Meetingroom Tablet

ALLNET Meeting Room LED Tablet 10 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)                                                                                      Update to Android 10 possible: write to support@allnet.de Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Due to the NFC, time recording terminals can also be implemented very well or info terminals with ID, such as multi-party residential complexes.  Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera we did not address. AIDA time works according to manufacturer with our part numbers 174715/174716/174717/174888 u. 182897 The API/SDK for NFC/RFID and LED are available on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface that for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols - NFCIP-1, NFCIP-2 protocol (see [8] and [11]) - ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) - NFC Forum T3T via host interface - ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  - FeliCa PCD mode - MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) - NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) - ISO/IEC 15693/ICODE VCD mode (see [9]) For further information please refer to the NFC data sheet. System CPU   RK3288,Quad-core cortex A17,1.6G RAM   2GB Internal memory  16GB Operation system Android 8.1     Touch screen 10-Point capacitive touch Display Panel   10.1"LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio ,16:10 Network WiFi   2,4/5GHz 802.11a/b/g/n/ac Ethernet   100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot   SD card USB    USB Host Micro USB  Micro USB OTG USB    USB for serial RJ45 with POE RJ45  POE   IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo   jpeg Other VESA   204.5mm NFC   N/A(Optional to add NFC with 13.56M frequency)/RFID NXP Desfire Camera   5.0M/P,Front camera Microphone Microphone Speaker   2*1.5W LED Light bar LED light bar with RGB and mixed color Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter   Adapter,12V/1.5A User manual yes Touch Power Button Touch Button in Front to switch on and off if mounted inside a wall.   Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  275.36mm 170.36mm 25mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG              

ALLNET Meeting Room LED Tablet 13 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)                                                                                            Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Through the NFC can also be implemented very well time recording terminals or info terminals with ID, such as multi-party apartment complexes.    Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera is not addressed AIDA time     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer We will gladly provide the API/SDK for NFC/RFID and LED on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface, for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU  RK3288,Quad-core cortex A17,1.6G RAM  2GB Internal memory  16GB Operation system Android 8.1/10    Display Touch screen 10-Point capacitive touch Panel  13" LCD panel Resolution 1920x1080 Active area 293(H)x164mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:9 Network WiFi  2.4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56M frequency)/RFID NXP Desfire Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/2.5A User manual yes          

ALLNET Meeting Room LED Tablet 15 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)                                                                                      Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Through the NFC can also be implemented very well time recording terminals or info terminals with ID, such as multi-party apartment complexes.  Currently tested Android time terminal software:  PDS Zeit funktioniert, Configfile muss aber manuell eingespielt werden, Kamera wir nicht angesprochen AIDA-Zeit     funktioniert laut Hersteller mit unseren Artikelnummern 174715/174716/174717/174888 u. 182897 We will gladly provide the API/SDK for NFC/RFID and LED on request. Specifications NFC: NXP PN7150 PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface, for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android. - Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet.

ALLNET Meeting Room RGB LED Tablet 10 inch RK3568 Android 11 and NFC, colour black                                                                       Includes power supply unit and integrated snap-in wall bracket with theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, such as multi-party residential complexes. Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera is not addressed AIDA time     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer We are happy to provide the API/SDK for NFC/RFID and LED on request. For further information, please refer to the NFC data sheet. System CPU RK3568,Quad-core cortex A55,1.6G RAM 4GB Internal memory  16GB Operation system Android 11 Display Touch screen 10-Point capacitive touch Panel 10.1"LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:10 Network WiFi 2.4/5GHz 802.11a/b/g/n Ethernet 100M/1000M ethernet Buletooth Bluetooth 5.0 Interface Card slot SD card USB  USB Host Micro USB  Micro USB OTG USB  USB for serial RJ45 with POE RJ45  POE IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo jpeg, png, etc. Other VESA 75x75mm NFC NFC with 13.56MHz Camera 2.0M/P,Front camera Microphone Microphone Speaker 2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter Adapter,12V/1.5A User manual yes     Unit (Without packaging) Giftbox (With Packaging) Carton 5pcs/CTN L  W  H  L  W  H  L  W  H  259.36mm 178.36mm 28mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG Net(kg) 2.3KG  

