6000K ±250 Protection class: IP20, indoor Adhesive tape for mounting aid on the back Energy efficiency class: A kWh/1000h: 105.6 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed.

LED Flex Strip cold white, DC24V, max. 2A, 48W, 600Leds, 120°, 3528SMD Length: 5000*10.8*4mm, (strip width 10.8mm, end cap width 12mm) Lumen: 975Lm/M, total: 4875 Kelvin: 600K CRI: >95 Protection class: IP68, outdoor incl 3M tape Suitable down to -25°C! Strip can be cut at marking marks with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split strip when no current is present. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed.

LED Flex Strip super warm white, Kelvin: 2500K ±250 DC24V, max 4A, max power 72W, 14,4W/m 600Leds, 5000lm, 120°, 3528SMD can be shortened every 6 LEDs (5cm) Length: 5000*10*2.5mm, Adhesive tape for mounting aid on the back open cable end indoor Energy efficiency class: A kWh/1000h: 96 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guaranteed.

LED Flex Strip warm white, PCB white, S-shape DC24V, max. 3A, 36W ± 10%, 7.2W/M 300Leds, 120°, 2835SMD, can be shortened every 6 LEDs Length: 5000*5*3mm, Lumen: 5400 ± 10% 3000K ±250 indoor open cable end Adhesive tape for mounting aid on the back Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed.

Synergy 21 LED Flex Strip 2116 Länge: 5m Spannung: 24V Watt: 14,4W/m, 72W Lichtfarbe: warmweiss , 2700K, CRI>90 (R9>60) Helligkeit: 1260lm/m Gesamt: 6300lm, 87,5Lm/W Abstrahlwinkel: 120° Schutzklasse: IP20 LED Anzahl: 140*2116SMD/m, Gesamt: 700LEDs Maße: 5000*8*1mm Kürzbar alle 7 LEDs 50mm Klebeband: ja 3M rückseitig Arbeitstemperatur: -25°C bis +40°C Energieeffizienzklasse: F Bitte beachten sie, dass auch LED Streifen gekühlt werden müssen. Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 40°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden. Der Einbau muss von einem qualifizierten Fachpersonal abgenommen werden 

Synergy 21 LED Flex Strip 2110 2110=LED chip size 2.1mm x 1.0mm   Length: 5m Voltage: 24V, (12V available on request) Watt: 7,2W/m, 36W Light colour: neutral white, 4000K, CRI>90 (R9>60) Brightness: 677lm/m Total: 3385lm Beam angle: 120° Protection class: IP20 Number of LEDs: 70*2110SMD/m, total: 350LEDs Dimensions: 5000*8*1.4mm PCB colour: white, Operating temperature: -25°C to +40°C Shortenable every 7 LEDs 100mm Adhesive tape: yes 3M on the back Energy efficiency class: A+ kWh/1000h: 39.6 Strip can be shortened at the cut marks with sharp scissors. !Attention! Strip must first be checked for functionality. Only split the strip when no current is present. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips.

Synergy 21 LED Flex Strip SMD2835 series   Length: 5m Voltage: 24V, Watt: 9,6W/m, 48W Light colour: warm white, 3000K, CRI>90 Brightness: 700lm/m, total: 3500lm Beam angle: 120° Protection class: IP62 Number of LEDs: 140*2835HX/m, total: 700LEDs Dimensions: 5000*8*5 mm PCB colour: white, open cable end red black (150±5mm) Working temperature: -25°C to +40°C Can be shortened every 6 LEDs 5cm Adhesive tape: yes 3M on the back Energy efficiency class: A kWh/1000h: 48 Strip can be shortened at the cut marks with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split the strip when there is no current. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips.

Synergy 21 LED Flex Strip 2835 Series 2835=LED chip size 2.8mm x 3.5mm   Length: 5m Voltage: 24V DC Watt: 14,4W/m, 72W Light colour: Warm white, 3000K, CRI>97 Brightness: 110Lm/W, 1584LM/m Total: 7920Lm Beam angle: 120° Protection class: IP20 Number of LEDs: 80*2835SMD/m, total: 400LEDs Dimensions: 5000*10*2 mm PCB colour: white, open cable end red black (150±5mm) Operating temperature: -25°C to +40°C Weight: 0.500kg Can be shortened every 6 LEDs, 100mm Adhesive tape: yes 3M on the back Energy efficiency class: A kWh/1000h: 79.2 Strip can be shortened at the cut marks with sharp scissors. !Attention! Strip must first be checked for functionality. Only split the strip when no current is present. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips.

