Radxa Rock 3B 4GB/32 RK3568 Quad-core Cortex-A55, frequency 2Ghz Mali G52 4GB LPDDR4

ROCK PI 4 Accessory Power Supply Adapter QC 3.0 Input: AC110-240V 50/60Hz 0.3A Output: DC5V=2.6A / 9V=1.7A / 12V=1.3A  

Works with both ROCK PI 4A/ 4B versions. The new M.2 Extension Board v1.6 has been improved based on community feedback. Improvements: Gold-plated connectors for stable data transfer In the previous version, the connectors were simple FPC connectors. They could break easily, and the ribbon cable could be mounted incorrectly. The connectors not only prevent the cable from being inserted incorrectly, but also have a lock to prevent the connector from moving. Improved ribbon cable with mounted gold-plated connectors on both sides. The previous ribbon cable was always the subject of discussion. People complained that the cable did not provide stable data transmission because the connection through the FPC connector was not precise and good enough. They also said that interference could occur because ground wires were not used for insulation within the ribbon cable. Both of these problems were addressed. Not only does the cable now have gold-plated connectors on both sides, but the layout pays close attention to shielding between the high-speed data lines. An intelligent layout ensures that no data is lost. The connectors have additional springs to ensure a stable connection even when the board is moved. The only drawback now is the fact that the cable length can no longer be easily adjusted with replacement cables. Newly designed interface board to the M.2 connector of the Rock Pi 4 The mounting of the M.2 board with simultaneous use of the EMMC has been improved. The product includes: M.2 expansion card Mini PCB adapter to connect to the on-board M.2 connector High performance flat ribbon cable Mounting bolts and screws  

Rock Pi 4 zbh. EMMC 5.0 16GB also fits for ODroid

Rock Pi 4 zbh. EMMC 5.0 32GB also fits for ODroid

Rock Pi 4 zbh. EMMC 5.0 64GB also fits ODroid

Rock Pi 4 zbh. EMMC 5.0 128GB also fits ODroid

Rock Pi 4 zbh. eMMC to Micro-SD fits for all devices that have a Micro-USB port i.e. you can equip your Raspberry PI/BananaPI/Lemaker/Friendly Elec/Khadas etc. all devices that have a Micro-USB port with a fast EMMC memory module/Flash.