ALLNET meeting room RGB LED tablet 8 inch RK3568 Android 11 and NFC, colour black , compatible with ReinerSCT Includes power supply unit and integrated snap-in wall mount with theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, such as multi-party residential complexes. We are happy to provide the API/SDK for NFC/RFID and LED on request. For further information, please refer to the NFC data sheet. System CPU  RK3568,Quad-core cortex A55,1.6G RAM  8GB Internal memory  16GB Operation system Android 11    Display Touch screen 10-Point capacitive touch Panel  8" LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:10 Network WiFi  2.4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 5.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56MHz Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/1.5A User manual yes       Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  259.36mm 178.36mm 28mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG              

Extension cable DC 5.5 x 2.1mmmm plug -->DC plug 4.0mm x 1.7mm, 3m length for article number 154446

ALLNET Meeting Room RGB LED Tablet 10 Inch RK3568, 8GB/32GB, WiFi, Android 11, NFC, Black, MeetOne-101-C0 Includes power adapter and integrated snap-in wall mount with theft protection. RGB LED for displaying warning signals, meeting room availability, etc. Can be easily converted into time recording terminals or info terminals with ID, such as multi-party housing estates using NFC. We will provide the API/SDK for NFC/RFID and LED on request. For further information, please refer to the NFC datasheet. System CPU  RK3568,Quad-core cortex A55,1.6G RAM  8GB Internal memory  16GB Operation system Android 11    Display Touch screen 10-Point capacitive touch Panel  10" LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:10 Network WiFi  2,4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 5.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56MHz Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed color Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/1.5A User manual yes       Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  259.36mm 178.36mm 28mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG          

ALLNET meeting room LED tablet 13 inch RK3399 Android 10 and RFID (NXP Mifare, Desfire) WITHOUT INTEGRATED CAMERA !!! Includes power supply and integrated snap-in wall mount with theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, e.g. multi-party residential complexes. Currently tested Android time terminal software: PDS Time works, but config file must be imported manually, camera is not addressed AIDA time works according to the manufacturer with our article numbers 174715/174716/174717/174888 and 182897 We are happy to provide the API/SDK for NFC/RFID and LED on request. NFC specifications: NXP PN7150 PN7150 is a fully-fledged NFC controller solution with integrated firmware and NCI interface for contactless communication at 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on the knowledge gained from previous NXP NFC device generations. It is the ideal solution for the rapid integration of NFC technology into any application, especially those working with O/S environments such as Linux and Android. - Full NFC Forum compliance with small form factor antenna - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to the main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - Highly efficient integrated power management unit (PMU) - Supported RF protocols - NFCIP-1, NFCIP-2 protocol (see [8] and [11]) - ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) - NFC Forum T3T via host interface - ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP - FeliCa PCD mode - MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) - NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) - ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU RK3399 RAM 4GB (4GB from batch 2023) Internal memory 32GB Operation system Android 10 Display Touch screen 10-point capacitive touch Panel 13" LCD panel Resolution 1920x1080 Active area 293(H)x164mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:9 Network WiFi 2.4/5GHz 802.11a/b/g/n Ethernet 100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB USB host Micro USB Micro USB OTG USB USB for serial RJ45 with POE RJ45 POE IEEE802.3at Power jack DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo jpeg, png, etc. Other VESA 204.5mm NFC NFC with 13.56M frequency)/RFID NXP Desfire Camera no built-in camera Microphone Microphone Speaker 2*1.5W LED light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter Adapter,12V/2.5A User manual yes    

