Synergy 21 LED-Flex-Streifen 30 WW DC12V 12W IP20

Hollow socket (DC socket) with screw terminals 2.1 x 5.5 mm. Suitable for Synergy21 LED Strips, etc. The connection of the plugs is not standardised. The outer conductor is often negative. Length/width/height in mm 39.5/14.6/13 Weight: 7 grammes

Hollow plug (DC plug) 2.1 x 5.5 mm with screw terminals. Suitable for Synergy21 LED Strips, etc. Plug: 2.1 x 5.5 mm The connection of the plugs is not standardised. The outer conductor is often negative. Length/width/height in mm 38.5/13.9/12.8 Weight: 5.5 grammes

LED strip mounting clip made of silicone 10 pieces pack 10clamps

LPV-150-12 Input: 180~305VAC, 254~431VDC Output: 10A, 12V DC, 120W Operating temperature: -25°C to +65°C LxWxH 191x63x37.5mm Please refer to the data sheet for exact technical details. The connection of electrical components and systems may only be carried out by only be carried out by qualified specialists!

LED power supply unit for flush-mounted boxes Output: DC 12V, 1.A, max. 12 Watt Input: AC 100-240Vac Weight: 100g Size: 55*22mm

Löt shrink connector – Waterproof IP67 Löt heat shrink connector – Waterproof IP67 Waterproof solder sleeves (Solder Sleeves) for fast, secure and tight cable connections. Integrated tin ring for the electrical connection, outer heat-shrinkable sleeve with hot-melt adhesive seal for reliable sealing (IP67). Advantages Soldering, shrinking and sealing in a single work step Weather, vibration and corrosion resistance (IP67) No crimping pliers required ; hot air is sufficient Ideal for cars, motorbikes, boats, outdoor electrics and electronics Technical details   Colour Conductor cross-section (mm²) AWG Length (mm) Typical application White 0,25–0,34 26–24 26 Dünne signal lines Red 0.5–1.0 22–18 40 Electronics/automotive cables Blue 1.5–2.5 16–14 40 Standard power cable Yellow 4.0–6.0 12–10 40 Stronger supply lines Key points Soldering, shrinking & sealing in one step Waterproof (IP67) and corrosion-resistant Integrated tin ring for secure electrical connection Heat-shrinkable outer jacket with hot-melt adhesive seal No crimping tool required – only hot air or lighter Ideal for automotive, boat, motorbike, electronics & outdoor wiring Note on the application Stripping the conductor, twisting it and pushing it into the connector (overlap the wires in the tin ring). Heat with hot air from the centre (tin ring) towards the ends until tin flows and adhesive emerges. Let cool, carry out a tensile test. Only for copper conductors.

Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS

Hosing: PA66 O-ring: silicone Conductor material: cooper Cable range: 13.5mm~17mm Cable size: 4mm2 Temperature: 85°C Voltage: 250V Ingress protection: IP68 Fire classification: 94V0

Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS Dimension: W=6,5cm, L=10cm

IP68 cable connector with 2 compartment terminal Voltage: 450V Current: 32A  IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm

IP68 cable connector with 3 compartment terminal Voltage: 450V Current: 32A  IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm

250V/450V PTI250, T85 IP68 at 5 bar, 24A Contains an internal screw connector insert for up to 5 cables, which can be which can be connected at both ends. Rubber inserts for different cable diameters for sealing are included in the included in the scope of delivery. Min. Ø5mm to max. Ø14mm cable diameter

Waterproof junction boxes with terminal blocks, cable to cable 250V/450V PTI 250, T50 IP68 16A Min. Ø5mm, Max. Ø14mm