Rock Pi 4 zbh. RTC Battery 3.0V / CR2032 CMOS battery CR2032 with plug, backup lithium battery, plug approx. 3.2x4mm" CR2032 with plug approx. 3.2x4mm Battery CR2032 complete with lugs, plug approx. 3.2x4mm Model CR2032 System Manganese dioxide–Li/Organic Electrolyte Nominal Voltage (V) 3 Nominal Capacity (mAh)* 220 Nominal Discharge Current (mA) 0.2 Operating Temperature Range (deg. C)** –20 to +85 Weight (g)*** 3.0 Dimensions (mm)*** Diameter 20.0 Height 3.2 UL Recognition MH12568 CMOS battery CR2032 with plug, backup lithium battery, plug approx. 3.2x4mm suitable for Battery AHL03003095, AHL03002111, CR2032-2E31R, CR2032-TPX battery Compaq Presario V6000, Presario V6100, Presario V6400 HP G6000, G6030, G6031, G6032, G7000 HP Pavilion dv6000, Pavilion dv6100, Pavilion dv6101, Pavilion dv6102, Pavilion dv6103, Pavilion dv6104, Pavilion dv6105, Pavilion dv6106, Pavilion dv6107, Pavilion dv6108, Pavilion dv6109, Pavilion dv6110, Pavilion dv6111, Pavilion dv6112, Pavilion dv6113, Pavilion dv6114, Pavilion dv6115, Pavilion dv6116, Pavilion dv6117, Pavilion dv6118, Pavilion dv6119, Pavilion dv6120, Pavilion dv6121, Pavilion dv6122, Pavilion dv6123, Pavilion dv6124, Pavilion dv6125, Pavilion dv6126, Pavilion dv6127, Pavilion dv6128, Pavilion dv6129, Pavilion dv6130, Pavilion dv6131, Pavilion dv6132, Pavilion dv6133, Pavilion dv6134, Pavilion dv6135, Pavilion dv6136, Pavilion dv6137, Pavilion dv6138, Pavilion dv6139, Pavilion dv6140, Pavilion dv6141, Pavilion dv6142, Pavilion dv6143, Pavilion dv6144, Pavilion dv6145, Pavilion dv6146, Pavilion dv6147, Pavilion dv6148, Pavilion dv6149, Pavilion dv6150, Pavilion dv6151, Pavilion dv6152, Pavilion dv6153, Pavilion dv6154, Pavilion dv6155, Pavilion dv6156, Pavilion dv6157, Pavilion dv6158, Pavilion dv6159, Pavilion dv6160, Pavilion dv6161, Pavilion dv6162, Pavilion dv6163, Pavilion dv6164, Pavilion dv6165, Pavilion dv6166, Pavilion dv6167, Pavilion dv6168, Pavilion dv6169, Pavilion dv6170, Pavilion dv6171, Pavilion dv6172, Pavilion dv6174, Pavilion dv6175, Pavilion dv6180, Pavilion dv6181, Pavilion dv6182, Pavilion dv6183, Pavilion dv6184, Pavilion dv6185, Pavilion dv6186, Pavilion dv6187, Pavilion dv6188, Pavilion dv6189, Pavilion dv6190, Pavilion dv6191, Pavilion dv6195, Pavilion dv6196, Pavilion dv6197, Pavilion dv6198, Pavilion dv6199, Pavilion dv6200, Pavilion dv6203, Pavilion dv6215, Pavilion dv6216, Pavilion dv6300, Pavilion dv6500, Pavilion dv6700 HP Pavilion dv9000, Pavilion dv9001, Pavilion dv9002, Pavilion dv9003, Pavilion dv9004, Pavilion dv9005, Pavilion dv9006, Pavilion dv9007, Pavilion dv9008, Pavilion dv9009, Pavilion dv9010, Pavilion dv9011, Pavilion dv9012, Pavilion dv9013, Pavilion dv9014, Pavilion dv9015, Pavilion dv9016, Pavilion dv9017, Pavilion dv9018, Pavilion dv9019, Pavilion dv9020, Pavilion dv9021, Pavilion dv9022, Pavilion dv9024, Pavilion dv9030, Pavilion dv9033, Pavilion dv9035, Pavilion dv9036, Pavilion dv9037, Pavilion dv9038, Pavilion dv9039, Pavilion dv9040, Pavilion dv9041, Pavilion dv9042, Pavilion dv9043, Pavilion dv9044, Pavilion dv9045, Pavilion dv9046, Pavilion dv9047, Pavilion dv9048, Pavilion dv9049, Pavilion dv9050, Pavilion dv9051, Pavilion dv9052, Pavilion dv9053, Pavilion dv9054, Pavilion dv9055, Pavilion dv9056, Pavilion dv9057, Pavilion dv9058, Pavilion dv9059, Pavilion dv9060, Pavilion dv9061, Pavilion dv9064, Pavilion dv9065, Pavilion dv9066, Pavilion dv9067, Pavilion dv9068, Pavilion dv9072, Pavilion dv9073, Pavilion dv9074, Pavilion dv9075, Pavilion dv9076, Pavilion dv9077, Pavilion dv9078, Pavilion dv9079, Pavilion dv9080, Pavilion dv9081, Pavilion dv9082, Pavilion dv9083, Pavilion dv9084, Pavilion dv9085, Pavilion dv9086, Pavilion dv9087, Pavilion dv9088, Pavilion dv9089, Pavilion dv9090, Pavilion dv9091, Pavilion dv9092, Pavilion dv9093, Pavilion dv9094, Pavilion dv9095, Pavilion dv9096, Pavilion dv9097, Pavilion dv9098, Pavilion dv9099 Medion MD41300, MD41500, MD41567 Attention: Note polarity +/-, whether the same as the original connector of the battery, connector approx. 3.2x4mm! Battery CR2032 complete with lugs, shrink tubing, cable and plug. CMOS lithium battery IEC CR2032 lithium button cell with cable and plug, e.g. suitable for the HP Pavilion DV6000, Pavilion DV6100, Pavilion DV6200, Pavilion DV6300, Pavilion DV6500, Pavilion DV9000, Presario V6000, Presario V6100, Presario V6400 backup battery. Supplied as a battery with plug and shrink sleeve. Technical data: System: Lithium battery (non-rechargeable), voltage: 3.0 volts, capacity: 200mAh up to 220mAh, dimensions: approx. 20.2 x 3.5mm (can also be larger due to the shrink sleeve), weight: 12 grams, connector approx. 3.2x4mm