ALLNET Meeting Room RGB LED Tablet 10 inch RK3568 LTE, Android 11 and NFC, colour black, compatible with ReinerSCT                                                                  Includes power supply unit and integrated snap-in wall bracket with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, such as multi-party residential complexes. We are happy to provide the API/SDK for NFC/RFID and LED on request. For further information, please refer to the NFC data sheet. System CPU  RK3568,Quad-core cortex A55,1.6G RAM  8GB Internal memory  16GB Operation system Android 11    Display Touch screen 10-Point capacitive touch Panel  10.1"LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:10 Network WiFi  2.4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 5.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56MHz Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/1.5A User manual yes       Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  259.36mm 178.36mm 28mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG              

***Used goods - B-goods, fully functional**** ALLNET Meeting Room LED Tablet 13 inch RK3399 Android 10 and RFID (NXP Mifare, Desfire)                                                                                            Includes power supply unit and integrated snap-in wall bracket with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms, etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, such as multi-party residential complexes. Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera is not addressed AIDA time     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer We are happy to provide the API/SDK for NFC/RFID and LED on request. NFC specifications: NXP PN7150 PN7150 is a fully-fledged NFC controller solution with integrated firmware and NCI interface for contactless communication at 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on the knowledge gained from previous NXP NFC device generations. It is the ideal solution for the rapid integration of NFC technology into any application, especially those working with O/S environments such as Linux and Android. - Full NFC Forum compliance with small form factor antenna - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to the main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - Highly efficient integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU  RK3399 RAM  2GB (4GB from batch 2023) Internal memory  16GB Operation system Android 10    Display Touch screen 10-Point capacitive touch Panel  13" LCD panel Resolution 1920x1080 Active area 293(H)x164mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:9 Network WiFi  2.4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56M frequency)/RFID NXP Desfire Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/2.5A User manual yes          

Meetingraum-Tablet mit Deskbird – Smarte Raumbuchung neu gedacht Optimale Raumnutzung trifft intuitive Benutzererfahrung Das Android-basierte Meetingraum-Tablet mit Deskbird-Software ist die ideale Lösung für moderne Unternehmen, die ihre Meetingräume effizienter verwalten und zugleich Mitarbeitenden eine einfache und nahtlose Nutzererfahrung bieten wollen. Die integrierte Wandhalterung sowie die umlaufende RGB-Statusbeleuchtung ermöglichen eine klare Raumerkennung und sofortige Buchungsübersicht direkt an der Tür. Inkl. 12 monatige Deskbird Rooms Lizenz 1x Preise und Infos: https://www.deskbird.com/de/lp/konferenzraum-verwaltung                                                                                                                                                                                                                    Highlights & USPs Best-in-Class Nutzerfreundlichkeit – Einfach. Intuitiv. Konsistent. Deskbird begeistert mit einer durchgängig intuitiven Nutzerführung – auf jedem Gerät: Mobile First: 40 % aller Buchungen laufen über die iOS- und Android-Apps. 30 % der Buchungen erfolgen direkt aus der Microsoft Teams-App. 30 % über die Web-App.Das bedeutet: Ein konsistentes Erlebnis über alle Plattformen hinweg – perfekt für hybride Teams und internationale Unternehmen Nahtlose Integration in Ihre Systemlandschaft Deskbird lässt sich vollständig in bestehende IT-Infrastrukturen einbinden: Native Integration in Outlook, Google Workspace und Microsoft Teams Schnittstellen zu HR-Systemen, Zutrittskontrollen, Parkraummanagement und über 200 weitere Tools ISO27001-zertifiziert, DSGVO-konform und mandantenfähig Skalierbarkeit & Entwicklungsgeschwindigkeit Mit über 100 Mitarbeitenden, davon mehr als 50 in Produkt & Entwicklung, ist Deskbird optimal aufgestellt, um schnell neue Features umzusetzen: Neu eingeführtes Besuchermanagement-Modul Modular erweiterbar: Desks, Rooms, Workforce, Visitors, u.v.m. Ideal für Unternehmen mit dynamischen Anforderungen Internationale Kompetenz Deskbird wird europaweit und darüber hinaus eingesetzt – darunter in den USA und Australien: Unterstützung nationaler Besonderheiten wie AM/PM-Zeitformat, Homeoffice-Policies, Betriebsratsanforderungen Erfahrung mit internationalen Rollouts für globale Organisationen Technische Features des Tablets Android-basiert mit stabiler Kiosk-Integration Integrierte Wandhalterung für einfache Installation Umlaufende RGB-Beleuchtung zur Visualisierung des Raumstatus (frei / gebucht / bald belegt) Unterstützung für Check-In vor Ort, Raumbuchung per QR-Scan oder direkt auf dem Display Kompatibel mit Deskbird's Kiosk-Modus für spontane Buchungen, Statusanzeige und Check-in Typische Anwendungsfälle Optimierung der Raumbelegung durch automatische Freigabe bei No-Shows (nach 15 Minuten ohne Check-in) Erweiterte Raumsuche nach Teilnehmerzahl, Ausstattung und Meetingart Raumverwaltung per Drag & Drop in der App oder Web-Oberfläche Verknüpfung mit Catering-, Service- und Reinigungsplänen für effiziente Prozesse Fazit Das Meetingraum-Tablet mit Deskbird bietet mehr als nur Raumbuchung – es ist ein ganzheitliches Tool für das digitale Arbeitsplatzmanagement. Von intuitiver Bedienung über tiefe Integration bis zur internationalen Skalierung: Diese Lösung setzt Maßstäbe in Funktionalität, Nutzerfreundlichkeit und Zukunftssicherheit.   Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  259.36mm 178.36mm 28mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG              