Synergy 21 LED Flex Strip 2110 super ww 2110=LED Chip Grösse 2,1mm x 1,0mm   Länge: 5m Spannung: 24V,  Watt: 4,8W/m, 24W Lichtfarbe: super warmweiss , 2700K, CRI>90 (R9>60)  Helligkeit: 500lm/m , Gesamt: 2500lm Abstrahlwinkel: 120° Schutzklasse: IP20 LED Anzahl: 280*2110SMD/m, Gesamt: 1400LEDs Maße: 5000*10*1,4 mm PCB-Farbe: weiss, Arbeitstemperatur: -25°C bis +40°C Kürzbar alle 7 LEDs 25mm Klebeband: ja 3M rückseitig Energieeffizienzklasse: A+ kWh/1000h: 26,4 Strip an den Schnittmarken mit scharfer Schere kürzbar. !Achtung! Strip muss zuvor auf Funktionalität überprüft werden. Strip nur teilen wenn kein Strom anliegt. Unser 3M Klebeband ist gut haftend, aber trotzdem nur als Montagehilfe anzusehen.  Es gibt eine vielzahl an Befestigungsmöglichkeiten, wie Clips, dauerelastischer Montagekleber, Kabelbinder, etc. Bitte beachten sie, dass auch LED Streifen gekühlt werden müssen. Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 40°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.

Synergy 21 LED Flex Strip 160 Serie Spannung: 24V,  Watt: 9,6W/m 48W gesamt Lichtfarbe: super warmweiss , 3000K, CRI>90  Helligkeit: 120Lm/W, gesamt: 5760LM Abstrahlwinkel: 120° Schutzklasse: IP20 LED Anzahl: 80LEDs/m, Gesamt: 400LEDs LED Type: 2835 Schnittmaß:50mm Maße LED Strip: 5000*8*1 mm Arbeitstemperatur: -25°C bis +40°C Klebeband: ja 3M rückseitig Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 40°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.

Synergy 21 LED Flex Strip 2110 2110=LED chip size 2.1mm x 1.0mm   Length: 5m Voltage: 24V Watt: 4,8W/m, 24W Light colour: neutral white, 4000K, CRI>90 (R9>60) Brightness: 500lm/m , Total: 2500lm Beam angle: 120° Protection class: IP20 Number of LEDs: 140*2110SMD/m, total: 700LEDs Dimensions: 5000*8*1.4 mm PCB colour: white, Operating temperature: -25°C to +40°C Can be shortened every 100mm Adhesive tape: yes 3M on the back Energy efficiency class: A+ kWh/1000h: 26.4 Strip can be shortened at the cut marks with sharp scissors. !Attention! Strip must first be checked for functionality. Only split the strip when no current is present. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips.

LED Flex Strip warm white, DC24V, max. 6A, max power 144W, 600Leds, SMD5050, 9300lm, 120° 3000K ±250 length: 5000*20*2,2mm indoor Adhesive tape for mounting aid on the back Strip can be shortened at marking points with sharp scissors. !Attention! Strip must first be checked for functionality. Only split the strip when no current is present. Energy efficiency class: A kWh/1000h: 144 Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guaranteed.

Synergy 21 LED Flex Strip 2835 2835 LED Chip   Length: 5m Voltage: 24V Watt: 15W/m, 75W Light colour: super-warm white, 2500K, CRI>90 Colour shift towards 2700K possible due to IP68 protective jacket Brightness: 1100lm/m Total: 5500lm Beam angle: 120° Protection class: IP68 Number of LEDs: 140*2835SMD/m, total: 700LEDs Dimensions: 5000*13*3mm Operating temperature: -25°C to +40°C Can be shortened every 7 LEDs 50mm Adhesive tape: yes 3M on the back Energy efficiency class: A kWh/1000h: 79.2 Strip can be shortened at the cut marks with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split the strip when no current is present. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips. Fig. similar