USB-to-serial cable with FT232RL With this cable you can easily connect your Rock Pi to a PC system. The cable simultaneously provides 5 V at 500 mA via the PC's USB port, so you don't need to use a separate power supply. The serial FT232RL integrated into the cable enables data exchange between the two devices. Industrial USB to RS232/485/TTL isolated converter with original FT232RL This converter is designed for industrial applications and offers originality and reliability with the FT232RL chip inside. It has embedded protection circuits such as current isolation, ADI magnetic isolation and TVS diode. In addition, the USB to RS232/485/TTL converter is embedded in an aluminium alloy housing, making it robust and durable. The product is user-friendly and enables fully automatic data transfer without delay. Its fast communication, stability, reliability and security make it the ideal choice for industrial control equipment and/or applications with high communication requirements. Features: USB to RS232, USB to RS485, USB to TTL (UART) Original FT232RL chip for fast and stable communication and better compatibility Integrated current isolation and magnetic isolation for stable voltage without additional power supply TVS diode for effective suppression of voltage peaks and transients in the circuit, for lightning protection and antistatic properties Automatic transceiver without delay for fast and stable communication without mutual interference Aluminium alloy housing with sandblasting and anodic oxidation for robustness and durability 3 LEDs for displaying power and transceiver status Specifications: Product type: Industrial optically isolated converter Baudrate: 300-921600bps Host connection: USB Device connection: RS485/RS232/TTL Operating environment: -15? ~ 70?, 5%RH ~ 95%RH Supported operating systems: Windows 10 / 8.1 / 8 / 7 / XP Note: When connecting multiple devices, it is recommended to connect 120Ω resistors to the first and last device to ensure optimum performance. PIN connector assignment: Red = Power +5 V Black = Ground White = RX Green = TX

Rock Pi adapter SD card - MicroSD extension cable This extension cable can be used to extend a micro SD slot. Thanks to the flexibility of the cable it is possible to route the slot into a housing, for example. The cables are particularly suitable for Raspberry Pi, Rock Pi etc. Connection: micro SD plug -> micro SD socket / slot (with push/eject function) For micro SD/SDHC cards Colour: white; Cable length: approx. 15cm  

Rock Pi adapter SD card - MicroSD extension cable This extension cable can be used to extend a micro SD slot. Thanks to the flexibility of the cable, it is possible to move the slot into a housing, for example. The cables are particularly suitable for Raspberry Pi, Rock Pi etc. Connection: micro SD plug -> SD socket / slot (with push/eject function) Für SD/SDHC cards Colour: white Cable length: approx. 15cm Same article as 162898

Rock Pi 4 zbh. Proto Hat / Shield The perfect Prototyping HAT for your development based on ROCK PI 4! LEDs for 3.3V and 5V Fuse protection for the ROCK PI Complete flexibility on your layout Perfectly fits on top of your board Set of 3 HAT´s

Rock Pi 4 zbh. USB 3.0 Male Type A to A for USB Firmaware upgrading, USB gadgets and Android ADB debug