ALLNET meeting room RGB LED tablet 8 inch RK3568 Android 13 and NFC, colour black , compatible with ReinerSCT Includes power supply unit and integrated snap-in wall mount with theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. The NFC also makes it very easy to implement time recording terminals or info terminals with ID, such as multi-party residential complexes. The API/SDK for NFC/RFID and LED can be found at https://firmware.allnet.de For further information, please refer to the NFC data sheet. System CPU RK3568,Quad-core cortex A55,1.6G RAM 8GB Internal memory  32GB Operation system Android 13 Display Touch screen 10-point capacitive touch Panel 8" LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect ratio 16:10 Network WiFi 2.4/5GHz 802.11a/b/g/n Ethernet 100M/1000M ethernet Buletooth Bluetooth 5.0 Interface Card slot SD card USB  USB host Micro USB  Micro USB OTG USB  USB for serial RJ45 with POE RJ45  POE IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo jpeg, png, etc. Other VESA 204.5mm NFC NFC with 13.56MHz Camera 2.0M/P,Front camera Microphone Microphone Speaker 2*1.5W LED light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter Adapter,12V/1.5A User manual yes     Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  259.36mm 178.36mm 28mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG        

ALLNET Meetingraum RGB LED Tablet 13 Zoll RK3576 Android 16 and NFC/RFID Farbe black System CPU RK3576S Quad core cortex A53+Quad core cortex A72 RAM 4GB Internal memory  32GB Operation system Android 16     Touch screen 10-point capacitive touch Display Panel 10.1"LCD  panel Panel Type  IPS Resolution 1280*800 Display Colours 16.7M Colours Viewing angle R/L 85/85, U/D 85/85 Display mode Normally black  Contrast ratio 1500:1 Response Time 25ms  Back-light Type ELed Luminance 280cd/m2 Aspect Ratio ,16:10 Network WiFi IEEE 802.11a/b/g/n/ac/ax Buletooth Bluetooth 5.4 Ethernet 10M/100M/1000M ethernet Interface SIM slot 4G Flow Card SD slot SD card ,Max support to 64GB Earphone 3.5mm earphone + Microphone USB  USB 3.0 host USB  USB for serial (TTL Level ) ,Optional USB Host RJ45  Ethernet interface Type-C Only supports ADB function Power jack  DC power input Media play Video format MPEG-1,MPEG-2,MPEG-4,H.265,H.264,VP9,AV1, AVS2,MVC,AVC ,etc., support up to 4K Audio format MP3/WMA/AAC/WAV/OGG, etc Photo JPEG/PNG/GIF,etc Other Product Colours White/Black VESA 75*75 mm Button Power G-sensor Support  90 degrees Speaker 2*2W Microphone Single microphone NFC Optional,13.56MHz,ISO/IEC 18092, ISO/IEC 21481, ISO/IEC 14443 A&B, ISO/IEC 15693, Japanese Industrial Standard (JIS) (X) 6319-4, MIFARE