Synergy 21 LED Flex Strip UL Series ULS=Ultra Long Series   Voltage: 24V, max5,8A Watt: 140W±10% Light colour: neutral white, 4250K±250k Brightness: 13950lm Beam angle: 120° Protection class: IP20 Number of LEDs: 600*2835SMD Dimensions: 10000*10*3 mm PCB colour: white, open cable end (360±5mm) Operating temperature: -25°C to +40°C Weight: 0.500kg Can be shortened every 6 LED 10cm Adhesive tape: yes 3M on the back Energy efficiency class: A kWh/1000h: 154 Strip can be shortened at the cut marks with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split the strip when no current is present. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips

Synergy 21 LED Flex Strip 2116 Watt: 14.4W/m, 72W Light colour: warm white, 2700K, CRI>90 (R9>60) Brightness: 1195lm/m Beam angle: 120° Protection class: IP67 Number of LEDs: 140*2116SMD/m, total: 700LEDs Dimensions: 5000*10*4mm PCB colour: white, Operating temperature: -25°C to +40°C Shortenable every 7 LEDs 50mm Adhesive tape: yes 3M on the back Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed. No guarantee can be given for overheated LED strips.

Synergy 21 LED Flex Strip 2116 Watt: 20,W/m, 100W Light colour: warm white, 3000K, CRI>90 (R9>60) Brightness: 1330lm/m Total: 6650lm Beam angle: 120° Protection class: IP20 Number of LEDs: 280*2116SMD/m, total: 1400LEDs Dimensions: 5000*10*1mm PCB colour: white, Working temperature: -25°C to +40°C Shortenable every 7 LEDs 25mm Adhesive tape: yes 3M on the back Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed. No guarantee can be given for overheated LED strips.

LED Flex Strip warm white, DC24V, max. 3A, 72W, 300Leds, 120°, 5050SMD CRI>90 Length: 5000*12.9*5mm, Lumen: 4500 3000K ±250 outdoor, filled tube, IP68 can be shortened: every 5 cm open cable end Adhesive tape for mounting aid on the back Suitable up to -25°C! Energy efficiency class: A kWh/1000h: 72 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guaranteed.

Synergy 21 LED Flex Strip  80 Serie Spannung: 24V,  Watt: 4,8W/m 24W gesamt Lichtfarbe: neutralweiss , 4000K, CRI>90  Helligkeit: 130Lm/W, gesamt: 3120LM Abstrahlwinkel: 120° Schutzklasse: IP20 LED Anzahl: 80LEDs/m, Gesamt: 400LEDs LED Type: 2835 Schnittmaß:100mm Maße LED Strip: 5000*8*1,5 mm Arbeitstemperatur: -25°C bis +40°C Klebeband: ja 3M rückseitig Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 40°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.

Osram Flex Strip VF06A-W4F-827 52W 24V FS1 Länge: 6m Spannung: 24V, Watt: 8,6W/m, 52W Lichtfarbe: warmweiss , 2700K, CRI>80 Helligkeit: 600lm/m , Gesamt: 3600lm Abstrahlwinkel: 120° Schutzklasse: IP20 Maße: 6000*8*1,5 mm PCB-Farbe: weiss, Arbeitstemperatur: -20°C bis +65°C Klebeband: ja 3M rückseitig Energieeffizienzklasse: A kWh/1000h: 57,2 Strip an den Schnittmarken mit scharfer Schere kürzbar. !Achtung! Strip muss zuvor auf Funktionalität überprüft werden. Strip nur teilen wenn kein Strom anliegt. Unser 3M Klebeband ist gut haftend, aber trotzdem nur als Montagehilfe anzusehen. Es gibt eine vielzahl an Befestigungsmöglichkeiten, wie Clips, dauerelastischer Montagekleber, Kabelbinder, etc. Bitte beachten sie, dass auch LED Streifen gekühlt werden müssen. Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 40°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.

Synergy 21 LED Flex Strip 2216 series Voltage: 24V,  Watt: 7.2W/m, 36W Light colour:  warm white, 2700K, CRI>90  Brightness: ww: 630lm/m  Beam angle: 120° Protection class: IP20 Number of LEDs: 70*2216SMD/m, total: 350LEDs Dimensions: 5000*8*2.2 mm Working temperature: -25°C to +40°C Coolable every 7LEDs 10cm Adhesive tape: yes 3M on the back Make sure that the LED strip does not exceed the working temperature of 40°C, otherwise the service life cannot be guaranteed. No guarantee can be given for overheated LED Strips.