Rock Pi S - 512MB, 4GByte NAND SLC FLash mit PoE Pins, BT und WiFi

ROCK PI 4 Accessory Power Supply Adapter QC 3.0 Input: AC110-240V 50/60Hz 0.3A Output: DC5V=2.6A / 9V=1.7A / 12V=1.3A  

USB-to-serial cable with FT232RL With this cable you can easily connect your Rock Pi to a PC system. The cable simultaneously provides 5 V at 500 mA via the PC's USB port, so you don't need to use a separate power supply. The serial FT232RL integrated into the cable enables data exchange between the two devices. Industrial USB to RS232/485/TTL isolated converter with original FT232RL This converter is designed for industrial applications and offers originality and reliability with the FT232RL chip inside. It has embedded protection circuits such as current isolation, ADI magnetic isolation and TVS diode. In addition, the USB to RS232/485/TTL converter is embedded in an aluminium alloy housing, making it robust and durable. The product is user-friendly and enables fully automatic data transfer without delay. Its fast communication, stability, reliability and security make it the ideal choice for industrial control equipment and/or applications with high communication requirements. Features: USB to RS232, USB to RS485, USB to TTL (UART) Original FT232RL chip for fast and stable communication and better compatibility Integrated current isolation and magnetic isolation for stable voltage without additional power supply TVS diode for effective suppression of voltage peaks and transients in the circuit, for lightning protection and antistatic properties Automatic transceiver without delay for fast and stable communication without mutual interference Aluminium alloy housing with sandblasting and anodic oxidation for robustness and durability 3 LEDs for displaying power and transceiver status Specifications: Product type: Industrial optically isolated converter Baudrate: 300-921600bps Host connection: USB Device connection: RS485/RS232/TTL Operating environment: -15? ~ 70?, 5%RH ~ 95%RH Supported operating systems: Windows 10 / 8.1 / 8 / 7 / XP Note: When connecting multiple devices, it is recommended to connect 120Ω resistors to the first and last device to ensure optimum performance. PIN connector assignment: Red = Power +5 V Black = Ground White = RX Green = TX

Rock Pi adapter SD card - MicroSD extension cable This extension cable can be used to extend a micro SD slot. Thanks to the flexibility of the cable it is possible to route the slot into a housing, for example. The cables are particularly suitable for Raspberry Pi, Rock Pi etc. Connection: micro SD plug -> micro SD socket / slot (with push/eject function) For micro SD/SDHC cards Colour: white; Cable length: approx. 15cm  

Rock Pi adapter SD card - MicroSD extension cable This extension cable can be used to extend a micro SD slot. Thanks to the flexibility of the cable, it is possible to move the slot into a housing, for example. The cables are particularly suitable for Raspberry Pi, Rock Pi etc. Connection: micro SD plug -> SD socket / slot (with push/eject function) Für SD/SDHC cards Colour: white Cable length: approx. 15cm Same article as 162898

Rock Pi 4 zbh. USB 3.0 Male Type A to A for USB Firmaware upgrading, USB gadgets and Android ADB debug

Rock Pi 4 zbh. USB 2.0 Male Type A to C 3A 1,5m

Universal power supply 5V3A fixed cable to USB-C Daten: Input : 100V - 240V ~50-60Hz 0,5A Output: 5V ---3000mA Energy Efficiency Class: VI Kabel 2m AWG20 USB-C

Klassifizierung: UHS-I, Class 10 • lesen: 85mb/s • schreiben: 16MB/s • Besonderheiten: inkl. SD-Adapter

• Klassifizierung: UHS-I U3, Class 10 • Lesen: 95MB/s • Schreiben: 90MB/s • Besonderheiten: SD-Adapter

• Klassifizierung: UHS-I, Class 10 • lesen: 85MB/s • schreiben: 21MB/s • Besonderheiten: inkl. SD-Adapter

Klassifizierung: UHS-I, Class 10 • lesen: 85mb/s • schreiben: 20MB/s • Besonderheiten: inkl. SD-Adapter