Classic encrypted tags and cards RFID Optional ,125k,ISO/IEC 11784/11785,EM4100,TK4100/GK4100 LED light bar LED light bar with RGB and mixed colour Camera Routine  angle  5.0MP with mipi 4G Moduel Optional   Language Multi-language Certificates CCC/CE/FCC POE Support IEEE802.3at,up to 30W   Working Surrounding Working Temperature 0°C---40°C Storage Temperature -20°C---60°C Working Humidity 20~80%RH Storage Humidity 10~95%RH Accessories Adapter Adapter,12V/1.5A User manual *1

NFC Detail: Item Type Tested 1 ISO/IEC 18092(NFCIP-1) yes 2 ISO/IEC 21481(NFCIP-2) yes 3 ISO/IEC 14443A yes 4 ISO/IEC 14443B yes 5 ISO/IEC 15693 yes 6 Mifare Classic yes 7 Mifare Ultralight yes 8 MIFARE DESFire EV1/ EV2 yes 9 Sony FeliCa yes System CPU       RK3576S Quad core cortex A53+Quad core cortex A72 RAM       4GB Internal memory      32GB Operation system     Android 16     Touch screen     10-Point capacitive touch Display Panel       10.1"LCD  panel Panel Type      IPS Resolution     1280*800 Display Colors     16.7M Colors Viewing angle     R/L 85/85, U/D 85/85 Display mode     Normally black  Contrast ratio     1500:1 Response Time     25ms  Back-light Type     ELed Luminance     280cd/m2 Aspect Ratio     ,16:10 Network WiFi       IEEE 802.11a/b/g/n/ac/ax Buletooth       Bluetooth 5.4 Ethernet       10M/100M/1000M ethernet Interface SIM Slot       4G Flow Card SD Slot SD card ,Max support to 64GB Earphone     3.5mm earphone + Microphone USB        USB 3.0 host USB        USB for serial (TTL Level ) ,Optional USB Host RJ45        Ethernet interface Type-C       Only supports ADB function Power jack      DC power input Media play Video format     MPEG-1,MPEG-2,MPEG-4,H.265,H.264,VP9,AV1, AVS2,MVC,AVC ,etc., support up to 4K Audio format     MP3/WMA/AAC/WAV/OGG, etc Photo       JPEG/PNG/GIF,etc Other Product Colors     White/Black VESA       75*75 mm Button       Power G-sensor       Support  90 degrees Speaker       2*2W Microphone     Single microphone NFC       Optional,13.56MHz,ISO/IEC 18092, ISO/IEC 21481, ISO/IEC 14443 A&B, ISO/IEC 15693, Japanese Industrial Standard (JIS) (X) 6319-4, MIFARE Classic encrypted tags and cards RFID       Optional ,125k,ISO/IEC 11784/11785,EM4100,TK4100/GK4100 LED light bar     LED light bar with RGB and mixed color Camera       Routine  angle  5.0MP with mipi 4G Moduel     Optional   Language     Multi-language Certificates     CCC/CE/FCC POE       Support IEEE802.3at,up to 30W   Working Surrounding Working Temperature     0°C---40°C Storage Temperature     -20°C---60°C Working Humidity     20~80%RH Storage Humidity     10~95%RH Accessories Adapter       Adapter,12V/1.5A User manual     *1

