Product information "Rock Pi E zbh. DEVELOPERS PACKAGE Gehäuse mit Antenne und St"
Rock Pi E-based development made convenient!
Board protection with acrylic cover
Easy access to all relevant parts of the board
Includes GPIO extension pin header
Cut-out for easy removal and installation of the eMMC module
Includes dual-band antenna
Contents of the product:
Acrylic cover with mounting screws and bolts
40-pin GPIO extension pin header
2.4/5GHz antenna set with pigtail
Simply add the Rock Pi E of your choice and you're ready to go!
Product without the Rock Pi E shown! This is for illustrative purposes.
Rock Pi 4 zbh. eMMC to Micro-SD
fits for all devices that have a Micro-USB port i.e. you can equip your Raspberry PI/BananaPI/Lemaker/Friendly Elec/Khadas etc. all devices that have a Micro-USB port with a fast EMMC memory module/Flash.
The adapter with real USB3.0 performance!
The perfect tool for transferring your software images to your eMMC module at USB3.1 speed.
- GL3227E controller chip
- Write speed up to 150MB/s
- Double mounting for eMMC module
- Supports ROCK PI eMMC modules up to 128GB
- Compatible with ODROID / Pine64 eMMC modules
Use your old eMMC module as a USB stick!
Supports Windows and Linux
Rock Pi 4 zbh. USB 2.0 Male Type A to C 3A 1,5m Power cable for QC
For your convenient powering of SBC´s this USB-A to USB-C cable with the integrated power switch and data connection makes turning on and off as easy as a flip of your fingers. data cable QC3.0, PD compatible length 1m LED indicator for power on color black
Rock Pi E-based development made convenient!
Board protection with acrylic cover
Easy access to all relevant parts of the board
Includes GPIO extension pin header
Cut-out for easy removal and installation of the eMMC module
Includes dual-band antenna
Contents of the product:
Acrylic cover with mounting screws and bolts
40-pin GPIO extension pin header
2.4/5GHz antenna set with pigtail
Simply add the Rock Pi E of your choice and you're ready to go!
Product without the Rock Pi E shown! This is for illustrative purposes.
Gigabit non-isolated PD PoE splitter can support IEEE802.3af/at standard, compatible with 12/36 &45/78 dual mode power supply. input voltage: 44-57VDC, output voltage: 5V or 12VDC, and maximum full load power is 24W.
Hightlights:
Gigabit rate self-adaption, 8P copper cable RJ45 port.
Support IEEE802.3af/at standard, Both mid-span ( 4/5+, 7/8- ) and end-span ( 1/2+, 3/6- )
Output voltage 5V/12VDC optional, suitable for various network terminals
Input voltage 44-57VDC, rated output power 12W, greater than 82% efficiency
Short circuit, over-current and over-temperature protection
2000V high voltage isolation (input stage to output stage), less than 200mV output ripple
Incl. approx. 10cm long hollow plug cable on hollow plug outside= 5,5mm & inside 2,1mm for direct connection to terminals with hollow plug socket
ALL-PS102G-AF-AT is a gigabit PD PoE splitter independently developed by ALLNET. It has a 1*RJ45 input port, 1*RJ45 output port, and 1*DC 5,5mm / 2,1mm socket. Its DC5V/12V output voltage selection switch is to meet the use of various non-PoE network terminals to connect to PoE switches. Effectively solving security monitoring, wireless networks, Limited by the power line layout, reduced system wiring, improved system stability and safety, and reduced maintenance costs.
ALL-PS102G-AF-AT PoE splitter adopts ABS and PC flame-retardant plastic material. It complies with IEEE802.3 af/at PoE standard, end-span (1,2+, 3,6-), and mid-span (4,5+, 7,8-) two power supply modes. The output power is up to 24W. Low ripple, >82% efficiency, 2KV port protection isolation. It has short-circuit, over-current, over-temperature protection. Plug and play, no configuration, easy to use.
Technical Details:
Model
ALL-PS102G-AF-AT
Interface Characteristics
Fixed Port
2*10/100/1000Base-T RJ45 ports (Data)
1*DC5521 power socket(Power)
Ethernet Port
Ethernet port can support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption
Network Characteristics
Transmission Bandwidth (Rate)
10/100/1000Mbps
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T:Cat5e or later UTP(≤100 meter)
Output VoltageSwitch
12V: DC12Voutput voltage (default)
5V: DC5Voutput voltage
Network Protocol and Indicator
Network Protocol
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T
IEEE802.3x
LED Indicator
PoE indicator: POE (green), Power indicator: PWR (green)
PoE & Power Supply
PoE Port (PD)
PD port IEEE802.3af/at @ POE
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX, IEEE802.3x
Power Supply Pin
1/2 (+), 3/6 (-),& 4/5 (+), 7/8 (-)
Input Voltage
44-57VDC
Output Voltage
Default 12VDC ±0.5V, optional 5VDC ±0.5V
Power Consumption
Standby<1W, Full Load<24W
Conversion Efficiency (Output: Input)
≥82%
Physical Parameter
Operation TEMP / Humidity
-20~+55°C, 5%~90% RH Non condensing
Storage TEMP / Humidity
-40~+85°C, 5%~95% RH Non condensing
Dimension (L*W*H)
103*50*29mm
Net /Gross Weight
<0.08kg /<0.1kg
Lightning protection / protection level
Lightning protection: 4KV 8/20us; Protection level: IP30
Marks
CE
Product number:210354
Manufacturer Number:ALL-PS102G-AF-AT
Stock:
6x
Available, delivery time: 1-5 Tage
This website uses cookies to ensure the best experience possible. More information...