• Klassifizierung: Class 10 • lesen: 85MB/s • schreiben: 20MB/s EAN/UPC 3126170142252 Lieferumfang 1x microSDHC 16 GB Marke EMTEC Maße 0,1 x 1 cm Modell microSDHC Produkttyp micro SDHC Speicherkapazität 16 GB Übertragungsgeschwindigkeit (r) 85 MB/s Übertragungsgeschwindigkeit (w) 20 MB/s

• Klassifizierung: UHS-I U1, Class 10 • Lesen: 80MB/s • Schreiben: 50MB/s • Besonderheiten: erweiterter Betriebstemperaturbereich (-25/85°C) • Herstellergarantie: drei Jahre

- Classification: UHS-3, Class 10 - read: 95MB/s - write: 90MB/s - features: incl. SD adapter Compatible with all devices supporting SDXC standards Read speed: Up to 100 MB/s Write speed: Up to 95 MB/s UHS-I U3 V30 Compatibility. Specifications: A1/A2 compatibility for Android device memory expansion.

Gigabit non-isolated PD PoE splitter can support IEEE802.3af/at standard, compatible with 12/36 &45/78 dual mode power supply. input voltage: 44-57VDC, output voltage: 5V or 12VDC, and maximum full load power is 24W. Hightlights: Gigabit rate self-adaption, 8P copper cable RJ45 port. Support IEEE802.3af/at standard, Both mid-span ( 4/5+, 7/8- ) and end-span ( 1/2+, 3/6- ) Output voltage 5V/12VDC optional, suitable for various network terminals Input voltage 44-57VDC, rated output power 12W, greater than 82% efficiency Short circuit, over-current and over-temperature protection 2000V high voltage isolation (input stage to output stage), less than 200mV output ripple Incl. approx. 10cm long hollow plug cable on hollow plug outside= 5,5mm & inside 2,1mm for direct connection to terminals with hollow plug socket ALL-PS102G-AF-AT is a gigabit PD PoE splitter independently developed by ALLNET. It has a 1*RJ45 input port, 1*RJ45 output port, and 1*DC 5,5mm / 2,1mm socket. Its DC5V/12V output voltage selection switch is to meet the use of various non-PoE network terminals to connect to PoE switches. Effectively solving security monitoring, wireless networks, Limited by the power line layout, reduced system wiring, improved system stability and safety, and reduced maintenance costs. ALL-PS102G-AF-AT PoE splitter adopts ABS and PC flame-retardant plastic material. It complies with IEEE802.3 af/at PoE standard, end-span (1,2+, 3,6-), and mid-span (4,5+, 7,8-) two power supply modes. The output power is up to 24W. Low ripple, >82% efficiency, 2KV port protection isolation. It has short-circuit, over-current, over-temperature protection. Plug and play, no configuration, easy to use. Technical Details: Model ALL-PS102G-AF-AT Interface Characteristics Fixed Port 2*10/100/1000Base-T RJ45 ports (Data) 1*DC5521 power socket(Power) Ethernet Port Ethernet port can support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption Network Characteristics Transmission Bandwidth (Rate) 10/100/1000Mbps Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter) Output VoltageSwitch 12V: DC12Voutput voltage (default) 5V: DC5Voutput voltage Network Protocol and Indicator Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T IEEE802.3x LED Indicator PoE indicator: POE (green), Power indicator: PWR (green) PoE & Power Supply PoE Port (PD) PD port IEEE802.3af/at @ POE   IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX, IEEE802.3x Power Supply Pin 1/2 (+), 3/6 (-),& 4/5 (+), 7/8 (-) Input Voltage 44-57VDC Output Voltage Default 12VDC ±0.5V, optional 5VDC ±0.5V Power Consumption Standby<1W, Full Load<24W Conversion Efficiency (Output: Input) ≥82% Physical Parameter Operation TEMP / Humidity -20~+55°C, 5%~90% RH Non condensing Storage TEMP / Humidity -40~+85°C, 5%~95% RH Non condensing Dimension (L*W*H) 103*50*29mm Net /Gross Weight <0.08kg /<0.1kg Lightning protection / protection level Lightning protection: 4KV 8/20us; Protection level: IP30 Marks CE