ALLNET Meetingraum RGB LED Tablet 10 Zoll RK3568 Android 11 und NFC, Farbe schwarz                                                                    Inklusive Netzteil und integrierter snap-in Wandhalterung mit Diebstahlschutz. RGB LED zur Anzeige z.B. von Warnsignalen, Belegung von Meetingräumen etc. Durch das NFC lassen sich auch sehr gut Zeiterfassungsterminals umsetzen oder Info Terminals mit ID, wie z.B. Mehrparteien Wohnanlagen.  Die API/SDK für NFC/RFID und LED stellen wir gerne auf Anfrage zur Verfügung. Weitere Informationen entnehmen Sie bitte dem NFC Datenblatt. System CPU  RK3568,Quad-core cortex A55,1.6G RAM  8GB Internal memory  16GB Operation system Android 11    Display Touch screen 10-Point capacitive touch Panel  10.1"LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:10 Network WiFi  2,4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 5.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56MHz Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed color Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/1.5A User manual yes       Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  259.36mm 178.36mm 28mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG              

***USED B-Ware*** Good condition, fully functional! ALLNET Design LED Tablet 10 inch RK3568 Android 11 and NFC, meeting room tablet black Includes power supply and ultra-flat wall mount. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc. Supported NFC cards:        Type                              Tested 1    ISO14443A                     OK  2    ISO14443B                     OK  3    ISO 15693                      OK  4    Mifare C lassic                OK  5    Mifare C lassic 4K            OK  6    Mifare C lassic 8K           OK  7    Mifare Ultralight               OK  8    Sony Felica                     OK  9    MIFARE DESFire EV2    OK  10  MIFARE DESFire EV1   OK    System CPU Quad-core ARM Cortex-A55, Neon and FPU RAM 4GB Internal memory 16GB Operation system 11   Touch screen 10-Point capacitive touch Display Panel 10.1" LCD IPS panel Resolution 1280x800 Active area 216.96(H)x135.6mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 250cd/m2 Aspect Ratio 16:10 Network WiFi 802.11a/b/g/n 2.4/5GHz Ethernet 100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB USB Host Micro USB Micro USB OTG USB USB for serial RJ45 with POE RJ45 POE IEEE802.3at/af Power jack DC power input Earphone 3.5mm earphone + Micphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo jpeg   VESA 75x75mm Speaker 2*1.5W LED Light bar LED Light bar Camera 2.0M/P,Front camera Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter Adapter,12V/1.5A User manual yes