Rock Pi 4 zbh. USB 2.0 Male Type A to C 3A 1,5m

Klassifizierung: UHS-I, Class 10 • lesen: 85mb/s • schreiben: 16MB/s • Besonderheiten: inkl. SD-Adapter

• Klassifizierung: UHS-I U3, Class 10 • Lesen: 95MB/s • Schreiben: 90MB/s • Besonderheiten: SD-Adapter

• Klassifizierung: UHS-I, Class 10 • lesen: 85MB/s • schreiben: 21MB/s • Besonderheiten: inkl. SD-Adapter

Klassifizierung: UHS-I, Class 10 • lesen: 85mb/s • schreiben: 20MB/s • Besonderheiten: inkl. SD-Adapter

• Klassifizierung: Class 10 • lesen: 85MB/s • schreiben: 20MB/s EAN/UPC 3126170142252 Lieferumfang 1x microSDHC 16 GB Marke EMTEC Maße 0,1 x 1 cm Modell microSDHC Produkttyp micro SDHC Speicherkapazität 16 GB Übertragungsgeschwindigkeit (r) 85 MB/s Übertragungsgeschwindigkeit (w) 20 MB/s

• Klassifizierung: UHS-I U1, Class 10 • Lesen: 80MB/s • Schreiben: 50MB/s • Besonderheiten: erweiterter Betriebstemperaturbereich (-25/85°C) • Herstellergarantie: drei Jahre

- Classification: UHS-3, Class 10 - read: 95MB/s - write: 90MB/s - features: incl. SD adapter Compatible with all devices supporting SDXC standards Read speed: Up to 100 MB/s Write speed: Up to 95 MB/s UHS-I U3 V30 Compatibility. Specifications: A1/A2 compatibility for Android device memory expansion.

The adapter with real USB3.0 performance! The perfect tool for transferring your software images to your eMMC module at USB3.1 speed. - GL3227E controller chip - Write speed up to 150MB/s - Double mounting for eMMC module - Supports ROCK PI eMMC modules up to 128GB - Compatible with ODROID / Pine64 eMMC modules Use your old eMMC module as a USB stick! Supports Windows and Linux

The perfect case for getting started with ROCK PI 4!     Aluminium housing     Rock PI large casing must be used.     easy assembly Sufficient height for the integration of the M.2 expansion board including optional cooling unit for SSD Ventilation openings in the acrylic cover     external access to the SD card slot     external access to M.2 slot      Opening for power and activity LEDs Acrylic cover for perfect signal strength of WIFI and Bluetooth     build the system out of the housing and mount it easily after completion.     Available in 3 different colours Scope of delivery:     Aluminium handle     Acrylic cover     Screws     Silicone moulding     Copper bolts for mounting  

The RADXA M.2 WiFi 6 and BT5.2 wireless module A8  Radxa Wireless Module A8, an M.2 WiFi 6 and BT5.2 combination module based on Realtek RTL8852BE It has the following features: IEEE 802.11a/b/g/n/ac/ax-compatible WLAN DBBT5.0 (BT 5.2 compliant) Full 802.11n MIMO solution for 2.4GHz and 5Ghz band Maximum PHY data rate up to 286.8 Mbps at 20MHz bandwidth 573.5 Mbps at 40MHz bandwidth 1201Mbps at 80MHz bandwidth Backwards compatible with 802.11a/b/g devices when operating at 802.11n data rates Deviation-compatible with 802.11a/n/ac devices operating at 802.11ax data rates Compliance with the FIPS 140-2 security requirements implemented by the Windows operating system as host Support 20/40/80MHz 5GHz supports WLAN-Bluetooth coexistence supports low-power Bluetooth Supports the Bluetooth 5 system (BT 5.2 logo compliant) Compatible with Bluetooth v2.1+EDR 2x uFL connection Support for ROCK 3A and ROCK 5B  