*USED device* ALLNET Meeting Room LED Tablet 10 inch RK3288  NFC/RFID (NXP Mifare, Desfire)                                                                                         Includes power supply unit and integrated wall bracket with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms, home automation with API. The NFC is also ideal for implementing time recording terminals or info terminals with ID, e.g. multi-party residential complexes. Currently tested Android time terminal software:  PDS time works, but config file must be imported manually, camera is not addressed AIDA time     works with our article numbers 174715/174716/174717/174888 and 182897 according to the manufacturer   We are happy to provide the API/SDK for NFC/RFID and LED on request. - Full NFC Forum compliance with small form factor antenna - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to the main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - Highly efficient integrated power management unit (PMU) - Supported RF protocols – NFCIP-1, NFCIP-2 protocol (see [8] and [11]) – ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) – NFC Forum T3T via host interface – ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP  – FeliCa PCD mode – MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) – NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) – ISO/IEC 15693/ICODE VCD mode (see [9]) For more information, please refer to the NFC data sheet. System CPU  RK3288,Quad-core cortex A17,1.6G RAM  2GB Internal memory  16GB Operation system Android 8.1/10    Display Touch screen 10-Point capacitive touch Panel  10.1"LCD panel Resolution 1280*800 Active area 217.4(H)x136.4mm(V) Display mode Normally black ,IPS Viewing angle 85/85/85/85/85(L/R/U/D) Contrast ratio 800 Luminance 280cd/m2 Aspect Ratio 16:10 Network WiFi  2.4/5GHz 802.11a/b/g/n Ethernet  100M/1000M ethernet Buletooth Bluetooth 4.0 Interface Card slot SD card USB   USB Host Micro USB  Micro USB OTG USB   USB for serial RJ45 with POE RJ45  POE  IEEE802.3af/at Power jack  DC power input Earphone 3.5mm earphone Media play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4K Audio format MP3/WMA/AAC etc. Photo  jpeg, png, etc. Other VESA  204.5mm NFC  NFC with 13.56M frequency)/RFID NXP Desfire Camera  2.0M/P,Front camera Microphone Microphone Speaker  2*1.5W LED Light bar LED light bar with RGB and mixed colour Working temp 0--40degree Certificates CE/FCC/RoHS Language Multi-language Accessories Adapter  Adapter,12V/1.5A User manual yes       Unit (Without packaging)     Giftbox (With Packaging)     Carton 5pcs/CTN   L  W  H  L  W  H  L  W  H  275.36mm 170.36mm 25mm 390mm 220mm 68mm 405mm 363mm 240mm Net(kg) 0.74KG   Net(kg) 2.3KG              

System CPU       RK3576S Quad core cortex A53+Quad core cortex A72                   RAM       4GB                   Internal memory      32GB                   Operation system     Android 16                       Touch screen     10-Point capacitive touch                   Display Panel       10.1"LCD  panel                   Panel Type      IPS                   Resolution     1280*800                   Display Colors     16.7M Colors                   Viewing angle     R/L 85/85, U/D 85/85                   Display mode     Normally black                    Contrast ratio     1500:1                   Response Time     25ms                    Back-light Type     ELed                   Luminance     280cd/m2                   Aspect Ratio     ,16:10                   Network WiFi       IEEE 802.11a/b/g/n/ac/ax               Buletooth       Bluetooth 5.4                 Ethernet       10M/100M/1000M ethernet                   Interface SIM Slot       4G Flow Card                   SD Slot SD card ,Max support to 64GB                   Earphone     3.5mm earphone + Microphone                   USB        USB 3.0 host                   USB        USB for serial (TTL Level ) ,Optional USB Host                   RJ45        Ethernet interface                   Type-C       Only supports ADB function                   Power jack      DC power input                   Media play Video format     MPEG-1,MPEG-2,MPEG-4,H.265,H.264,VP9,AV1, AVS2,MVC,AVC ,etc., support up to 4K                   Audio format     MP3/WMA/AAC/WAV/OGG, etc                   Photo       JPEG/PNG/GIF,etc                   Other Product Colors     White/Black                   VESA       75*75 mm                   Button       Power                   G-sensor       Support  90 degrees                   Speaker       2*2W                   Microphone     Single microphone                   NFC       Optional,13.56MHz,ISO/IEC 18092, ISO/IEC 21481, ISO/IEC 14443 A&B, ISO/IEC 15693, Japanese Industrial Standard (JIS) (X) 6319-4, MIFARE Classic encrypted tags and cards RFID       Optional ,125k,ISO/IEC 11784/11785,EM4100,TK4100/GK4100                   LED light bar     LED light bar with RGB and mixed color                   Camera       Routine  angle  5.0MP with mipi                   4G Moduel     Optional                     Language     Multi-language                   Certificates     CCC/CE/FCC                   POE       Support IEEE802.3at,up to 30W   Working Surrounding Working Temperature     0°C---40°C                   Storage Temperature     -20°C---60°C                   Working Humidity     20~80%RH                   Storage Humidity     10~95%RH                   Accessories Adapter       Adapter,12V/1.5A                   User manual     *1