Gigabit non-isolated PD PoE splitter can support IEEE802.3af/at standard, compatible with 12/36 &45/78 dual mode power supply. input voltage: 44-57VDC, output voltage: 5V or 12VDC, and maximum full load power is 24W. Hightlights: Gigabit rate self-adaption, 8P copper cable RJ45 port. Support IEEE802.3af/at standard, Both mid-span ( 4/5+, 7/8- ) and end-span ( 1/2+, 3/6- ) Output voltage 5V/12VDC optional, suitable for various network terminals Input voltage 44-57VDC, rated output power 12W, greater than 82% efficiency Short circuit, over-current and over-temperature protection 2000V high voltage isolation (input stage to output stage), less than 200mV output ripple Incl. approx. 10cm long hollow plug cable on hollow plug outside= 5,5mm & inside 2,1mm for direct connection to terminals with hollow plug socket ALL-PS102G-AF-AT is a gigabit PD PoE splitter independently developed by ALLNET. It has a 1*RJ45 input port, 1*RJ45 output port, and 1*DC 5,5mm / 2,1mm socket. Its DC5V/12V output voltage selection switch is to meet the use of various non-PoE network terminals to connect to PoE switches. Effectively solving security monitoring, wireless networks, Limited by the power line layout, reduced system wiring, improved system stability and safety, and reduced maintenance costs. ALL-PS102G-AF-AT PoE splitter adopts ABS and PC flame-retardant plastic material. It complies with IEEE802.3 af/at PoE standard, end-span (1,2+, 3,6-), and mid-span (4,5+, 7,8-) two power supply modes. The output power is up to 24W. Low ripple, >82% efficiency, 2KV port protection isolation. It has short-circuit, over-current, over-temperature protection. Plug and play, no configuration, easy to use. Technical Details: Model ALL-PS102G-AF-AT Interface Characteristics Fixed Port 2*10/100/1000Base-T RJ45 ports (Data) 1*DC5521 power socket(Power) Ethernet Port Ethernet port can support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption Network Characteristics Transmission Bandwidth (Rate) 10/100/1000Mbps Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter) Output VoltageSwitch 12V: DC12Voutput voltage (default) 5V: DC5Voutput voltage Network Protocol and Indicator Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T IEEE802.3x LED Indicator PoE indicator: POE (green), Power indicator: PWR (green) PoE & Power Supply PoE Port (PD) PD port IEEE802.3af/at @ POE   IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3x Power Supply Pin 1/2 (+), 3/6 (-),& 4/5 (+), 7/8 (-) Input Voltage 44-57VDC Output Voltage Default 12VDC ±0.5V, optional 5VDC ±0.5V Power Consumption Standby<1W, Full Load<24W Conversion Efficiency (Output: Input) ≥82% Physical Parameter Operation TEMP / Humidity -20~+55°C, 5%~90% RH Non condensing Storage TEMP / Humidity -40~+85°C, 5%~95% RH Non condensing Dimension (L*W*H) 103*50*29mm Net /Gross Weight <0.08kg /<0.1kg Lightning protection / protection level Lightning protection: 4KV 8/20us; Protection level: IP30 Marks CE

ALLNET Air Mouse G10 Pro Remote Control 2.4GHz USB Dongle with Infrared Discover the freedom and flexibility of the new Air Mouse! With our innovative technology you can control your computer or smart TV in a completely new way. Thanks to Air Mouse, you can move freely around the room and still use all the features of your device. Easy to use, Air Mouse offers intuitive controls that allow you to navigate your favorite apps, edit documents, or enjoy movies and videos - all from a distance! No more cumbersome cables or a confusing touchpad. With Air Mouse, you have complete control of your device in the palm of your hand - or rather, in the air! Our Air Mouse is perfect for use in the office, at home, or while traveling. It's lightweight and compact, and fits perfectly in your pocket. With its sleek design, it not only looks good, it feels good too, giving you a comfortable and seamless user experience. Experience the future of control technology with Air Mouse. Order today and experience the freedom and flexibility you deserve! For Android, Windows, Mac, Linux Small compact Airmouse remote control 2.4GHz with up to 10m range Infrared signals can be taught Switch between buttons and mouse function Cursor speed adjustable